Re-lock Diamond "radio part" - Touch Diamond, MDA Compact IV ROM Development

Hi everyone,i need to take back to origin my diamond,cos i need warranty assistance...i flashed official rom,flashed hard-spl (i hope it's the right one,i put the 1.37,i purchased the phone a year ago),but i don't know how to re-lock the radio part...i used cmonex programs to unlock it,how can i revert back?
And i'm even a little scared,'cos i wonder i had to lock it again before flashing default spl (everything works fine,though)

Related

WM5 ROM

Hi ,
I´m going to try and update my HTC s620 to WM6 from Tmobile,
but,
Where can i download the HTC ROM iff i would like to revert
meaning going back to wm5?
and is this possible?
cause i allso want to be sure that when htc comes out with there rom update i can update it to theres,
cause i think the tmobile rom has a lot of screens with there logo on?
and i dont like that
I have the WM5 HTC Rom (RUU_Excalibur_HTC_WWE_1.11.405.4_4.1.13.28_02.63.90_Ship.exe). It is over 37MB in size, I don't know how I could get it to you.
http://rapidshare.com/users/7UE30C
click on the folder button
super!
thanks man!
Do you also know iff it is possible to downgrade from wm6 to wm5, in case i dont like it, or like i mentioned above?
U have to have you phone CID unlocked. then you can go WM5<>WM6 no problem. ( take it back, actually i am not sure. If you going to play only with t-mobile ROM's, then CID unlocking might not be needed).
uwashock said:
U have to have you phone CID unlocked. then you can go WM5<>WM6 no problem. ( take it back, actually i am not sure. If you going to play only with t-mobile ROM's, then CID unlocking might not be needed).
Click to expand...
Click to collapse
The phone i have is from HTC it self, not Tmob.
So i know it has no simlock, i guess no cid lock too, but i dont understand cid lock will lock for that one here some where
Did anyone try to update/downgrade it allready?
I did. I have the T-Mobile Dash. It's not CID unlocked.
I downloaded WM6 and found that I couldn't use Missing Sync or send email, so I went online and downloaded the WM5 Rom from another forum (Howard I believe but I might be wrong).
It works just fine, I had no problems going back.
then ill try that, cause htc said it would not work, thanks
I tried using that Rom above but it gave me an error "Invalid Vendor ID" or something like that. I already CID unlocked (thats how I upgraded from ROgers WM 5 to Tmobile WM6). Can anyone tell me what I' doing wrong?
where can I find the tmobile wm5? i upgraded with their wm6 and would like to go back.

advice needed, NOT a support issue.

I just bought a TyTN (Herm 200) and I am so excited about putting WM6 on it. I have the HK WWE official release just sitting here on my desktop.
But:
HTC is going to make a Europe edition available soon. It might even have Mobile Office 2007 on it from scratch.
I am unsure if I can later update my TyTN to the European version if i put the HK version on now. What kind of problems might I run into?
My device comes with Swedish WM5, I imagine I can update it to WWE, but what about back to swedish later on, if I should want to do that?
If it was you, would you go ahead with the update to HK and if possible switch to European version later?
Yes I would. You can always switch later - you may need to CID unlock later or use a modified RUU, but you WILL be able to change later.
.
well, I am a bit hesitant to CID unlock my device since it is brand new and still under warranty. thanks for the heads up.
Will I even be able to put the HK WWE on my device without CID unlocking it?
Actually, you will probably not have to CID unlock the device at all. Oli built a custom RUU that bypasses the CID check without CID unlocking. I was juct throwing that in as a disclaimer since I have not tried it. I am SURE that it works though
http://forum.xda-developers.com/showthread.php?t=298737&highlight=custom+ruu
I can't stress this enough - put olipro 2.10 on it - this is reversible to the best of my knowledge (see vanx's guide in my sig) and this means that it doesn't need CID unlocking (thr RUU_Wrapper is not the bit that does the CID checking)
In any case, I don't very much whether or not, in the case of a warranty claim, anyone would spot the CID unlock or the SPL update (but still don't take my word for it
I've upgraded someone else's phone for them and I put olipro on which was a good job as it got interupted by his daughter pulling the cable out and it saved it from being a brick...
HTH,
Smiffy.
BTW, the cooked ROMs are so much better than the official dopod ROM - my preference is black satin or sleuth's but they're all better than the official one
OK thanks! Great info!

Newbie with 1 big question

Dear All,
first of all....HELLO! I've just registered myself on the forum.
Yesterday I bought the HTC P3600 (Trinity, I think), english version (I suppose it's called wwe). I want to install a cooked ITALIAN ROM, but I read I'm losing the guarantee if I'll do it.
Somebody tell me there is a software that can allow me to re-install the original ROM and avoid the guarantee losing.
Is this right? can someone give me more info?
Thanks in advance for your reply and sorry for my english
Best regards
You can always go back to an original HTC rom, as long as you don't brick your device.
In order to prevent that, you should install a Hard-SPL (board search, iirc its a sticky) which is a replacement bootloader that allows flashing any Rom after bricking.
Have fun playing around with your new P3600.
ZakMcRofl said:
You can always go back to an original HTC rom, as long as you don't brick your device.
In order to prevent that, you should install a Hard-SPL (board search, iirc its a sticky) which is a replacement bootloader that allows flashing any Rom after bricking.
Have fun playing around with your new P3600.
Click to expand...
Click to collapse
So if I install first the Hard-SPL I can install a COOKED ITALIAN ROM and after I can go back the original HTC ROM and I'll not lose my guarantee???
If I brick, how can I de-brick the HTC?
Thanks for the quickly reply
Best regards
You should try reading the WIKI and also check www.trinityguides.info
Helloo there.
Your phone is probably cid locked, that means, that u can install only original htc rom-wm5. wm6 doesnt exist for htc trinity.
If u have cid unlocked, u can flash any rom with the RUU (rom update utility) , which is in the package with the rom.
Otherwise i prefer for my cid locked trinity that:
http://forum.xda-developers.com/showthread.php?t=293632
U loose warranty if u send the broken pda on service with the custom rom installed on it. So, before u send it, flash the original rom over and it will be ok.
The problem could be, if the lcd goes bad, than its hard to reinstall the original rom. i know u understand.
badguy999 said:
Helloo there.
Your phone is probably cid locked, that means, that u can install only original htc rom-wm5. wm6 doesnt exist for htc trinity.
If u have cid unlocked, u can flash any rom with the RUU (rom update utility) , which is in the package with the rom.
Otherwise i prefer for my cid locked trinity that:
http://forum.xda-developers.com/showthread.php?t=293632
U loose warranty if u send the broken pda on service with the custom rom installed on it. So, before u send it, flash the original rom over and it will be ok.
The problem could be, if the lcd goes bad, than its hard to reinstall the original rom. i know u understand.
Click to expand...
Click to collapse
Thanks for your answer. I installed the SPL-1.20 and I updated my Radio version (1.46.00.11------is it good?). Now I can install every unofficial ROM and in any case I can go back (how?).
Is it right?
Best regards

Reverting to Stock Rom (Warranty Replacement)

Hi, I searched but couldn't quite find the anwser.
I am sending in my Vogue back to BELL for a warranty replacement. I have unlocked the phone and installed a custom rom (NFSAN 1.31 Bell).
I unlocked the phone using coke 2.31, and I need to relock and install the original Bell Rom before I send it off for warranty replacement. Any help is appreciated, as I don't know how to relock the device. I have the latest Bell rom ready to install, but I dont want the load screen to show coke-2.31 when it is being assessed for replacement.
ernestchi said:
Hi, I searched but couldn't quite find the anwser.
I am sending in my Vogue back to BELL for a warranty replacement. I have unlocked the phone and installed a custom rom (NFSAN 1.31 Bell).
I unlocked the phone using coke 2.31, and I need to relock and install the original Bell Rom before I send it off for warranty replacement. Any help is appreciated, as I don't know how to relock the device. I have the latest Bell rom ready to install, but I dont want the load screen to show coke-2.31 when it is being assessed for replacement.
Click to expand...
Click to collapse
Search for a vogue relocker.
Put this into google: "vogue relocker xda ppcgeeks"
without quotes, should pull up anything about a vogue relocker on ppcgeeks and xda. if i get some time i'll search for it also later tonight, but don't count on that!!
also before you relock it, you'll have to flash to bell's stock 6.1 rom.
search htc.com for that.
if you look good enough for those, you should find it.
I was able to relock the device by installing the coKe 0.40 unlocker, and then installing the stock Bell rom from the HTC site on top of that. It seems to have worked.
Is there any other way to verify that the device is locked and in its original state? How do i enter bootloading state without actually installing another ROM?
SPL-2.01.0000
CPLD-3
Is what the bootloader displays. I assume this means the device is in its original state?
press and hold the power and camera button and hit the soft reset button. Keep holding the power and camera buttons and it will bring you to the boot loader screen. I don't know what it should say if it's locked though
ernestchi said:
I was able to relock the device by installing the coKe 0.40 unlocker, and then installing the stock Bell rom from the HTC site on top of that. It seems to have worked.
Is there any other way to verify that the device is locked and in its original state? How do i enter bootloading state without actually installing another ROM?
SPL-2.01.0000
CPLD-3
Is what the bootloader displays. I assume this means the device is in its original state?
Click to expand...
Click to collapse
before i unlocked my device i wrote down my screen mine says spl-2.01.0000 and cpld-3 so you should be good to go
Thanks for the help everyone... flashed to .40 unlocker, then flashed to stock Alltel Rom, now ready to return my Vogue to Verizon for warranty replacement! Cheers!!!
For future reference:
http://forum.xda-developers.com/showthread.php?t=498964

Upgrading Rom of already upgraded Uni... Unlock again?

So, I got my hand on an Uni G4 (xda exec) that has 6.5 on it... I want to downgrade to the Tmo UK WM5 rom.
How do I know if I have to unlock the sim and cid (again)?
Under what circumstances would the sim and/or cid be re-locked (after it had been unlocked)?
And how do I know if I should do a DOC format? I see that there are a few ROMs that once installed require a DOC format if you want to change the ROM again.
And I did search the forums first, and could find the answers I need. I'm still checking up on the ROM that is currently installed on my Uni - 5.2.23016 (5.3.0 Luca16)
TIA!
Once it has flashed the 1st cooked ROM it has to be full unlocked, no need to do it again so you can downgrade without any problem os locking sim.
Have a look here to get one great wm5 ROM
http://forum.xda-developers.com/showthread.php?t=549207
Hope it helped,
Awsome!
Thanks!

Categories

Resources