Related
I saw a post on here about the progs in the windows/startup folder. Someone mentioned that removing the "connections" executable file had made their XDA more stable. It seems to be the exe that places the O2 icon on the task bar at the top of the screen.
I tried just that...moved the file out of startup to a temp backup folder and did a soft reset.
That was a couple of days ago and I haven't had to reset since Previously I was having to reset 3 or 4 times a day just through very light use!
Thanks for the suggestion Wilesd
Hmm not sure what .exe you are talking about in the windows\StartUp folder.
All I have there are:
Code:
aPerSaveStark.lnk
Camera_Detect.lnk
CheckAutoRun.lnk
ChgDfLnk.lnk
cPerSaveStar.lnk
IA_Caller_ID.lnk
nPerSaveStar.lnk
O2 Connect.lnk
poutlook.lnk
RegNotify.exe
Run_BTTrayCE_10.lnk
Spb GPRS Notify.lnk
STK.lnk
tPerSaveStar.lnk
As you can see.. The only .exe I have is the RegNotify.exe.
The closest that I get to O2 is the O2 Connect.lnk shortcut..
Is that the one you moved?
I don't have the "02 Connect" link in my startup. The file I moved was called "Connections". I can't see on my pda what the file extension is so I don't know if it was a .lnk or a .exe. The mention in the previous post I got the info from was that it was an executable though.
THIS is the post I saw it in.
Maybe it's a country specific thing ?
After all the crashing I was getting with the 1.31 ROM and O2 Active which I never used I decided to do the Corporate install that does not put on the O2 Active rubbish. My phone has not crashed since before I was getting at least 4-5 lockups a day!
Glad I could help, anyway I had to hard reset mine after i installed some dodgy camera upgrade Cab file so decided to give the "Corporate" option ago this time, just select Corporate during the Boot up and type 0506 when it asks for a corporate code.
No looking back now, basically you get a clean WM2003SE install without ANY O2 rubbish but all the GPRS configs etc.. intact. I have not had to do a single reset since.
Recommend this method to any fed up with the O2 active stuff screwing up your IIs. I can honestly say I can't fault the device now.
Thanks for the info guys.
I been holding back from doing the ROM update on my XDAIIs due to everyone saying they have to keep sot reseting their device.
I've just removed the connections.exe from startup folder on my existing setup - make sure i'm happy to carry on without the O2 icon at the top.
Will let you know how I get on.
Thanks again.
Great I shall try this tomorrow.
I've been getting regular crashes on my XDA 2s since I upgraded to the latest ROM.
D
Thanks, removed the O2 connections as suggested 2 days ago and have not needed to reset since.
Was having to reset 2 or 3 times a day since I'd upgraded.
difference between corporate and personal
Whats the difference between corporate and personal mode?
Corporate mode basically doesnt install O2 Active at all so you're left with the default windows screen (presumably so you could customise with your own corporate guff)
numanoids said:
Corporate mode basically doesnt install O2 Active at all so you're left with the default windows screen (presumably so you could customise with your own corporate guff)
Click to expand...
Click to collapse
Thanks and what do you mean "0506" as corporate code?
thanks ...yellow screen?
thanks guys the corp version seems to do the trick, look very stable now. who need o2 crap. however i can't fail that notice that the screen is slightly yellow from certain angles. it look whitish when you are right in front of it but from any other angle it looks yellowish...anyone else with similar screens? don't remember this to be the case with my previous trusted xda 2...it's a nice device though...
yanni
It seems to be a thing with the latest XDA2 "s" and "i" models as it didn't happen on the original XDA2. I did read that the original had Sony screens but the newer ones are made by someone else.
Regardless of this minor inconvenience, I do think the new screens are much brighter that the previous ones...Just my opinion of course :roll:
It seems to be a thing with the latest XDA2 "s" and "i" models as it didn't happen on the original XDA2. I did read that the original had Sony screens but the newer ones are made by someone else.
Regardless of this minor inconvenience, I do think the new screens are much brighter that the previous ones...Just my opinion of course :roll:
increase brightness levels
yes they are brighter indeed...also, the xda2s by default reduces the light of the screen to conserve power when used on a battery...if you fix this the yellowish feel goes almost away...why can't they get their sceens right, same probs with bloody apple products, don't they understand that their screen are the most important interface with their devices...
y
connections.exe in start up
I removed the connections as advised in my XDA IIs and yes it did improve the stability, but after several days I found that even though the PDA was working well the phone would not work properly, either the phone would lock or it would not dial out, or you would answer a call but the caller could not be heard. On two occasions my blue tooth connection was lost. though this only happened on the first day. This was solved by a soft reset. So I have come to the conclusion that yes connections is the trigger but also it dose serve some purpose. I am therefore going to use the corporate mode which seems to be a common solution on many forum topic subjects. I hope this feedback helps others.
I have only just got an XDA2s & noticed that I was resetting 5 or more times per day. I have now removed connections.exe from the startup folder and also removed all references to O2 Active from the Today program and the Start Menus
I'll post results in a few days
Re: connections.exe in start up
fvau72 said:
I removed the connections as advised in my XDA IIs and yes it did improve the stability, but after several days I found that even though the PDA was working well the phone would not work properly, either the phone would lock or it would not dial out, or you would answer a call but the caller could not be heard.
Click to expand...
Click to collapse
I tried corporate mode with removed connections.exe and installed beta of the new today screen.
I have noticed an issue with losing connections too, and your comment about not hearing caller reminds me that happened to me but I thought nothing of it at the time.
I have noticed a bit of a pattern to the not dialling out issue
Basically if the phone loses all connection for a while (not sure how long) then it seems to not get it back when you get to an area you can receive. A soft reset sorts this out.
But this is highly annoying for me, I live in London and go to work on the underground (subway to you yanks) and when I come out if I forget to reset my BA it will not receive calls or dial out.
XDA IIs Stability
What ROM version or versions are you all using?
I'm also having to reset my XDA a couple of times of day and would like to improve on the stability of the device. I've looked in my \Windows\startup and have various links (one is O2 Connect) and two executables (CommLoader.exe and RegNotify.exe).
Also, when I have had to do a hard re-set I have never gotten the option of 'Corporate or Personal'. Probably because of different ROM versions.
Also have any of you experienced problems with the Bluetooth no starting because of low memory on a regular basis?
Do any of you have an O2 XDA IIs from Asia?
Thanks
No resets in 3 days now I've removed connections.exe & stop using O2 Active UI Not using corporate mode though - I'm not brave enough yet to try upgrading my ROM
Strange things are happening all day today, I had majik installed since friday. Today my bleutooth jsut turns of and I cant use the head-set. Then programs like messaging froze, I was able to close it, but still IE froze and stuff like that, any one else expirencing things like this ?
yozh said:
Strange things are happening all day today, I had majik installed since friday. Today my bleutooth jsut turns of and I cant use the head-set. Then programs like messaging froze, I was able to close it, but still IE froze and stuff like that, any one else expirencing things like this ?
Click to expand...
Click to collapse
Ive been SRing all day! Mines been freezing on my telenav and sirius. Just started to do this today. Has been fine since Friday as well.
Yeah, same here. I have to do a SR every time I get in my car
Looks like I'll be installing something else on it...
I have been having IE problems connecting, Bluetooth not connecting, 3G freezing. Must be a bad day for Majik.
Well well I`m not alone on this, well vp3G here I come.
I am having this problem as well, what worse is that I am away from my PC for 32 days! on business in boston and all I have is a mac, even worse is that Igo keeps losing GPS whenever it shuts off Bluetooth, isn't there a registry hack that enables power-save on BT, I think I enabled that before and had a similar problem in WM5
spiritofseth said:
I am having this problem as well, what worse is that I am away from my PC for 32 days! on business in boston and all I have is a mac, even worse is that Igo keeps losing GPS whenever it shuts off Bluetooth, isn't there a registry hack that enables power-save on BT, I think I enabled that before and had a similar problem in WM5
Click to expand...
Click to collapse
Oh man I feel for you. I`m not sure about pwersetting for b, but it would make sense to me.
Had many problems with Majik yesterday so I tried 3 other roms. Not one would give me 3G sitting here in my office as majik had done. Flashed back to Majik and is working very well. I guess vevery week reflash
People, the root of nearly 70% of problems stems from 3rd party apps and NOT the ROM......
suggest you guys test it out with no apps installed and you will see the ROM is solid.
anything with 'spb' in the title should be left at arms length.
Anything like phonealarm etc... that claim to support WM6 really are only going on beta testers...remember the releases we are using are VERY new
Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.
yozh said:
Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.
Click to expand...
Click to collapse
Like i said, Hard Reset....then dry run it and youl probably see the difference.....3rd party software which is acting up can cause allsorts of weird problems.
yozh said:
Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.
Click to expand...
Click to collapse
I've got 5 8525's running this Majik and only one has "freezing" issues... and he had these same issues with his Wizard. 2 POP3 email accounts being polled every 30 minutes, Exchange 2003 push and 140 plus reminders MIGHT have something to do with it <sigh>
Battery life is incredible, speed is great when one adjusts the glyphcache.
As with you, my biggest complaint is with the BT dropping the call to the device but then I can bring it back up… seems to happen mostly on my initial outgoing call….
Again, respect to the chefs, this is a bad ass ROM.
Peace, out.
Hi Guys
I have been running LVSW 20070423 since it was released. Yesterday i decided to give Majik a go. All i can say it is terribly slow. Even clean ROM without applicvations. Could only stand it for 30min and then i reflashed LVSW back. The other thing is default coulors, i could hardly see my screen when outside. Dialer is crap, i like native WM6 dialer when you can type a few letters and then hide the dialpad. In Majik there are 4 lines only and if you have a lot of contacts it is a real pain to scroll through.
No good for me at all.
Will stick with LVSW ROM until the official release.
I have installed, Sirius, Voice Commander, Adobe, Live Search, WLM 1400, and esmertec. I tweaked the performance myself and set up mms and MEdia net and ISP/WAP settings myself. After I reinstalled Majik I have had no problems. I think that those problems came from WLM and IE because of the IPhone owners taking up my bandwidth
Note....Everybody that had problems was the same day they released the IPhone and we are all on AT&T
Check it out
http://www.theregister.co.uk/2007/07/03/stingy_att_iphone_network_snafu/
Second Flash
I think I had a bad flash the first time around.
I reflashed yesterday and the speed problems have dissapeared.
I was waiting +/- 20 seconds for /windows to open using file explorer.
That's all gone now and the ROM is pretty nippy and stable so far for my application.
But I do feel that all the extras trying to mimic the "Touch" ROM will have an effect on the speed and maybe stability.
That's why is still flash a different ROM every week or so.
To date Sleuth seems to have the combo nearly right.
LVSW cooked up fantastic ROM's, but he seems to be playing with his ELF now. - a bummer for us Hermes users.
Majick slowishness
I've found that installing the video dialler (3 cab files) dramatically slows down the Majick rom. I thought I was imagining things so I hard reset and repeated the excersise a couple of times with the same effect.
I leave the video dialler off now. I can't think of a time that I've ever used it although I do obsess about having a feature on my phone that I can't use even though I never use it.
Although Majick is an excellent ROM I did find the current LSVW was a bit quicker. The HSDPA problem in this ROM meant that it was a no-goer for me though.
I'm not complaining you understand, I'm very grateful for all the work people have done to get me WM6 on my phone!
only problem i have with majic so far is that when I add the new internet 3G connection, my username and password never seems to get saved no matter after how long. i have tried to both soft reset and power off, but still the 3G username/password never gets saved. anyone have any ideas on this?
Hello everyone. I'll make this quick and easy question. I have successfully updated to 3.35 radio, and tried several different custom roms in the past 2 weeks... At some point, i lost my internet connection, went back to stock rom successfully, and tried entire process over with and without the new radio (depending on which rom i tried according to instructions) and still no internet. I have spent literally over 4 hours on the phone with bell (Canada) to no avail. Only other option is to beat it with a hammer. I have noticed a couple people have had the same problem.. i have read these and PPC forums for hours and hours and hours, to try and fix this and get my Data connection back. tried almost every Rom i could find... to no avail. I'm just wondering if anybody had a sound fix for getting the Data connection back working again before i go to the store i got it from and freaking out and trying to get a new phone, or sending it off for a warranty claim which they say could take 6-8 weeks. Thanks for your time.
Chow.
This happened alot when
we were changing radiios
and roms on the Titans.
Most of the time the techs had to reset the
data security on their end. If they cant figure it
out , flash back to stock
radio and rom and go to
the store and swap it
out. Tell them you did
a hard reset and lost your data connection.
Good luck.
if you have another pda phone, get your carrier to activate it on your account, set it up ... get data working ... then get your carrier to switch it back to the one that had lost it's data connection, set it up ... try the data connection ... works every time on vzw ... I do the esn changes online ... give it a try ... couldn't hurt
Fuzzy
just spent another hour on the phone with tech Support, he tried resetting the Data Security, completely removing my device from our account and putting it back on, and he also had one of his own Touch's with him, he added it to my account, and it worked fine.. still nothing on mine. Grrrrrrrr!! this is megga frustrating... its been a week 1/2 and now 5+ hour on the phone and an hour at the repair shop yesterday. he re-esclated the problem and now i have to wait again for somebody to call me. I really don't want to have it sent to HTC becuse it will take 6-8 weeks, and i truely think its something in my phone itself as a result of "playing" with it, and i'm just hoping that somebody can come up with something that I havent already tried to get it working again. Thanks for you time once again, and keeping my fingers crossed.
Go to the epst settings.
Find username and password in there ( i guess data parameters??). It will be wrong. [email protected]
change it to the right ones.
that is EXACTLY where i went a week or so ago. i found this information in another post, and the UN is there, but no password, and Bell insists there is no need for username and password... but i disagree... i also think this is the problem.. i really do... any ideas how the heck i can get what my password should be?
in teh Data parameters, the only thing that is in there is Packet Dial String ----#777 In the security section is the UN and Pass. field. Is this where you were talking about maybe?? or is there something missing in the Data Parameters section?? UN showing is [email protected]
GRRRRRR!! This really sucks.!! BIGTIME!. Ive been fooling with this thing since 6Am... lol One thing that i did forget to mention, is... when i say no data, or internet.. this is what happens..
When i try any app. that wants internet, it will bring up the connection screen, "Connecting to Data, network... #777" type thing..... sometimes it will just sit there forever and ever... if i hit cancel... then in order for me to even make a phone call, i have to soft reset.... sometimes... (about 50% of teh time) it will come up with an error screen after about 5 seconds of trying to connect, and it says "Unable to connect for an unknown reason, if you need to view or change settings, tap settings, if teh problem continues reset your device according to manufactures instructions, and try again."
I just downloaded and tried the new Sprint Leaked rom, with the 3.37 radio, and still same thing. i still think it has something to do with the Username and PW in the ##778 settings... because i do remember seing a bunch of (hex) information in the PW field in the past when i was snooping around and now its gone.... I even tried converting the two numbers that bell gave me to Hex and putting them in there... and nothing... the one that i seen in there before was a big ass long one... Anyhow... i'm almost giving up i'm soon going to get extremely angry and beat it or throw it off the 20 floow balcony just for kicks... <g> Thanks for reading.Any help is appreciated.
Grashoper said:
GRRRRRR!! This really sucks.!! BIGTIME!. Ive been fooling with this thing since 6Am... lol One thing that i did forget to mention, is... when i say no data, or internet.. this is what happens..
When i try any app. that wants internet, it will bring up the connection screen, "Connecting to Data, network... #777" type thing..... sometimes it will just sit there forever and ever... if i hit cancel... then in order for me to even make a phone call, i have to soft reset.... sometimes... (about 50% of teh time) it will come up with an error screen after about 5 seconds of trying to connect, and it says "Unable to connect for an unknown reason, if you need to view or change settings, tap settings, if teh problem continues reset your device according to manufactures instructions, and try again."
I just downloaded and tried the new Sprint Leaked rom, with the 3.37 radio, and still same thing. i still think it has something to do with the Username and PW in the ##778 settings... because i do remember seing a bunch of (hex) information in the PW field in the past when i was snooping around and now its gone.... I even tried converting the two numbers that bell gave me to Hex and putting them in there... and nothing... the one that i seen in there before was a big ass long one... Anyhow... i'm almost giving up i'm soon going to get extremely angry and beat it or throw it off the 20 floow balcony just for kicks... <g> Thanks for reading.Any help is appreciated.
Click to expand...
Click to collapse
i am not with bell, so dont know what do they use. Maybe somebody else can confirm if they are supposed to be empty or not.
may be try empty username and password.
Then try the username you have right now and esn as your password.
i know on telus both will work.
YES YES YES YES!!!! ohhhh yeah babby!!..
i FINALLY got it working!! Yeeee hawww... if only you knew how happy this makes me... deer gawd...
I'll post what i did in the AM.. i can hardly keep my eyes open...
Thanks for all your input!
wanna share? i haven't had internet for the last three weeks and i am going nuts, tried with bell tech support for roughly 3 hours on the phone two seperate times and nothing. Please share
before i tie the phone to the back of my bike and ride around town to set an example heheh
Nas
Hay.... I wan't able to access the website here for a couple days... EVERYTHING you will need to get your internet back (Hopefully) is over on PPCgeeks... i recomend reading the whole thread, although the final answer to your question is near the end of the thread. Check it out...
http://forum.ppcgeeks.com/showthread.php?t=26691
Ok so i just got my i780 had it for about a month my problems are upsetting me.
1-cant find gps software anywhere for it
2-mine doesn't have radio how do i fix this
3-i was hoping there is a program so i can see my sms like on a blackberry
BUT the biggest issues is
My phone slows down and freeze all the time when the batt gets less then half way or sometimes when ever is feels like it im thinking its a firmware issue but no idea this forces me to reset the phone then it will work
CAN ANYONE HELP PLEASE??
1 - try google maps mobile, it is free
2 - radio? you mean an FM radio? the i780 has none. you can use webradio with an app like resco radio
3 - ?? what do you mean? it does show your sms? you mean threaded? try this: palm threaded sms, but it can break MMS support
mine does slow down too. even with then newest custom roms. could quite possible be a power management issue in that it slows down to preserve battery. not sure on this.
Hi everybody, just got mine two weeks ago. The device also slows down on me after just a string of SMSes is this really normal? I find the lag very annoying and then I have to reset it. Already did a hard reset once but nothing happened. I am a noob so no applications installed yet...though I'm already looking at doing EFN's rom with hopes that the process will improve performance.
Hey guys, i haven't ever really posted on here other than when i first got my TP2 months ago. Since then i have had 9 replacements for various things, all of which have been hardware related. Things like constant freeze-ups, always telling me i have un-read messages when i don't...anywhere. and some others but those two are the main ones. So i am asking you guys what do i need to do to stop myself from body slamming this phone across my living room? Every single phone i get has the un-read message problem. And after about a month of use they all constantly freeze. I can't stand having to do literally 8+ battery pulls a day because the phone doesn't want to work anymore.
Any ideas? What ROM are you guys all running and what seems to be the most stable? I have never upgraded a ROM before so i have no idea what i am doing there as i have always been a MAC user. However, i do have access to a PC. Any help would be appreciated.
EDIT: Another thing it does is when i get a call or text the phone will vibrate non stop until i turn it off and restart it. This also happens 2-3 time daily.
irishguy0224 said:
Hey guys, i haven't ever really posted on here other than when i first got my TP2 months ago. Since then i have had 9 replacements for various things, all of which have been hardware related. Things like constant freeze-ups, always telling me i have un-read messages when i don't...anywhere. and some others but those two are the main ones. So i am asking you guys what do i need to do to stop myself from body slamming this phone across my living room? Every single phone i get has the un-read message problem. And after about a month of use they all constantly freeze. I can't stand having to do literally 8+ battery pulls a day because the phone doesn't want to work anymore.
Any ideas? What ROM are you guys all running and what seems to be the most stable? I have never upgraded a ROM before so i have no idea what i am doing there as i have always been a MAC user. However, i do have access to a PC. Any help would be appreciated.
EDIT: Another thing it does is when i get a call or text the phone will vibrate non stop until i turn it off and restart it. This also happens 2-3 time daily.
Click to expand...
Click to collapse
What version of TP2 -- e.g, T-Mo USA, Verizon, World-Wide/Euro -- do you have?
irishguy0224 said:
Hey guys, i haven't ever really posted on here other than when i first got my TP2 months ago. Since then i have had 9 replacements for various things, all of which have been hardware related. Things like constant freeze-ups, always telling me i have un-read messages when i don't...anywhere. and some others but those two are the main ones. So i am asking you guys what do i need to do to stop myself from body slamming this phone across my living room? Every single phone i get has the un-read message problem. And after about a month of use they all constantly freeze. I can't stand having to do literally 8+ battery pulls a day because the phone doesn't want to work anymore.
Any ideas? What ROM are you guys all running and what seems to be the most stable? I have never upgraded a ROM before so i have no idea what i am doing there as i have always been a MAC user. However, i do have access to a PC. Any help would be appreciated.
EDIT: Another thing it does is when i get a call or text the phone will vibrate non stop until i turn it off and restart it. This also happens 2-3 time daily.
Click to expand...
Click to collapse
The things that you mention are not hardware problems but software. So they can be solved by flashing a new rom. I suggest you read the how to flash for noobs thread.
Try a valkyre rom and read the last pages of that thread to see if there are issues etc
A new ROM may very well help sort out your problems, but the excessive problems you have been having make one wonder if there is not some other issue. So before you go to flashing a new rom, it might be a good idea to do some troubleshooting first to try and narrow down the problem.
First, a few questions:
1)What UI are you using? (i.e., Touchflow 3d, Sense, SPB Mobile Shell, Titanium, Classic today?)
2) What programs are you installing?
3) Are you doing any registry edits? Or using custom programs that do registry edits for you? (Things like configuration tools that you installed)
While answering the questions may shed some light on why you are having problems, here is the first thing I would try that could help narrow down the issue:
1) Dissable any custom UIs (start -> settings -> today -> items tab -> select Windows default -> hit OK) then soft reset your phone. Use it for a day and see if any of the problems go away, then report back.
I've got some other ideas, but will hold out on those until looking at your responses to the others above... good luck.
Hey guys and thanks for the replies. I am on a Verizon TP2. Running the stock HTC Sense ROM that came on my last replacement. I do not have anything custom running on the phone and only have 2 apps on the phone itself (facebook and personal assistant). I have given up putting them on there since i have been replacing the phone so often. Problems are still happening.
Thoughts?
Have you tried yet dissabling sense and running for a day to see if there are any improvements? If that doesn't work, I would move on to a hard reset, then disable Sense, and see if it is better. If it was, I would re-enable sense and dissable the email and sms tabs and see....
Meanwhile, I would also be reading the newbie guide to flashing new roms... as it is really odd to be seeing these sorts of problems with nothing installed on the phone.
I am correct that you haven't installed the facebook and personal assistant programs since your last hard reset? I only ask because the product description for the personal assistant looks like it is somewhat invasive into your phone (i.e., it can track minute use and such) and could possibly be the culprit for some or even most of your issues...
irishguy0224 said:
Hey guys and thanks for the replies. I am on a Verizon TP2. Running the stock HTC Sense ROM that came on my last replacement. I do not have anything custom running on the phone and only have 2 apps on the phone itself (facebook and personal assistant). I have given up putting them on there since i have been replacing the phone so often. Problems are still happening.
Thoughts?
Click to expand...
Click to collapse
ur previous statement says your a mac guy. what a re you doing with a windows phone? thats just a recipe for disaster.....
try flashing to an NRG rom. I personally have been using cookie energy for months and never had any problems. this may be a lil too complicated for a "mac" user tho.