Related
I own a BA sold as I-mate PDA2K.
I always had people telling me to speak up when on the phone.
So I dismantled the damn thing and found out that the case didn't have a hole in front of the micrphone.
I tested the mic quality with the phone dismantled (I held the battery with my hand) - IT WORKED PERFECTLY!!
So, I put a 1-1,5 mm hole where it should've been.
It's working flawless now.
I must mention that I must've been tipped by someone on the forums, 'cause I kind of remember reading something somewhere around...
Anyway, thanks for the tip, whoever wrote that!
Hope this info is of any help.
Have a nice drilling day!
mind telling us how u got it opened up?
Theres two side screws and 2 screws on back of lcd thats all I can really find.
there are then 3 plus a voild sticker screws under the battery.
Gomo
Sorry for the delay.
I haven't check the forum lately...
Yes, I forgot to mention that, indeed, the procedure voids warranty.
But, on the other hand, you may ask your provider to do the procedure for you. If they say that it may not work, just tell them to take it apart and make a test call with the battery kept in place with your hand (just as I did!).
If it doesn't work, they put it back and seal it again. If it does, they cand drill it and seal it back and that's it, right?
Of course, you can always do what I did - give up the warranty...
Best regards,
grasomega
so, for the second time in about 5 months, my dash lcd screen cracked. luckily (this time) i don't have to pay anything. it's apparently a known issue. is there anyway to prevent this from happening? this time the phone was in my jeans pocket with an iPod nano & i wasn't doing anything extreme besides walking. i tend to take good care of electronics so this is real annoying. also, i have a case i use
mjpuczko said:
so, for the second time in about 5 months, my dash lcd screen cracked. luckily (this time) i don't have to pay anything. it's apparently a known issue. is there anyway to prevent this from happening? this time the phone was in my jeans pocket with an iPod nano & i wasn't doing anything extreme besides walking. i tend to take good care of electronics so this is real annoying. also, i have a case i use
Click to expand...
Click to collapse
Use a holster or a protective case to carry your Dash. They are available on numerous websites. Also, you can buy protective screen covers. They have them in the accessories section on the T-Mobile website and many others as well.
sorry, i didn't mean the actual screen cracked. i meant it looks like ink exploded in the back ground. the actual screen is fine. it's behind it that's the problem.
Okay... so what's your question... or issue then ?
the screen appears to be cracked behind the actual 'glass'. so it looks like ink bleeding across the screen ( i saw someone else posted about this). i can't figure out exactly how/why this happens & t-mobile was of no help. i was just wondering if other people have experienced this. i found some related messages on another forum but no one had a solution to stop this, other than use a case. which i do.
I has a similar problem once.. Tipsy fiancy decided to grab my phone, knocked it into the leg of a table.. Cracked the crap outa the screen.. I ended up calling tmobile and saying "my screen doesn't work any more.." They kindly replaced my phone with no hastles..
if something like that happened, i could understand. the damn thing was in my pocket for about 1 minute!
Sorry dude - its broken.
The LCD has a couple of layers. One of back layers are broken.
This is one solution:
http://cgi.ebay.com/T-Mobile-DASH-E...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Search ebay for better offer.
This is some video tutorial:
http://youtube.com/watch?v=FI6bZ3L-hE0
hmm..apparently i didn't explain myself enough. t-mobile i sending me a new phone for free. i just want to prevent this from happening in the future. i guess i'll just step up the case i already have. i'm looking at this one:
http://www.boxwave.com/products/armorcase/armor-case-t-mobile-dash_2355.htm
I think this case is better:
http://cgi.ebay.com/Fr-T-Mobile-DAS...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Coz its simple, good looking and lite.
that's pretty much what i have now & my phone's broke twice now
i think i need something that protects the screen too. or HTC should fix this problem that numerous others have complained about.
littleclown said:
I think this case is better:
http://cgi.ebay.com/Fr-T-Mobile-DAS...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Coz its simple, good looking and lite.
Click to expand...
Click to collapse
I have that exact case - its pretty good! I've been using it for 8 months now and its been fine. I don't think it really helps the screen all that much, but I have a screen protector on too. The only problem is that the phone is not so grippy with the case on. Overall I'm happy and it didnt cost much. Actually I use another case
Actually I have this too:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330152841341&ru=http%3A%2F%2Fsearch.ebay.com%3A80%2Fsearch%2Fsearch.dll%3Ffrom%3DR40%26_trksid%3Dm37%26satitle%3D%2B330152841341%26category0%3D%26fvi%3D1
Its for the Cavalier but fits (with the other case on too) perfectly. This one I love!
I put my phone ot shirt pocket - no movement, no problem.
during the winter, i always put my phone in my jacket pocket, never my jeans. and the two times i've put it in my jeans this has happened
therefore
i will not putting the phone in my jeans!
guess i'll just have to be even more careful than i already am. i ordered a nice case with a screen protector & shock resistant.
thanks for the help!
Yeah, that's gonna snap the first time he sits down, also! lol
Stick with a nice leather case. I'd recommend the nice, Palm branded, horizontal case they make for their Treo's.
Does it come with a screen protector????????? If it doesn't then I should of ordered one in advance!
Let me know.
Came with only one screen protector behind the manual and the CD
Good! Do you think it's reusable? I don't want to put it on and then find out I have a faulty device after a few days.
The Tmo Rep put mine on for me. He must be new, though. He had no clue the TP2 came out today, i had to tell him. alskdjf. and when he tried to put the screen protector on, he looked like if he was trying to do NeuroSurgery or something. so now i have a big air bubble running down the entire left side of the device. and on top of that, when he tried to take the battery cover off, he tried to PRY it off the device. WTF?! it really is not that hard AT ALL to take the cover off. Right? i was a little stunned when he tried to do that. But everythings fine.
Yeah usually when I get a device from the store they try to do everything for you. I would have to say no it's ok I got it. Then they would just put it in the bag and I would leave.
i got my tp2 today, and it came with factory plastic screen protector, took me half an hour to realize why i couldnt hear volume on calls.. realized the one that comes with the phone has the top speaker completely SEALED/blocked off... then theres an extra screen protector that came with the phone in the box, that one has preholes for buttons + speaker.. it took a quick 2minutes of finesse to put it down without any air bubbles, i found this quite easy after realizing they had good stick, just do it slowly
where can i get extra protectors? didnt put mine on very straight.
where are you guy's getting the TMo TP2? Doesn't show on their website yet
Showed up for me on Tmo sites last night: I went to a Tmo store to get one cause I didn't want to wait for shipping. Walmart.com also carries the full line of TMo phones.
As for screen protectors, I like Invisi-shield from Zagg. They protect very well and add a non-slip surface. I just hate the idea of dropping my $800 (HD) phone.
You can call T-Mobile to order your TP2. For the screen protector, I like "bestskinsever". I use them for every device I had.
I ordered mine from Brando, Honkong. I use have their SP on my HD. It was the BEST ones I have seen thus far. But I am not sure if the one I ordered will fit the TP2, as on the Engadget review, I saw fromt he Pics that the Europe TP2 size is a bit differnt to the Tmo USA ones. I should be getting it in a day or 2. I will update once I have it.
it comes whit a screen protector , just look for it in the box where the manual is. (TMO TP2)
Day 31.....the bottom will peel!
Buy a screen protector....the complimentary one is better than nothing at all.
Patiently waiting for "Write Shields" to come out with one. Excellent quality, been using since Kaiser.
I ordered a Zagg for mine - the one in the box is serviceable, but IMHO not what you want. I've been an "Invisible Shield" fan for a long time.
josh_prayyforplagues said:
The Tmo Rep put mine on for me. He must be new, though. He had no clue the TP2 came out today, i had to tell him. alskdjf. and when he tried to put the screen protector on, he looked like if he was trying to do NeuroSurgery or something. so now i have a big air bubble running down the entire left side of the device. and on top of that, when he tried to take the battery cover off, he tried to PRY it off the device. WTF?! it really is not that hard AT ALL to take the cover off. Right? i was a little stunned when he tried to do that. But everythings fine.
Click to expand...
Click to collapse
Try your stylus, it's probably jammed in there now. You can't remove the case without removing the stylus first! Otherwise something gets bent inside. I bet the T-Mo Rep didn't know that, and now you gotta return the phone for a new one.
But, LOL, that's why my phone volume was so quiet!! I still have the factory screen protector on it, which covers the speaker, as someone said! LOL.
dwny said:
Day 31.....the bottom will peel!
Buy a screen protector....the complimentary one is better than nothing at all.
Patiently waiting for "Write Shields" to come out with one. Excellent quality, been using since Kaiser.
Click to expand...
Click to collapse
Agree! The one it comes with is a piece of crap!
I got 2 screen protectors with mine from tmo. First is on there and still going strong way into 3 months. Works a treat. Thats not to say others are better but ive not had and issues so far...touch wood
ace10134 said:
Try your stylus, it's probably jammed in there now. You can't remove the case without removing the stylus first! Otherwise something gets bent inside. I bet the T-Mo Rep didn't know that, and now you gotta return the phone for a new one.
But, LOL, that's why my phone volume was so quiet!! I still have the factory screen protector on it, which covers the speaker, as someone said! LOL.
Click to expand...
Click to collapse
I disagree (At least w/the USA version)...read the following thread again (before your post): http://forum.xda-developers.com/showthread.php?t=547538
The cover tabs are not even in the same plane as the stylus...Although I will agree that the T-Mo Rep may have broken a tab while cranking the cover off, causing it to fall in the adjacent stylus slot...
glhs509 said:
I disagree (At least w/the USA version)...read the following thread again (before your post): http://forum.xda-developers.com/showthread.php?t=547538
The cover tabs are not even in the same plane as the stylus...Although I will agree that the T-Mo Rep may have broken a tab while cranking the cover off, causing it to fall in the adjacent stylus slot...
Click to expand...
Click to collapse
Yea, I read that. That's what hinted me off that the stylus was damaged. And obviously it did get damaged due to the back case, because it's barely removable.
ace10134 said:
Yea, I read that. That's what hinted me off that the stylus was damaged. And obviously it did get damaged due to the back case, because it's barely removable.
Click to expand...
Click to collapse
Just a quick check, but does your back cover still have two tabs on each side, and one towards the bottom (middle)? Not sure if it's you or josh_prayyforplagues that was having the stylus problem tho...
I have a screen problem.
All over the screen it seems that there is a very thin strip of rubber or something.
On the right hand side, just below half way it seems that this has been pushed towards the greyish thing on the outside.
And it has been pushed up a little.
So i have put my phone sideways and there is a little dink which is where it has been pushed up.
Now you can see the dust is getting in the rubber thing.
And if you just roll your finger over the edge of the screen you can feel it.
Is there anything I can do about this?
you could perhaps describe it a little better, maybe take some photos..
I can not take a photo at the moment.
http://www.navigadget.com/wp-content/postimages/2010/02/htc-desire.jpg
The image shows three phones, but the one on the right, of it showing sideways.
Imagine a bump on the black thing, where the screen is.
So instead of being flat and smooth it is not!
sounds like a manufacturing issue, little hard to suggest things you could try. Might have to be a returns mission..
Sounds like you have dropped it or more likely it was damaged in transit from China.
Get it replaced.
I know that I have not dropped it.
I have been so careful that I put it back in the box when I am charging it lol.
It is always on a clean surface.
When I get a new device I am always careful. lol
It is like a baby! I suspect a lot of you are careful too!
I have only taken it out my house once or twice and that was when I went to work!
To replace it who would I have to ring.
Sorry i am a complete noob ... I am only 18!
Just to let you guys know,
I just rang up T-Mobile and got this very helpful person who will replace my phone!
She was very helpful and it was no nonsense!
She mainly did it because of my battery life and partly due to the screen!
Hi,
I can't remove the battery cover, which I will need to be able to do as I want to install a custom rom, but if it gets stuck in a boot loop I'll be completely stuck.
And I know the design is poor (i.e everyone has issues), but only one person has ever been able to do it (something like the 15th person, in the 6th shop I took it to, cause you need to take the cover off to unwrap the battery on first boot).
Any techniques or anything? It literally seems stuck. The guy that did it took it out the back and came back with it off.
Tamen said:
Hi,
I can't remove the battery cover, which I will need to be able to do as I want to install a custom rom, but if it gets stuck in a boot loop I'll be completely stuck.
And I know the design is poor (i.e everyone has issues), but only one person has ever been able to do it (something like the 15th person, in the 6th shop I took it to, cause you need to take the cover off to unwrap the battery on first boot).
Any techniques or anything? It literally seems stuck. The guy that did it took it out the back and came back with it off.
Click to expand...
Click to collapse
+1
I also would like to know if there is special way to do it.
I once drop my phone and the battery cover come out a little bit from its position. I try to put it back into its position. BUT couldn't do so. Than I try pull out the cover. Than BAMMMM!!! its broke!!!
Buy new cover, but costly..
Buying a new cover is only any use if you can get the original off. And although I don't know the technique, even people that did couldn't get it off - I was shown 2 other DHDs that could be done with a minimal amount of fiddling (i.e. mine is way worse than it should be). I had about 10 people say "oh yeah mate it's easy, you just do thi.. wait... wow, that's like glued on or something".
The battery cover is a good design. Had to take out the battery number of times and it always goes off and on as intended to, perfect.
I had another mate try to do it and he just couldn't figure it out. Wtf has this world come to??
If you look there is a little space where you put your nail and then pull it out with a bit of force and putting it in is even easier!
Honestly, so many threads/posts about this...
Sent from my Desire HD using Tapatalk
ErOR22 said:
The battery cover is a good design. Had to take out the battery number of times and it always goes off and on as intended to, perfect.
I had another mate try to do it and he just couldn't figure it out. Wtf has this world come to??
If you look there is a little space where you put your nail and then pull it out with a bit of force and putting it in is even easier!
Honestly, so many threads/posts about this...
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
I'm not thick, you would have to be stupid to not realise there's a place for your nail - the problem is that my cover wouldn't budge (clearly you didn't read the OP - I took it to 5 different PHONE SHOPS - and only one guy could do it. I've opened other DHDs, just not mine. Until today...
Got a friend to try - he spent about 5 minutes but couldn't, but he must have budged it as I could get my nail into the corner - (to the left of the bit you're supposed to do) and hook it up from there - sorted
eeeeehhh RELAXXX lol
one moment...... are you talking about you can´t open the battery cover of your DHD?
REALLY YOU CAN´T?
I'd be darned if people find the DHD battery hatch to open easily... I even got the under side of my nails(the index finger) bleed trying to pry it open the first time I tried to charge the phone.
SERGI.3210 said:
eeeeehhh RELAXXX lol
one moment...... are you talking about you can´t open the battery cover of your DHD?
REALLY YOU CAN´T?
Click to expand...
Click to collapse
Couldn't, now can I felt really embarrassed going into a shop saying "I can't take the cover off" But then they were like... neither can we haha. It's been loosened now and can be done with a bit of technique.
It can be that it sounds absurdity but here I leave the guide of DESIRE HD, there it is written like to remove the cover.
In a Spanish forum i was read that there are people who helps herself with a credit card or a small screwdriver...
i think its solved
http://dl4.htc.com/web_materials/Manual/HTC_Desire_HD/HTC_Desire_HD_WWE_UM.pdf
plskillme said:
I'd be darned if people find the DHD battery hatch to open easily... I even got the under side of my nails(the index finger) bleed trying to pry it open the first time I tried to charge the phone.
Click to expand...
Click to collapse
I can remove the battery cover from my DHD with one hand - although I end up flicking the cover several feet.
Don't get me wrong, when I first got mine it was so tight I nearly snapped it. It's by no means loose now but it has got a little easier.
I don't like my fingernails to reach some ugly lengths(like girly nail lengths) I usually keep my fingernails short b/c I have some sort of OCD... ):
plskillme said:
I don't like my fingernails to reach some ugly lengths(like girly nail lengths) I usually keep my fingernails short b/c I have some sort of OCD... ):
Click to expand...
Click to collapse
Um, ok, thanks for sharing that. Useful to know.