HELP me with my brick htc touch opal(viva) - Upgrading, Modifying and Unlocking

I recently flashed my opal to wm 6.5 and it worked perfectly fine. Yet today when I tried to install a software which would help display chinese character, after reboot, it got stuck in the smart mobility screen. I have tried hard reset and it didnt work. HELP ME!!!

Double Post
Closed.
Dave

Related

Is my hermes dead now?

Hi,
i've been searching this forum all day now, and i haven't found a post for my problem. I've been using schap's rom for a few weeks now and yesterday, when i got in my car and put my hermes (t-mobile vario II) into the charger it resetted and it didn't boot anymore. the dark screen comes up (the one with the red numbers) and it goes into the next screen but thats it. I even left it that way for an hour but still no working phone...
Can anybody please help me out? i'd hate it to go back to my old nokia...
HELP!
thanks in advance
Have you tried a hard reset? Also, my phone got stuck there once, and hitting the little reset button on the bottom of the phone got it to work.
I did try a hard reset several times.. still the same problem...
please refer to the unbricking thread here: http://forum.xda-developers.com/showthread.php?t=286755
You will find all the info you need in that thread.
Fixed it!
Hi!
Well i did fix it all right! (happy happy joy joy)
I don't know what went wrong, but i made myself a nice new rom with pandorras kitchen (hermes style) which i installed via the SD card using this info: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Thanks for that!
you could also fix that problem by installing Hardspl7 , it happened with me twice i don't remember with what rom , but it happened and fixed using HardSPL7 .
WBR

Dead after upgrade

My S620 after upgrade with htc rom WM6_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship, only get a balnk screen, and is not detected in windows XP. Already tried hard reset but still not working.
Guys please help me!
sorry to say but you prettty much have a dead piece of weighless paper...

T-mobile MDAIII [NL] bricked

Hi there,
I was running vanilla 3.01 fine!
But this evening my phone was turned off and it did nothing... no light not on the charger and my computer doesn't connect.
I've read a few threads which explained how i could fix this.
So after a hard reset my device only shows the 1st screen with the following information:
IPL 3.04.0001
SPL 1.11.0000
Then nothing.. it sticks to this screen.
Would any of you genuisses help me find a solution?
I would really appreciate! thanx! :-(
found the solution!!!! pffeww
Enter bootloader
Flash original ROM
cid-unlock
update ROM to Vanilla's 3.01
HAPPY!!!!
ps.. THANKS to Aje_fr!!!! (who already posted the solution!)
just in case you don't know how to enter bootloader;
hold down the note and power button and soft reset.
Veel plezier!
now really dead...
I was installing all my software but when I soft reset it was dead....AGAIN!!..
I entered bootloader again and repeated my previous steps.. but now my device goes to sleep instantly.
it doesn't do anything...
Send it to T-mobile I guess... (Glad I was able to flash the WM6 T-mobile [NL] version)
Anyone got an idea whit it could be?
mtomassen said:
I was installing all my software but when I soft reset it was dead....AGAIN!!..
I entered bootloader again and repeated my previous steps.. but now my device goes to sleep instantly.
it doesn't do anything...
Send it to T-mobile I guess... (Glad I was able to flash the WM6 T-mobile [NL] version)
Anyone got an idea whit it could be?
Click to expand...
Click to collapse
It could just be the backlight switching off. Ive read about this in a few threads. Ive experienced it myself with Meschles 3.01 ROM.
nm8 said:
It could just be the backlight switching off. Ive read about this in a few threads. Ive experienced it myself with Meschles 3.01 ROM.
Click to expand...
Click to collapse
Nope, even with te original T-mobile rom it dies after a few minutes...
Thanks for the tip though!

Imate Kjam Will not boot

Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me

Touch Diamond doesn't boot

Hi everyone,
I've been trying to cook a WM6.5 in Portuguese (I used some files rom WM6.1PTG and I translated some others) with Visual Diamond Kitchen and in the cooking part all went well, I have the .ndh file generated and without errors.
Then I flash the Diamond and after the flashing is concluded the diamond makes itself a reboot and stops after the first boot screen with TouchDiamond and the red information about the versions.
I tried to do a hard restart, soft, remove and out again the batery without success.
Does anybody have the same problem?
I'll appreciate help.
Best Regards,
Armaia
Do you removed "FWUPDATE"?
pspeter said:
Do you removed "FWUPDATE"?
Click to expand...
Click to collapse
that FWUPDATE troubled me a lot!!!!
No, I didn't. Do you think that could be the problem? I,m going to try.
Thanks
Try to change the rom . Pull out the stylus , Press the reset button and hold the VOLUME DOWN and the right down button . After connect to pc
Hi,
I removed the FWDATE but the problem occurs in the same way.
AM
Armaia said:
Hi,
I removed the FWDATE but the problem occurs in the same way.
AM
Click to expand...
Click to collapse
Try to restore first your original shipped rom and then reflash your own rom.
Hi All,
I have the same problem, I flashed MightygroovyROM, after first boot, it stops, there is only "Touch Diamond" on the screen. I tried hard reset but doesnt work. Since activesync connection couldnt establish, I couldnt do anything.
Anyone know another technique to connect without activesync ? or is there any other way to go back old rom any flaeshing a new rom ?
Best regards
Kag
Armaia said:
Hi everyone,
I've been trying to cook a WM6.5 in Portuguese (I used some files rom WM6.1PTG and I translated some others) with Visual Diamond Kitchen and in the cooking part all went well, I have the .ndh file generated and without errors.
Then I flash the Diamond and after the flashing is concluded the diamond makes itself a reboot and stops after the first boot screen with TouchDiamond and the red information about the versions.
I tried to do a hard restart, soft, remove and out again the batery without success.
Does anybody have the same problem?
I'll appreciate help.
Best Regards,
Armaia
Click to expand...
Click to collapse

Categories

Resources