Bottom button lights always on. - Touch Pro2, Tilt 2 Windows Mobile General

Hi folks, I've had my phone for two weeks, can't really seem to find any documentation on this, but the hang up/power button always seems to be lit up red. I'm not sure if the light is bleeding through, or if the rest simply are not as bright, but the back, start menu, and dial buttons seem to be lit all the time too, regardless of the situation unless off.
I'm assuming everyone else sees this too?
This was something I liked about my Touch Pro, very minnimal. I sort of miss the gentle swoosh of the d-pad on a reminder event, or when charging.
Any thoughts?

what about pressing enter?

Actually none of my buttons at the bottom light up when the device is on unless I hit one of the 4 buttons. Then they only stay lit for about 5 seconds before all going off again.

Ohh, I thought that was odd. Staying on for 5 seconds would make a lot more sense..
Enter? You mean on the keyboard?
Anyone else on a Telus Touch Pro2, can you confirm whether the four bottom buttons stay lit all the time?
Oh, now it turns out it looks like the three left buttons stay dim, but still on, unless one is pressed, but then they dim after 5 seconds or so like mentioned, but the hangup button is always bright red.

I also have the telus touch pro 2 and I have the same problem, I think its just the power/hang up button that stays on but I know what you mean about the light bleeding through to the other bottem buttons as well, I have been searching for a solution to this problem since I got it and have had no luck.

I returned the phone for another NEW one since it was DOA. Both HTC and Telus agreed. That is not a normal operation for the phone to do that, but it's odd that two are doing it.
It gave me a noticably better battery life too, so get on top of that replacement right away. The replacement phone works perfectly.

Ya my battery life hasn't been great and I thought that could be a large factor in it, so I will try to get it replaced then if thats not a normal function of the phone.

matt608 said:
Ya my battery life hasn't been great and I thought that could be a large factor in it, so I will try to get it replaced then if thats not a normal function of the phone.
Click to expand...
Click to collapse
Exactly. I thought the same thing. When actually working properly, it has a long battery life for a phone like that. Significantly longer than my touch pro, which is even more than the p4000

Did you set HKLM/system/currentcontrolset/control/power/batpoweroff to 0, and not 180?
I think that might be what caused it

Icepick66 said:
Did you set HKLM/system/currentcontrolset/control/power/batpoweroff to 0, and not 180?
I think that might be what caused it
Click to expand...
Click to collapse
Its currently set to 0, thats what it should be?

The one I have now that works is set to 0. Not sure about the one that I had that was having the issue.

Related

check if phone is in standby without switching it on by accident

ok, has anyone else noticed this problem,
sometimes i switch my phone off to save battery and it will switch itself on in my pocket so i need to check every now and then to see if it is really off, however, the only way to switch the screen on is with the power button so if my phone was really off then i have to let it start up and switch it off all over again.
i'm going to have a look for a way to remap the buttons without root as i cant get unrevoked to work and i cant be bothered to go about it the long way
hmm im not sure if this is the same issue, but sometimes the keys on my desire are on with the screen being turned off, im not sure if it happens on its own or what, not a big deal really
kinkade said:
ok, has anyone else noticed this problem,
sometimes i switch my phone off to save battery and it will switch itself on in my pocket so i need to check every now and then to see if it is really off, however, the only way to switch the screen on is with the power button so if my phone was really off then i have to let it start up and switch it off all over again.
i'm going to have a look for a way to remap the buttons without root as i cant get unrevoked to work and i cant be bothered to go about it the long way
Click to expand...
Click to collapse
I noticed this, it is very annoying!
What ROM are you using? I use DeFrost 2.3 and you can bring the phone out of standby by pushing the trackball button. A second push unlocks the phone.
I dont understand this. If the phone is on, a single short press of the power button will light the screen. If it's off, it needs a long press to turn it back on - therefore it's pretty easy to tell the difference
theboylogan said:
I dont understand this. If the phone is on, a single short press of the power button will light the screen. If it's off, it needs a long press to turn it back on - therefore it's pretty easy to tell the difference
Click to expand...
Click to collapse
nope. just tapping it lightly seems to switch mine back on. i find it quite annoying also.
i am using a tool to light up my blue led when turned on.
so this cant happen to me anymore
korokor said:
What ROM are you using? I use DeFrost 2.3 and you can bring the phone out of standby by pushing the trackball button. A second push unlocks the phone.
Click to expand...
Click to collapse
Mine is unmodified and i'm not planning on changing that until HTC stops issuing updates. Sounds like a good feature though, bit of an oversight on the phone that.
stats101 said:
nope. just tapping it lightly seems to switch mine back on. i find it quite annoying also.
Click to expand...
Click to collapse
Yes, any sort of press turns the phone on.
snudel said:
i am using a tool to light up my blue led when turned on.
so this cant happen to me anymore
Click to expand...
Click to collapse
Careful, it may burn the LED out if you keep it constantly on.
rofl. this burn stuff is constantly floating aroung and is still crap.
why do you think, they enable the led while charging? because it is likely to burn?
who ever brought that up .......
snudel said:
rofl. this burn stuff is constantly floating aroung and is still crap.
why do you think, they enable the led while charging? because it is likely to burn?
who ever brought that up .......
Click to expand...
Click to collapse
I agree, I think the only LED to be worried about having on for long periods of time is the SUPER BRIGHT Camera Flash LED. It's obviously a different LED than the charging/notification ones, and snudel makes sense when he says that it's enabled while charging.
snudel, do you have a link for this blue LED app? I don't even think I've ever seen the blue LED on my Desire glow, but it would be neat to have it lit when the phone is "awake".
Cheers!
you can download a blue led app here:
http://forum.xda-developers.com/showthread.php?t=700418&highlight=blue+led
but don't know if this is the one that snudel uses (i think not)
http://forum.xda-developers.com/showthread.php?t=705645

[Q] Screen wont turn on after it turns off. ATT Tilt 2

Everytime I boot my phone up, it works fine up until when the screen goes into sleep mode. Once it goes into sleep mode I cannot turn the screen back on, it stays black. The keyboard, end and answer key lights show up when I press the power button but the screen just stays black no matter what button I press.
I end up having to either take the battery out or using the stick to press the reset button on the side in order to get the phone to where I can see the screen again. I have adjusted the settings to where the screen doesnt go into sleep mode and the screen just stays on but that drains my battery. I want to be able to have my screen go off so I can save power but if it goes off it wont come on again until I reboot.
I have done a hard reset. This problem started happening to me when I started using the Energy Rom but I've even flashed different Roms and the problem still exist.
Somebody please tell me what's wrong! I need help! This is a big annoying problem to have. Thanks.
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
sh4d0w86 said:
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
Click to expand...
Click to collapse
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
themasterhook2000 said:
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
Click to expand...
Click to collapse
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
sh4d0w86 said:
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
Click to expand...
Click to collapse
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
themasterhook2000 said:
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
Click to expand...
Click to collapse
: / sorry. i am unsure.
maybe you have a lose connection?
sh4d0w86.
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Same problem
themasterhook2000 said:
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Click to expand...
Click to collapse
My phone also dos not come back on, when I put it in out the sreen with the power button on top, or when the phone goes to sleep. Nothing can put it back on(opening te keyboard, pulling out the stylis, presing the answer-, windows-, back- and end button). I and up using a music players too keep the phone busy what's makes it operational. Cant really remember when this started happening exactly. My phone is at the moment loaded with a standard ROM. I used too have a custom ROM.
My TP2 does this too, although I only encounter the problem sometimes when someone calls. I answer and put the phone next to my ear, the screen goes black as it should and the phone just dies. I can't hear what the other person is saying and the screen wont turn on anymore. I have to take out the battery to reboot.
set light sensor to manual in settings. You have some bad or fragmented code causing the problem. Pretty common actually, many different reasons, but usually either a bad light or proximity sensor or software issue. Setting the sensor to manual should do it, if not, hard reset and allow the phone to fully set up before touching it, to allow full customization process to complete. Search my posts on SOD (sleep of death) for more information.
Funny this was brought up. Now im worried I just dropped 250.00 and have a new one coming.
Mine started with the ear piece quit working. couldnt hear anything except on speaker.
Anyway I started having the screen issue over a month ago, only way to get it back was soft reset with the stylus. Also when the screen was lit, I couldn't hit the power button to turn the screen off. At times the screen would be on 24/7 and I just dealt with it. The times when it decieded to go to sleep was when I needed the soft reset. Well long story short I forgot my charger one day at work and the battery died. after pressing the power button for hours with no response, moving the screen in all diffrent directions as I pressed the button.It came on once after hrs of messing with it. Well today it died again and I am fed up with it so out came the tools. Once I opened it up I noticed the ribbon that feeds the screen from the mother board was worn and torn. the ribbon slides everytime the keyboard is slid out and it rubs on both sides of the phone. I thought maybe mine was just a fluke and was installed wrong considering the phone being 10 months old but now I read this and see maybe its a common problem. The cheapest I could find the Ribbon was 56.00 so I didnt want to chance it not being the issue.

[Q] lcd (but not touch screen) turns off when slider moved

So my screen turns off (but is still active) when the slider is nudged a bit (either when closed or open). I've never dropped it and didn't update firmware. Pretty sure its faulty but just wanted to check if anyone else had the same problem. Oh because the phone thinks screen is on to get it back I have to press the power button twice (once to lock then unlock) this works most of the time but not always in which case I have to pull the battery.
Like this?
http://www.youtube.com/watch?v=fQXH5GAf9UA&feature=youtube_gdata_player
Jordanooo said:
Like this?
http://www.youtube.com/watch?v=fQXH5GAf9UA&feature=youtube_gdata_player
Click to expand...
Click to collapse
Similar but much worse. It takes that much movement to make the screen go off but once off it doesn't come back until you press power button twice ( and sometimes not even then)
I think I'll have to send it off for repair which is a right pain as I won't have my awesome phone for ages.
When i had that problem it only took the a week to repair it

My screen wont turn on. Help

Just yesterday i noticed that my phones screen was bugging out, eg. if it bumped into something or set down on a hard surface the screen would
flicker, similar to static, but only for a second. later that day, the screen went black, i thought the battery was low and did a quick battery pull
and it booted up normally. it happened again an hour or two later the, black screen that is. when i got home i really noticed the static as it was
placed on hard surfaces: the table, desk, etc. since it was low on battery i plugged it in to charge for a bit, when i came back to tun it on i was able
when when the screen timed out i wasn't able to turn it back on, i tried the battery pull but nothing, At that point the boot animations wouldn't show
the only things that indicated that the phone was turning on was the notification light and the pouch buttons. when it is "on" i'm able to swipe to
unlock, hold down and get the feedback of when you want to move an app or widget. The phone is on but the screen is black. oh and when i try
to go into recovery or download mode the screen is still black,
im wondering if its a busted screen but the thing is there are no cracks or anything on the screen maybe a few minor scratches but that's it
DavidCDM said:
May i ask how many remaining memory space you have on your phone?
Click to expand...
Click to collapse
truthfully, i haven't a clue, but i can guess, if you are talking storage wise, around 3-5 gigs.

Touchscreen Occasionally not responding

Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Sydrox said:
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Click to expand...
Click to collapse
Please upgrade to the newest firmware.
Sydrox said:
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Click to expand...
Click to collapse
Got the same issue on 52.0.A.8.50. Usually opening the app drawer then hitting back solves it - otherwise none of the virtual buttons work.
Searching the web it seems touch screen issues are pretty common on this phone. I'm a bit surprised there isn't more being said here about it. Some experience delayed response, dead areas and no response at all. I have all those issues. Yes I am on the latest firmware. I bought the phone used with a cracked screen. I checked it out and everything seemed fine. I didn't use the phone, just set it aside til replacement screen came. I should have used the phone to thoroughly check it out but didn't want to go through the set up process as I was thinking of B/L unlock and root. New screen came, put it on and seemed to be working fine then screen would be unresponsive. I did factory reset, software update, software repair, went into settings and made sure sure everything was good there, nothing helped. The center of the screen (it's low and a bit off center) is pretty much dead. To open launcher I have to touch and hold near the top of the display. Touch and hold apps is tricky. Usually the app just opens. When I do get it to hold, I can't drag it anywhere. Also, icons in the drop down menu cannot be rearranged or edited. I can swipe up/down, side to no problem. Whenever touch goes dead completely, the home, back and minimize buttons go grey. Tapping the power button gets them back functioning again. . Function test fail. Free draw lets me make a few seconds of scribbles then freezes. The x and rectangle block draw does the same. Tapping power button does nothing to unfreeze either. The color test pass even the block one where you toggle on/off sections of the screen in blocks. It's really weird. First impression would lead me to the screen but it really acts like a software issue. From what I've read so far this phone uses two different display drivers. I not seen anything on how to change that and it would more than likely mean B/L unlock and root, which I'm not against doing. I would just like to know definitively if it's hardware or software. Any input would be greatly appreciated.
Thanks
bobsright said:
Searching the web it seems touch screen issues are pretty common on this phone. I'm a bit surprised there isn't more being said here about it. Some experience delayed response, dead areas and no response at all. I have all those issues. Yes I am on the latest firmware. I bought the phone used with a cracked screen. I checked it out and everything seemed fine. I didn't use the phone, just set it aside til replacement screen came. I should have used the phone to thoroughly check it out but didn't want to go through the set up process as I was thinking of B/L unlock and root. New screen came, put it on and seemed to be working fine then screen would be unresponsive. I did factory reset, software update, software repair, went into settings and made sure sure everything was good there, nothing helped. The center of the screen (it's low and a bit off center) is pretty much dead. To open launcher I have to touch and hold near the top of the display. Touch and hold apps is tricky. Usually the app just opens. When I do get it to hold, I can't drag it anywhere. Also, icons in the drop down menu cannot be rearranged or edited. I can swipe up/down, side to no problem. Whenever touch goes dead completely, the home, back and minimize buttons go grey. Tapping the power button gets them back functioning again. . Function test fail. Free draw lets me make a few seconds of scribbles then freezes. The x and rectangle block draw does the same. Tapping power button does nothing to unfreeze either. The color test pass even the block one where you toggle on/off sections of the screen in blocks. It's really weird. First impression would lead me to the screen but it really acts like a software issue. From what I've read so far this phone uses two different display drivers. I not seen anything on how to change that and it would more than likely mean B/L unlock and root, which I'm not against doing. I would just like to know definitively if it's hardware or software. Any input would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
Maybe the Screen Connector wasn't 100% clean.
Or not only the screen is damaged.
I heard that the touch problems are mostly fixed with PIE. The closed source clearpad touch driver is..... Hoping Q gives us an further updated driver.
You still get sometimes ghost touches on higher workload or if the keyboard app is slow, but if you have dead spots the hardware sounds damaged.

Categories

Resources