Hi,
I'm trying to tether my Touch Pro 2 to my N95 (N95 acting as the modem as I want to use that SIMs data plan). When my TP2 tries to discover the N95 it only displays the "File Transfer" and "Serial Port Data Transfer" profiles. It does not display the Dialup Neworking Client profile (even though the N95 supports the DUN profile).
Looking through other threads I see that other devices (such as Blue Angel) which have had this issue have been resolved with some registry changes and replacing the BTWizardProfiles.dll. However, this DLL doesn't seem to be present on the TP2 - presumably because it's a different OS version and different BT stack.
I can't use the BT PAN profile as the N95 does not support PAN and I'd rather not go down the WiFi Joikuspot route.
Any ideas on how to add/enable the DUN Client profile?
Thanks,
Graeme
Related
This may have been asked already.
Ive been playing with my M2000 for a bit now and i cant seem to find a way i can make a BT modem conection through my Nokia 6630 (3G)
All i had to do on my M1000 was just create new dial up *99#
I want me 3G conection back!
grrr
I don't think Blue Angel doesn't has the right bt profile for that to work.
I seem to remember that it would need 'Dial up networking client' profile, but it only has 'Dial up Networking Server'.
Himalaya and Alpine has both.
JD
this is a problem with our bt stack, that not support BT dial up modem
regards
are there any workarounds, hacks, flashes, or programs that will allow this?
The Blue Angle buletooth have some bugs. I tried to swap another BT Engine/patch but it will disconnect in a large volume of traffic. You can find another BT Engine/Patch in the forum to test.
My Mobile Phone
XDA IIs and NEC 616 (3G)
dun(dial up network)vs pan(personal area network/internet connection sharing)+ usb vs bluetooth routing help?
i see the simplicity in PAN but for me it seems to be limited to just the use with one pc.
i have done some searches on the these subject.
i have seen some hacks to get PAN to work with multiple pc using bluetooth.
i want to see if Pan could be set up to share the internet with multiple pcs using the usb cable.
i would really like to find a way to have both DUN + PAN on the tytn running wm6.
i want to see if i could install DUN back on to a my tytn running wm6.
from what i have read it seems microsoft did not remove DUN and left it as an option.
other than that note it seems there is no install file available to the public to install DUN
if it has never been included in the rom.
i guess i would not worry about DUN if PAN could do everything i want.
i have shared multiple pcs before to connect to the internet using DUN.
i have had no luck with PAN.
in the end i really want to use the tytn as router to connect a handful of device to the internet.
is Pan really that limited or do i just nut understand it enough to maxims its benefits?
if PAN is that limited is there any real chance to get DUN back on wm6?
Hello,
I did a search and didnt find much, I also checked on Wiki and they explain how to use it as a modem via bluetooth dial up networking. I would like to use the bluetooth PAN feature in Internet Sharing but cant get it to work.
Firstly, I got the bluetooth dongle connected with the Bluetooth PAN. It tells me that they are connected and communicating with each other, the bluetooth software (bluesoleil) even provides me with an ip address, however when I try browsing on my laptop I get the message page cannot be displayed...
Can anyone please shed some light as to why it does not work?
Thanks a lot!
EDIT:
Seems like when the connection is established it gives the windows bluetooth adapter a weird ip address
like: 169.254.6.198
but I checked in network adapters of the 8525 everything is set for ip addresses to be assigned automatically .. strange..
in windows xp its also set to assign the ip address automatically :S
im not sure what else to do..
Launch Internet Sharing on your Hermes & set the PC connection to bleutooth PAN. Now, make sure the Network Connection is set to your correct data connectiion and press connect. It should say "Waiting for connection" Next, connect your PC & Internet Sharing should show "Connected". If you still can't surf then its a bluetooth driver issue on your PC. The built in M$ bluetooth stack (XP SP2 & >)works correctly with bluetooth PAN for sure. YMMV on others. The latest Toshiba BT stack definitely works too (based on pesonal experience).
Sleuth255 said:
Launch Internet Sharing on your Hermes & set the PC connection to bleutooth PAN. Now, make sure the Network Connection is set to your correct data connectiion and press connect. It should say "Waiting for connection" Next, connect your PC & Internet Sharing should show "Connected". If you still can't surf then its a bluetooth driver issue on your PC. The built in M$ bluetooth stack (XP SP2 & >)works correctly with bluetooth PAN for sure. YMMV on others. The latest Toshiba BT stack definitely works too (based on pesonal experience).
Click to expand...
Click to collapse
Hey,
Thats exactly what I did, and it gets connected on both ends..assigns a weird ip address.
I tried a few Roms, but now I am using urs the latest one dev 3.2
Always was a fan of your roms, but I cant get that bluetooth pan to work.
I also tried with WIDCOMM and Bluesoleil...
I get no where..
Anyone please??
Help!!
I guess I'll have to bump this thread to death in order to get some help !
man i had the same problem never got it figured out so if any one could help would be great
fb.knight said:
man i had the same problem never got it figured out so if any one could help would be great
Click to expand...
Click to collapse
Which bluetooth dongle you used...just curious?
Which chipset?
Ok, guys, got the problem resolved..it was the sucky bluetooth adapter from ebay "ISSC bluetooth adapter", piece of crap.. went to walmart got a usb 2.0 device for 25$ and all is well now.
I'm trying to connect a laptop and a desktop with bluetooth to the internet via my HTC-S620. I have no problems connecting to the internet via Bluetooth or USB but I want a solution for 2 devices to connect.
Even though Bluetooth and PAN seem to be all the rave, especially with support for mobile devices and USB dongles, I much prefer the flexibility and configurability of WIFI. Under XP, and I assume Vista, Internet Connection Sharing easily supports multiple clients. Under WM6 this does not seem possible even though it apparently provides a DHCP server.
If it were possible to somehow to access the internet from the desktop via the laptops Bluetooth that would be OK since the laptop would be gettig internet via USB but XP auto assigns the same IP as WM6 for ICS. Ideally, both the desktop and the laptop would connect to the internet via bluetooth directly.
Anyone know of any free solutions, hacks or applications that might help?
EDIT: Ok I saw a thread over in the Hermes forum where they were able to successfully connect 2 devices to Bluetooth internet sharing by hacking the registry keys HKLM\Comm\BTPAN1\Parms
AcceptConnections 0x1(1) to 0x2(2)
MaxConnections 0xA(10) to 0x2(2)
However this hack does not appear to work on the HTC-S620 WM61.
BlueTooth Dunn
GJSmith3rd said:
I'm trying to connect a laptop and a desktop with bluetooth to the internet via my HTC-S620. I have no problems connecting to the internet via Bluetooth or USB but I want a solution for 2 devices to connect.
Even though Bluetooth and PAN seem to be all the rave, especially with support for mobile devices and USB dongles, I much prefer the flexibility and configurability of WIFI. Under XP, and I assume Vista, Internet Connection Sharing easily supports multiple clients. Under WM6 this does not seem possible even though it apparently provides a DHCP server.
If it were possible to somehow to access the internet from the desktop via the laptops Bluetooth that would be OK since the laptop would be gettig internet via USB but XP auto assigns the same IP as WM6 for ICS. Ideally, both the desktop and the laptop would connect to the internet via bluetooth directly.
Anyone know of any free solutions, hacks or applications that might help?
EDIT: Ok I saw a thread over in the Hermes forum where they were able to successfully connect 2 devices to Bluetooth internet sharing by hacking the registry keys HKLM\Comm\BTPAN1\Parms
AcceptConnections 0x1(1) to 0x2(2)
MaxConnections 0xA(10) to 0x2(2)
However this hack does not appear to work on the HTC-S620 WM61.
Click to expand...
Click to collapse
Find my old thread on bluetooth dunn, but did you know that the bluetooth dunn codes are already in the Excalibur 6.1 ROM by Kavana and Ricky. You can connect your laptop and PC via bluetooth dunn to the Internet. I now use Kavana's latest 6.1 ROM because of the new Microsoft bluetooth stack. I now have stereo music with surround sound on my Excalibur's. Another thing, you can make phone calls via your BT headset using Microsoft's voice command..............!
Technology said:
Find my old thread on bluetooth dunn, but did you know that the bluetooth dunn codes are already in the Excalibur 6.1 ROM by Kavana and Ricky. You can connect your laptop and PC via bluetooth dunn to the Internet. I now use Kavana's latest 6.1 ROM because of the new Microsoft bluetooth stack. I now have stereo music with surround sound on my Excalibur's. Another thing, you can make phone calls via your BT headset using Microsoft's voice command..............!
Click to expand...
Click to collapse
How I connect to Internet via bluetooth?
Technology said:
Find my old thread on bluetooth dunn, but did you know that the bluetooth dunn codes are already in the Excalibur 6.1 ROM by Kavana and Ricky. You can connect your laptop and PC via bluetooth dunn to the Internet. I now use Kavana's latest 6.1 ROM because of the new Microsoft bluetooth stack. I now have stereo music with surround sound on my Excalibur's. Another thing, you can make phone calls via your BT headset using Microsoft's voice command..............!
Click to expand...
Click to collapse
I was using Bluetooth on a Windows 2003 Server for Small Business Server. I finally got tired of it disconnecting every few minutes so I use USB and all is ok there. BT PAN works just fine on my XP boxes. When on the road I often would like to have two or more computers share the BT internet. I will look into your suggestion of using DUN instead. Thanks.
LeoArg said:
How I connect to Internet via bluetooth?
Click to expand...
Click to collapse
Just go to your Communications Manager and select Internet Sharing and follow the prompts from there. Assuming you have BT and drivers on your PC, you should be prompted to pair the devices and establish a BT PAN.
Technology - I tried to find your BT DUN thread by doing a forum search for threads started by "technology" with keywords "bluetooth" and "dun" without success. Can you point my to the thread? Perhaps it was started by someone else.
I was unsuccessful in my attempt to have two clients connect via DUN to my HTC-S620, however, the search for a solution lead to enabling DUN on both my HTC-S620 (T-Mobile Dash with cooked ROM) and my Samsung T409. Both have EDGE data and with the connection teaming capabilites of the Intergate 8.5 software I am able to use both phone modems simultaneously. I have experienced burst speeds of 50.1KB/Sec or 501kB/sec so far.
The Samsung connects to DUN via USB cable and the HTC connects via Bluetooth DUN. Fortunately, I was able to configure the HTC USB Activesync connection as the internal network. I used a laptop that was disconnected from an ethernet or internal network so using the HTC Activesync connection was a work around. The Intergate software configures two connections for the internal network. One for the Intergate and the other for the Microsoft TCP/IP to access the intergate from the server PC. You can have other PCs use this teamed connection as well when connected and configured for a network setup. This was the final step in getting intergate to work properly. So the HTC is connected both via BT and USB.
Now here is the good part. The HTC has T-mobile Total Internet $19.99 but the Samsung has only T-mobile Web $5.99. I was able to configure the DUN settings and initialization strings on both modems for the T-mobile Web proxy (wap.voicestream.com) and (216.155.165.50:8080). The trick here was to configure Intergate to use the T-Mobile Total Internet connection as the primary or default connection. Subsequently, the Intergate connection teaming software is able to team both and where possible utilize both connections. The T-Mobile web connections can only use unblocked ports but it kicks in for port 80 and the other unblocked ports.
Connection teaming will only increase your available bandwidth with when there are multiple connections. So streaming and the like will see no improvement but surfing, downloading and other applications will see better overall performance.
Sweet!
Hi,
I haven't managed to get BT internet sharing working between the TP2 and my laptop. I've been trying to create a BT personal area network that enables internet sharing. Whenever i select the internet sharing option, it claims my laptop doesn't support it.
This is bogus, because i had the same laptop with the same setup working just fine through my old Tytn II. You just enabled internet sharing and away you go! How HTC have managed to mess this up is baffling (and annoying!). Trouble is i need to route my laptop through my phone or it's not very useful.
Is there any way that is known to work?
Thanks for any ideas,
Don't know if this is feasible in your situation, but can't you just use the USB cable and ICS? Tethering through BT would be slower and less reliable than using the cable.
It is easy but I'm not sure if you aware about the new widcomm btooth settings applet. In the 3rd tab, select Networking Manager > Share Internet Connection > Follow On Screen > Done.
I am having the same problems and I have tried the network manager > share internet connection but no luck. what makes my case worse is that i have the Toshiba bluetooth stack. any ideas?
gotta try that with tp2 btw yesterday when i tried to send some files from tp2 to my old hermes (tytn) it didn't work because tp2 claims 'device does not support a suitable service to perform this operation'. however the bt-link between my lap-top and tp2 or tytn works fine and i have used the internet sharing many times with my old tytn
so maby the are some issues with the newer bt? dunno
Eureka! I have manged to get a connection and i am posting this over it. But I tried so many things that I am going to have to delete the connection and start all over again so I can create a step by step guide for anyone that may be intersted. Test enviroment is TP 2 WM 6.1 (obviously) and Toshiba laptop with Toshiba stack running Vista.
You have the same problem as i did if you will get the error msg 'remote device does not support bluetooth PAN' and have a toshiba bluetooth stack. I should be back soon. Wish me luck so I dont mess up everything.
1. Enable BT on TP2 and make device discoverable
2. On laptop right click BT icon --> options --> General --> select PAN networking service
--> yes --> ok.
3. On laptpp right click BT icon --> add new connection --> custom mode --> next --> select your TP2 --> next --> select group ad-hoc network --> next --> next --> finish.
4. On your device --> open ICS --> select bluetooth PAN --> select your PC from list of BT devices --> accept connection on PC.
You should be good to go at this stage cos it works for me. If you dont mind leaving the PAN networking icon on your taskbar then you only need to do step 1 and 4 anytime you want to share your internet connection otherwise it will be step 1, 2 and 4.
Good luck and I hope someone finds this useful. I also hope in the future there will be an easier and more straightforward way to connect. There probably is now but I just dont know it. Half bread they say is better than none. cheers
If the fix from lombardo8 does not work/apply to you - try the following:
1) Setup/ connect an ordinary BT serial port from your PC to the phone.
2) Use the Widcomm BT applet as monx suggested above to setup the rest.
I have found that I cannot initiate any BT activity from my phone to the PC without a connection made from the PC to the phone first - even though the PC and phone both use Broadcomm stacks!
Also my Tytn II worked perfectly with my PC so likely not to be a PC problem.
Hope this helps...
lombardo8 - you are the dude!
this worked! indeed, i too am running the toshiba BT stack. it's the one i found before worked. I had tried creating all sorts of new connections from the PC settings, but the difference you have found is in the BT options/general settings.
Strangely, the "select PAN networking service" box was not checked. i guess this explains why PAN networking wasnt active. however, what is strange is that this must have worked before using my old TyTn II without this setting.
So once this is enabled, it makes a connection fine!
with regard to wire tethering, this is always a handy fallback, but i have found that BT usually worked quite well, once set up and working, additionally you dont need a wire.
For the life of me i cannot get it to work with my work notebook running Win7 and my netbook running Win7 & OSX
It's driving me nuts
Why can't they just leave it simple. Damn Bluetooth 2.1
Is there any chance somebody can have a .cabs to install back the old internet sharing where there is a Bluetooth PAN in the drop down list. I figured that would be alot easier.
I had the same issues with TP2 and a Mac Book Pro. It works perfectly on Windows XP on this machine but not in OSX. I found a solution for OS X though:
http://forum.xda-developers.com/showpost.php?p=4101986
Thanks for the info but now i'm getting the error msg below
"Failed to establish Internet Sharing connection to remote devices as it supports only Network Access Point (NAP) mode"
What does that mean and how do i configure it in OSX?? Appreciate any help with this as i need ISC in OSX.
Well it means that TP2 thinks that your Macbook offers the internet sharing and not the TP2. I get that same message until i kill the blued and tick that mark again. Then it works until next reboot where i have to repeat the sequence again. Which OSX Version and hardware are you using btw?
Seems the new Snow Leopard fixes some issues with bluetooth. I re-paired my TP2 with Snow Leopard and this works like a charm out of the box. No more fiddling with the bluetooth daemon. Let's see if it stays that way
Just disable DHCP on laptop/PC PAN & u r ready to go.
Scann69 said:
Is there any chance somebody can have a .cabs to install back the old internet sharing where there is a Bluetooth PAN in the drop down list. I figured that would be alot easier.
Click to expand...
Click to collapse
Yes bro. v1.11 will have this feature but still Widcomm stack & bt PAN working 100%
Bluetooth ICS Windows 7 WinMo 6.5
I'd like to chime in here. I've flashed several 6.5 ROMs, but with the 23016 and 23017 sys roms I can't seem to connect bia BT ICS. The USB cable works fine. It seems that my netbook does not acquire an IP address from the TouchPro. I'd sure like to find a fix for this as I use this technology all the time.
@izzyforreal
see my post above. did u disabled dhcp on ur netbook bt pan profile?
monx® said:
@izzyforreal
see my post above. did u disabled dhcp on ur netbook bt pan profile?
Click to expand...
Click to collapse
Hi monx!
How do you disable DHCP on the PC's BT PAN profile? I'm using Widcomm/Broadcom firmware 2.1.211.299 by the way.
And if I do disable it, how will the PC get an IP address??
Thanks,
- Shay
skamin said:
Hi monx!
How do you disable DHCP on the PC's BT PAN profile? I'm using Widcomm/Broadcom firmware 2.1.211.299 by the way.
And if I do disable it, how will the PC get an IP address??
Thanks,
- Shay
Click to expand...
Click to collapse
I've found the solution here. Not using the "Internet Sharing" application though but a couple of nice hacks. IT ACTUALLY WORKS!!!
See attached ZIP with files and that post quoted.
- Shay