I have Skype runing fine on my PDA2K using WIFI however it doesn't seem to work at all well when I have only a GPRS connection.
I have a Vodafone SE V800 3G/UTMS phone and had 3G data working with an IPAQ 5550 although didn't get a chance to try it with Skype before getting my PDA2K.
Unfortunately the dialup networking client option that was in the bluetooth manager on the IPAQ appears to be missing on the PDA2K. Somebody has done this before on a XDA II see http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=58&PN=1
however it looks like it is with an old version of the MS BT stack which I cannot load on to my device.
ROM ver: 1.22.00 WWE
ROM date: 10/22/04
Radio Ver: 1.06.00
Protocol ver: 1337.38
ExtROM: 1.22.162 WWE
Using broadcom BT-PPC/PE version 1.0.0 Build 3500
Any ideas.
Graham :?
Which GPRS service offering are you using? If you are using the bulk MediaNet from Cingular then I suspect if won't work. That GPRS connection is designed to support WAP and email only, so it only allows the use of certain ports. I don't know which ports SKYPE uses, but I don't think it's limited to Port 80.
It is Vodafone UK's mobile connect 3G/GPRS solution which on 3g is up to 384kbps download and it hands over to GPRS when outside of 3G coverage. I doesn't appear to be limited to specific ports as it works with HTTP, VPN, POP3, IMAP. There is an option to use Port 80 on the PC Skype app but I can't see that option on the pocket PC. At the moment I can't get even get my PDA2K to connect to my phone other than through a serial port. I will test Skype with a PC connected to my 3G phone to see if the data side works however it would be great for other apps if I could use the speedier 3G data connection through my PDA2K
grahamp said:
It is Vodafone UK's mobile connect 3G/GPRS solution which on 3g is up to 384kbps download and it hands over to GPRS when outside of 3G coverage. I doesn't appear to be limited to specific ports as it works with HTTP, VPN, POP3, IMAP. There is an option to use Port 80 on the PC Skype app but I can't see that option on the pocket PC. At the moment I can't get even get my PDA2K to connect to my phone other than through a serial port. I will test Skype with a PC connected to my 3G phone to see if the data side works however it would be great for other apps if I could use the speedier 3G data connection through my PDA2K
Click to expand...
Click to collapse
The PDA2K is a 2.5G device - so 3G will not be possible through it.
Are you able to connect to other non-web services via your GPRS connection such as email or msn or the likes? I know with O2 you have an O2 Active connection for web/wap and Mobile Internet for everything else.
You could try to get a freeware telnet client and telnet to the skype server on port 80 to see if it can resolve and reach it - this is one way to prove if your connection will allow it.
Both O2 2.5G (PDA2k) and my Vodafone 3G connections (v800) work no problem. I have a connection from my PDA2K to my 3G phone using the 3G modem in the V800 phone across the infrared connection and Skype connects and works. I however want to use Bluetooth rather than infrared as I have to hold my v800 phone right opposite the infrared port on my PDA2K for it all to work. I can't however find a way to create a bluetooth dial up networking connection to my V800 on the PDA2K. On my IPAQ 5550 I had a Bluetooth dial-up connection to the same phone and it worked fine on 3G. :roll:
they troubleshooted that problem at some time (Bt dial up) of our BT
Greetings
GPRS is not fast enough for making a skype call. It would also cost you a *fortune* in GPRS useage charges!!
3G is find in the down direction, but for VoIP, upstream is just as important. Anyone know what Voda 3G does upstream?
Nigel
veletron said:
GPRS is not fast enough for making a skype call. It would also cost you a *fortune* in GPRS useage charges!!
3G is find in the down direction, but for VoIP, upstream is just as important. Anyone know what Voda 3G does upstream?
Nigel
Click to expand...
Click to collapse
I was talking on skype over GPRS yesterday. Worked flawlessly. No delay on voice and no cutting of voice.
True, with the wrong GPRS plan you run up a cost, but otherwise it works fine.
3G's major flaw is the bandwidth limitation per AP. At 2mbit it just doesn't work well in populated areas. Besides, most 3G operators frown upon VoIP and file transfers over their network, hence trying to block it. Skype is hard to block since it cleverly looks for open ports, however, that causes voice cutouts and delays.
Hah! Try T-Mobile GPRS lmao. There is no way you can use SKYPE with TMO in US. NO WAY! If someone says you can there are full of sh.. I have a PDA2K and a XDA IIs. I tested them both with GPRS and it sounds like shi.. The only way SKYPE will work with no problems is with WIFI.
Vodafone 3G here in the UK maximum upload speed is 64kbps which IMHO should be enough for SKYPE latency could be a problem though. Unfortunately no futher forward in getting my PDA2K to dial up to 3G phone using Bluetooth. Does anybody know of a cradle that can hold the PDA2K and V800 so that the infrared ports face each other :lol:
Buying an xda2s and will join soon
You might look a bit like dom jollie when walking down the street though LOL. I use a voip and sip client on my 5550 and use this by the multitude of wifi access points around London.I have a voip pbx back at the office that i connect to and make calls from(out to the real world not to just other skype users) I have tried skype over GPRS 3G and wifi and found because of the limited bandwidth it worked in lumps of seconds at a time but was not consistant enough to be able to hold a conversation for longer than a couple of seconds (via gprs - Voda uk) and 3Gwork slightly smoother but still not as consistant as on wifi.This i can only put down to congestion on the networks.. Anyway i suppose i ambiased as i have access to pbx voip remotely..Another cheap way to make calls..LOL :lol:
Regards
Marquee
www.marqnet.net
Hi everybody,
when I try to connect my laptop to the internet using my SX66 and bluetooth, one of the following happens:
1) If gprs is already connected on the SX66, my laptop comes back and says 'phone is busy'.
2) If gprs is not connected, then I get a DUN connection, but no network connectivity. Connecting gprs then disconnects the DUN.
Is there a solution for this annoying crap? My old SE T616 let me DUN with my laptop just fine.
Could wiring the laptop to the SX66 with activesync, and some 3rd party app solve the problem?
thanks, I appreciate any comments or suggestions.
Also, could someone who has NOT applied the latest Siemens patch tell me if they get they same behavior?
update
Since I got the SX66, I've noticed the following bug.
The GPRS symbol appears in white briefly when I start up the phone, and then disappears.
If I connect using GPRS, then I get a black symbol which seems to stay after I've disconnected.
IF I try DUN when there is a disconnected, lingering black GPRS symbol it works. But if I actually connect GPRS, then it hangs up the DUN.
??????
Now I have a working solution. Before using Bluetooth DUN, connect and disconnect GPRS.
Out of curiosity, is this business unique to the SX66, or common across the Blueangel platform?
After searching for Bluetooth multitasking via Search function, it doesnt come up with any result, and also all I could read about Bluetooth is Earphone and Internet sharing settings.
I am concerning whether my HTC herms (8525) could bluetooth connect GPS and Laptop for internet sharing simultaneously.
I tried connect to Laptop and BT earphone at the same time, but while I tried to call and do the internet together, it didnt work. However, I was on GSM at the time I tested it(bad signal at home, no 3G available in apt.), so not accessing the internet and call signal should be reasonable.
Since I am not sure if they could be used together or not, I want to ask if anyone here knows the answer.
Thanks in Advance.
BT - WIFI interfirence
Try this on your Excalibur:
Establish connection with BT headset
Dial voice number
Activate WIFI at the same time
Did you hear any crackling and noise in your BT headset?
i'll try this a bit later when i get the chance, but isn't it common to have some interference if data is transmitting for both since they're both operating on 2.4ghz? also, what headset are you using? bt 1.2 should be better than 1.1
JwY said:
i'll try this a bit later when i get the chance, but isn't it common to have some interference if data is transmitting for both since they're both operating on 2.4ghz? also, what headset are you using? bt 1.2 should be better than 1.1
Click to expand...
Click to collapse
Well, I don't have this problem with TyTn.
I've tried Nokia BH 900 and Jabra JX10 - both 2.0
I'm glad i saw this thread. I'm having the same issue. I cannot stream music to my motorola ht820 bluetooth stereo headset if i use wifi. It just keeps stopping and freaks out on me. I was having issues streaming videos to my dash via wifi and using the headset also. I could not stream 100kbps videos over wifi! I thought the phone just wasn't powerful enough. (although it's not.. I could stream 300kbps videos on my old hp 3615 via wifi fine.)
I just was able to stream a video at 300kbps fine without bluetooth turned on using wifi and it worked fine. Grr!!
BT and wifi both use the same frequency.
I think you shoud try an other channel for the wifi. It may solve your problem.
Wifi how do you set IPs/DNS info?
did i over look something i can't figure out how to set IP, DNS and Subnet for my phone. I've gone to every connection screen did i over look something?
Internet via WiFi - Wireless Access Points Only
I am not subscribing to the data service on my cellular net. I only want to be able to access the net and email when I am in range of my WAP at home/work or at my favorite hot spots. I've got the WiFi settings so that I am connecting to my WAP and can see the SSID when it connects.. I've tried adjusting the settings in the IE options and am at the point where once in a while (1 out of 8 or so ) I can open access one page of a web site.. but can not navigate any further. If I type a different URL in it says locating and loading then times out.... what did I miss???
T-Mobile Dash / Re-ROM-ed to Excaliber.
All other functions seem to be OK.
Thanks, XmP
I've seen this as well. Playing around earlier today, I installed Opera Mini. Opera works fine over wifi or edge. I believe that the issue involves one or more IE bugs involving either the size (fragmentation?) of cache and/or scripts.
Also, Opera Mini isn't a solution (yet) either. It works great once installed and launched from the installer - but has to be uninstaller and reinstalled to work after you exit.
I can't wait for a linux port
I run into this problem all the time at my college and at my home. I turn on my wifi and the phone defaults to the network instead of wifi. I am on cingular with the 8125, I was using I/S PL 1.08 i just updated to cingular rom 2.24.10.1 WWE. I have tried IE, Opera, Mozilla (Minimo) and another i forget the name of. In all I preferred Opera but I feel Mozilla will be the best once the bugs are gone.
Oh yah and when I try and connect to the wifi network at my school they require a redirect to login through bluesocket. That is just too difficult for my little wizard and I rarely get through that system.
External antenna jack on Excaliber/Dash... is it just for GSM? or also WiFi?
Anyone had experience with the external antenna jack on the back of the Dash (under the mirror button)? Just wondering if using this connector would improve performance on WiFi? or is it designed only for GSM reception?
I found a cable which fits the connector perfectly. Thanks for your responses.
Issue solved!
I rebooted my wireless router and everything works great...
Bump!
I'm guessing the absence of answers means that the settings cannot be changed (or may need a reg hack to do so) - I can't find them anywhere either...
so it works for an external wifi as well?
yes, it is possible to change these settings (or at least the IP adress). I have read about it, but can't remeber where. It's possible to chnge it somewhere in the registry, can't be changed directly through settings. If I find it, where I read about it, I will post it here ...
As I remember the external is designed for car holder external antenna, not for WiFi. You may find at most of the GSM mobile back also have this.
This was posted over at howardforums too. What, you didn't search the internet endlessly to find an answer?
Above poster is correct, it's for GSM only. Like I said over at HoFo, unless you're lost in the backwoods, I don't think it's going to help much. Plus, it looks a tad silly!
Thanks for all your responses. Yeah, I posted the question in a couple of forums (the level of expertise varies widely, as you know!).
Reason I asked... we want to be able to access realtime weather conditions while at a remote nature facility on a barrier island here on the West Coast of Florida -- you know, like hurricanes There is a weak WiFi signal from an access point about 1/4 mile away. I simply wanted to establish a stronger link by using an external antenna.
So although it might have looked silly, it was to be a quick fix for instant weather updates (like radar), when needed.
Wifi connection sloooow. For you also?
Hi, with my stock htc s620, establishing a connection to a wifi network that is already saved (home & work), takes around 1 to 2 mins.
What often happens also is that it goes to sleep before even connecting (with me waiting in IE or mail to clic on a favorite or do a send & receive action).
I can't understand this since a nokia n80 will take seconds and it's almost instantaneous on my macbook.
Are there any tricks or software that can accelerate this (unless I'm the only one to have this problem)?
Seems to be a problem of your hardware or a configuration problem. I have energy save mode enabled and usually it takes two or three seconds to connect, sometimes up to ten seconds, if it has extremly low WiFi-Signal.
interesting, I'm going to investigate on the software part first... You really think it could be a hardware issue?
What's sure is that once the connection is established, it's fast and doesn't drop.
BTW, do you mean seconds after the handset is waken up from sleep?
Hum, after looking in my Remove section on my handset, nothing appears, is there some kind of registry cleaner for smartphone?
Hi,
I'm trying to tether my Touch Pro 2 to my N95 (N95 acting as the modem as I want to use that SIMs data plan). When my TP2 tries to discover the N95 it only displays the "File Transfer" and "Serial Port Data Transfer" profiles. It does not display the Dialup Neworking Client profile (even though the N95 supports the DUN profile).
Looking through other threads I see that other devices (such as Blue Angel) which have had this issue have been resolved with some registry changes and replacing the BTWizardProfiles.dll. However, this DLL doesn't seem to be present on the TP2 - presumably because it's a different OS version and different BT stack.
I can't use the BT PAN profile as the N95 does not support PAN and I'd rather not go down the WiFi Joikuspot route.
Any ideas on how to add/enable the DUN Client profile?
Thanks,
Graeme