I've read all posts on the issue because it seems to be a common one , here's the story, I received this phone from a friend already bricked , what happens wen I try turnin it on it just stuck in booting
I can't hard reset
I can't flash, I either get invalid vendor I'd or model Id. Or curropt file ,
I already kno its not cid unlocked and apparently no form of unlocking was done to it ,
But in its current state what can be done , because I've tried everything already within my knowledge
One other issue is I don't kno what is the stock rom for it so I can't flash without getting invalid vendor I'd , it unbranded and just says htc ,
Exca100
That's what's written on d back
What can be done ???
Thx in advance
Anybody ? I know its a simple fix , I just wanna know what can be done
all i can think of is download the htc ROM (in the official roms sticky)since its an unbranded phone and hold camera while powering on and flash. sorry I cant be much help in this area, just and idea I dont know if you tried it yet.
I did try all htc roms and it says invalid vendor I'd or incorrect model
That's why I can go any further
Hope this links helps:
http://forum.xda-developers.com/showthread.php?t=397583
And:
http://forum.xda-developers.com/showthread.php?t=415225
Good luck,
orb3000 said:
Hope this links helps:
http://forum.xda-developers.com/showthread.php?t=397583
And:
http://forum.xda-developers.com/showthread.php?t=415225
Good luck,
Click to expand...
Click to collapse
NONE a these linx helped
i have the same problem when flash to energy rom, it just stucks at booting screen and i cant do nothing about it, i cant connect to usb, what should i do ???
alexalexoe said:
i have the same problem when flash to energy rom, it just stucks at booting screen and i cant do nothing about it, i cant connect to usb, what should i do ???
Click to expand...
Click to collapse
Did you CID unlocked your device before? If so, try an original rom from the sticky posted in the first page.
it wasnt
but its offficial now i tried all the roms there
none works
Then CID unlock it now. . .That's the problem for why you cant use any other ROMs.
~~Tito~~ said:
Then CID unlock it now. . .That's the problem for why you cant use any other ROMs.
Click to expand...
Click to collapse
there is still no way to cid it because i cant in the stock rom for it
it keeps telling me invalid vendor id or model id
the sn number is
sz750fj04212 xe
can that help
Try messing with this.
~~Tito~~ said:
Try messing with this.
Click to expand...
Click to collapse
wont work
flashing spl gives invalid vendor id
OMG, I think my phone is bricked 4ever, this is hopeless ...
duplicate, sorry
dtgo said:
wont work
flashing spl gives invalid vendor id
Click to expand...
Click to collapse
My recommendation is that you contact your carrier and see if they can flash it to an original rom. HTC also can provide you a solution and hopefuly they can give you the original rom of your excalibur.
Good Luck,
Makes no sense because in jamaica they don't do repairs like that here especially if it wasn't bought from them
is it a dead case ?
dtgo said:
Makes no sense because in jamaica they don't do repairs like that here especially if it wasn't bought from them
is it a dead case ?
Click to expand...
Click to collapse
It's not a dead case, if you can get it to bootloader your S621 is not dead try again to flash in different PC's and see what happens. See this thread it may be helpful http://forum.xda-developers.com/showthread.php?t=534725 because it definitely gives you hope.
Try this:
* Shut Down the device
* hold down the camera button located to the right of the space bar for like 10 seconds,
* while still holding it down plug the USB in and you should see the menu come up with three colors.
* This is where you load your original ROM and can connect with ur PC .......
* perform Install the OLD ROM (After Installation page seems to be stuckon T-Mobile Logo but give it 1-2 Minuts and it will switch to Cold Boot Device configuration)
* make sure @ll is ok : then Reboot
* Install the Updated one from NRG
Related
I have bought an universal used by the foreign countries... I have tried to change the language but to the beginning the installation it jammed.... I have tried to remove the file of the radio from the packet of the installation and the installation you/he/she has gone to good end.... only that when I restart... on the first screen it goes out: No GSM.... have tried to put him the radio apart but doesn't go... the installation jams to 0% and after goes out me error....... I Help!!
sorry for my bad english..
I understand Your concern, i think you got stuck on "boot screen"
Read this; http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
I suggest you to go back to the official jasjar ROM! you can download the latest version on imate website, and Flash it. Seat back and explore this forum, go find and understand the correct information about whatever things you planed to do with your jasjar. you can start from this as well; http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck friend
If you find the screen blank or you can only see "serial" and "v.xx" at the bottom, you can try this; http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
If none of those solved your problem, please explore this thread; http://forum.xda-developers.com/showthread.php?t=289325
i have some problem like that.suddenly my 02 exec showed no radio rom and no IMEI.there was nothin in protocol version as well.since then i`ve been tryin update radio rom but its givin radio rom update error 114.since then i`ve tried it many times but to no avail.now my exec has no signal.cant update the radio rom as well.plz can some one help.waitin for reply ......
ifrahim said:
i have some problem like that.suddenly my 02 exec showed no radio rom and no IMEI.there was nothin in protocol version as well.since then i`ve been tryin update radio rom but its givin radio rom update error 114.since then i`ve tried it many times but to no avail.now my exec has no signal.cant update the radio rom as well.plz can some one help.waitin for reply ......
Click to expand...
Click to collapse
i have the same problem....please help us!!
Your device, is it already unlocked to all networks?
SteedMo said:
Your device, is it already unlocked to all networks?
Click to expand...
Click to collapse
yes.....
now i foud it...
Have you tried to flash the Official ROM?
SteedMo said:
Have you tried to flash the Official ROM?
Click to expand...
Click to collapse
yes i have..
Try out "task 28 55aa", it will absolutely cleared out your OS.
Then you can try to flash the new rom you like.
http://forum.xda-developers.com/showthread.php?t=289325
SteedMo said:
Try out "task 28 55aa", it will absolutely cleared out your OS.
Then you can try to flash the new rom you like.
http://forum.xda-developers.com/showthread.php?t=289325
Click to expand...
Click to collapse
i did it....but the problem remains
Im sorry friend, i dont have further experience for this.
Maybe what happening here because of physical problem (there was component inside broken or nonfunctional part) could be due to water damage? dropped? or else?
But lets keep trying..
Anyone please HELP...
flaviopr said:
yes i have..
Click to expand...
Click to collapse
yes but while flashin it gives the country code error with original rom and when tryin with other roms it gives radio update error.if anyone can help...
County code error?
Read here http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
Is there HARD SPL for universal??
SteedMo said:
County code error?
Read here http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
Click to expand...
Click to collapse
when i use MaUpgradeUt_noID.exe,there is no country code error but then the error is 114 radio rom update error
flaviopr said:
i did it....but the problem remains
Click to expand...
Click to collapse
same here
Hi All,
When i tried flashing my rom and upgrade to wm6, with uspl, i get error 270 - "The image file is corrupted. Please check your update utility".
I have O2- Xda Orbit...
Any suggestions ??
http://forum.xda-developers.com/showthread.php?t=311650&highlight=idiot
I dont see the asnwer....
can you please be more specific ? I reviewed all the pages..
Thanks
http://forum.xda-developers.com/showthread.php?t=313486
To be honest I am fairly busy right now so I just posted the links for quick reference, Are you using Vista, I will assume so because thsi is a known issue with this OS. If so
refer here
http://forum.xda-developers.com/showthread.php?t=312052&highlight=vista+drivers
For future reference, The best thing to do when asking for specific help is to give as much info as possible, just trying to help.
I hope this puts you on the right path, it took me HOUR AND HOURS of reading so I totaly understand where your at, good luck
To get rid of this error try using another PC. It fixed things for me.
I dont have...
Vista, but i will try to do it on my laptop...lets see if it works..
It doesnt work...
I tried a different pc, and both working with XP....any ideas anyone how to olve this error?
many thanks
igal said:
I tried a different pc, and both working with XP....any ideas anyone how to olve this error?
many thanks
Click to expand...
Click to collapse
did you first run the uspl program from POF because i think your device is CID locked
I'm using
USPL by POF...is there a way to check if my device is cid locked ?
igal said:
USPL by POF...is there a way to check if my device is cid locked ?
Click to expand...
Click to collapse
the most devices are cid locked. If you use this program before every rom flash your device is cid unlocked until you give your device a hard reset. Just read the manual that i had post along the USPL file
If im able...
To swap between carriers ( Orange, O2, and etc...) does it mean its unlocked ??
Thanks
nope there is a sim lock and a CID lock on the device the things are not the same. Sim Lock is for your provider. CID lock is on the phone so you can't flash other roms to the device than the rom of your first provider that gave you the device.
I was also trying lots of things and suddenly it worked. Important is that when it looks like the device freezes/shuts down, that you don't reset or anything, just leave it and Just unplug the cable, reconnect and after that try the romupdate.exe again... It should work...
Can anyone tell me how do i..
CID unlock it ?? I tried one of the soft's here, it doesnt seem to work ( or atleast i dont know...).
Anyone ??
Hi,
I flashed the SPL with 1.56.OliNex but i got a ERROR [270] UPDATE ERROR - The image file is corrupted. please check your update utility.
on my bootloader screen: Upgrade ROM code error Please try again
ayingha said:
Hi,
I flashed the SPL with 1.56.OliNex but i got a ERROR [270] UPDATE ERROR - The image file is corrupted. please check your update utility.
on my bootloader screen: Upgrade ROM code error Please try again
Click to expand...
Click to collapse
its ok now i redownloaded the files and everythings be ok!
please help me restore my diamond (DIAM100), i flashed it with a CDMA ROM and it hangs at the black "Touch DIAMOND" logo screen. I can enter bootloader, what can i do? Please
If it goes to bootloader, just connect with usb cable and flash with a GSM rom while in bootloader
tonio94 said:
If it goes to bootloader, just connect with usb cable and flash with a GSM rom while in bootloader
Click to expand...
Click to collapse
it works just like that??? or i need a different Diamond custom ruu..? or another flash tool.. i will try this in the evening because now i can't, but i want to be documented when i begin
as tonio94 says, if you can manage to get in to the tri-colored bootloader all you need to do is to flash with a rom that supports your phone... did you remember to hard-spl you phone before all this "mess" or?...
Arju007 said:
as tonio94 says, if you can manage to get in to the tri-colored bootloader all you need to do is to flash with a rom that supports your phone... did you remember to hard-spl you phone before all this "mess" or?...
Click to expand...
Click to collapse
i'm not a total noob in flashing..i just did a mistake...(did not read the post...damn)
i can enter bootloader but i NEVER flashed a rom from bootloader,only from activesync, i don't know if when in bootloader the custom ruu recognizes the phone..or i need another flash tool. im really mad at myself...
i have Hard-SPL
skero666 said:
i'm not a total noob in flashing..i just did a mistake...(did not read the post...damn)
i can enter bootloader but i NEVER flashed a rom from bootloader,only from activesync, i don't know if when in bootloader the custom ruu recognizes the phone..or i need another flash tool. im really mad at myself...
Click to expand...
Click to collapse
No other tools are required. Just put your device into booloader and connect with pc. The bottom of the screen should read USB. At this stage just follow the instructions that you would normal follow when executing the RUU_exe.
I'm sure you have already done this before but here is a guide ....http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26&limit=1&limitstart=4
band27 said:
No other tools are required. Just put your device into booloader and connect with pc. The bottom of the screen should read USB. At this stage just follow the instructions that you would normal follow when executing the RUU_exe.
I'm sure you have already done this before but here is a guide ....http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26&limit=1&limitstart=4
Click to expand...
Click to collapse
10x allot for your positive feedback, i now how it's done, just i could not believe it is so simple, i thought i bricked my phone, i will try it this evening when i get home.
thank you again
Problem solved, worked to flash like a charm.
thank's
This thread can be closed.
@skero666: i never recalled you as a noob.. i was just trying to give you an easy answer, sorry if i wasn't clear enough.. (^^,) .. and yeah, if you ever manage to get to tri-color bootload then you'll allways be safe... you'll never brick it unless you never manage to get to bootload .. lol
skero666 said:
Problem solved, worked to flash like a charm.
thank's
This thread can be closed.
Click to expand...
Click to collapse
You were lucky - glad you got it sorted
what if it does not even go into bootloader mode? is there a way out of this?
cheers.
I need help changing htc raphael gsm to cdma
I have htc fuze with att provider. im wanna change carrier to boostmobile and keep using my phone. what can i do to change from gsm to cdma. help please.
HI,
I did a very stupid thing with my diamond ... something was wrong with the device from the beginning, I used to get a 262 error then updating ROM. I tried everything, but nothing worked. then I decided to try the CDMA hardspl, unfortunately... that was a big mistake... .
Now I cant turn on the device at all . So I am wondering if it's possible to fix my diamond now, or should I go to warranty service directly?
/Andreas
200764 said:
HI,
I did a very stupid thing with my diamond ... something was wrong with the device from the beginning, I used to get a 262 error then updating ROM. I tried everything, but nothing worked. then I decided to try the CDMA hardspl, unfortunately... that was a big mistake... .
Now I cant turn on the device at all . So I am wondering if it's possible to fix my diamond now, or should I go to warranty service directly?
/Andreas
Click to expand...
Click to collapse
Yeah, if the device can't even turn on and get to bootloader mode, then return it for service right away.
200764 said:
HI,
I did a very stupid thing with my diamond ... something was wrong with the device from the beginning, I used to get a 262 error then updating ROM. I tried everything, but nothing worked. then I decided to try the CDMA hardspl, unfortunately... that was a big mistake... .
Now I cant turn on the device at all . So I am wondering if it's possible to fix my diamond now, or should I go to warranty service directly?
/Andreas
Click to expand...
Click to collapse
Maybe you´ll find the answer in this thread: http://forum.xda-developers.com/showthread.php?t=488687&highlight=cdma+gsm
hi guys, i got a new HTC ONE M8 from China Mobile 3 days ago, when i got home i realized that it works with Sina Weibo instead of asking me for my google acount like all the previous Android phones i had before, i went to the store asked for a refund.. not happening. I paid 800 bucks for a phone i cant use.. so i went ahead and tried to solve the issue and root it, i followed a threat here every instruction but i messed up somehow and at the end i wasnt able to enter the recovery mode, so i couldnt install the rom i downloaded (this is the guide i followed http://forum.xda-developers.com/showthread.php?t=2705292 ) so being unable to do anything i went to a tech today, he charged me 100 bucks to "solve the problem" and he was able to S-OFF the phone and i was finally able to get into recovery mode with TWRP but he said he didnt have any rom cause the phone was too new.. so i came back home where i had the ones i downloaded from the link i posted above... followed the insutrctions and installed the rom, everything seemed to be fine but then when it rebooted, nothing happens, the phone is stuck on fastboot mode and wont load into the operating system, i have tried to reboot a million times, updated the kernel , updated the twrp... still nothing. i am in china and have been trying to find another tech.. no luck at all. can someone help me or give me ideas on what to do? i would really appreciate the help!
maoa2121 said:
hi guys, i got a new HTC ONE M8 from China Mobile 3 days ago, when i got home i realized that it works with Sina Weibo instead of asking me for my google acount like all the previous Android phones i had before, i went to the store asked for a refund.. not happening. I paid 800 bucks for a phone i cant use.. so i went ahead and tried to solve the issue and root it, i followed a threat here every instruction but i messed up somehow and at the end i wasnt able to enter the recovery mode, so i couldnt install the rom i downloaded (this is the guide i followed http://forum.xda-developers.com/showthread.php?t=2705292 ) so being unable to do anything i went to a tech today, he charged me 100 bucks to "solve the problem" and he was able to S-OFF the phone and i was finally able to get into recovery mode with TWRP but he said he didnt have any rom cause the phone was too new.. so i came back home where i had the ones i downloaded from the link i posted above... followed the insutrctions and installed the rom, everything seemed to be fine but then when it rebooted, nothing happens, the phone is stuck on fastboot mode and wont load into the operating system, i have tried to reboot a million times, updated the kernel , updated the twrp... still nothing. i am in china and have been trying to find another tech.. no luck at all. can someone help me or give me ideas on what to do? i would really appreciate the help!
Click to expand...
Click to collapse
hi..my m8 china is stuck on boot and now it is totally dead after flashing it with a wrong ROM.. i searched the internet for the right firmware but found nothing..please where can i get the right ROM ..pls pls it would be a big help if you could give me the download link:crying:
marchjunah07 said:
hi..my m8 china is stuck on boot and now it is totally dead after flashing it with a wrong ROM.. i searched the internet for the right firmware but found nothing..please where can i get the right ROM ..pls pls it would be a big help if you could give me the download link:crying:
Click to expand...
Click to collapse
You should be able to just flash any GSM ROM unless the Chinese model is a different variant. You could have bricked it, never a good idea to flash incorrect ROM for a device.
May I ask what ROM did you flash and for what device?
marchjunah07 said:
hi..my m8 china is stuck on boot and now it is totally dead after flashing it with a wrong ROM.. i searched the internet for the right firmware but found nothing..please where can i get the right ROM ..pls pls it would be a big help if you could give me the download link:crying:
Click to expand...
Click to collapse
What does "totally dead" mean? Any charge LED? Any response when connected to a computer.
Also, not a good idea to dig up a thread from 5 months ago, with limited relevance. The top post did different steps, and was stuck in fastboot, which doesn't sound the same as your situation.
redpoint73 said:
What does "totally dead" mean? Any charge LED? Any response when connected to a computer.
Also, not a good idea to dig up a thread from 5 months ago, with limited relevance. The top post did different steps, and was stuck in fastboot, which doesn't sound the same as your situation.
Click to expand...
Click to collapse
Well at least we know he did some searching before he posted
BerndM14 said:
Well at least we know he did some searching before he posted
Click to expand...
Click to collapse
And that his favorite color is fuchsia.
Just downloaded this:
http://android-revolution-hd.blogspot.co.il/p/android-revolution-hd-mirror-site-var.html?m=1
put on microsd using a card reader/adapter
Enter twrp, choose install from zip, choose microsd, and install.
K-a-M-u-Z-u said:
Just downloaded this:
http://android-revolution-hd.blogspot.co.il/p/android-revolution-hd-mirror-site-var.html?m=1
put on microsd using a card reader/adapter
Enter twrp, choose install from zip, choose microsd, and install.
Click to expand...
Click to collapse
Link doesn't work. Sure it's m8 version?
KJ said:
Link doesn't work. Sure it's m8 version?
Click to expand...
Click to collapse
its a link to all RevolutionHD versions, the htc one m8 links are on the top.
here are direct links:
HTC One 2014 (M8)
KitKat (Android 4.4.3 + HTC Sense 6.0)
Download Android Revolution HD 11.2
Stock KitKat (Android 4.4.3 + HTC Sense 6.0)
Download stock odexed 2.22.401.4
Download stock de-odexed 2.22.401.4
Download stock recovery 2.22.401.4
md1008 said:
You should be able to just flash any GSM ROM unless the Chinese model is a different variant. You could have bricked it, never a good idea to flash incorrect ROM for a device.
May I ask what ROM did you flash and for what device?
Click to expand...
Click to collapse
i flashed it with ROM for mt6572 m8 4.2.2 android, but the model manufacturer is different.. mine was xiaoxing china.. i think i bricked it..is there any other way to bring it back to life?
---------- Post added at 11:49 AM ---------- Previous post was at 11:39 AM ----------
redpoint73 said:
What does "totally dead" mean? Any charge LED? Any response when connected to a computer.
Also, not a good idea to dig up a thread from 5 months ago, with limited relevance. The top post did different steps, and was stuck in fastboot, which doesn't sound the same as your situation.
Click to expand...
Click to collapse
dead as not charging when connected via usb..doesn't power on at all, download mode cannot be set. .but computer with mtk driver installed in it can detect the phone. .
here are the phone specs:
mt6572
model: m8
manufacturer: xiaoxing
android ver: 4.2.2
sw version: alps.jb3.mp.v1
is there any other way to bring it back to life? plss help
xiaoxing m8 flash solved
md1008 said:
You should be able to just flash any GSM ROM unless the Chinese model is a different variant. You could have bricked it, never a good idea to flash incorrect ROM for a device.
May I ask what ROM did you flash and for what device?
Click to expand...
Click to collapse
hi again. .thanks to those who helped me here xda members/mentors ..after 3 weeks, i was able to flash my xiaoxing m8 using sp flash tool version 2.111 and a downloaded ROM from google. .for those with thesame problem, use older version sp flash tool and a lot of patience ..
HTC One M8 ROM
marchjunah07 said:
hi again. .thanks to those who helped me here xda members/mentors ..after 3 weeks, i was able to flash my xiaoxing m8 using sp flash tool version 2.111 and a downloaded ROM from google. .for those with thesame problem, use older version sp flash tool and a lot of patience ..
Click to expand...
Click to collapse
May i know where did you find the Old Rom of HTC one M8 China phone? Please Send me a Link. Its for MTK6572.
What Device you have?