Hi All,
When i tried flashing my rom and upgrade to wm6, with uspl, i get error 270 - "The image file is corrupted. Please check your update utility".
I have O2- Xda Orbit...
Any suggestions ??
http://forum.xda-developers.com/showthread.php?t=311650&highlight=idiot
I dont see the asnwer....
can you please be more specific ? I reviewed all the pages..
Thanks
http://forum.xda-developers.com/showthread.php?t=313486
To be honest I am fairly busy right now so I just posted the links for quick reference, Are you using Vista, I will assume so because thsi is a known issue with this OS. If so
refer here
http://forum.xda-developers.com/showthread.php?t=312052&highlight=vista+drivers
For future reference, The best thing to do when asking for specific help is to give as much info as possible, just trying to help.
I hope this puts you on the right path, it took me HOUR AND HOURS of reading so I totaly understand where your at, good luck
To get rid of this error try using another PC. It fixed things for me.
I dont have...
Vista, but i will try to do it on my laptop...lets see if it works..
It doesnt work...
I tried a different pc, and both working with XP....any ideas anyone how to olve this error?
many thanks
igal said:
I tried a different pc, and both working with XP....any ideas anyone how to olve this error?
many thanks
Click to expand...
Click to collapse
did you first run the uspl program from POF because i think your device is CID locked
I'm using
USPL by POF...is there a way to check if my device is cid locked ?
igal said:
USPL by POF...is there a way to check if my device is cid locked ?
Click to expand...
Click to collapse
the most devices are cid locked. If you use this program before every rom flash your device is cid unlocked until you give your device a hard reset. Just read the manual that i had post along the USPL file
If im able...
To swap between carriers ( Orange, O2, and etc...) does it mean its unlocked ??
Thanks
nope there is a sim lock and a CID lock on the device the things are not the same. Sim Lock is for your provider. CID lock is on the phone so you can't flash other roms to the device than the rom of your first provider that gave you the device.
I was also trying lots of things and suddenly it worked. Important is that when it looks like the device freezes/shuts down, that you don't reset or anything, just leave it and Just unplug the cable, reconnect and after that try the romupdate.exe again... It should work...
Can anyone tell me how do i..
CID unlock it ?? I tried one of the soft's here, it doesnt seem to work ( or atleast i dont know...).
Anyone ??
Hi,
I flashed the SPL with 1.56.OliNex but i got a ERROR [270] UPDATE ERROR - The image file is corrupted. please check your update utility.
on my bootloader screen: Upgrade ROM code error Please try again
ayingha said:
Hi,
I flashed the SPL with 1.56.OliNex but i got a ERROR [270] UPDATE ERROR - The image file is corrupted. please check your update utility.
on my bootloader screen: Upgrade ROM code error Please try again
Click to expand...
Click to collapse
its ok now i redownloaded the files and everythings be ok!
Related
I have bought an universal used by the foreign countries... I have tried to change the language but to the beginning the installation it jammed.... I have tried to remove the file of the radio from the packet of the installation and the installation you/he/she has gone to good end.... only that when I restart... on the first screen it goes out: No GSM.... have tried to put him the radio apart but doesn't go... the installation jams to 0% and after goes out me error....... I Help!!
sorry for my bad english..
I understand Your concern, i think you got stuck on "boot screen"
Read this; http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
I suggest you to go back to the official jasjar ROM! you can download the latest version on imate website, and Flash it. Seat back and explore this forum, go find and understand the correct information about whatever things you planed to do with your jasjar. you can start from this as well; http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck friend
If you find the screen blank or you can only see "serial" and "v.xx" at the bottom, you can try this; http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
If none of those solved your problem, please explore this thread; http://forum.xda-developers.com/showthread.php?t=289325
i have some problem like that.suddenly my 02 exec showed no radio rom and no IMEI.there was nothin in protocol version as well.since then i`ve been tryin update radio rom but its givin radio rom update error 114.since then i`ve tried it many times but to no avail.now my exec has no signal.cant update the radio rom as well.plz can some one help.waitin for reply ......
ifrahim said:
i have some problem like that.suddenly my 02 exec showed no radio rom and no IMEI.there was nothin in protocol version as well.since then i`ve been tryin update radio rom but its givin radio rom update error 114.since then i`ve tried it many times but to no avail.now my exec has no signal.cant update the radio rom as well.plz can some one help.waitin for reply ......
Click to expand...
Click to collapse
i have the same problem....please help us!!
Your device, is it already unlocked to all networks?
SteedMo said:
Your device, is it already unlocked to all networks?
Click to expand...
Click to collapse
yes.....
now i foud it...
Have you tried to flash the Official ROM?
SteedMo said:
Have you tried to flash the Official ROM?
Click to expand...
Click to collapse
yes i have..
Try out "task 28 55aa", it will absolutely cleared out your OS.
Then you can try to flash the new rom you like.
http://forum.xda-developers.com/showthread.php?t=289325
SteedMo said:
Try out "task 28 55aa", it will absolutely cleared out your OS.
Then you can try to flash the new rom you like.
http://forum.xda-developers.com/showthread.php?t=289325
Click to expand...
Click to collapse
i did it....but the problem remains
Im sorry friend, i dont have further experience for this.
Maybe what happening here because of physical problem (there was component inside broken or nonfunctional part) could be due to water damage? dropped? or else?
But lets keep trying..
Anyone please HELP...
flaviopr said:
yes i have..
Click to expand...
Click to collapse
yes but while flashin it gives the country code error with original rom and when tryin with other roms it gives radio update error.if anyone can help...
County code error?
Read here http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
Is there HARD SPL for universal??
SteedMo said:
County code error?
Read here http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
Click to expand...
Click to collapse
when i use MaUpgradeUt_noID.exe,there is no country code error but then the error is 114 radio rom update error
flaviopr said:
i did it....but the problem remains
Click to expand...
Click to collapse
same here
Hi,
I tryed to upgrade to WM6 but I think I tit someting wrong, I flasht my
old WM5 back but now it is not possible to try flashing to WM6.
stuck in new 3.03.0000 bootloader.
I hope somebody can help me, thanks
Theo
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Come on guy, if you can write, i suppose that you can read HERE ...
racerx_ said:
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Click to expand...
Click to collapse
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
please state what the problem is when you try to flash
racerx_ said:
please state what the problem is when you try to flash
Click to expand...
Click to collapse
When I start to flash the sync. is oke but when the bootloader screen appears the flashing stops and the PDA is not connected anymore.
Try to launch again your update while you're in bootloader mode...It should work !!
shym said:
Try to launch again your update while you're in bootloader mode...It should work !!
Click to expand...
Click to collapse
I just did it but when my device is in bootloader mode there is now
connection with my notebook (VISTA) anymore. When I restart my
PDA the connection is established.
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
racerx_ said:
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
Click to expand...
Click to collapse
Yes I did already as you describe the result is still no connection (error).
hmm... i think you're gonna have to use Pof's splxploit to load hard-spl and then flash another ROM from there.
It's a question of whether SPL 3.03 is exploitable in the same way...
theovdb said:
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
Click to expand...
Click to collapse
you need to use the active sync after you load wm5 ... that's the trick..
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
banzro said:
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
Click to expand...
Click to collapse
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
theovdb said:
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
Click to expand...
Click to collapse
Hello,
Explain me the Problem a bit more cloaser (step by step what you are doing)
error messages, and also what image you had bevore on it, I need also to know which which version is written on the 3-colored screen...
Look forward to her from you...
stepw said:
It's a question of whether SPL 3.03 is exploitable in the same way...
Click to expand...
Click to collapse
the answer is yes, splxploit works in new bootloader too.
racerx_ said:
the answer is yes, splxploit works in new bootloader too.
Click to expand...
Click to collapse
the answer is no splxploit not works on SPL 3.03 on my device
So what did you do to fix this ??
shym said:
So what did you do to fix this ??
Click to expand...
Click to collapse
On this moment nothing, I did something wrong by flashing the first time
and now I am stuck in SPL 3.03. I think the best what I can do is waiting for
the official rom from HTC.
Hi All,
I am facing the dreaded 'No GSM' error and unable to flash radio rom problem.
tried to flash every possible rom including original O2 one. All failed on radio ram flash.
Went through various threads and there seems to be no solution yet for universal (though there seems to be a solution for Hermes).
So all, please help me if there is some light in the end of this tunnel
regards
Topgun
i have tried all the possible things but no luck so far.....
please help
I just bought a used XDA with this same problem. Thought if i flash it it would work... any suggestions on what I can do? i havent touched it yet. Thanks
has ANYONE been able to solve this problem?!!!! Pls what did u do step by step.... I spent so much money on this %&%$& Phone!!! pulllleeeessssss
I haven't had this problem, however it sounds like you phone may be SIM locked? If so, you will need to flash it with the native ROM from it;'s origin. If it is SIM and CID locked, it will only take the OEM signed ROM.
Quote from POF (Moderator)
"Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader."
If this is of any help. It is from a thread on CID Unlocking RUU for Uni
Thanks.
i have been through that thread.
well the question on that is 'Is hermflasher okay to flash Universal as well'?
Where is this thread? i can try it.... but cant find the thread on cid unlocking ruu for universal in mermes section....
raskell said:
I haven't had this problem, however it sounds like you phone may be SIM locked? If so, you will need to flash it with the native ROM from it;'s origin. If it is SIM and CID locked, it will only take the OEM signed ROM.
Quote from POF (Moderator)
"Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader."
If this is of any help. It is from a thread on CID Unlocking RUU for Uni
Click to expand...
Click to collapse
Here is the thread
http://forum.xda-developers.com/showthread.php?t=301662&highlight=radio+error
Let me know if you have any luck with this.
cheers
topgunarindam said:
http://forum.xda-developers.com/showthread.php?t=301662&highlight=radio+error
Let me know if you have any luck with this.
cheers
Click to expand...
Click to collapse
no, hermflasher wont work with universal (I dont think) ill consult with some others and report back here our consensus on what to try
I am facing the same 'No GSM' error in xda exec, plz can somebody tell me step by step how to solve it.
Thanks Midget
shall wait for your word.
Midget
topgunarindam said:
shall wait for your word.
Click to expand...
Click to collapse
I'm waiting too.
Good News at Last
atleast it worked for me.
flashed using a different pc with radio 1.18 and it worked.
the radio is working fine with laurentius26's WM6 rom.
atleast my brick comes live again.
LUCKY YOU!!!!!!!!
topgunarindam said:
atleast it worked for me.
flashed using a different pc with radio 1.18 and it worked.
the radio is working fine with laurentius26's WM6 rom.
atleast my brick comes live again.
Click to expand...
Click to collapse
lucky you, I tried that same WM6 ROM (with radio 1.18) and still same problem. I've tried falshing with 2 different desktops and a laptop. Still same problem! Topgun, did u have active sinc installed ? was the PC u used fresh? (no apps installed). do u think if i format my PC it could flash the radio? DID u flash radio only? or the whole laurentious v3 WM6 package (that is at the same time)?
Pls reply
Tbaba said:
lucky you, I tried that same WM6 ROM (with radio 1.18) and still same problem. I've tried falshing with 2 different desktops and a laptop. Still same problem! Topgun, did u have active sinc installed ? was the PC u used fresh? (no apps installed). do u think if i format my PC it could flash the radio? DID u flash radio only? or the whole laurentious v3 WM6 package (that is at the same time)?
Pls reply
Click to expand...
Click to collapse
Him
well it was a laptop dell to be precise.
it was never used for window mobile usage previously and hence fresh Active sync 4.5 was installed.
only radio rom 1st (using the RUU check bypassing)......
once succesful, then laurentiius rom was tried.
one more thing i had entered bootloader manually after disabling AS 4.5
i used the original USB cable as well
hope this helps....
suggest get hold of some friends "win mobile virgin" pc/laptop.
P.S>- i am not sure but this prob might be somewhat related to COM ports available on your machine.
Hello.
i'v downloaded the official rom from HTC site
whenever i try to Upgrade to this New ROM, i get an error messege, "Upgrade ROM Code Error", just after it reached to 100% of the upgrade... the Diamond enter to boot loader and stay there.
i tried and installed a previous ROM Version, and it successes with no problem.
i even tried replacing the HardSPL, now with OliNex Unsigned.
any idea ?
the same problem, the same question !
ariebk said:
Hello.
i'v downloaded the official rom from HTC site
whenever i try to Upgrade to this New ROM, i get an error messege, "Upgrade ROM Code Error", just after it reached to 100% of the upgrade... the Diamond enter to boot loader and stay there.
i tried and installed a previous ROM Version, and it successes with no problem.
i even tried replacing the HardSPL, now with OliNex Unsigned.
any idea ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=472184
u 'll get the answer here. ( may be updating from internal storage should help.)
chinmay007 said:
http://forum.xda-developers.com/showthread.php?t=472184
u 'll get the answer here. ( may be updating from internal storage should help.)
Click to expand...
Click to collapse
Thanks, trying.
Thanks!!
Working!!!
Moirror ?
Hi
anyone can upload for us to avoid the registration to HTC ?
Thanks
i flash this rom in my diamond,is prefrect,but i cant use the connection setup in china, is say no databasic in connection setup. someone can post a htc connection setup for diamond for me and make sure support chinamoblie.thx
I've read all posts on the issue because it seems to be a common one , here's the story, I received this phone from a friend already bricked , what happens wen I try turnin it on it just stuck in booting
I can't hard reset
I can't flash, I either get invalid vendor I'd or model Id. Or curropt file ,
I already kno its not cid unlocked and apparently no form of unlocking was done to it ,
But in its current state what can be done , because I've tried everything already within my knowledge
One other issue is I don't kno what is the stock rom for it so I can't flash without getting invalid vendor I'd , it unbranded and just says htc ,
Exca100
That's what's written on d back
What can be done ???
Thx in advance
Anybody ? I know its a simple fix , I just wanna know what can be done
all i can think of is download the htc ROM (in the official roms sticky)since its an unbranded phone and hold camera while powering on and flash. sorry I cant be much help in this area, just and idea I dont know if you tried it yet.
I did try all htc roms and it says invalid vendor I'd or incorrect model
That's why I can go any further
Hope this links helps:
http://forum.xda-developers.com/showthread.php?t=397583
And:
http://forum.xda-developers.com/showthread.php?t=415225
Good luck,
orb3000 said:
Hope this links helps:
http://forum.xda-developers.com/showthread.php?t=397583
And:
http://forum.xda-developers.com/showthread.php?t=415225
Good luck,
Click to expand...
Click to collapse
NONE a these linx helped
i have the same problem when flash to energy rom, it just stucks at booting screen and i cant do nothing about it, i cant connect to usb, what should i do ???
alexalexoe said:
i have the same problem when flash to energy rom, it just stucks at booting screen and i cant do nothing about it, i cant connect to usb, what should i do ???
Click to expand...
Click to collapse
Did you CID unlocked your device before? If so, try an original rom from the sticky posted in the first page.
it wasnt
but its offficial now i tried all the roms there
none works
Then CID unlock it now. . .That's the problem for why you cant use any other ROMs.
~~Tito~~ said:
Then CID unlock it now. . .That's the problem for why you cant use any other ROMs.
Click to expand...
Click to collapse
there is still no way to cid it because i cant in the stock rom for it
it keeps telling me invalid vendor id or model id
the sn number is
sz750fj04212 xe
can that help
Try messing with this.
~~Tito~~ said:
Try messing with this.
Click to expand...
Click to collapse
wont work
flashing spl gives invalid vendor id
OMG, I think my phone is bricked 4ever, this is hopeless ...
duplicate, sorry
dtgo said:
wont work
flashing spl gives invalid vendor id
Click to expand...
Click to collapse
My recommendation is that you contact your carrier and see if they can flash it to an original rom. HTC also can provide you a solution and hopefuly they can give you the original rom of your excalibur.
Good Luck,
Makes no sense because in jamaica they don't do repairs like that here especially if it wasn't bought from them
is it a dead case ?
dtgo said:
Makes no sense because in jamaica they don't do repairs like that here especially if it wasn't bought from them
is it a dead case ?
Click to expand...
Click to collapse
It's not a dead case, if you can get it to bootloader your S621 is not dead try again to flash in different PC's and see what happens. See this thread it may be helpful http://forum.xda-developers.com/showthread.php?t=534725 because it definitely gives you hope.
Try this:
* Shut Down the device
* hold down the camera button located to the right of the space bar for like 10 seconds,
* while still holding it down plug the USB in and you should see the menu come up with three colors.
* This is where you load your original ROM and can connect with ur PC .......
* perform Install the OLD ROM (After Installation page seems to be stuckon T-Mobile Logo but give it 1-2 Minuts and it will switch to Cold Boot Device configuration)
* make sure @ll is ok : then Reboot
* Install the Updated one from NRG