Hi All,
I am facing the dreaded 'No GSM' error and unable to flash radio rom problem.
tried to flash every possible rom including original O2 one. All failed on radio ram flash.
Went through various threads and there seems to be no solution yet for universal (though there seems to be a solution for Hermes).
So all, please help me if there is some light in the end of this tunnel
regards
Topgun
i have tried all the possible things but no luck so far.....
please help
I just bought a used XDA with this same problem. Thought if i flash it it would work... any suggestions on what I can do? i havent touched it yet. Thanks
has ANYONE been able to solve this problem?!!!! Pls what did u do step by step.... I spent so much money on this %&%$& Phone!!! pulllleeeessssss
I haven't had this problem, however it sounds like you phone may be SIM locked? If so, you will need to flash it with the native ROM from it;'s origin. If it is SIM and CID locked, it will only take the OEM signed ROM.
Quote from POF (Moderator)
"Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader."
If this is of any help. It is from a thread on CID Unlocking RUU for Uni
Thanks.
i have been through that thread.
well the question on that is 'Is hermflasher okay to flash Universal as well'?
Where is this thread? i can try it.... but cant find the thread on cid unlocking ruu for universal in mermes section....
raskell said:
I haven't had this problem, however it sounds like you phone may be SIM locked? If so, you will need to flash it with the native ROM from it;'s origin. If it is SIM and CID locked, it will only take the OEM signed ROM.
Quote from POF (Moderator)
"Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader."
If this is of any help. It is from a thread on CID Unlocking RUU for Uni
Click to expand...
Click to collapse
Here is the thread
http://forum.xda-developers.com/showthread.php?t=301662&highlight=radio+error
Let me know if you have any luck with this.
cheers
topgunarindam said:
http://forum.xda-developers.com/showthread.php?t=301662&highlight=radio+error
Let me know if you have any luck with this.
cheers
Click to expand...
Click to collapse
no, hermflasher wont work with universal (I dont think) ill consult with some others and report back here our consensus on what to try
I am facing the same 'No GSM' error in xda exec, plz can somebody tell me step by step how to solve it.
Thanks Midget
shall wait for your word.
Midget
topgunarindam said:
shall wait for your word.
Click to expand...
Click to collapse
I'm waiting too.
Good News at Last
atleast it worked for me.
flashed using a different pc with radio 1.18 and it worked.
the radio is working fine with laurentius26's WM6 rom.
atleast my brick comes live again.
LUCKY YOU!!!!!!!!
topgunarindam said:
atleast it worked for me.
flashed using a different pc with radio 1.18 and it worked.
the radio is working fine with laurentius26's WM6 rom.
atleast my brick comes live again.
Click to expand...
Click to collapse
lucky you, I tried that same WM6 ROM (with radio 1.18) and still same problem. I've tried falshing with 2 different desktops and a laptop. Still same problem! Topgun, did u have active sinc installed ? was the PC u used fresh? (no apps installed). do u think if i format my PC it could flash the radio? DID u flash radio only? or the whole laurentious v3 WM6 package (that is at the same time)?
Pls reply
Tbaba said:
lucky you, I tried that same WM6 ROM (with radio 1.18) and still same problem. I've tried falshing with 2 different desktops and a laptop. Still same problem! Topgun, did u have active sinc installed ? was the PC u used fresh? (no apps installed). do u think if i format my PC it could flash the radio? DID u flash radio only? or the whole laurentious v3 WM6 package (that is at the same time)?
Pls reply
Click to expand...
Click to collapse
Him
well it was a laptop dell to be precise.
it was never used for window mobile usage previously and hence fresh Active sync 4.5 was installed.
only radio rom 1st (using the RUU check bypassing)......
once succesful, then laurentiius rom was tried.
one more thing i had entered bootloader manually after disabling AS 4.5
i used the original USB cable as well
hope this helps....
suggest get hold of some friends "win mobile virgin" pc/laptop.
P.S>- i am not sure but this prob might be somewhat related to COM ports available on your machine.
Related
Hi All,
When i tried flashing my rom and upgrade to wm6, with uspl, i get error 270 - "The image file is corrupted. Please check your update utility".
I have O2- Xda Orbit...
Any suggestions ??
http://forum.xda-developers.com/showthread.php?t=311650&highlight=idiot
I dont see the asnwer....
can you please be more specific ? I reviewed all the pages..
Thanks
http://forum.xda-developers.com/showthread.php?t=313486
To be honest I am fairly busy right now so I just posted the links for quick reference, Are you using Vista, I will assume so because thsi is a known issue with this OS. If so
refer here
http://forum.xda-developers.com/showthread.php?t=312052&highlight=vista+drivers
For future reference, The best thing to do when asking for specific help is to give as much info as possible, just trying to help.
I hope this puts you on the right path, it took me HOUR AND HOURS of reading so I totaly understand where your at, good luck
To get rid of this error try using another PC. It fixed things for me.
I dont have...
Vista, but i will try to do it on my laptop...lets see if it works..
It doesnt work...
I tried a different pc, and both working with XP....any ideas anyone how to olve this error?
many thanks
igal said:
I tried a different pc, and both working with XP....any ideas anyone how to olve this error?
many thanks
Click to expand...
Click to collapse
did you first run the uspl program from POF because i think your device is CID locked
I'm using
USPL by POF...is there a way to check if my device is cid locked ?
igal said:
USPL by POF...is there a way to check if my device is cid locked ?
Click to expand...
Click to collapse
the most devices are cid locked. If you use this program before every rom flash your device is cid unlocked until you give your device a hard reset. Just read the manual that i had post along the USPL file
If im able...
To swap between carriers ( Orange, O2, and etc...) does it mean its unlocked ??
Thanks
nope there is a sim lock and a CID lock on the device the things are not the same. Sim Lock is for your provider. CID lock is on the phone so you can't flash other roms to the device than the rom of your first provider that gave you the device.
I was also trying lots of things and suddenly it worked. Important is that when it looks like the device freezes/shuts down, that you don't reset or anything, just leave it and Just unplug the cable, reconnect and after that try the romupdate.exe again... It should work...
Can anyone tell me how do i..
CID unlock it ?? I tried one of the soft's here, it doesnt seem to work ( or atleast i dont know...).
Anyone ??
Hi,
I flashed the SPL with 1.56.OliNex but i got a ERROR [270] UPDATE ERROR - The image file is corrupted. please check your update utility.
on my bootloader screen: Upgrade ROM code error Please try again
ayingha said:
Hi,
I flashed the SPL with 1.56.OliNex but i got a ERROR [270] UPDATE ERROR - The image file is corrupted. please check your update utility.
on my bootloader screen: Upgrade ROM code error Please try again
Click to expand...
Click to collapse
its ok now i redownloaded the files and everythings be ok!
Hi,
I read several posts, but without real solutions. Maybe someone can help us all.
Dutch people with an Artemis that is stuck at the first splash-screen need the original dutch HTC Rom. It doesn't exist as far we can find. It's not a t-mobile or something, just not branded. If anyone has a WM5 original dutch we would be glad also.
The problem is we want to flash with USPL to other WWE rom, we can get into bootloader mode without problem. It get stuck at 3% when trying to flash rom.
When running USPL it asks to copy the same files again several times, with error messages 'device not connected' and then gets stuck at 50..... with 2 error messages, cannot copy cmd.exe.
My question is : does anyone know the real solution or has original HTC rom?
Thanks !!!!!
Innovator
I have a dutch HTCP3300. Trick is to 1st give a hard reset, and remove the microSD card. Then connect via activesync as a guest (no new partnership). When connected, use startuspl.exe.
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Works like a charm, but have no dutch language anymore. For that you will have 2 wait till september (i guess) or be lucky its any sooner.
Hangs at 50... when running USPL when bricked
Hi,
Thanks for the reply. Gave it a hard reset & removed SD card. Please note I cannot connect to activesync when phone bricked, so cannot chose any partnerships nor guests. I only hear a sound that usb is connected.
Do I have to use start_uspl while the stuck splashscreen is on, or in bootloader mode? I think it makes no difference, cause before when using start_uspl and phone was working, it got automatically in bootloader mode.
When starting startuspl.exe it says NO DEVICE CONNECTED! it first asks to copy again same files (several times) - i have to say no cause it keeps asking hunderds of times, and then I get at 30 and 40% : can't spawn 'cmd.exe'.... no such file or directory as start_uspl.exe and it hangs at 50....
I know how to flash, had B&B4.0 first before i got stuck, so i have to get into uspl with a bricked phone, anoter interesting thing for all users in this forum.
I saw in Trinity forum the guy 'Pof' made an 'unbrick' tool, would be nice for Artemis users also (and no 6 weeks waiting for repair service)
Thanks for any new help!
Innovator
Twiggerdingo said:
I have a dutch HTCP3300. Trick is to 1st give a hard reset, and remove the microSD card. Then connect via activesync as a guest (no new partnership). When connected, use startuspl.exe.
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Works like a charm, but have no dutch language anymore. For that you will have 2 wait till september (i guess) or be lucky its any sooner.
Click to expand...
Click to collapse
Twiggerdingo said:
I
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Click to expand...
Click to collapse
i agree 100%.
search for "P800w_SEA_ENG_WM6_Upgrade_20070713"
and
customize to your liking using the b&b apps to be found in all the posts and look for "palestrini" with most cabs.
greetz
Tried this already?
http://forum.xda-developers.com/archive/index.php/t-312495.html
Or just flashing the new WWE WM6 rom? Or tried flashing it via an empty microsd?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Good luck!
Bricked P3300 in splash / .nbh replacement or SD flash not working with CID lock
Hi,
Thanks, but no luck.
1> I tried the German rom (not the one for the orbit) and replaced the .nbh with the B&B4.0 & renamed, also with the HTC official and P800W Sea, but all 3 hang at 3%
2> My device isn't CID-unlocked (no supercid device) so through SD card it says 'Invalid certificate' or just nothing. I tried the HTC Official WWE, B&B 4.0, P800W SEA, renamed all 3 to ARTEIMG.nbh but no luck (due to cid locked i guess). Maybe I will do it when waranty is over. Hate to send it in to wait for 6 weeks.
If HTC repair service can do it, why wouldn't anyone from the xda developpers site cannot fix a bricked p3300? Or is the only method that i have the original dutch HTC rom (not branded) which isn't out.
Thanks if anyone can solve this problem!!!
Innovator
Twiggerdingo said:
Tried this already?
http://forum.xda-developers.com/archive/index.php/t-312495.html
Or just flashing the new WWE WM6 rom? Or tried flashing it via an empty microsd?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Good luck!
Click to expand...
Click to collapse
Wat numbers do you see in the colored screen? Ie Ispl?
look here: http://forum.xda-developers.com/showthread.php?t=312871
if you know someone with a working dutch artemis, you can make a rom backup out of it and flash it to your device.
ok, i know its not the easy way, but at least it seems to work.
Backuped up Dutch Rom please
Hi Twiggerdingo,
The numbers are :
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
OS 3.4.0.0
B&B4.0 was flashed with uspl from the original WM5 Dutch rom. B&B Worked perfect, but everything went wrong when flashing ARTE_NLD_WM6_RvBCrS. It was an .nb file, converted it to .nbh (cause always hangs with bat file) but no luck. It seems that it always goes wrong with a .bat file and a OS.NB file. Never been stuck with an upgrade.exe and an .NBH file.
Hope I can fix it this week instead of sending in for repair and 6 weeks waiting... If anone has the dutch original rom (or can make a .nbh backup) ?
There is also a htc rom tool version 1.0.1 (rombuilder by dark simpson) i saw on this forum. You can select a rom, choose country id, language, ...
I wonder if I could change the country id,... to the same as my dutch rom, so that it would flash, but can't remember the country id the other data.
Thanks for any help!!
Twiggerdingo said:
Wat numbers do you see in the colored screen? Ie Ispl?
Click to expand...
Click to collapse
maby stupid from my side.
are you running XP or Vista??
Unbrick P3300 with Vista
Hi,
I'm running vista, but I can't see the problem, cause i flashed many roms without problems to B&B 4.0,...
What does Vista witheld that XP can with a bricked phone ?
Tomorrow my friend comes with his XP laptop, will this make a difference you think?
Thanks!
Marcus_de_zwarte said:
maby stupid from my side.
are you running XP or Vista??
Click to expand...
Click to collapse
1.12.404.1.nld
The only rom that can unbrick my device would be the original rom i guess, it would be the 1.12.404.1.NLD (9/12/06). Anyone can help me to find this one? Not on HTC site, no support at all.
Hi Innovator,
Vista seems to give some problems for some people when they are trying to flash their rom. its reported in several other threads. Mayby XP can help you, although when it HAS worked for you, i think the chances are small.
My GUESS is that you have to reflash your current rom somehow, so the last terrible rom youve mentioned. (dont know that 1...).
So this 1:
ARTE_NLD_WM6_RvBCrS
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
Afterwards use uspl. And then u can continue for another 1. At this point i dont think a original Dutch Rom can help you out.
upgraderom.bat = no device connected
Hi,
I will try tomorrow with XP, the problem is that ARTE_NLD_WM6_RvBCrS rom is an OS.nb file with an upgraderom.bat file.
When i try to upgrade rom with this batfile & .nb it says copy files again? with device not connected remark. This is the same as when trying to run USPL, so i think to flash like this you need a working phone. For USPL it needs windows CE to work and the same error.
How can I easily convert this os.nb to os.nbf ? I tried some tools but had to fill in a lot of stuff (didn't know what).
I like more flashing with upgrade.exe tool & .nbf files, no problems at all.
Thanks
Twiggerdingo said:
Hi Innovator,
Vista seems to give some problems for some people when they are trying to flash their rom. its reported in several other threads. Mayby XP can help you, although when it HAS worked for you, i think the chances are small.
My GUESS is that you have to reflash your current rom somehow, so the last terrible rom youve mentioned. (dont know that 1...).
So this 1:
ARTE_NLD_WM6_RvBCrS
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
Afterwards use uspl. And then u can continue for another 1. At this point i dont think a original Dutch Rom can help you out.
Click to expand...
Click to collapse
Hey, any luck on the XP-laptop?
Found this:
http://tools.ramonshare.com/?p=3
Look who posted it, the maker of your faulty rom!
also, maybe a bit more worrying:
http://forum.xda-developers.com/showthread.php?p=1269267
Sounds familiar?
RvBCrS Guy & rom-flashing
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Twiggerdingo said:
Hey, any luck on the XP-laptop?
Found this:
http://tools.ramonshare.com/?p=3
Look who posted it, the maker of your faulty rom!
also, maybe a bit more worrying:
http://forum.xda-developers.com/showthread.php?p=1269267
Sounds familiar?
Click to expand...
Click to collapse
Innovator said:
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Click to expand...
Click to collapse
did you try and use the "mitty routine"
or can you get it recognized by windows ? the reason i ask this is because i do have a back up image from WM5 NL (Tmobile)
let me know how i can help you.
neilhhardy said:
the reason i ask this is because i do have a back up image from WM5 NL (Tmobile)
let me know how i can help you.
Click to expand...
Click to collapse
do you have also a copy of wm5 nl for me ?
i want to back flash it but i don't have wm5 nl rom .
thanx daffy
Innovator said:
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Click to expand...
Click to collapse
try here and let me know how your doing.
http://eazyvg.wordpress.com/2007/05/23/running-wm6-on-htc-p3300-cid-locked/
Cannot flash with upgradeartemis.bat file in dos
Hi,
I'm really sorry but I cannot flash through a .bat file in dos, it asks always to copy the same files again, you have to take no cause it keeps asking hundred times (device not connected also mentionned)
Then you have to wait 12-20 min (if it hangs 30min mentionned) but it stays on the bootloader screen, nothing happens.
I can only flash with .nbh from storage card
or with upgraderom.exe (in windows).
Only from bootloader mode, cannot get into activesync also.
Best regards,
Innovator
PLZ help me, while trying to upgrade my HERM I lost the Radio, there is a message (No GSM) appearing during the boot.
I've tried many unofficial ROMs, but still getting the same message!!!
And when I tried to use the official ROM, the upgrade stopped on 11%!!??
To solve the hangup problem, I used unofficial ROM again, and after the upgrade I found the same GSM problem again.
FirasKB said:
PLZ help me, while trying to upgrade my HERM I lost the Radio, there is a message (No GSM) appearing during the boot.
I've tried many unofficial ROMs, but still getting the same message!!!
And when I tried to use the official ROM, the upgrade stopped on 11%!!??
To solve the hangup problem, I used unofficial ROM again, and after the upgrade I found the same GSM problem again.
Click to expand...
Click to collapse
What "official" ROM? You've given absolutely NO info regarding anything friend...
Myself, I'd click the green link in my signature... but that's me
My problem is clear, there is No GSM in my HERM, I've tried WM 5, WM 6 and WM 6.1, but no way, I couldn't success??!!
Kindly, advice if you have any solution or ask for a specific info.
FirasKB said:
My problem is clear, there is No GSM in my HERM, I've tried WM 5, WM 6 and WM 6.1, but no way, I couldn't success??!!
Kindly, advice if you have any solution or ask for a specific info.
Click to expand...
Click to collapse
Yes your problem is clear, you have no GSM. I don't know where you hail from, which exact PDA you have, your provider, what ROM you last used before this happened, etc..
Dr Puttingham said:
Yes your problem is clear, you have no GSM. I don't know where you hail from, which exact PDA you have, your provider, what ROM you last used before this happened, etc..
Click to expand...
Click to collapse
Fine,,,
Device: at&t 8525
ROM: Original WM5 ROM, and while trying to upgrade it my device hanged up on the colored screen. To fix that, I've installed schap's 4.31 WM6 ROM using the MicroSD Card (HERMIMG). Now the device can boot but with No GSM at all (even there's no information about the GSM under Device Info).
The device now can accept any modified ROM (like schap's, faria, etc...) but unable to accept the official (original) ROMs. When I try to install any official ROM the upgrade process will stack on 11% every time.
So, the device still having no GSM.
Thank You....
FirasKB,
Most roms on her DO NOT come with a radio included. Usually only the manufacturer roms do.
There are 2 things you need to do:
- Consult the MrVanx guides which will help you understand what you are doing (google search for this).
- go to the wiki in this forum and search for a radio rom to upload.
In summary, reflash, say, Scahps rom then flash a radio rom from the wiki (I suggest radio 1.47, which is pretty reliable).
Hope this helps.
WB
FirasKB said:
Fine,,,
Device: at&t 8525
ROM: Original WM5 ROM, and while trying to upgrade it my device hanged up on the colored screen. To fix that, I've installed schap's 4.31 WM6 ROM using the MicroSD Card (HERMIMG). Now the device can boot but with No GSM at all (even there's no information about the GSM under Device Info).
The device now can accept any modified ROM (like schap's, faria, etc...) but unable to accept the official (original) ROMs. When I try to install any official ROM the upgrade process will stack on 11% every time.
So, the device still having no GSM.
Thank You....
Click to expand...
Click to collapse
Ahhh, a little info.
First download the official AT&T 3.62 ROM which includes the 1.54.07.00 radio.
Reboot the pc with the PDA disconnected.
(Oh, make sure that you have ActiveSync 4.5 insttalled of course)
Put the device into bootloader mode (hold power and OK button while pressing reset with stylus, nice tri color screen will appear)
Connect the PDA to the USB cable and run the RUU_Inside.exe file.
wacky.banana is correct, most chef's don't include a radio. You've got a corrupted ROM (due to the incomplete flash) The RUU_Inside.exe will typically talk directly to the hardware when nothing else can and fix. I've personally recovered around 10 or so 8525's that I've "bricked" with bad flashes and then repaired with this method.
I can't guarantee that this will work but it IS your best shot friend.
Good luck!
Dr Puttingham said:
Ahhh, a little info.
First download the official AT&T 3.62 ROM which includes the 1.54.07.00 radio.
Reboot the pc with the PDA disconnected.
(Oh, make sure that you have ActiveSync 4.5 insttalled of course)
Put the device into bootloader mode (hold power and OK button while pressing reset with stylus, nice tri color screen will appear)
Connect the PDA to the USB cable and run the RUU_Inside.exe file.
wacky.banana is correct, most chef's don't include a radio. You've got a corrupted ROM (due to the incomplete flash) The RUU_Inside.exe will typically talk directly to the hardware when nothing else can and fix. I've personally recovered around 10 or so 8525's that I've "bricked" with bad flashes and then repaired with this method.
I can't guarantee that this will work but it IS your best shot friend.
Good luck!
Click to expand...
Click to collapse
Thanks to your support friends,,
I've done as you mentioned, but the upgrade process stopped on 11% again and couldn't complete!!?? (the message ERROR [262]: UPDATE ERROR appeared on my P.C)!!??
Kindly, advice...
I can't remeber what error 262 is about; however is your device unlocked? If it is not then you need to address that issue first (its in the wiki)
Secondly have you installed hard spl to your device BEFORE attempting to upgrade your rom? If the answer to this question is no then that will confirm that you have not read up on this before jumping in, which is hugely dangerous.
WB
Stuck.... completely stuck
My fiances phone is stuck in the tri color bootloader screen. I am in the US and i have tried everything from flashing the original RUU to a hard reset and everthing, but nothing seems to work. the IPL is 4. 10. 0002 and the SPL is 4. 10. 0000. Can someone please help me. I know there has to be a way to fix this.
I had the same problem. After trying to fix it myself for about a week I gave up and sent it to AT&T Repair center. Got it back functional.
I haven't tried the Himalaya ROM method, though.
Check this thread:
http://forum.xda-developers.com/showthread.php?t=372895
Good luck!
wacky.banana said:
I can't remeber what error 262 is about; however is your device unlocked? If it is not then you need to address that issue first (its in the wiki)
Secondly have you installed hard spl to your device BEFORE attempting to upgrade your rom? If the answer to this question is no then that will confirm that you have not read up on this before jumping in, which is hugely dangerous.
WB
Click to expand...
Click to collapse
Thanks again to your support,
The problem happened when I tried to unlock the device to upgrade it (it was fine befor), I don't know whether it was already locked or not, but usualy when I buy any Pocket P.C I'm preparing to unlock it first (I've done that many times on HERMES before, but this is the first time I'm facing such problem!!). So, while unlocking the device it's stucked on the tri color screen.
I've done many things after that to solve the problem (updating the hard SPL to v2.10 successfully, flashing many ROMs -not including Radio- successfully).
So, I can flash any ROM now but it must be without Radio, otherwise the flashing process will stuck on 11%.
try reading the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
More than 2 days and I couldn't success to bring the Radio back??!! I think I've really lost my device.
FirasKB,
What steps exactly have you taken to solve the problem? Try and outline them here; that will help people on here to identify what else you need to do to bring the device back to life.
WB
FirasKB said:
More than 2 days and I couldn't success to bring the Radio back??!! I think I've really lost my device.
Click to expand...
Click to collapse
Schap´s Rom has NO Radio. Flash this one BUT u must have HardSPL
http://forum.xda-developers.com/showthread.php?t=348435&highlight=Radio
wacky.banana said:
FirasKB,
What steps exactly have you taken to solve the problem? Try and outline them here; that will help people on here to identify what else you need to do to bring the device back to life.
WB
Click to expand...
Click to collapse
wacky.banana,
As I wrote above, my problem still not solved and my device still running with (No GSM).
I've done the following:
- Updating the ROM (O.S only as the device not accepting any Radio ROM)
- Updating the SPL to Version 7.
- Trying to update the radio (separately) but I didn't success??!!
It seems there is no solution to fix this problem???!!!
Abo Forat said:
Schap´s Rom has NO Radio. Flash this one BUT u must have HardSPL
http://forum.xda-developers.com/showthread.php?t=348435&highlight=Radio
Click to expand...
Click to collapse
No way, I tried it but my device can't accept any Radio version.
FirasKB said:
wacky.banana,
As I wrote above, my problem still not solved and my device still running with (No GSM).
I've done the following:
- Updating the ROM (O.S only as the device not accepting any Radio ROM)
- Updating the SPL to Version 7.
- Trying to update the radio (separately) but I didn't success??!!
It seems there is no solution to fix this problem???!!!
Click to expand...
Click to collapse
Frisk,
Read this thread and try the solutions metioned in it. It tells you what error 262 is all about....http://forum.xda-developers.com/archive/index.php/t-298516.html
Cheers
WB
wacky.banana said:
Frisk,
Read this thread and try the solutions metioned in it. It tells you what error 262 is all about....http://forum.xda-developers.com/archive/index.php/t-298516.html
Cheers
WB
Click to expand...
Click to collapse
Unfortunately, but that's also didn't help, because the main problem now is how to install the Radio on the device??!!
The device is not accepting the Radio installation at all, NO WAY....
Can anyone show how to flash through SD card my Blue Angel please...from wm03 to wm06? I was searching on wiki but there says nothignn about SD CARD... Can anyone simply show me how to do that? Which ROM to install and that stuff... MANY THANKS
never heard before flashing BA from SD,
Sorry...
i dont have cabel for connecting with PC :-(... and here i Serbia i cant buy a new one so i will never install WM06 :-(... Any HELP
At this point, your only options are:
find a cable if you want to flash the phone
send it to someone who has a cable so they can flash it for you and send it back
Hard reset
In case you have a preproduction HERMES and you can not update the ROM (due to the fact that your bootloader is <1.04) here the very easy solution:
***info removed, wrong device or mis-informed***
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
gully321 said:
In case you have a preproduction HERMES and you can not update the ROM (due to the fact that your bootloader is <1.04) here the very easy solution:
***info removed, wrong device or mis-informed***
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
Click to expand...
Click to collapse
man, you really misposted this......this is for hermes,, should'nt work at all on blueangel
hfzarx said:
man, you really misposted this......this is for hermes,, should'nt work at all on blueangel
Click to expand...
Click to collapse
This thread was back in 2008...was there any real need to reply to a 2 year old thread...probably not?
For those of you who have NO GSM on boot (and I know there are a few). The solution could've been posted some time ago, but might be too far back or lost.
I received a board with locked GSM, showing NO GSM on boot. Every radio flash failed, as well as MTTY and factory ROM attempts. Error 114 and Country ID errors prevent proper flashing of any radio.
Here is what got my GSM sorted - I flashed radio through CID by-pass by inserting the necessary .nbf into flashing facility and managed to flash the radio. On a first boot it will show NO GSM, so will seem like the problem is still there. However, I removed the battery overnight and in the morning the flashed radio showed on the boot screen, the Uni booted as usual and is working as it should.
Thanks enigma
I´ll post this on the FAQ
Cheers,
enigma1nz said:
For those of you who have NO GSM on boot (and I know there are a few). The solution could've been posted some time ago, but might be too far back or lost.
Click to expand...
Click to collapse
thanx dear for the expert advice..LOL.it's grat to have techxpert.
I'll try with ma Uni ^ ^
Thank you
rajivshahi said:
thanx dear for the expert advice..LOL.it's grat to have techxpert.
Click to expand...
Click to collapse
Not sure why you LOL, but the solution worked for me and I hope it will work for others. I now have a JasJar with Radio 1.18, instead of No GSM on boot and no valid solution offered to everyone with the same problem.
it dosen't work I try it but nothing what can I do