I tried to update my rom...now it gets to the windows mobile screen and hangs.. I can get it into bootloader screen.. The problem is i cant find an original rom to go back to.. my info was..
dopod p800w
rom 129.706.11chs
11/07/07
02.84.90
4.1.12.38
ext rom 1.29.706.111
Now in bootloader it says IPL 129.0001
SPL1.11.0000
usb will show up but not the thing in the upper right corner..?
Im a newbe and decided to jump in after seeing all the good luck that everyone has had..
Can anyone help..
new info..
I can get to bootloader screen hook up the usb and even synk with active synk 4.5 but as soon as i try the start uspl or the ruu my phone disconnects.
This is starting to drive my wife nuts ive been on the comp 4 about 18hrs in two days trying to figure this out...
should i just send it in to htc and have it reflashed???
Any ideas???
Found this for Dopod P800W
http://rapidshare.com/files/42891918/P800w_SEA_ENG_WM6_Upgrade_20070713.zip, if it has pass i think it is kastibong
Don´t know if it will help you.
Thanks ark 666,
If i have heard right i need to flash back to the chinese (chs)
then once im back to original i need to iemei unlock then i could use the rom in the link that you provided..Am i right??
thank you for taking the time to respond to me, I know you guys are well beyond us newbes and it can drive you nuts with the same old questions....
some of us really do appreciate it.
crazy4chevs said:
Thanks ark 666,
If i have heard right i need to flash back to the chinese (chs)
then once im back to original i need to iemei unlock then i could use the rom in the link that you provided..Am i right??
thank you for taking the time to respond to me, I know you guys are well beyond us newbes and it can drive you nuts with the same old questions....
some of us really do appreciate it.
Click to expand...
Click to collapse
Try this wwe rom, is for the same region as your device, with cht support, if this doesn´t work then wi´ll try to arrange the Chinese one.
Cheers.
Man, I thought i had it.. It finally went to the ruu on the boot loader screen started to update and got to 2%....
This is what it said
ERROR (244) : INVALID MODEL ID
This update utility cannot be used on your PDA phone. Please check your update utility click to exit..
DPRRH<68-ASVH55670-DPRRH568-ASVH5/01*
at least i got to see the ruu on the corner of the phone this time.
Any ideas what to do now?
I arranged this rom "P800_CHT_3.7.709.1 chs cust", i think it´s this one, it´s the most recent, , for p800w.
Though this one is CHT, CHS customized.
akk666,
Do you have a link for the rom in the last post?
maybe i could pm you so this post dosnt get to long..?
What do you think of this.....
szlcdn_p800_wm6_chs_1023.nbh
found it from here...
http://translate.google.com/transla....9966.org&hl=en&rls=RNWO,RNWO:2008-20,RNWO:en
what do you think??
Try it, maybe it´ll work.
http://www.4shared.com/file/111733762/5c488ad0/P800_CHT_377091_OS_CHSCust09.html
Havent quite figured out how to change out the nbh in the ruu to get either of those to load like complete ruu..
Is there a program that makes this more idiot proof to change the nbh?? That would be nice.
Type nbh in.. it takes you right to it highlighted, then it has you copy your new one and paste in a command line then asks if you want to replace it..
Man thats what sucks abt being a newbie is that it takes sooo long to figure things out 3hr 20 min and still at square one..
lots of links though
crazy4chevs said:
Havent quite figured out how to change out the nbh in the ruu to get either of those to load like complete ruu..
Is there a program that makes this more idiot proof to change the nbh?? That would be nice.
Type nbh in.. it takes you right to it highlighted, then it has you copy your new one and paste in a command line then asks if you want to replace it..
Man thats what sucks abt being a newbie is that it takes sooo long to figure things out 3hr 20 min and still at square one..
lots of links though
Click to expand...
Click to collapse
U could write it in chinese, that i would´ve understood the same.
Nothing.
Related
I very much want to upgrade my O2 Orbit Rom to either WM6 or the B&B developed by Tom. Right now it apparently does not have the UK WM5 on it; according to the Ebay seller I bought it from I would have to go to the Hong Kong site to get an "official update" but the seller claims it would be better not to do so as people are reporting losing their radio and bluetooth. So I have read and re-read through these threads. I hear stories of phones not working after being flashed so I want to be super cautious. Here is what I think I do:
1. Run USPL and wait 5 - 10 minutes until the computer reboots itself.
2. Run either RUU for Tom's B&B or run RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
for the UK WM6 upgrade.
And I should be upgraded, right?
If I end up with huge problems, I think I can revert back to the original factory ROM with the file called:
Arteimg.nbh
But how do I run a nbh file?
Which OS is least likely to cause problems?
Please be gentle with me - I'm a 51 year old woman who is in love with my Orbit and can't live without it so I don't want to take any chances to turn it into a brick. On the other hand, I'd really like to have WM6 and can't get it from the UK d/l site because my S/N matches the Hong Kong site. I live in the US and I'm not sure if I want a Hong Kong OS. I have honestly read through these forums and tried to get all my answers here .... but I just want to double check before I make a big mistake and blow up my phone. Thank you all.
Cinamon said:
I very much want to upgrade my O2 Orbit Rom to either WM6 or the B&B developed by Tom. Right now it apparently does not have the UK WM5 on it; according to the Ebay seller I bought it from I would have to go to the Hong Kong site to get an "official update" but the seller claims it would be better not to do so as people are reporting losing their radio and bluetooth. So I have read and re-read through these threads. I hear stories of phones not working after being flashed so I want to be super cautious. Here is what I think I do:
1. Run USPL and wait 5 - 10 minutes until the computer reboots itself.
2. Run either RUU for Tom's B&B or run RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
for the UK WM6 upgrade.
And I should be upgraded, right?
If I end up with huge problems, I think I can revert back to the original factory ROM with the file called:
Arteimg.nbh
But how do I run a nbh file?
Which OS is least likely to cause problems?
Please be gentle with me - I'm a 51 year old woman who is in love with my Orbit and can't live without it so I don't want to take any chances to turn it into a brick. On the other hand, I'd really like to have WM6 and can't get it from the UK d/l site because my S/N matches the Hong Kong site. I live in the US and I'm not sure if I want a Hong Kong OS. I have honestly read through these forums and tried to get all my answers here .... but I just want to double check before I make a big mistake and blow up my phone. Thank you all.
Click to expand...
Click to collapse
don't worry, just run the USPL tool, after running this tool, it will reboot your phone automatically... Than flash your phone with a WM6 rom or the B&B rom... And thats it... make sure you backup your contacts before you do the flash, cause it will wipe all your contacts from your phone.
If you don't like the rom you flashed, just run USPL again, and flash it with another rom or back to factory rom.
If you've got any probs, just let us know... there is a lot of wizards out here, who are willing to help. You also can pm me anytime. I'm glad to help if I can.
cheers and goodluck
Beat me to it coolGadget!!
Anyway if you want to see how the Arteimg.nbh is used read this:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
You'll need a SD_card to do it.
Good luck, but you wont need it as you seem to have done your homework and as co0lGadget says if you get stuck we'll give you a hand.
macguffin said:
Beat me to it coolGadget!!
Anyway if you want to see how the Arteimg.nbh is used read this:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
You'll need a SD_card to do it.
Good luck, but you wont need it as you seem to have done your homework and as co0lGadget says if you get stuck we'll give you a hand.
Click to expand...
Click to collapse
Hey Matt, good to see you here... I didn't beat you mate... cause I was pretty sure, Wizards like you will be very helpfull too ;-)
You Guys are the best!
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
Don't worry u need Only 30 minutes for update Rom.But remember need Run USPL by Pof.When your Phone have SPL 1.11 u can update any Rom u like..!
Cheers..!
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
I think you have enough time, the whole procedure takes less than 15mins.
No need to take out the card, just follow the instructions above.
Good luck!
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
No need to take the card out.
You probably do have time USPL take about 3 mins flash of ROM takes about 10-15
However these things are always best to do if you're not in a rush or desperate to get your phone up and running. Also if you put tom's b&b on you'll need about 30 minutes to just play with it
tom_codon said:
Don't worry u need Only 30 minutes for update Rom.But remember need Run USPL by Pof.When your Phone have SPL 1.11 u can update any Rom u like..!
Cheers..!
Click to expand...
Click to collapse
When your Phone have SPL 1.11 - just in case you're wondering this is one of the red numbers you see when the phone first starts up, but you probably already knew that.
Holding my breath
OK, I'm going to do it - soft resetting now. But before I take the plunge, will you wizards please tell me - will I have the least problems with the UK WM6 release (which I found posted here as I can't d/l it from the site) or Tom's B&B which looks very cool but seems to have caused problems for some people. I trust your judgement - please tell me what you think. And btw, even though I'm old I love gadgets and cool tricks, so TouchFlo looks awesome to me, unless it is going to cause problems when installing files etc as I've read here.
Cinamon said:
OK, I'm going to do it - soft resetting now. But before I take the plunge, will you wizards please tell me - will I have the least problems with the UK WM6 release (which I found posted here as I can't d/l it from the site) or Tom's B&B which looks very cool but seems to have caused problems for some people. I trust your judgement - please tell me what you think. And btw, even though I'm old I love gadgets and cool tricks, so TouchFlo looks awesome to me, unless it is going to cause problems when installing files etc as I've read here.
Click to expand...
Click to collapse
WM6 is ok but not that different from WM5 to look at and I guarantee that by tomorrow you'll have wanted to see what tom's rom is like and had to re-flash.
Since using toms rom i've been able to dump a lot of my third party software (mostly stuff from spb) and as you say it's very cool to looks at and will impress all your friends.
OK Tom's it is .......
Cross your fingers for me please ....
Postponing the Flash
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Cinamon said:
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Click to expand...
Click to collapse
Hi Interesting...!
Take care..!
Cinamon said:
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Click to expand...
Click to collapse
You probably has the WM5 bug or something. With the WM5 rom, sometimes it will mess up your sd card with folders in strange caracters etc...
But you're right, if you want to do this, and its your first time, you better do it when you're not in the rush... just prepare good, sit back and relax, and the flash will be good ;-)
I'm not sure if I'll be able to get online tonight... cause my internet is shut off since friday, my provider can't tell me where the problem is, and how to fix it... So I hope tonight after work, I'll be able to get online at home. And be able to help you out if needed... so fingers cross...
GoodLuck...
CoolGadget said:
You probably has the WM5 bug or something. With the WM5 rom, sometimes it will mess up your sd card with folders in strange caracters etc......
Click to expand...
Click to collapse
I've been watching this thread and sorry to hi jack the thread. But, this was one of my questions about updating ROMS from original WM5. I haven't gotten the phone yet (P3300), but I want to upgrade it to B&B when I get it. Should I run the patch for the card corruption fix before I do the USPL and ROM flash? Or just go strait to the USPL and ROM update?
I've been reading for a long time but I'm still not very clear on what programs to use to flash and all that. I also want to be able to store my original ROM just in case I want to revert back to OEM. How do I do that?
shawndh said:
I've been watching this thread and sorry to hi jack the thread. But, this was one of my questions about updating ROMS from original WM5. I haven't gotten the phone yet (P3300), but I want to upgrade it to B&B when I get it. Should I run the patch for the card corruption fix before I do the USPL and ROM flash? Or just go strait to the USPL and ROM update?
I've been reading for a long time but I'm still not very clear on what programs to use to flash and all that. I also want to be able to store my original ROM just in case I want to revert back to OEM. How do I do that?
Click to expand...
Click to collapse
who's your phone provider?
macguffin said:
who's your phone provider?
Click to expand...
Click to collapse
I'll be using it on T-Mobile, USA. The phone will also be purchased in the US.
BTW, Just to clarify, I'm buying the phone from an online store, so the phone will be unlocked. I'll have to reconfigure it to work with T-Mobile SMS and T-Mobile Web service.
Just run the USPL tool and then the rom of your choice.
If anything does go wrong you can get an original wm5 rom from here
http://rapidshare.com/files/17854890...0_wwe_ship.exe
If you brick your device just go into the bootloader screen and run this it will get you back to wm5 and you can try again.
macguffin said:
Just run the USPL tool and then the rom of your choice.
If anything does go wrong you can get an original wm5 rom from here
http://rapidshare.com/files/17854890...0_wwe_ship.exe
If you brick your device just go into the bootloader screen and run this it will get you back to wm5 and you can try again.
Click to expand...
Click to collapse
So I can't "dump" and store my own ROM? I have to download a dumped WM5 OEM from from someone else? I just wanted to make sure that I could put it back exactly the way it was just in case I needed to send it back or ship to HTC for repairs or something.
Also, will they be able to tell that the ROM was flashed and flashed back if I send it in for warranty repairs?
i did this upgrade and got stuck on the logo screen what should i do? thanks
No one will be able to help you unless you give more information.
What did you do? Ugrade can mean so many things
I probably won't be able to help you; however, no one will be able to help you if you are not clear about what your problem is and how you got there.
Good luck
hotrod101 said:
No one will be able to help you unless you give more information.
What did you do? Ugrade can mean so many things
I probably won't be able to help you; however, no one will be able to help you if you are not clear about what your problem is and how you got there.
Good luck
Click to expand...
Click to collapse
ok, i tried to change the rom with this 6.1 everything worked fine but when the phone restarted it didnt come out of the window symbol , waited for half an hour or so nothing happened
jaibobro said:
ok, i tried to change the rom with this 6.1 everything worked fine but when the phone restarted it didnt come out of the window symbol , waited for half an hour or so nothing happened
Click to expand...
Click to collapse
Wow! Still no info given! BE MORE SPECIFIC!!!!!!!!!!!
I think what they are asking is:
What specific rom upgrade did you use?
What steps did you take to assure the rom upgrade was complete?
Were any errors present once you started/completed the upgrade?
djetaine said:
I think what they are asking is:
What specific rom upgrade did you use?
What steps did you take to assure the rom upgrade was complete?
Were any errors present once you started/completed the upgrade?
Click to expand...
Click to collapse
well folks first i unlocked with the 2.31 coke spl i must say mi vogue its a sprint one, then i loaded the almost oem sprint rom v 3.0
then when the rom was loaded (100%) i disconnected the device
turned on win logo appeared this: m 03, b 01, p acaaaam-4070, r 2.13.00 and d 3.04 then desappered and thats it stuck on win logo......
thanks for your interest
jaibobro said:
well folks first i unlocked with the 2.31 coke spl i must say mi vogue its a sprint one, then i loaded the almost oem sprint rom v 3.0
then when the rom was loaded (100%) i disconnected the device
turned on win logo appeared this: m 03, b 01, p acaaaam-4070, r 2.13.00 and d 3.04 then desappered and thats it stuck on win logo......
thanks for your interest
Click to expand...
Click to collapse
Radio 2.13.00???? I think you needed to load a 3.xx radio.
TheChampJT said:
Radio 2.13.00???? I think you needed to load a 3.xx radio.
Click to expand...
Click to collapse
You really are a Champ TheChampJT for taking time to help this guy out. I wish I could offer some advice as well; however, I don't know a thing about upgrading ROM's or Radio's yet. I haven't even really bothered to read up about it yet. Maybe one day I will, I'm really not in that big of a hurry; however, it would be nice if I could help all of these noobs who get stuck when upgrading.
Good for you for helping out. I only hope that there will be people here willing to help me out when I am finally brave enough to take the plunge into ROM/Radio upgrading.
Rod
hotrod101 said:
You really are a Champ TheChampJT for taking time to help this guy out. I wish I could offer some advice as well; however, I don't know a thing about upgrading ROM's or Radio's yet. I haven't even really bothered to read up about it yet. Maybe one day I will, I'm really not in that big of a hurry; however, it would be nice if I could help all of these noobs who get stuck when upgrading.
Good for you for helping out. I only hope that there will be people here willing to help me out when I am finally brave enough to take the plunge into ROM/Radio upgrading.
Rod
Click to expand...
Click to collapse
To be honest, i just jumped right in! I said to myself, I'm doing it, and I hope this s*** works! There is a tutorial posted @ PPCGeeks, link in my Tips & Tricks thread. As long as you follow those, you'll be good to go. I flashed one ROM, the I built my own with the PPCKitchen, and made about 10 builds in the last month, so far so good, and my device is mine, with my own ROM.
TheChampJT said:
Radio 2.13.00???? I think you needed to load a 3.xx radio.
Click to expand...
Click to collapse
and how do i do that mr?sorry if im being bothering but as you can see im new on this
thank you again
I've got the same problem now
i unlocked, and installed WDM's diamond theme rom. i'm on the "checking OS" start screen and it never goes any further.
halp please?
if you go to ppcgeeks.com there is a thread (i believe it is a sticky) that will show you how to fix your phone so you can load the OS. I had this problem when I first upgraded to a GPS ROM.
Like the title says this is my virgin flash. So what do you guys think should be my first ROM? I've looked at a bunch.
Looking for stability and style.
Just to get this correct I need to unlock my phone even though it's att and I'm using att. (Should I just unlock the CID or both)
Then I need to install HardSPL 7.1?
Then flash the ROM I choose.
Then load APPS as needed?
Thanks for the help!
Hardspl v7 http://forum.xda-developers.com/showthread.php?t=296722
I would unlock and supercid http://forum.xda-developers.com/showthread.php?t=293665 then I ran hardspl again just to make sure, because unlocking changes the bootloader.
Then you should be good to go. Hardspl will help you in case you get a bad flash or bad rom, it's easier to recover. Supercid will allow to flash unsigned code (custom roms).
Looks like your on the right track, I'm just not sure where you got v7.1 for hardspl? That's why I included the links.
Also, "any rom you choose", but only from the Hermes forum. Flash a rom for another device means instant brick and you may not be able to recover it.
Hard SPL is a safety net only, there are NO guarantees you won't end up with a permanent brick, Hard SPL or no...
Most times you have to do something REALLY dumb to end up with a total brick but there is a miniscule chance, especially if you are playing around with the radio rom.
Happy flashing...
It was late last night and I couldn't remember if it was 7 or 7.1 lol. I'm charging the phone now. Gonna make sure it's nice and full then I'm gonna give it a shot. Thanks to you both for the help. I just needed to hear I was going about this the right way. I think I'll try one of Schaps ROM's first then try one of Josh's and see what I like about each. I've only got about 50 pages in on each so I'll read alittle more while the phone is charging. Thanks again!!
Oh wanted to ask also is there a Page or sticky just for Apps, skins, themes, and such or do I need to know what I'm looking for and search it?
Dang I thought my other phone had a microSD card in it.....turns out it's M2. Guess I'll stop on the way to work to pick one up. Non SDHC 2gb or less! Another question when it states now copy this to your phone....What file do I copy it to? (I'll head back to the Wiki and see if I can find that myself but figured I'd ask).
copy the RUU_signed.nbh and rename it hermimg.nbh the exe file is the flashing utility, and you don't need it if your flashing via the sd card.
make sure the card is formatted as fat32 (not fat).
Ok I did it the RUU way without the SD card. I'm now at 2.10.01 so I'm good. Now off to work and will hit the unlocker next. Thanks for the help!!
Ok unlock has been completed now I'm going to run Hardspl again. What about the radio I see that is has changed. Should I change that back to what it was at some point?
Ok I've done my first ROM flash wow! I grabbed Schap's WM6 Pro 4.31. I'll try it out and see if I like it. If not try another. Thanks again for helping me thru!
If you wish to risk changing the radio, do so but only if theres a problem. If the radio rom flash is interrupted, you will almost certainly have a brick on your hands.
Use the sd card method to flash so you then minimize the amount of problems you may have.
Remember though, if the radio rom is working fine, don't touch it....
Cheers...
boog321 said:
I would unlock and supercid http://forum.xda-developers.com/showthread.php?t=293665 then I ran hardspl again just to make sure, because unlocking changes the bootloader.
Click to expand...
Click to collapse
Hard-SPL makes your device appear as SuperCID... it's all you need.
vp3G said:
Hard-SPL makes your device appear as SuperCID... it's all you need.
Click to expand...
Click to collapse
Ah, cool! Thanks, vp3G! I guess I took all the info wrong. Reading the 2 threads it wasn't clear. I guess my method worked though! haha
Yea, it's all quite confusing... Hard-SPL ended up negating the need to use pof's unlocker. Olipro is a friggin' genius (as is pof).
So all I needed to do was Hardspl and I would have been good to go? I have another hermes I'm doing for myself. I do find I'm not getting very little service if not none at all in the house. I use to get 3 or 4 bars. Should I change the radio? Does the radio change with each ROM loaded?
You can try going back to the radio that you originally had, just do it the sd method to minimize the chance of something going wrong.
You could compare the difference between the 2 hermes.
vp3G said:
Hard-SPL ended up negating the need to use pof's unlocker).
Click to expand...
Click to collapse
True, but if you wish to sim unlock then you still need Pof's unlocker.
I have to admit I'm getting there myself LOL. It really isn't that hard after you do it the first time. Some things I got stuck on (Pure newbness).
Some ROMs are compressed with .rar and .7.....I found you must download a unzipper/compressor to extract the files you need. I used Winrar some use 7zip. I'm getting there. There is soooo much info on this site. You find that you search for an answer and you get a page of answers with 3 different ways to do it LOL!
We have all been there at one point, too!
When I first brought my hermes home and it was still locked to the at&t network, I was so worried I was going to break it.
Lots of reading, and lots of tinkering later, and I am working on my own rom. Granted, I didn't port it, but I have done so much tweaking that I don't think anyone could tell where it came from.
Funny thing is, I still keep learning so much more. I think it's like my other hobby, ham radio, I don't think anyone can try everything! It seems to go on and on.
Ya know you gotta love the internet LOL. I've learned about so many things (mostly due to them breaking lol). Here's another question for you guys. For those who have Josh's 6.1 ROM. Where is the lock unlock button??? I see the lock device setup for password protection but I don't see a regular lock the screen so I don't make but calls button. LOL I'm gonna try to load his S2U2 thing when I figure out how to do it.
You can add device lock to the today screen under settings>today (at least it should be there), but if your using manilla I don't have a clue lol
im sorry if this thread was already made or has already been answered but idky i havent found nething mentioning how to download and install the WM6.5 for touch pro 2 can any1 plz help me... i really dnt wanna wait 4 the upgrade im tryna get it now i noe its possible but i just cant find nethin on how 2 do it... plz and thanks 2 any1 who makes an effort in answering my thread.
liljah36388 said:
im sorry if this thread was already made or has already been answered but idky i havent found nething mentioning how to download and install the WM6.5 for touch pro 2 can any1 plz help me... i really dnt wanna wait 4 the upgrade im tryna get it now i noe its possible but i just cant find nethin on how 2 do it... plz and thanks 2 any1 who makes an effort in answering my thread.
Click to expand...
Click to collapse
No search! Impossible. Theres a whole forum dedicated to flashing including WM 6.5. Looking through that forum there is even a sticky for noobs on flashing. I won't even post the link.
Heres the link to flashing! Start with this.
http://forum.xda-developers.com/showthread.php?t=550540
But seriously, I'm not trying to give you a hard time, its just that if you couldn't find that forum you probably shouldnt be trying to flash a ROM.
Welcome to forums
Read deeply the Wiki (Rhodium)
And here:
http://forum.xda-developers.com/showthread.php?t=550540
Then select your desired 6.5 ROM and enjoy!
its funny cuz i jsut found this thread afta i posted this but now where do i find the ROMS
liljah36388 said:
its funny cuz i jsut found this thread afta i posted this but now where do i find the ROMS
Click to expand...
Click to collapse
Hmmm...I smell a troll. Managed to find XDA forums to ask about ROMs but can't understand the concept of searching? Nah, I don't buy it, just a kid playing around.
Try here...
http://forum.xda-developers.com/forumdisplay.php?f=490
Getting WM 6.5 shouldn't be this hard, SOS - I need help!
I'm having the same problem. . . . . I have flash my T-Mobile TP2 by following all the instructions posted by mskip. I have the multi color screen (red, green, blue white) with the following information:
RHOD210 32 SS- BC
SPL-0.85 OlinNex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
505,527 807, 853
811,196 199,193
203,860 Calibrated
So my TP2 is flashed. . . . My phone still says 6.1 when re-started.
Now What? I know people are going to say download a rom from the Rhodium forms. . . . I have about 20 downloaded to my computer.
My question is how in the HELL do you put window' mobile 6.5 in the the TP2? I have read thru many threads however no one address the most simple of questions or perhaps I'm just not understanding a crital step in the update process.
Where do you find the rom to install wm 6.5? And how to get the rom on to the phone? Oh and please don't point to [Resources] Flashing your First GSM Rhodium Rom (For Noobs) I have read that about 100 times.
If I find the correct rom, then what?
Is there a drag and drop process that I'm missing or do I have to reformat a file to RUU,NBH or EXE or somthing.
I have downloaded the CustomRUU, Rhodium-HardSPL and every version of wm 6.5 manilla type file I can find however I can't find the simple rom to upgrade from 6.1 to 6.5
I'm so confused and fustratiated that I am going to sell my TP2 and go back to the EASY iPhone (Jail Breaking was soo easy) or Blackberry Bold.
Please HELP. . . . I don't want to have to junk a phone that I want to keep
so youve had the hardSPL part already done i see.
now pick a rom and open that zip or rar file
in there are two files, drag and drop them on your desktop
now connect your phone with activesync or devicecentre to your computer
and make sure your phone is and stays connected
now double click on the RUU file from within the zip/rar file and follow the on-screen directions.
thats it.
hope this was helpfull
OK, I have followed your intruction to the letter and I have made progress. . . . . however I while following to prompts on the program (The Update Utility) I got the following error message:
ERROR [240]: file open
The Update Utility can not open the requested field.
Please check your Update Utility.
And on another attempt I got the to the end and nothing happend.
The last prompt said the following:
PDA PHONE UPDATE UTILITY 3.27.4.3
Verify that you want to update the Rom version
From
Image version:
To
Image Version: 0.85.OliNex
Click next to proceed: Click Cancel to quit.
. . . . I hit the next button and nothing happens. I still have WM 6.1
What am I doing wrong or am I missing a crital step?
Seems like I need the program to recognize the rom some how or mabe I'm way off.
I really do appreciate your help!
If you are using the CustomRUU.exe that comes with HardSPL, you cannot flash ROMs with it. That CustomRUU.exe is specially made for flashing HardSPL, and won't flash other stuff.
Try downloading this ROM (it's the one I use on my device, it's in my signature), and once it's downloaded, extract it using 7-zip/Universal Extractor/WinRAR or any other RAR unizipping utility. Ensure the directory that you extract the RAR file to has no other .NBH files in it. Now, run CustomRUU.exe (the one that comes in the RAR file) and follow the directions. Keep in mind that when it says what Image Version you are updating to in CustomRUU.exe, it should NOT say 0.85.OliNex.
Now, if that still doesn't work, try transferring RHODIMG.nbh to any MicroSD card (ensure it's formatted to FAT32), putting the microSD card back into the device, and manually go into the bootloader (Hold Volume-Down and the Power button). Follow the instructions, flash the ROM, soft reset (or yank out the battery) when it's completely finished, and congratulations, you're running Windows Mobile 6.5!
Hi fellas:
I just bot a used Touch Pro 2 with 6.1 for the wife for xmus.
Is it possible to use the HTC Rom that is listed on the EU site on a US HTC and then try to put it on Roger's 3G/Edge in Canada?
Thanks!
ok...I guess not
Is there another ROM that I would have better luck with?
My carrier (Rogers Canada) says that the 3G I have will not work on their network because it is T-Mobilized. The Edge Network is working (slow) and now I'm worried that this may never work on 3G here.
I read there is a vanilla "unlocked" 6.5 ROM here. Is that what I should be shooting for?
If you hardspl your device then you can put any rom on it that you want. Search, read and learn in the rom section.
From what i understand is that you bought a Touch pro 2 with T-mobile rom installed. So what you need to do is look in the rom section and read the flashing for noobs guide. Then pick a rom and flash. I think you will like the |R|6.5.3|ROM|WWE| ★ EnergyROM "Phoenix 2" 28011/21885 ★Dec 25★ Sense 2.1/Titanium. After you've flashed your T-mobile rom will be gone. Good luck
Hi I have recently tried to flash my Touch Diamond ROM, messed the hell out of it and, the only way to fix it is to flash it with the original stock ROM that it came with. Could anyone please help me with this.
HTC Touch Diamond P3700
Rom SPL 1.93
CID HTC_017
The phone was not branded straight from the manufacturer.
The problem is that I tried to flash the phone without doing hard SPL
Cleaned the whole phone and the only thing working now is the connection to the computer Trough mtty. I tried using other ROMS but they stop at 1% and gave me a vendor incorect error or something.
just download it from htc site
I tried but when I select the Serial number it says that the update is not for my phone and doesn't let me download it. and the ones that they have are only updates.
Does anyone have a valid Serial Number that i can use to download update ROM from HTC?
Have you tried any official roms posted around here? like this one: http://forum.xda-developers.com/showthread.php?t=410720
I did that but it started to load the roam into the phone and crashed at 1%,
it gave "Invalid Vendor Id" error and it turns off. Is there like a unversal HTC rom that at very least gets me access to the NANd Memory
I just want to HArd_spl the phone and install a new ROm
Dont even care about the original ROM any more
ekirakosyan said:
I did that but it started to load the roam into the phone and crashed at 1%,
it gave "Invalid Vendor Id" error and it turns off. Is there like a unversal HTC rom that at very least gets me access to the NANd Memory
I just want to HArd_spl the phone and install a new ROm
Dont even care about the original ROM any more
Click to expand...
Click to collapse
Try that one HT828GN27034 and let me know the result.
Oh very nice, thank U very much, I'll try it right now.
All of the Upgrade ROMs just give me invalid Vender ID error message
Doesn't make sense to me though, i tried flashing the Phone With Hard-SPL but for some odd reason it hangs at 0%.
Is my phone dead for good or there might be a way to fix this issue
did u installed OLINEX first?
If ur phone is in 3 color screen try to install Olinex 1.4 and after that flash it with stock ROM.
No thats the thing, I Just Cleaned the phone with Mtty and tried to flash it with WM6.5. but after the cleaning nothing really work out. and i cant even go back to the the old Rom cose I did not back it up.
ekirakosyan said:
No thats the thing, I Just Cleaned the phone with Mtty and tried to flash it with WM6.5. but after the cleaning nothing really work out. and i cant even go back to the the old Rom cose I did not back it up.
Click to expand...
Click to collapse
not even hard reset? did u tried?
yeah man i tried hard reset too, that was no go, I wish there was a way to remove the CID Lock
ekirakosyan said:
yeah man i tried hard reset too, that was no go, I wish there was a way to remove the CID Lock
Click to expand...
Click to collapse
What windows are you using?
I am using windows 7, but i tried the same process on vista and XP, same result, the phone connects to the pc, and right as i try to load one of the ROMs from HTC's website, the thing crashes at 1% and says invalid vendor ID error.
IS there a universal ROM that can be loaded, or my phone is bricked for good?
Perhaps you want to have a look here: http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades
Succes!
Oh wow this place has every ROM type but mine, so not fare, u think if i download and try every one of these other ones I might have some sort of luck?
I used HTC's MTTY and figuered that My CID is HTC__017, and the 1.93 Spl
and mine is not listed there.
Hey, I have the EXACT same problem. My diamond is the US 3G Unbranded phone (DIAM110, CID=HTC__017). I've both called and emailed HTC asking for the ROM, but they say that they do not have it. The only way to get it would be to request it from the vendor you bought it from. I got mine as a gift so I can't really do that. Oh, and if you want them to flash it for you, you have to pay like $160. Not cheap. And you know HTC, they'll make up that your main board's fried, and ask you to pay $300. If you have WARRANTY, send ASAP. Mine expired a week ago.
As for flashing random ROMs, most likely this will not work (although you can try). The way your phone determines if it's allowed to install the ROM is by looking at the beginning of the file. If you open up the NBH with an editor, you can see and even change the ID. The problem is, HTC "signs" the file with a 2048 RSA key (2^2048), and if you even change one digit then the signature will be invalid.
So yes, I have the exact same problem, my thread is at: http://forum.xda-developers.com/showthread.php?t=623320, so if you have any luck, or I do, check out that thread.
At this point, the only things that are left to do are to beg HTC or a vendor for the ROM update (I might find HTC developer's mailing address and ask them); find a way to get into Soft SPL, or in other words load into memory a bootloader that would allow flashing of unsigned code; or find a vulnerability that would allow flashing unsigned code (has been done with Trinity).
Also you can try contacting Olipro, cmonex, and pof, but I so far have had no luck.
Hopefully we'll find something.
~codeslicer
Hey man, thanks for the reply, we are pretty much on the same exact boat, am gonna try to contact HTC see if my warranty is still up, and the phone i got it as a gift, I don't have a recipt of a proof of purchase, what do u think i should tell them. And if that doesn't work, I think I am going to try every single 1.93 ROM
in this site.
http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades
And also what is your CID. if its HTC_017 then its not here, but there are a lot of them in here so u might get some luck.
let me know how it goes man.
I think i have the solution
can u please confirm clearly as what has happened , hope i have the specific solution .