stuck on start screen - Touch CDMA Windows Mobile ROM Development

i did this upgrade and got stuck on the logo screen what should i do? thanks

No one will be able to help you unless you give more information.
What did you do? Ugrade can mean so many things
I probably won't be able to help you; however, no one will be able to help you if you are not clear about what your problem is and how you got there.
Good luck

hotrod101 said:
No one will be able to help you unless you give more information.
What did you do? Ugrade can mean so many things
I probably won't be able to help you; however, no one will be able to help you if you are not clear about what your problem is and how you got there.
Good luck
Click to expand...
Click to collapse
ok, i tried to change the rom with this 6.1 everything worked fine but when the phone restarted it didnt come out of the window symbol , waited for half an hour or so nothing happened

jaibobro said:
ok, i tried to change the rom with this 6.1 everything worked fine but when the phone restarted it didnt come out of the window symbol , waited for half an hour or so nothing happened
Click to expand...
Click to collapse
Wow! Still no info given! BE MORE SPECIFIC!!!!!!!!!!!

I think what they are asking is:
What specific rom upgrade did you use?
What steps did you take to assure the rom upgrade was complete?
Were any errors present once you started/completed the upgrade?

djetaine said:
I think what they are asking is:
What specific rom upgrade did you use?
What steps did you take to assure the rom upgrade was complete?
Were any errors present once you started/completed the upgrade?
Click to expand...
Click to collapse
well folks first i unlocked with the 2.31 coke spl i must say mi vogue its a sprint one, then i loaded the almost oem sprint rom v 3.0
then when the rom was loaded (100%) i disconnected the device
turned on win logo appeared this: m 03, b 01, p acaaaam-4070, r 2.13.00 and d 3.04 then desappered and thats it stuck on win logo......
thanks for your interest

jaibobro said:
well folks first i unlocked with the 2.31 coke spl i must say mi vogue its a sprint one, then i loaded the almost oem sprint rom v 3.0
then when the rom was loaded (100%) i disconnected the device
turned on win logo appeared this: m 03, b 01, p acaaaam-4070, r 2.13.00 and d 3.04 then desappered and thats it stuck on win logo......
thanks for your interest
Click to expand...
Click to collapse
Radio 2.13.00???? I think you needed to load a 3.xx radio.

TheChampJT said:
Radio 2.13.00???? I think you needed to load a 3.xx radio.
Click to expand...
Click to collapse
You really are a Champ TheChampJT for taking time to help this guy out. I wish I could offer some advice as well; however, I don't know a thing about upgrading ROM's or Radio's yet. I haven't even really bothered to read up about it yet. Maybe one day I will, I'm really not in that big of a hurry; however, it would be nice if I could help all of these noobs who get stuck when upgrading.
Good for you for helping out. I only hope that there will be people here willing to help me out when I am finally brave enough to take the plunge into ROM/Radio upgrading.
Rod

hotrod101 said:
You really are a Champ TheChampJT for taking time to help this guy out. I wish I could offer some advice as well; however, I don't know a thing about upgrading ROM's or Radio's yet. I haven't even really bothered to read up about it yet. Maybe one day I will, I'm really not in that big of a hurry; however, it would be nice if I could help all of these noobs who get stuck when upgrading.
Good for you for helping out. I only hope that there will be people here willing to help me out when I am finally brave enough to take the plunge into ROM/Radio upgrading.
Rod
Click to expand...
Click to collapse
To be honest, i just jumped right in! I said to myself, I'm doing it, and I hope this s*** works! There is a tutorial posted @ PPCGeeks, link in my Tips & Tricks thread. As long as you follow those, you'll be good to go. I flashed one ROM, the I built my own with the PPCKitchen, and made about 10 builds in the last month, so far so good, and my device is mine, with my own ROM.

TheChampJT said:
Radio 2.13.00???? I think you needed to load a 3.xx radio.
Click to expand...
Click to collapse
and how do i do that mr?sorry if im being bothering but as you can see im new on this
thank you again

I've got the same problem now
i unlocked, and installed WDM's diamond theme rom. i'm on the "checking OS" start screen and it never goes any further.
halp please?

if you go to ppcgeeks.com there is a thread (i believe it is a sticky) that will show you how to fix your phone so you can load the OS. I had this problem when I first upgraded to a GPS ROM.

Related

"if it ain't broke, don't fix it!" Update to new R

"if it ain't broke, don't fix it!" Is Kelfords statement which keeps him from upgrading.
I have the same feeling. I am a scary type: Afraid to brick my Jasjar.
So here are some questions to all that did the job:
1. After some weeks... still runs faster then before U-day?
2. Which problems have been solved defenitely?
3. Tell me why I am a sucker not to upgrade.
Huib
Re: "if it ain't broke, don't fix it!" Update to n
herpi said:
1. After some weeks... still runs faster then before U-day?
2. Which problems have been solved defenitely?
3. Tell me why I am a sucker not to upgrade.
Huib
Click to expand...
Click to collapse
1. Yes, I feel it's faster.
2. Update is not only for bug fix.
3. Some people still use Win98. You are not alone.
qt
I have upgraded mine twice in 3 days...
First with the official orange update, and second with the same rom but radio version 1.09 using the no id method..
Both worked very well and and the latest version is faster, more reliable and much better phone wise...
3. Some people are affraid that they will lose their guaranty if the upgrade.
But what is more worse then trying to upgrade after the waranty has expired, and then find out you have a model that gets stuck in the boot screen?
If you think about that, it's even better to upgrade to check if it gets stuck in the bootscreen, and send it back for another model that doesn't have this bug.
True or not?
Or you can just choose to stay with an unstable version, never upgrade at all and have a device with all kinds of bugs, and outdated os. Just like windows 98 users ^^.
i would say, if you are afraid, why not bring your universal to the customer services of your retailer to ask them to upgrade it.
My questions about upgrading to a non-O2 ROM are:
How do I get back GPRS/3G settings, MMS and SMS settings, all that stuff that the O2 ROM has and the JasJar one doesn't?
Also, does the JasJar ROM have the AKU2 feature (since I can't currently sync with our exchange server)?
qtotter said:
i would say, if you are afraid, why not bring your universal to the customer services of your retailer to ask them to do it.
Click to expand...
Click to collapse
Qtotter,
I am not that afraid. I am a software guy myself.
But I am so horribly dependent on my phone ( living in the middle of nowhere of Romania) that I consider to buy another one for the case that I am stuck.
I am continuously connected to MSN (clients and staff) All my agenda etc. etc. I have a simple Nokia as a backup. That's why I am afraid. I did an upgrade before, and all went nice. so I maybe....
Huib
herpi said:
I am not that afraid. I am a software guy myself.
But I am so horribly dependent on my phone ( living in the middle of nowhere of Romania) that I consider to buy another one for the case that I am stuck.
Huib
Click to expand...
Click to collapse
Did you buy it on eBay or something? If not, all you would have to do is just to take (or send) your uni to the retailer as long as the warranty is good if it gets stuck at splash screen.
Upgrading and updating is part of evolution.
If you brick it --> RTFM
You all got your point. I just upgraded succesfully.
Thanks for your input.
Huib
herpi said:
You all got your point. I just upgraded succesfully.
Thanks for your input.
Huib
Click to expand...
Click to collapse
Congrats!
To Brick or not to Brick that is the question
I can tell you personally that bricking the phone is a bad situation. However you have to ask your self if it brick doesn't that mean it was broken to begin with? I am bummed because I don't have my Jasjar but I appreciate having it more now that it is being repaired. At least make sure before upgrading that you hard reset the device, not that it matters because it all gets overwriten but you want question "is it something I did or installed?"
Re: To Brick or not to Brick that is the question
sandrobber said:
At least make sure before upgrading that you hard reset the device, not that it matters because it all gets overwriten but you want question "is it something I did or installed?"
Click to expand...
Click to collapse
Never thought about that. Good advice! Thanks.
qt
I'm in the "don't know enough about it" camp, but gonna give it a go sometime. Stupid question - will Sprite Back-Up reinstate you customization after an upgrade. I guess not but ....
Is the stuck in bootscreen a malfunction with the device ?
Mine is back to the shop due to this problem. I hope it's under warranty, I flashed it with the Tmob UK rom rather then the Tmob NL rom because I have everything in english and work at a international company.
So the new types don't have this bug (read: feature) so it's safe to reflash it again ?
Rick GM said:
I'm in the "don't know enough about it" camp, but gonna give it a go sometime. Stupid question - will Sprite Back-Up reinstate you customization after an upgrade. I guess not but ....
Click to expand...
Click to collapse
it's like before you update ur win xp sp1, you make a backup, and after u update ur system to sp2 and restore the backup, isn't it?
Sorry to sound stupid... but upgrading the Radio ROM will hard reset everything like upgrading the main ROM?
I just did the official Orange ROM upgrade. Should I now upgrade my radio, before I get too far into putting everything back?
Could someone give me a link to how I do upgrade the Radio ROM? Thanks
AndyCr15 said:
Sorry to sound stupid... but upgrading the Radio ROM will hard reset everything like upgrading the main ROM?
Click to expand...
Click to collapse
No.
You can find radio roms on the net, or download a shipped rom (it is an executable archived file) and decompress it to get three rom images, one of which is a radio rom.
Refer to
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
qt
Here is a link to the latest radio ROM, I installed this on my last unit, it didn't require a hard reset.
ftp://xda:[email protected]/Universal/Radio/UNI_radio_1.09.nbf.rar
The new O2 ROM is probably the way to go, it will give you 1.09.00 radio and the latest OS and ExtROMs.
Most people seem to have problems with ROM upgrades if they do a hard reset after flashing, so just finish the upgrade and poke the reset pin without the keys held in.

I have crossbow rom and will share with anyone who can unbrick my Uni

I have the crossbow rom leaked and then removed from this board yesterday. Sharing the rom is risky, but I'll take the risk to get my Universal going again. I promise to share with anyone who can get my Uni going again.
I'll share the rom but I won't upload to this site or post links. We must protect this great site.
For my bricked Universal see this thread and what I've already tried:
http://forum.xda-developers.com/showthread.php?t=289878
Thanks.
Yes. I want it ;-).
Last time when my Qtek 9000 stuck in bootloader I installed the bootloader again and the he came alive again.
Jorry said:
Last time when my Qtek 9000 stuck in bootloader I installed the bootloader again and the he came alive again.
Click to expand...
Click to collapse
I wish it was stuck in bootloader. But the screen shows nothing no matter what I do.
As I managed to brick it when upgrading the bootloader I'm thinking I've managed to delete the bootloader...
I agree with jorry reflashing the bootloader can help, it was the soultion for me
poussin69 said:
I agree with jorry reflashing the bootloader can help, it was the soultion for me
Click to expand...
Click to collapse
Thanks, but tried many many times. The PC just doesn't see the device and upgrading bootloader or rom just fails.
if u wrecked youre bootloader i think u have a problem. the only way to flash that rom is to get it out of youre universal and then reflash it using an hardware rom programmer unit.
i doubt it someone is able to help u with this.
good luck
Crossbow
And where to get the Crossbow ROM now ;-)?
So, if its totally bricked then you won't be needing the crossbow rom any more so feel free to send it to me ;-)
I think if you have really nothing on the screen you will be forced to do a RMA
As the others have said there are instructions how to recover it but if you haven't managed it via them then I am afraid it might be a RMA.
You are welcome to PM me with details about the location of crossbow too btw
Re: bricked phone
hey i was wondering if this new crossbow you installed bricked your fone? does anybody know if this is the same version faria is working on?
LovnGrlyGrlz said:
hey i was wondering if this new crossbow you installed bricked your fone? does anybody know if this is the same version faria is working on?
Click to expand...
Click to collapse
No not at all. My Uni was bricked long before crossbow appeared. Its been sat in a dark cupboard for 6 months and I only became interested in unbricking it to try crossbow. Sadly I've given up on this one, but glad all other Uni owners have the chance to use crossbow now.
Anyway my current phone is a Wizard so I'm following the Chinese ROM conversion project with great interest.
bigyellowdog said:
No not at all. My Uni was bricked long before crossbow appeared. Its been sat in a dark cupboard for 6 months and I only became interested in unbricking it to try crossbow. Sadly I've given up on this one, but glad all other Uni owners have the chance to use crossbow now.
Anyway my current phone is a Wizard so I'm following the Chinese ROM conversion project with great interest.
Click to expand...
Click to collapse
Stupid question perhaps, but did you ever consider borrowing someone else's fully charged battery to see what happens? A device does not usually die from doing nothing, but a battery might.
Also try to upgrade on radio rom sometimes it bahaves the same as you have mentioned when radio rom is corrupt

Better Safe than Sorry - Do Not Want to Brick My Phone

I very much want to upgrade my O2 Orbit Rom to either WM6 or the B&B developed by Tom. Right now it apparently does not have the UK WM5 on it; according to the Ebay seller I bought it from I would have to go to the Hong Kong site to get an "official update" but the seller claims it would be better not to do so as people are reporting losing their radio and bluetooth. So I have read and re-read through these threads. I hear stories of phones not working after being flashed so I want to be super cautious. Here is what I think I do:
1. Run USPL and wait 5 - 10 minutes until the computer reboots itself.
2. Run either RUU for Tom's B&B or run RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
for the UK WM6 upgrade.
And I should be upgraded, right?
If I end up with huge problems, I think I can revert back to the original factory ROM with the file called:
Arteimg.nbh
But how do I run a nbh file?
Which OS is least likely to cause problems?
Please be gentle with me - I'm a 51 year old woman who is in love with my Orbit and can't live without it so I don't want to take any chances to turn it into a brick. On the other hand, I'd really like to have WM6 and can't get it from the UK d/l site because my S/N matches the Hong Kong site. I live in the US and I'm not sure if I want a Hong Kong OS. I have honestly read through these forums and tried to get all my answers here .... but I just want to double check before I make a big mistake and blow up my phone. Thank you all.
Cinamon said:
I very much want to upgrade my O2 Orbit Rom to either WM6 or the B&B developed by Tom. Right now it apparently does not have the UK WM5 on it; according to the Ebay seller I bought it from I would have to go to the Hong Kong site to get an "official update" but the seller claims it would be better not to do so as people are reporting losing their radio and bluetooth. So I have read and re-read through these threads. I hear stories of phones not working after being flashed so I want to be super cautious. Here is what I think I do:
1. Run USPL and wait 5 - 10 minutes until the computer reboots itself.
2. Run either RUU for Tom's B&B or run RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
for the UK WM6 upgrade.
And I should be upgraded, right?
If I end up with huge problems, I think I can revert back to the original factory ROM with the file called:
Arteimg.nbh
But how do I run a nbh file?
Which OS is least likely to cause problems?
Please be gentle with me - I'm a 51 year old woman who is in love with my Orbit and can't live without it so I don't want to take any chances to turn it into a brick. On the other hand, I'd really like to have WM6 and can't get it from the UK d/l site because my S/N matches the Hong Kong site. I live in the US and I'm not sure if I want a Hong Kong OS. I have honestly read through these forums and tried to get all my answers here .... but I just want to double check before I make a big mistake and blow up my phone. Thank you all.
Click to expand...
Click to collapse
don't worry, just run the USPL tool, after running this tool, it will reboot your phone automatically... Than flash your phone with a WM6 rom or the B&B rom... And thats it... make sure you backup your contacts before you do the flash, cause it will wipe all your contacts from your phone.
If you don't like the rom you flashed, just run USPL again, and flash it with another rom or back to factory rom.
If you've got any probs, just let us know... there is a lot of wizards out here, who are willing to help. You also can pm me anytime. I'm glad to help if I can.
cheers and goodluck
Beat me to it coolGadget!!
Anyway if you want to see how the Arteimg.nbh is used read this:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
You'll need a SD_card to do it.
Good luck, but you wont need it as you seem to have done your homework and as co0lGadget says if you get stuck we'll give you a hand.
macguffin said:
Beat me to it coolGadget!!
Anyway if you want to see how the Arteimg.nbh is used read this:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
You'll need a SD_card to do it.
Good luck, but you wont need it as you seem to have done your homework and as co0lGadget says if you get stuck we'll give you a hand.
Click to expand...
Click to collapse
Hey Matt, good to see you here... I didn't beat you mate... cause I was pretty sure, Wizards like you will be very helpfull too ;-)
You Guys are the best!
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
Don't worry u need Only 30 minutes for update Rom.But remember need Run USPL by Pof.When your Phone have SPL 1.11 u can update any Rom u like..!
Cheers..!
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
I think you have enough time, the whole procedure takes less than 15mins.
No need to take out the card, just follow the instructions above.
Good luck!
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
No need to take the card out.
You probably do have time USPL take about 3 mins flash of ROM takes about 10-15
However these things are always best to do if you're not in a rush or desperate to get your phone up and running. Also if you put tom's b&b on you'll need about 30 minutes to just play with it
tom_codon said:
Don't worry u need Only 30 minutes for update Rom.But remember need Run USPL by Pof.When your Phone have SPL 1.11 u can update any Rom u like..!
Cheers..!
Click to expand...
Click to collapse
When your Phone have SPL 1.11 - just in case you're wondering this is one of the red numbers you see when the phone first starts up, but you probably already knew that.
Holding my breath
OK, I'm going to do it - soft resetting now. But before I take the plunge, will you wizards please tell me - will I have the least problems with the UK WM6 release (which I found posted here as I can't d/l it from the site) or Tom's B&B which looks very cool but seems to have caused problems for some people. I trust your judgement - please tell me what you think. And btw, even though I'm old I love gadgets and cool tricks, so TouchFlo looks awesome to me, unless it is going to cause problems when installing files etc as I've read here.
Cinamon said:
OK, I'm going to do it - soft resetting now. But before I take the plunge, will you wizards please tell me - will I have the least problems with the UK WM6 release (which I found posted here as I can't d/l it from the site) or Tom's B&B which looks very cool but seems to have caused problems for some people. I trust your judgement - please tell me what you think. And btw, even though I'm old I love gadgets and cool tricks, so TouchFlo looks awesome to me, unless it is going to cause problems when installing files etc as I've read here.
Click to expand...
Click to collapse
WM6 is ok but not that different from WM5 to look at and I guarantee that by tomorrow you'll have wanted to see what tom's rom is like and had to re-flash.
Since using toms rom i've been able to dump a lot of my third party software (mostly stuff from spb) and as you say it's very cool to looks at and will impress all your friends.
OK Tom's it is .......
Cross your fingers for me please ....
Postponing the Flash
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Cinamon said:
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Click to expand...
Click to collapse
Hi Interesting...!
Take care..!
Cinamon said:
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Click to expand...
Click to collapse
You probably has the WM5 bug or something. With the WM5 rom, sometimes it will mess up your sd card with folders in strange caracters etc...
But you're right, if you want to do this, and its your first time, you better do it when you're not in the rush... just prepare good, sit back and relax, and the flash will be good ;-)
I'm not sure if I'll be able to get online tonight... cause my internet is shut off since friday, my provider can't tell me where the problem is, and how to fix it... So I hope tonight after work, I'll be able to get online at home. And be able to help you out if needed... so fingers cross...
GoodLuck...
CoolGadget said:
You probably has the WM5 bug or something. With the WM5 rom, sometimes it will mess up your sd card with folders in strange caracters etc......
Click to expand...
Click to collapse
I've been watching this thread and sorry to hi jack the thread. But, this was one of my questions about updating ROMS from original WM5. I haven't gotten the phone yet (P3300), but I want to upgrade it to B&B when I get it. Should I run the patch for the card corruption fix before I do the USPL and ROM flash? Or just go strait to the USPL and ROM update?
I've been reading for a long time but I'm still not very clear on what programs to use to flash and all that. I also want to be able to store my original ROM just in case I want to revert back to OEM. How do I do that?
shawndh said:
I've been watching this thread and sorry to hi jack the thread. But, this was one of my questions about updating ROMS from original WM5. I haven't gotten the phone yet (P3300), but I want to upgrade it to B&B when I get it. Should I run the patch for the card corruption fix before I do the USPL and ROM flash? Or just go strait to the USPL and ROM update?
I've been reading for a long time but I'm still not very clear on what programs to use to flash and all that. I also want to be able to store my original ROM just in case I want to revert back to OEM. How do I do that?
Click to expand...
Click to collapse
who's your phone provider?
macguffin said:
who's your phone provider?
Click to expand...
Click to collapse
I'll be using it on T-Mobile, USA. The phone will also be purchased in the US.
BTW, Just to clarify, I'm buying the phone from an online store, so the phone will be unlocked. I'll have to reconfigure it to work with T-Mobile SMS and T-Mobile Web service.
Just run the USPL tool and then the rom of your choice.
If anything does go wrong you can get an original wm5 rom from here
http://rapidshare.com/files/17854890...0_wwe_ship.exe
If you brick your device just go into the bootloader screen and run this it will get you back to wm5 and you can try again.
macguffin said:
Just run the USPL tool and then the rom of your choice.
If anything does go wrong you can get an original wm5 rom from here
http://rapidshare.com/files/17854890...0_wwe_ship.exe
If you brick your device just go into the bootloader screen and run this it will get you back to wm5 and you can try again.
Click to expand...
Click to collapse
So I can't "dump" and store my own ROM? I have to download a dumped WM5 OEM from from someone else? I just wanted to make sure that I could put it back exactly the way it was just in case I needed to send it back or ship to HTC for repairs or something.
Also, will they be able to tell that the ROM was flashed and flashed back if I send it in for warranty repairs?

Need to figure out whats wrong with my vogue..help please

I RECENTLY PURCHASED A VOGUE ONLINE IT KEEPS RESETTING ITSELF TRIED NEW ROMS AND THE MINUTE I DISCONNECT THE USB CONNECTION IT RESETS ITSELF EVERY COUPLE OF MINUTES...HELP PLEASE..I WILL BE HERE ALL NIGHT
Alright.
1. Stop posting new threads about this! You are not the only one who has ever had a problem like this.
2. Post the link to where you got the original ROM.
3. Give us a DETAILED overview of what you did. The more you leave out, the less anyone can help.
4. Relax, these things can typically be fixed.
I think i have the wrong radio and it wont let me upgrade
JARVISLEROUGE said:
I think i have the wrong radio and it wont let me upgrade
Click to expand...
Click to collapse
Again, post more details!
You are only saying this because of the post in your other thread.
please forgive me i am a newbie and i am scared that i ruined my phone
i downloaded a new radio for the vogue but evidently it was a older version and i wasnt supposed to downgrade..now says "no radio"
i know that i must of broken some forum rules but it wont happen again.....I just need my phone back...
did you get it fixed?
still need help
STILL need help now my phone says no radio...no matter what rom i put on it..whats next? is this what they call bricked?
Did you try putting the phone into bootloader and flashing the stock ROM with radio?
Who is your provider?
taking steps forward....i think
i went back and reflashed radio 2.13.00 and now it is frozen at startup screen but the no radio is gone..
JARVISLEROUGE said:
i went back and reflashed radio 2.13.00 and now it is frozen at startup screen but the no radio is gone..
Click to expand...
Click to collapse
Who is your service with? I would like to find you the proper ROM.
sprint for now but want to flash to metro pcs...kinda want to prove that metro can handle a smartphone
thanks in advance
Flash it to radio 3.42.50, and install a proper Sprint ROM... you might as well have a working device than none at all.
can you send a link
please send me a link please
JARVISLEROUGE said:
sprint for now but want to flash to metro pcs...kinda want to prove that metro can handle a smartphone
thanks in advance
Click to expand...
Click to collapse
there are a few smart phones on metro flashed over...
UPDATE!!!!
Finally got the phone to boot
rom:1.12.651.1
radio:2.13.00
when i take it off the usb connection it shuts off after about 7 mins
so i either still have a radio conflict or i am just doomed with this phone...help me
WELL GO HERE FLASH OFFICAL UPGRADE...: http://www.htc.com/us/SupportDownloadList.aspx?p_id=76&cat=2 UPGRADE IS TO THE RIGHT UNDER DOWNLOAD...
THEN BEFORE YOU FLASH CUSTOM YOU NEED TO RUN IaMcOkEmAn'S UNLOCKER FOUND HERE :http://forum.ppcgeeks.com/showthread.php?t=20370 RUN2.31 BECAUSE AFTER THE OFFICAL UPGRADE YOU WILL BE GPS ENABLED...NOW LIKE I SAID SEARCH CUSTOMS!!!YOUR PHONE WILL BE A DIFFERENT DEVICE NOW...
Hoover is the man
Thanks hoover using nfsfans sprint 1.0 so far so good thank you so much you really helped me alot thanks for the patience....now whats next?:d

[Q] Can't seem to successfully flash any Rom's

Hey guys. A few months ago a brought this issue up on another site and I think I only got one response. I ended up getting lazy with it and too frustrated to worry about it, so I gave up. Well, I'm finally ready to try and resolve it again so I wanted to see if anyone here could help me before I screw something up and brick my device lol. I have a Retail Verizon HTC One (M7) that was purchased about 3 months ago. After I bought it, I Rooted, unlocked, S-OFF, installed TWRP, all that good stuff. Everything, from what I can remember, went smoothly when doing all those things. Well, I finally at one point, decided to test out a Rom and have not been able to successfully install one yet and I have no idea why. I have tried a few and TWRP always returns a "Failed". The most recent one I tried was the ViperOne 6.2.0 (May 11). The only exception for that one, was that the aroma installer actually did say "Successful" but when I booted up I was stuck in a boot loop. I'm sure I've done something along the way that has screwed something up but I have no clue what that would have been. I'm attaching a few pictures with some info on my current setup, in hopes that something might catch someone's eye and offer a solution. Thanks a head of time for any help guys.
Radiohead84 said:
Hey guys. A few months ago a brought this issue up on another site and I think I only got one response. I ended up getting lazy with it and too frustrated to worry about it, so I gave up. Well, I'm finally ready to try and resolve it again so I wanted to see if anyone here could help me before I screw something up and brick my device lol. I have a Retail Verizon HTC One (M7) that was purchased about 3 months ago. After I bought it, I Rooted, unlocked, S-OFF, installed TWRP, all that good stuff. Everything, from what I can remember, went smoothly when doing all those things. Well, I finally at one point, decided to test out a Rom and have not been able to successfully install one yet and I have no idea why. I have tried a few and TWRP always returns a "Failed". The most recent one I tried was the ViperOne 6.2.0 (May 11). The only exception for that one, was that the aroma installer actually did say "Successful" but when I booted up I was stuck in a boot loop. I'm sure I've done something along the way that has screwed something up but I have no clue what that would have been. I'm attaching a few pictures with some info on my current setup, in hopes that something might catch someone's eye and offer a solution. Thanks a head of time for any help guys.
Click to expand...
Click to collapse
How about try a different recovery?
Radiohead84 said:
Hey guys. A few months ago a brought this issue up on another site and I think I only got one response. I ended up getting lazy with it and too frustrated to worry about it, so I gave up. Well, I'm finally ready to try and resolve it again so I wanted to see if anyone here could help me before I screw something up and brick my device lol. I have a Retail Verizon HTC One (M7) that was purchased about 3 months ago. After I bought it, I Rooted, unlocked, S-OFF, installed TWRP, all that good stuff. Everything, from what I can remember, went smoothly when doing all those things. Well, I finally at one point, decided to test out a Rom and have not been able to successfully install one yet and I have no idea why. I have tried a few and TWRP always returns a "Failed". The most recent one I tried was the ViperOne 6.2.0 (May 11). The only exception for that one, was that the aroma installer actually did say "Successful" but when I booted up I was stuck in a boot loop. I'm sure I've done something along the way that has screwed something up but I have no clue what that would have been. I'm attaching a few pictures with some info on my current setup, in hopes that something might catch someone's eye and offer a solution. Thanks a head of time for any help guys.
Click to expand...
Click to collapse
You have the m7wlv recovery installed. Flash the current m7vzw and you should be good to go.
Sent from my One using Tapatalk
Ok, thank you both. Trying that now. I'll let you know how it goes.
Yep that did it! Wow...I feel like an idiot. Thank you guys. I really appreciate your help.
Radiohead84 said:
Ok, thank you both. Trying that now. I'll let you know how it goes.
Yep that did it! Wow...I feel like an idiot. Thank you guys. I really appreciate your help.
Click to expand...
Click to collapse
So what exactly did you do that worked?
Can you provide the recovery that worked for you ?
MMR4LIFE said:
So what exactly did you do that worked?
Can you provide the recovery that worked for you ?
Click to expand...
Click to collapse
Last night I just ended up flashing this RUU which worked: http://tinyurl.com/l3j7rhk
Then, after reading the solution offered here, I noticed on that same thread a link to TWRP 2.7.0.8 Decided to flash that and I am now able to successfully flash Rom's again. I tried two separate ones just to be sure. ViperOne and Cyanogen. Everything seems to be working as it should now.
did you installed kit kat ?
Radiohead84 said:
Last night I just ended up flashing this RUU which worked: http://tinyurl.com/l3j7rhk
Then, after reading the solution offered here, I noticed on that same thread a link to TWRP 2.7.0.8 Decided to flash that and I am now able to successfully flash Rom's again. I tried two separate ones just to be sure. ViperOne and Cyanogen. Everything seems to be working as it should now.
Click to expand...
Click to collapse
Hi
Mine Unlocked HTC One (Verizon) brought in US retail store. Now am using my GSM sim everything going well..
Can i install this custom ROM
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=230836252

Categories

Resources