Hi I have recently tried to flash my Touch Diamond ROM, messed the hell out of it and, the only way to fix it is to flash it with the original stock ROM that it came with. Could anyone please help me with this.
HTC Touch Diamond P3700
Rom SPL 1.93
CID HTC_017
The phone was not branded straight from the manufacturer.
The problem is that I tried to flash the phone without doing hard SPL
Cleaned the whole phone and the only thing working now is the connection to the computer Trough mtty. I tried using other ROMS but they stop at 1% and gave me a vendor incorect error or something.
just download it from htc site
I tried but when I select the Serial number it says that the update is not for my phone and doesn't let me download it. and the ones that they have are only updates.
Does anyone have a valid Serial Number that i can use to download update ROM from HTC?
Have you tried any official roms posted around here? like this one: http://forum.xda-developers.com/showthread.php?t=410720
I did that but it started to load the roam into the phone and crashed at 1%,
it gave "Invalid Vendor Id" error and it turns off. Is there like a unversal HTC rom that at very least gets me access to the NANd Memory
I just want to HArd_spl the phone and install a new ROm
Dont even care about the original ROM any more
ekirakosyan said:
I did that but it started to load the roam into the phone and crashed at 1%,
it gave "Invalid Vendor Id" error and it turns off. Is there like a unversal HTC rom that at very least gets me access to the NANd Memory
I just want to HArd_spl the phone and install a new ROm
Dont even care about the original ROM any more
Click to expand...
Click to collapse
Try that one HT828GN27034 and let me know the result.
Oh very nice, thank U very much, I'll try it right now.
All of the Upgrade ROMs just give me invalid Vender ID error message
Doesn't make sense to me though, i tried flashing the Phone With Hard-SPL but for some odd reason it hangs at 0%.
Is my phone dead for good or there might be a way to fix this issue
did u installed OLINEX first?
If ur phone is in 3 color screen try to install Olinex 1.4 and after that flash it with stock ROM.
No thats the thing, I Just Cleaned the phone with Mtty and tried to flash it with WM6.5. but after the cleaning nothing really work out. and i cant even go back to the the old Rom cose I did not back it up.
ekirakosyan said:
No thats the thing, I Just Cleaned the phone with Mtty and tried to flash it with WM6.5. but after the cleaning nothing really work out. and i cant even go back to the the old Rom cose I did not back it up.
Click to expand...
Click to collapse
not even hard reset? did u tried?
yeah man i tried hard reset too, that was no go, I wish there was a way to remove the CID Lock
ekirakosyan said:
yeah man i tried hard reset too, that was no go, I wish there was a way to remove the CID Lock
Click to expand...
Click to collapse
What windows are you using?
I am using windows 7, but i tried the same process on vista and XP, same result, the phone connects to the pc, and right as i try to load one of the ROMs from HTC's website, the thing crashes at 1% and says invalid vendor ID error.
IS there a universal ROM that can be loaded, or my phone is bricked for good?
Perhaps you want to have a look here: http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades
Succes!
Oh wow this place has every ROM type but mine, so not fare, u think if i download and try every one of these other ones I might have some sort of luck?
I used HTC's MTTY and figuered that My CID is HTC__017, and the 1.93 Spl
and mine is not listed there.
Hey, I have the EXACT same problem. My diamond is the US 3G Unbranded phone (DIAM110, CID=HTC__017). I've both called and emailed HTC asking for the ROM, but they say that they do not have it. The only way to get it would be to request it from the vendor you bought it from. I got mine as a gift so I can't really do that. Oh, and if you want them to flash it for you, you have to pay like $160. Not cheap. And you know HTC, they'll make up that your main board's fried, and ask you to pay $300. If you have WARRANTY, send ASAP. Mine expired a week ago.
As for flashing random ROMs, most likely this will not work (although you can try). The way your phone determines if it's allowed to install the ROM is by looking at the beginning of the file. If you open up the NBH with an editor, you can see and even change the ID. The problem is, HTC "signs" the file with a 2048 RSA key (2^2048), and if you even change one digit then the signature will be invalid.
So yes, I have the exact same problem, my thread is at: http://forum.xda-developers.com/showthread.php?t=623320, so if you have any luck, or I do, check out that thread.
At this point, the only things that are left to do are to beg HTC or a vendor for the ROM update (I might find HTC developer's mailing address and ask them); find a way to get into Soft SPL, or in other words load into memory a bootloader that would allow flashing of unsigned code; or find a vulnerability that would allow flashing unsigned code (has been done with Trinity).
Also you can try contacting Olipro, cmonex, and pof, but I so far have had no luck.
Hopefully we'll find something.
~codeslicer
Hey man, thanks for the reply, we are pretty much on the same exact boat, am gonna try to contact HTC see if my warranty is still up, and the phone i got it as a gift, I don't have a recipt of a proof of purchase, what do u think i should tell them. And if that doesn't work, I think I am going to try every single 1.93 ROM
in this site.
http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades
And also what is your CID. if its HTC_017 then its not here, but there are a lot of them in here so u might get some luck.
let me know how it goes man.
I think i have the solution
can u please confirm clearly as what has happened , hope i have the specific solution .
Related
I very much want to upgrade my O2 Orbit Rom to either WM6 or the B&B developed by Tom. Right now it apparently does not have the UK WM5 on it; according to the Ebay seller I bought it from I would have to go to the Hong Kong site to get an "official update" but the seller claims it would be better not to do so as people are reporting losing their radio and bluetooth. So I have read and re-read through these threads. I hear stories of phones not working after being flashed so I want to be super cautious. Here is what I think I do:
1. Run USPL and wait 5 - 10 minutes until the computer reboots itself.
2. Run either RUU for Tom's B&B or run RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
for the UK WM6 upgrade.
And I should be upgraded, right?
If I end up with huge problems, I think I can revert back to the original factory ROM with the file called:
Arteimg.nbh
But how do I run a nbh file?
Which OS is least likely to cause problems?
Please be gentle with me - I'm a 51 year old woman who is in love with my Orbit and can't live without it so I don't want to take any chances to turn it into a brick. On the other hand, I'd really like to have WM6 and can't get it from the UK d/l site because my S/N matches the Hong Kong site. I live in the US and I'm not sure if I want a Hong Kong OS. I have honestly read through these forums and tried to get all my answers here .... but I just want to double check before I make a big mistake and blow up my phone. Thank you all.
Cinamon said:
I very much want to upgrade my O2 Orbit Rom to either WM6 or the B&B developed by Tom. Right now it apparently does not have the UK WM5 on it; according to the Ebay seller I bought it from I would have to go to the Hong Kong site to get an "official update" but the seller claims it would be better not to do so as people are reporting losing their radio and bluetooth. So I have read and re-read through these threads. I hear stories of phones not working after being flashed so I want to be super cautious. Here is what I think I do:
1. Run USPL and wait 5 - 10 minutes until the computer reboots itself.
2. Run either RUU for Tom's B&B or run RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
for the UK WM6 upgrade.
And I should be upgraded, right?
If I end up with huge problems, I think I can revert back to the original factory ROM with the file called:
Arteimg.nbh
But how do I run a nbh file?
Which OS is least likely to cause problems?
Please be gentle with me - I'm a 51 year old woman who is in love with my Orbit and can't live without it so I don't want to take any chances to turn it into a brick. On the other hand, I'd really like to have WM6 and can't get it from the UK d/l site because my S/N matches the Hong Kong site. I live in the US and I'm not sure if I want a Hong Kong OS. I have honestly read through these forums and tried to get all my answers here .... but I just want to double check before I make a big mistake and blow up my phone. Thank you all.
Click to expand...
Click to collapse
don't worry, just run the USPL tool, after running this tool, it will reboot your phone automatically... Than flash your phone with a WM6 rom or the B&B rom... And thats it... make sure you backup your contacts before you do the flash, cause it will wipe all your contacts from your phone.
If you don't like the rom you flashed, just run USPL again, and flash it with another rom or back to factory rom.
If you've got any probs, just let us know... there is a lot of wizards out here, who are willing to help. You also can pm me anytime. I'm glad to help if I can.
cheers and goodluck
Beat me to it coolGadget!!
Anyway if you want to see how the Arteimg.nbh is used read this:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
You'll need a SD_card to do it.
Good luck, but you wont need it as you seem to have done your homework and as co0lGadget says if you get stuck we'll give you a hand.
macguffin said:
Beat me to it coolGadget!!
Anyway if you want to see how the Arteimg.nbh is used read this:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
You'll need a SD_card to do it.
Good luck, but you wont need it as you seem to have done your homework and as co0lGadget says if you get stuck we'll give you a hand.
Click to expand...
Click to collapse
Hey Matt, good to see you here... I didn't beat you mate... cause I was pretty sure, Wizards like you will be very helpfull too ;-)
You Guys are the best!
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
Don't worry u need Only 30 minutes for update Rom.But remember need Run USPL by Pof.When your Phone have SPL 1.11 u can update any Rom u like..!
Cheers..!
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
I think you have enough time, the whole procedure takes less than 15mins.
No need to take out the card, just follow the instructions above.
Good luck!
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
No need to take the card out.
You probably do have time USPL take about 3 mins flash of ROM takes about 10-15
However these things are always best to do if you're not in a rush or desperate to get your phone up and running. Also if you put tom's b&b on you'll need about 30 minutes to just play with it
tom_codon said:
Don't worry u need Only 30 minutes for update Rom.But remember need Run USPL by Pof.When your Phone have SPL 1.11 u can update any Rom u like..!
Cheers..!
Click to expand...
Click to collapse
When your Phone have SPL 1.11 - just in case you're wondering this is one of the red numbers you see when the phone first starts up, but you probably already knew that.
Holding my breath
OK, I'm going to do it - soft resetting now. But before I take the plunge, will you wizards please tell me - will I have the least problems with the UK WM6 release (which I found posted here as I can't d/l it from the site) or Tom's B&B which looks very cool but seems to have caused problems for some people. I trust your judgement - please tell me what you think. And btw, even though I'm old I love gadgets and cool tricks, so TouchFlo looks awesome to me, unless it is going to cause problems when installing files etc as I've read here.
Cinamon said:
OK, I'm going to do it - soft resetting now. But before I take the plunge, will you wizards please tell me - will I have the least problems with the UK WM6 release (which I found posted here as I can't d/l it from the site) or Tom's B&B which looks very cool but seems to have caused problems for some people. I trust your judgement - please tell me what you think. And btw, even though I'm old I love gadgets and cool tricks, so TouchFlo looks awesome to me, unless it is going to cause problems when installing files etc as I've read here.
Click to expand...
Click to collapse
WM6 is ok but not that different from WM5 to look at and I guarantee that by tomorrow you'll have wanted to see what tom's rom is like and had to re-flash.
Since using toms rom i've been able to dump a lot of my third party software (mostly stuff from spb) and as you say it's very cool to looks at and will impress all your friends.
OK Tom's it is .......
Cross your fingers for me please ....
Postponing the Flash
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Cinamon said:
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Click to expand...
Click to collapse
Hi Interesting...!
Take care..!
Cinamon said:
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Click to expand...
Click to collapse
You probably has the WM5 bug or something. With the WM5 rom, sometimes it will mess up your sd card with folders in strange caracters etc...
But you're right, if you want to do this, and its your first time, you better do it when you're not in the rush... just prepare good, sit back and relax, and the flash will be good ;-)
I'm not sure if I'll be able to get online tonight... cause my internet is shut off since friday, my provider can't tell me where the problem is, and how to fix it... So I hope tonight after work, I'll be able to get online at home. And be able to help you out if needed... so fingers cross...
GoodLuck...
CoolGadget said:
You probably has the WM5 bug or something. With the WM5 rom, sometimes it will mess up your sd card with folders in strange caracters etc......
Click to expand...
Click to collapse
I've been watching this thread and sorry to hi jack the thread. But, this was one of my questions about updating ROMS from original WM5. I haven't gotten the phone yet (P3300), but I want to upgrade it to B&B when I get it. Should I run the patch for the card corruption fix before I do the USPL and ROM flash? Or just go strait to the USPL and ROM update?
I've been reading for a long time but I'm still not very clear on what programs to use to flash and all that. I also want to be able to store my original ROM just in case I want to revert back to OEM. How do I do that?
shawndh said:
I've been watching this thread and sorry to hi jack the thread. But, this was one of my questions about updating ROMS from original WM5. I haven't gotten the phone yet (P3300), but I want to upgrade it to B&B when I get it. Should I run the patch for the card corruption fix before I do the USPL and ROM flash? Or just go strait to the USPL and ROM update?
I've been reading for a long time but I'm still not very clear on what programs to use to flash and all that. I also want to be able to store my original ROM just in case I want to revert back to OEM. How do I do that?
Click to expand...
Click to collapse
who's your phone provider?
macguffin said:
who's your phone provider?
Click to expand...
Click to collapse
I'll be using it on T-Mobile, USA. The phone will also be purchased in the US.
BTW, Just to clarify, I'm buying the phone from an online store, so the phone will be unlocked. I'll have to reconfigure it to work with T-Mobile SMS and T-Mobile Web service.
Just run the USPL tool and then the rom of your choice.
If anything does go wrong you can get an original wm5 rom from here
http://rapidshare.com/files/17854890...0_wwe_ship.exe
If you brick your device just go into the bootloader screen and run this it will get you back to wm5 and you can try again.
macguffin said:
Just run the USPL tool and then the rom of your choice.
If anything does go wrong you can get an original wm5 rom from here
http://rapidshare.com/files/17854890...0_wwe_ship.exe
If you brick your device just go into the bootloader screen and run this it will get you back to wm5 and you can try again.
Click to expand...
Click to collapse
So I can't "dump" and store my own ROM? I have to download a dumped WM5 OEM from from someone else? I just wanted to make sure that I could put it back exactly the way it was just in case I needed to send it back or ship to HTC for repairs or something.
Also, will they be able to tell that the ROM was flashed and flashed back if I send it in for warranty repairs?
Hey..
I think in the moment there are many guys, out there, included me, that share the same problem: all probably unlocked their Dash's, Mail's or whatever using anykind of unlocking method (me, imei-check).
I am using a German MDA Mail, i needed to unlock it, in order to use it with my phone carrier apparently.
Now, the version of my phone is somewhat 1.18, and I want to update it to the WM6, like many others too. Both ways; SPL 1.11 and trying the update itself onyl lead to the same outcome : Invalid vendor/model id !
Many often say: yea, look in the CID unlock thread...well i did, very often, but there is no real solution to that problem, since basically, my Dash is unlocked, and presumably also CID unlocked since i got that from imei-check, which i think is a pioneer in that sector.
So, after all, what can we do!? Is it possible to still trying update that phone?
Hope we can find a solution, cuz i dun feel i am the only guy who has that problem.
I may have the same problem. Are you trying to unlock on Vista or XP?
I got it unlocked on XP, it worked fine i got to admit, no problems at all, my phone now seems to be unlocked and it works with another phone carrier, apart from T-Mo, which should be an indication FOR the CID unlock...
I dont think it is important to App unlock the Mail as well, cuz imei-check said it would be included...soo, would it be reasonable to ask imei-check, or does somebody else have an opinion about that?
I just upgraded to WM6. Here's what I did.
Unlocked it from imei-check. Ran SPL Upgrader. It gave me a Vendor ID being incorrect error.
Then I ran the WM6 upgrader from HTC. It upgraded and rebooted.
Now my phone is running WM6 and everything is fine.
Ha? you serious, thats very cool...well i tried it again with the spl upgrader, he went to 100%, aborted then with an invalid model error...then ran the upgrade afterwards, still didnt work... what about the version, did u take the German or the English one!?
Aaaargh, i am about to freak out..why doesnt it work, both SPL and the WM6 Upgrade give Invalid model errors, before i at least got a invalid vendor id, but not even that anymore...HELP...did imei-checks unlock didnt really work or what...
Yeah, I am very serious. I am using WM6 right now. I have a Dopod C720w.
Ok, here's what I did.
Unlocked through IMEI-check's software.
After that, I ran the SPL Upgrader. It went to 100% then gave me an Invalid Vendor ID error. I exited from there and then ran the HTC WM6 upgrade rom program. That started and slowly went to 100%. It said it had finished its job, so I removed my phone from the cable.
Then I proceeded to totally freak out because my phone looked like it was stuck at the Windows Mobile loading screen. I waited and after a long time, the rom initialised and ran through its first boot sequence.
Now its working perfectly and everything feels a bit faster.
If you went through the exact same steps, then I am not sure what your problem might be. Sorry. To tell you the truth, I am a completely noob at this who just did random steps and was lucky enough for it to work
P.S. I used the WWE (English) version, as I can't read German. I downloaded it off a rapidshare link posted in the big thread about HTC's rom release.
Well, i might not have much more skill either, but it is still quite worrying, is there maybe a difference between model and vendor id !? i am not quite sure what to try anymore, i remember yesterday, that i had a wrong vendor id as well, but today i just always got invalid model ids...very weird...well i will continue trying..do u remember what ur MDA mail version was before u updated it..sth like...1.18 !? by the way, which SPL upgrader are u using?
I am not using a MDA Mail. It's a Dopod c720w, same hardware, different branding.
This is the SPL Upgrader I used:
ftp://xda:[email protected]/smartphones/Excalibur/RUU_Excalibur_SPL-1.11_UpgradeOnly.exe
Try with that. It should work.
I think my version before upgrading was 1.15 something.
Nah, i think its the same SPL Upgrader (same size...) but i just dont get the idea why it doesnt work, some experienced upgrader here who can explain us the process?!?! I am not sure whether a reset of all settings would do a thing?! geez feel quite helpless in the moment^^
I had the same problem
but the only thing I did when got those problems was leaving my Vista based laptop and try with an XP based, downloaded the activesync, connected my htc, installed the SPL (downgrade) and then the WM6 WWE ROM, oh, I remember, first I installed the german version by mistake, so I had to repeat the process with the SPL before applying the correct ROM again.
When I was unlocking my HTC, I had some problems on the vista system, and I deactivated the antivirus... Could that be related?
Good Luck!!!
You haven't answered as to whether you're using XP or Vista. I ran into the same issues trying to do the SPL and ROM updates via Vista, when I tried it on my XP system -- both worked without errors.
vivid22 said:
Nah, i think its the same SPL Upgrader (same size...) but i just dont get the idea why it doesnt work, some experienced upgrader here who can explain us the process?!?! I am not sure whether a reset of all settings would do a thing?! geez feel quite helpless in the moment^^
Click to expand...
Click to collapse
Yeah, after hearing so much about Vista, I used my XP system to update the rom. Worked fine.
i LOVE imei-check, i wrote them an email a moment ago to ask them for support, they replied me after 10 minutes with a full strategy how to encounter the problem, fabulous support i gotta admit, here's what they said:
Hello,
It sounds like you try to make a CROSS-MODEL-ID update (e.g. WiFi chip missing T-Mobile ROM on a WiFi enabled HTC device).
EVERYTHING IS POSSIBLE. You only have to use SPECIAL INSTRUCTIONS in order to make a CROSS-MODEL-ID update:
*If you REALLY do it EXACT step by step like described you will have no problems*
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/
- the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use:
"Hex Edit with Hex Workshop" from conext menu Search for word
"BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C
==> replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message:
"Data Crashed, contact service provider" (!NO PANIC!)
==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again).
In case you have problems please indicate the step number/letter which is not clear/not working for you.
*If you REALLY do it EXACT step by step like described you will have no problems*
Click to expand...
Click to collapse
P.S., would be a good idea to post this as a sticky, since it really explains how to update a original HTC rom on such wifi lacking Excalibur versions like the MDA Mail,
greets and good night
Did you try to email imei-check?
I know that exactly the same problem occurred when the T-Mo WM6 came out.
Imei-check had sent back their customers who were not able to upgrade a procedure how to modify their unlocker with a hex editor to change the model ID.
BTW: Model ID: there are two different models - EXCA100 and EXCA200 - take a look under your battery - german XDA Cosmo for example is EXCA200 (there the SPL seems not to work)
The other thing is the vendor ID. This seems to be solved by pof's Upgrade SPL 1.11
So simply try to write to imei-check and say that your unlock does not work - in the past they were very customer friendly - hope this didn't change meanwhile
EDIT: OK - vivid was a little bit faster - next time I should refresh the thread before I answer...
FYI !!
saw some post where people was being impatient during the upgrading process and completely abort the process ...etc
you are supposed to be at the logo screen for a period of time ... it doesn't meant it's hanged ... be patience !
just a note
Patience is the key...
Hm, OK, I did it... I bought the fracking UNL, took me one hour to figure how to get rid of the protection (security + antivirus) in my laptop that did not allow me to run the unlocking app. Finally, I got it.
First time I flash the ROM it did not work. I tried using first the SPL, and it worked nicely. After that, I could flash the ROM. Be patient, it takes some minutes to reboot, and it looks like is freezed, but not... wait!
Can´t see much difference from WM5, but I noticed a best performance in wifi connection. Now I´m fracking installing all the goodies I had before... bluetooth keyboard is not working... I will work it out a little bit.
Just in case, if someone wants the UNL for research... PM me.
I am glad it all worked out for you. Didn't know that the MDA Mail came without Wifi.
Wow, I must say, I am glad I used Imei-Check's service as well. That was an extremely helpful reply they sent you. Not seen many companies who do that.
That's exactly what i thought
Maybe we should write them a thankyou email for all their great help in name of the whole xda-developers community what u think
Anyhow, can somebody explain me real quick what should be definitely be installed to WM6?
@PhoenixAG: yeaa stupid T-Mobile GER...they didnt take away the wifi chip on the S710 or the newer ones, have no idea why they did it to the Excalibur then..
It would be a good idea to stick this solution.
I think many users in this forum have exactly the same problem in doing a cross model ID update. You can see Excalibur devices from many countries and carriers here.
I have a T-Mobile MDA Mail too which lacks the Wi-Fi and had to do the same steps after cid-unlocking it through imeicheck.
You have to do it really step by step. I had problems in doing it out of my memory for the new HTC ROM and wondered why it failed. But going through it step by step really works EVERY time I did it and thats now the third time.
First was installing T-Mobile Dash WM6 ROM, second the Russian HTC ROM and now finally the German HTC WM6 ROM.
I cannot flash my Diamond with a new ROM. I have tried using HardSPL versions 1.23, 1.24, and 1.34,and various ROM's but with no joy.
I have done a hard reset on my phone and setup an active sync connection with my PC. I then run HardSPL, which I get the screen with 4 colours on my phone and then get the progress bar displaying 0% on my phone, but doesn't get past that, the program times out with a communication error.
When I take out and replace my battery my phone still works fine.
Please can anyone give me advice.
Thanks
same here.
ROM 1.37.401.3
radio 1.00.25.03
WWE
paul_32 said:
same here.
ROM 1.37.401.3
radio 1.00.25.03
WWE
Click to expand...
Click to collapse
Dito for me!
Saw this coming
Indeed, not a surprise to see another thread opened by newbies.
Partly (small part though) we might point the finger at the HARD SPL creators and the Chefs.
Too many ROMS with sometimes confusing "signed" or "non-signed" versions (and this is for you newbies) WHICH NEED A DIFFERENT HARD SPL.
Unsigned and Signed ROMS can not be flashed with same SPL guys .
So, start readin these threads about the ROM you want to flash profondly and use SEARCH.
In a few weeks, you'll have to write this message to newer Newbies again.
Maybe I better ask a MOD to close this thread though
Look here ! The solution is near
Just an example how you will feel in a few minutes
http://forum.xda-developers.com/showpost.php?p=2420277&postcount=125
ceevee369 said:
Indeed, not a surprise to see another thread opened by newbies.
So, start readin these threads about the ROM you want to flash profondly and use SEARCH.
In a few weeks, you'll have to write this message to newer Newbies again.
:
Click to expand...
Click to collapse
The problem is: We get a connection error a while after the black screen during the hardSPL procedure. And the SPL is not updated...
So if you know what the reason is that the device wouldn't enter SSPL automatically (JumpSPL.exe 0x800000 sspl-1.01-reloc-mod.nb)? Mine didn't respond! I try to used another USB port but …same problem!
I tried to run " JumpSPL.exe " directly from the diamond... then the screen turned black (backlight still working good but the whole screen is black)
Thx for your answer!
Well, I had the same problem, and managed to work around it! First of all, I have NO idea why all of a sudden my Diamond would stop going into bootloader mode by itself - instead, all I get when trying to flash is a screen which fades to black, and then eventually the comm error after 5 minutes, with the option to go into recovery mode.
This is what works for me: first of all, make sure you have the right HardSPL for what yoyu need to do. Either flash the one for the signed roms (and the only try to flash signed roms) or flash the one for unsigned roms (and then only flash unsigned roms). But how to flash if the screen goes black and you do not get a connection?
Well, what works for me (and it may not work for you - try at your own risk!), is to put the phone in bootloader mode by holding the -Volume button and doing a soft reset, and then connecting it to the USB cable of the PC. When the lettering in the white part changes from Serial to USB, you are ready to go, and - at least for me - the flashing works.
Don't ask me why, but this is what I did last night to put the .05 radio on my Diamond.
ceevee369 said:
Indeed, not a surprise to see another thread opened by newbies.
Partly (small part though) we might point the finger at the HARD SPL creators and the Chefs.
Too many ROMS with sometimes confusing "signed" or "non-signed" versions (and this is for you newbies) WHICH NEED A DIFFERENT HARD SPL.
Unsigned and Signed ROMS can not be flashed with same SPL guys .
So, start readin these threads about the ROM you want to flash profondly and use SEARCH.
In a few weeks, you'll have to write this message to newer Newbies again.
Maybe I better ask a MOD to close this thread though
Click to expand...
Click to collapse
Thanks ceevee369 it works fine for me now
I still cannot get a new ROM on my diamond. When I said it worked above that was only getting HARD SPL on my phone.
When I try to update the ROM it gets to 100% and then says the ROM is corrupt. I have tried with different ROM's and I get the same error
creation said:
I still cannot get a new ROM on my diamond. When I said it worked above that was only getting HARD SPL on my phone.
When I try to update the ROM it gets to 100% and then says the ROM is corrupt. I have tried with different ROM's and I get the same error
Click to expand...
Click to collapse
Could you please give the UNSIGNED developers SPL a try?
You only used he Signed version ones as you wrote in 1st thread, and as far as I can feel, you try to flash unsigned ROM's maybe?
Hope you're not bricking your device soon.
Did you posted in the specific ROM thread a specific question on the hard SPL you use vs. The ROM you intend to flash?
Yes, bootlader will always start, but no, it won't go further than giving you an error if no compliant Rom is used.
ceevee369 said:
Indeed, not a surprise to see another thread opened by newbies.
Partly (small part though) we might point the finger at the HARD SPL creators and the Chefs.
Too many ROMS with sometimes confusing "signed" or "non-signed" versions (and this is for you newbies) WHICH NEED A DIFFERENT HARD SPL.
Unsigned and Signed ROMS can not be flashed with same SPL guys.
So, start readin these threads about the ROM you want to flash profondly and use SEARCH.
In a few weeks, you'll have to write this message to newer Newbies again.
Maybe I better ask a MOD to close this thread though
Click to expand...
Click to collapse
The majority of these "help me" posts wouldn't be necessary if the information on this forum was a little more accessible - and seriously, the search engine returns so much dross that it takes an age to gather all the relevant info about roms, spls, flashing, cooking etc, etc. And yes, modmydiamond.info is a cool site but the info there is basic at best.
I'm not knocking the work being done here as it's seriously good - I'm a techie from way, way back, so I can appreciate the amount of effort involved - however, you guys make a rod for your own back by not producing documentation that is more explanatory (or just there) to start with.
And yes, I can also appreciate that you're a bunch of dudes doing this for free and for the love of it and not a bunch of technical writers getting paid for your work but you have to try to understand what a newbie is faced with when they arrive at this site looking to upgrade their pride and joy. Confusing and contradictory are two words I'd use.
Peace.
Ade
PS. ceevee369, the "you"s above weren't necessarily directed at you.
Everytime I'm trying to Hard-SPL my phone disconnects and tryies to install a device called "Qualcomm CDMA Technologies MSM" but doesn't find a driver for that. So there is no connection left between the Phone and the PC and it doesn't work anymore...
Can anyone look if that device is installed on his PC? And if possible upload a driver for that?
Found a way to solve the problem:
Go into bootloader-mode (volume-down + reset) and then connect to the PC. If Win is looking for the drivers you will find them in the folder where ActiveSync was installed. Afterwards you should see "usb" instead of "serial" in the screen on your XDA.
Now soft-reset and proceed as told everywhere...
So my problem was that Win Didn't finde the drivers automatically and i didn't know where to look for them.
ceevee369 said:
Could you please give the UNSIGNED developers SPL a try?
You only used he Signed version ones as you wrote in 1st thread, and as far as I can feel, you try to flash unsigned ROM's maybe?
Hope you're not bricking your device soon.
Did you posted in the specific ROM thread a specific question on the hard SPL you use vs. The ROM you intend to flash?
Yes, bootlader will always start, but no, it won't go further than giving you an error if no compliant Rom is used.
Click to expand...
Click to collapse
Its working now, I used the unsigned SPL. Although when I was using the signed SPL I was trying to Flash ROMs that had been sigened.
Like the title says this is my virgin flash. So what do you guys think should be my first ROM? I've looked at a bunch.
Looking for stability and style.
Just to get this correct I need to unlock my phone even though it's att and I'm using att. (Should I just unlock the CID or both)
Then I need to install HardSPL 7.1?
Then flash the ROM I choose.
Then load APPS as needed?
Thanks for the help!
Hardspl v7 http://forum.xda-developers.com/showthread.php?t=296722
I would unlock and supercid http://forum.xda-developers.com/showthread.php?t=293665 then I ran hardspl again just to make sure, because unlocking changes the bootloader.
Then you should be good to go. Hardspl will help you in case you get a bad flash or bad rom, it's easier to recover. Supercid will allow to flash unsigned code (custom roms).
Looks like your on the right track, I'm just not sure where you got v7.1 for hardspl? That's why I included the links.
Also, "any rom you choose", but only from the Hermes forum. Flash a rom for another device means instant brick and you may not be able to recover it.
Hard SPL is a safety net only, there are NO guarantees you won't end up with a permanent brick, Hard SPL or no...
Most times you have to do something REALLY dumb to end up with a total brick but there is a miniscule chance, especially if you are playing around with the radio rom.
Happy flashing...
It was late last night and I couldn't remember if it was 7 or 7.1 lol. I'm charging the phone now. Gonna make sure it's nice and full then I'm gonna give it a shot. Thanks to you both for the help. I just needed to hear I was going about this the right way. I think I'll try one of Schaps ROM's first then try one of Josh's and see what I like about each. I've only got about 50 pages in on each so I'll read alittle more while the phone is charging. Thanks again!!
Oh wanted to ask also is there a Page or sticky just for Apps, skins, themes, and such or do I need to know what I'm looking for and search it?
Dang I thought my other phone had a microSD card in it.....turns out it's M2. Guess I'll stop on the way to work to pick one up. Non SDHC 2gb or less! Another question when it states now copy this to your phone....What file do I copy it to? (I'll head back to the Wiki and see if I can find that myself but figured I'd ask).
copy the RUU_signed.nbh and rename it hermimg.nbh the exe file is the flashing utility, and you don't need it if your flashing via the sd card.
make sure the card is formatted as fat32 (not fat).
Ok I did it the RUU way without the SD card. I'm now at 2.10.01 so I'm good. Now off to work and will hit the unlocker next. Thanks for the help!!
Ok unlock has been completed now I'm going to run Hardspl again. What about the radio I see that is has changed. Should I change that back to what it was at some point?
Ok I've done my first ROM flash wow! I grabbed Schap's WM6 Pro 4.31. I'll try it out and see if I like it. If not try another. Thanks again for helping me thru!
If you wish to risk changing the radio, do so but only if theres a problem. If the radio rom flash is interrupted, you will almost certainly have a brick on your hands.
Use the sd card method to flash so you then minimize the amount of problems you may have.
Remember though, if the radio rom is working fine, don't touch it....
Cheers...
boog321 said:
I would unlock and supercid http://forum.xda-developers.com/showthread.php?t=293665 then I ran hardspl again just to make sure, because unlocking changes the bootloader.
Click to expand...
Click to collapse
Hard-SPL makes your device appear as SuperCID... it's all you need.
vp3G said:
Hard-SPL makes your device appear as SuperCID... it's all you need.
Click to expand...
Click to collapse
Ah, cool! Thanks, vp3G! I guess I took all the info wrong. Reading the 2 threads it wasn't clear. I guess my method worked though! haha
Yea, it's all quite confusing... Hard-SPL ended up negating the need to use pof's unlocker. Olipro is a friggin' genius (as is pof).
So all I needed to do was Hardspl and I would have been good to go? I have another hermes I'm doing for myself. I do find I'm not getting very little service if not none at all in the house. I use to get 3 or 4 bars. Should I change the radio? Does the radio change with each ROM loaded?
You can try going back to the radio that you originally had, just do it the sd method to minimize the chance of something going wrong.
You could compare the difference between the 2 hermes.
vp3G said:
Hard-SPL ended up negating the need to use pof's unlocker).
Click to expand...
Click to collapse
True, but if you wish to sim unlock then you still need Pof's unlocker.
I have to admit I'm getting there myself LOL. It really isn't that hard after you do it the first time. Some things I got stuck on (Pure newbness).
Some ROMs are compressed with .rar and .7.....I found you must download a unzipper/compressor to extract the files you need. I used Winrar some use 7zip. I'm getting there. There is soooo much info on this site. You find that you search for an answer and you get a page of answers with 3 different ways to do it LOL!
We have all been there at one point, too!
When I first brought my hermes home and it was still locked to the at&t network, I was so worried I was going to break it.
Lots of reading, and lots of tinkering later, and I am working on my own rom. Granted, I didn't port it, but I have done so much tweaking that I don't think anyone could tell where it came from.
Funny thing is, I still keep learning so much more. I think it's like my other hobby, ham radio, I don't think anyone can try everything! It seems to go on and on.
Ya know you gotta love the internet LOL. I've learned about so many things (mostly due to them breaking lol). Here's another question for you guys. For those who have Josh's 6.1 ROM. Where is the lock unlock button??? I see the lock device setup for password protection but I don't see a regular lock the screen so I don't make but calls button. LOL I'm gonna try to load his S2U2 thing when I figure out how to do it.
You can add device lock to the today screen under settings>today (at least it should be there), but if your using manilla I don't have a clue lol
I tried to update my rom...now it gets to the windows mobile screen and hangs.. I can get it into bootloader screen.. The problem is i cant find an original rom to go back to.. my info was..
dopod p800w
rom 129.706.11chs
11/07/07
02.84.90
4.1.12.38
ext rom 1.29.706.111
Now in bootloader it says IPL 129.0001
SPL1.11.0000
usb will show up but not the thing in the upper right corner..?
Im a newbe and decided to jump in after seeing all the good luck that everyone has had..
Can anyone help..
new info..
I can get to bootloader screen hook up the usb and even synk with active synk 4.5 but as soon as i try the start uspl or the ruu my phone disconnects.
This is starting to drive my wife nuts ive been on the comp 4 about 18hrs in two days trying to figure this out...
should i just send it in to htc and have it reflashed???
Any ideas???
Found this for Dopod P800W
http://rapidshare.com/files/42891918/P800w_SEA_ENG_WM6_Upgrade_20070713.zip, if it has pass i think it is kastibong
Don´t know if it will help you.
Thanks ark 666,
If i have heard right i need to flash back to the chinese (chs)
then once im back to original i need to iemei unlock then i could use the rom in the link that you provided..Am i right??
thank you for taking the time to respond to me, I know you guys are well beyond us newbes and it can drive you nuts with the same old questions....
some of us really do appreciate it.
crazy4chevs said:
Thanks ark 666,
If i have heard right i need to flash back to the chinese (chs)
then once im back to original i need to iemei unlock then i could use the rom in the link that you provided..Am i right??
thank you for taking the time to respond to me, I know you guys are well beyond us newbes and it can drive you nuts with the same old questions....
some of us really do appreciate it.
Click to expand...
Click to collapse
Try this wwe rom, is for the same region as your device, with cht support, if this doesn´t work then wi´ll try to arrange the Chinese one.
Cheers.
Man, I thought i had it.. It finally went to the ruu on the boot loader screen started to update and got to 2%....
This is what it said
ERROR (244) : INVALID MODEL ID
This update utility cannot be used on your PDA phone. Please check your update utility click to exit..
DPRRH<68-ASVH55670-DPRRH568-ASVH5/01*
at least i got to see the ruu on the corner of the phone this time.
Any ideas what to do now?
I arranged this rom "P800_CHT_3.7.709.1 chs cust", i think it´s this one, it´s the most recent, , for p800w.
Though this one is CHT, CHS customized.
akk666,
Do you have a link for the rom in the last post?
maybe i could pm you so this post dosnt get to long..?
What do you think of this.....
szlcdn_p800_wm6_chs_1023.nbh
found it from here...
http://translate.google.com/transla....9966.org&hl=en&rls=RNWO,RNWO:2008-20,RNWO:en
what do you think??
Try it, maybe it´ll work.
http://www.4shared.com/file/111733762/5c488ad0/P800_CHT_377091_OS_CHSCust09.html
Havent quite figured out how to change out the nbh in the ruu to get either of those to load like complete ruu..
Is there a program that makes this more idiot proof to change the nbh?? That would be nice.
Type nbh in.. it takes you right to it highlighted, then it has you copy your new one and paste in a command line then asks if you want to replace it..
Man thats what sucks abt being a newbie is that it takes sooo long to figure things out 3hr 20 min and still at square one..
lots of links though
crazy4chevs said:
Havent quite figured out how to change out the nbh in the ruu to get either of those to load like complete ruu..
Is there a program that makes this more idiot proof to change the nbh?? That would be nice.
Type nbh in.. it takes you right to it highlighted, then it has you copy your new one and paste in a command line then asks if you want to replace it..
Man thats what sucks abt being a newbie is that it takes sooo long to figure things out 3hr 20 min and still at square one..
lots of links though
Click to expand...
Click to collapse
U could write it in chinese, that i would´ve understood the same.
Nothing.