Sorry, forget to check other thread
Checking now...
----------------------------------------------------
Hi,
My XDA screen can not use anymore, but I still want to use it.
Anyone know how to skip screen alignment after updating the ROM.
Or if someone could help to make new ROM with remove align screen is much appreciated. I am willing to donate
Thanks in advance.
totuta said:
Sorry, forget to check other thread
Checking now...
----------------------------------------------------
Hi,
My XDA screen can not use anymore, but I still want to use it.
Anyone know how to skip screen alignment after updating the ROM.
Or if someone could help to make new ROM with remove align screen is much appreciated. I am willing to donate
Thanks in advance.
Click to expand...
Click to collapse
create an empty file naming welcome.not and copy to your SD card. Now reset your device and wait...
ps. Place the SD card to your device before reset.
tankx tankx tankx i was looking fore a way to skip tried hounder's of ways to solve it this is the only working way finely after 2 weeks
please help screen alignment
i have flashed tomal 8.9 but my screen does not alighn I am stuck at screen alignment.
tomal said:
create an empty file naming welcome.not and copy to your SD card. Now reset your device and wait...
ps. Place the SD card to your device before reset.
Click to expand...
Click to collapse
I assume this is not working to you right?
Please explain more
Hi guys,
After I installed Tomal 9.0 rom, I also get stuck in calibration step.
I do the "welcome.not", but now I can not align the screen.
Using the screen is very hard, because I miss the icons that I want.
With 8.9 I noted some erratic behaviors, but it works +- fine.
It´s a hardware problem?
If not what should I do? reformat?
Thanks
Yes, probably the best thing to do is Doc format and then reflash
Or you can remove the welcomehead.not from sd and do a hard reset....
alignment screen
sir i am also sufferng from dis afterboot alignment problem........
i have got universal...i updated it with wm6.5 byluca.....nw its stuck in alignment.........
sir pls elaborate.....
how to create welcome.not file......
wich sdcard 2 use......
(pls help me with step by step guide.....)
thanks.....
pizza_sh said:
sir i am also sufferng from dis afterboot alignment problem........
i have got universal...i updated it with wm6.5 byluca.....nw its stuck in alignment.........
sir pls elaborate.....
how to create welcome.not file......
wich sdcard 2 use......
(pls help me with step by step guide.....)
thanks.....
Click to expand...
Click to collapse
Hi!!
I just make a new text file(in PC) rename it (welcome.not), and copy it to the root of the SD card, sof reset and he "works", but still have the problem about accuracy
Good luck!
but i do not have the memory card reader right now... is there any rom out here which comes without this option.. .ie to align the screen ..
No, all the ROM´s come with align screen as default
get an SD!
excellent, worket perfectly on my touch hd. created a new text document (.txt file) on my pc, renamed it to welcome.not (it's not a txt file anymore) and copied that to my sd card! worked like a charm
Glad to know it works for other devices and not only for Universal!
it worked for me... thanks
it worked for me... thanks
please help me. I tried the solution of wlcome.not in my SD and in the memory of the phone but it doesn't work.
can anyone helme??
Ryan_83 said:
please help me. I tried the solution of wlcome.not in my SD and in the memory of the phone but it doesn't work.
can anyone helme??
Click to expand...
Click to collapse
You've tried to hard reset the device
tomal said:
create an empty file naming welcome.not and copy to your SD card. Now reset your device and wait...
ps. Place the SD card to your device before reset.
Click to expand...
Click to collapse
thank u. thank u.
Related
Hello all, best wishes for all of you.
I am new on this forum and read many stuff here allready. However i didn't find a real solution yet for my problem to get cab-files installed, f.e.:
I'd like to install Gyrator 2 on my HTC Touch HD (UK) (And other software)
When i try this i get this error:
"The file "gyrator" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file".
The same message occures when i try to do this with other cab-files. GSen was going fine and even CabInstaller did. Net Compact Framework 3.5. installed and ROM version: 1.14.401.3
I copied the cab-files from PC to PPC by dragging it into the Storage Card.
I would really appreciate your help, because im goin' nuts!!!
Tia ....
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
BlackMonkey said:
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
Click to expand...
Click to collapse
Didn't work either ... A hard reset? Uhm .... Don't like that, i hope and will wait first for a solution ...
patterns said:
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
Click to expand...
Click to collapse
As said it is not only Gyrator but it occures with more cab-files. The rotate is not my only goal, therefor i surely could use Gsen, but Gyrator 2 cn do much more. The same with other 3rd Party's ...
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Problem SOLVED!!
AllTheWay said:
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Click to expand...
Click to collapse
Problem solved! The way i used CabInstaller was wrong. Instead of open the CaBinstaller first and then adding the cab-file and destination path, i double clicked on the cab-files first and then it won't work, because i gave CabInstaller permission to take over the control of installing cab-files
Thank you anyway for thinking with me ..
Great to hear you solved your problem!
<off-topic>Could you please change your subject in the initial post? subject is supposed to describe what the thread is about like "unable to install CAB files" or something like that...thanks<off-topic>
hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
try to change rom or hard-spl...maybe is rom related
if nothing works i think you have to format your internal memory to do this soft reset then press volume down and the central button of the d-pad and press down..
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
veli4ko said:
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
Click to expand...
Click to collapse
maybe...if changing it doesn't help i think you have bricked your phone...and there is only a solution...bring it back to htc
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
veli4ko said:
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
Click to expand...
Click to collapse
i was meaning bring it back to the service...
veli4ko said:
hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
Click to expand...
Click to collapse
Hy veli4ko here is HardSpl
To veli4ko
here is a Stok HardSpl
To veli4ko
1. Solution :
- On smartphone: press volume down and reset simultaneously to get the boot mode. Once you made that follows the instructions on the screen.
2. Solution :
- Possibly you do not succeed the first step to obtain a version of HardSPL Diamond, copy the file there. ROMUpdateUtility.exe nbh and running the phone connected to PC and a loader.
Good luck and more attention next time !
thanks
DjMaryuslive but that won't solve the problem... when i put it in boot mode i saw that i were with hardspl 1.93 and the i swich with stockSPLs_htchackerssign.zip in the ROMUpdateUtility.exe
and then i make hard reset but problem is still there... i don't know what to do... any more ideas
Hi,
is there a way back to Windows mobile after NAND installation of android. Need instuctions.
thanks,
t0nNe
tonne99 said:
Hi,
is there a way back to Windows mobile after NAND installation of android. Need instuctions.
thanks,
t0nNe
Click to expand...
Click to collapse
I think you've missed the sticky...
http://forum.xda-developers.com/showthread.php?t=680518
It also explains how to get back to WinMo.
Hi,
I think I followed all instructions to switch back to WiMo in the sticky thread.
For a second the display shows a screen with four colours:
KAIS130
SPL-3.28.0000
CPLD-8
Then the screen turns to grey showing:
Loading ...
but nothing else happens.
Data on my sdcard:
KAISDIAG.NBH form the sticky thread
KAISimg.nbh (renamed RUU_signed.nbh) form rom file from this thread:
forum.xda-developers.com/showthread.php?t=379554
Do I have the right files on my sdcard?
My phone: T-Mobile MDA Vario III
Any suggestions?
thanks,
t0nNe
Thats not a stock WM rom, I'd recommend looking for Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.exe
That is the last HTC stock rom, and should flash either from Bootloader using USB, or by extracting and renaming RUU_Signed.NBH and flashing by SD card.
Note that it is safest to Format the SD card before copying files and flashing, just to make sure that there are no other files or folders that could possibly confuse things.
Things to check, if using bootloader and USB, make sure you remove the SD card first. Before you enter bootloader unplug the usb cable too, now camera+power, the bootloader screen should display 'Serial' on the bottom white area, after this plug in the USB cable, it should now say 'USB', once this is showing run the file above and plunge you back into the hell that is WM
For SD card method, make certain that only the KAISimg.nbh file is on SD, and when you enter bootloader mode note that it may take a little while to read and check the NBH, since it is around 100MB, so be patient.
Hi zenity,
I deleted the KAISDIAG.NBH form my sdcard and took the renamed ruu_signed.nbh from mda-vario.exe from german t-mobile site.
Now it works fine.
Thank you for your support.
t0nNe
This happened to me last week. I wanted to check how WM used to look on the Kaiser, and I got into the same issue...
Man, WM on Kaiser looks terrible! Android is much faster and more usable than WM, even with the latest ROMs.
I'm not saying that WM is not a capable OS, it's just very hard to use on a small screen. On my HD2 at least, it runs quite fast to compensate for any aesthetic issues
tonne99 said:
Hi zenity,
I deleted the KAISDIAG.NBH form my sdcard and took the renamed ruu_signed.nbh from mda-vario.exe from german t-mobile site.
Now it works fine.
Thank you for your support.
t0nNe
Click to expand...
Click to collapse
Glad I could help, and it's a good thing to have that file if you ever decide that WM is not as much fun as Android, ( I give it a week maximum before you reflash ).
hello devs,
tonne99 said:
For a second the display shows a screen with four colours:
KAIS130
SPL-3.28.0000
CPLD-8
Then the screen turns to grey showing:
Loading ...
but nothing else happens.
Data on my sdcard:
KAISDIAG.NBH form the sticky thread
KAISimg.nbh (renamed RUU_signed.nbh) form rom file from this thread:
forum.xda-developers.com/showthread.php?t=379554
...
Click to expand...
Click to collapse
my KAISER is:
KAIS130
SPL-1.94.0000
CPLD-8
zenity said:
Thats not a stock WM rom, I'd recommend looking for Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.exe
Click to expand...
Click to collapse
where can i find a stock ROM? could you give me a link for Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.exe
tonne99 said:
Hi zenity,
I deleted the KAISDIAG.NBH form my sdcard and took the renamed ruu_signed.nbh from mda-vario.exe from german t-mobile site.
Now it works fine.
Thank you for your support.
t0nNe
Click to expand...
Click to collapse
or a link for mda-vario.exe
thank you very much...
zenity said:
... only the KAISimg.nbh file is on SD...
Click to expand...
Click to collapse
hımmm...
i think it's ok...
i'm waiting
i'm so excited
i want to donate to you zenity
but i don't know how to donating...
Hey guys does any of u have any cab autoinstaller to SD card ?
I tried SASHIMI but it doesnt support mini resolution
Forget it. On your storage card create a folder, named "Autorun" and put all your cabs in there.
thanks for reply
but can you explain me how it will work?i mean it will just install after hard reset or flashing ROM only?
After flashing or hard reset, when device reads card, it will start auto installation of all cabs are located inside "Autorun" folder.
thanks,but after hard reset or flashing u know if its any program which does this?
for example i want to install at once 10-15 cabs to SD card without to click for each cab
hey mate try XDA_UC_NET v0.9.4.4 http://forum.xda-developers.com/showthread.php?t=709557
Take a full backup first. Put those cabs in the "Autorun" folder. Make a hard reset. Auto installation will began. You don't have to click on each cab, you select only the destination (internal memory or card).
Benjos said:
hey mate try XDA_UC_NET v0.9.4.4 http://forum.xda-developers.com/showthread.php?t=709557
Click to expand...
Click to collapse
hey
i wanted for long time to try this but someone from this forum said its installing on internal memory only
edit: i found a solution to install cabs on CARD ...gonna try it
here it is...i guess someone else will need it
http://htcpedia.com/forum/showpost.php?p=70225&postcount=5971
Trying to flash another .nbh but whe i go to three color screen i got no image tested with different kernels tested with windows nothing happens! Any suggestions?
rollride said:
Trying to flash another .nbh but whe i go to three color screen i got no image tested with different kernels tested with windows nothing happens! Any suggestions?
Click to expand...
Click to collapse
Format de SD card, and leave only the KAISIMG.NBH in it. FAT32
ok i will test and share the result thanks for the fast suggestion !
have a nice day
rollride said:
ok i will test and share the result thanks for the fast suggestion !
have a nice day
Click to expand...
Click to collapse
Damn... i said that ?? Can't remember....
Anyhow, post back results
same thing
after format same result no image file ...
So... your SD card is formated as FAT32, the file is named, exactly, KAISIMG.NBH, and the device does not detect it...
Question number one, is the sdcard ok ?
Question number two, is the sdreader ok ?
hell yeah
Everything is exactly how it should be. Except i was thinking also that sd card may be the problem but after a few tries with different cards i found out that the card is not the problem. After all i think that may be this is fault of the guys i took my phone to repair usb port but after three weeks later they didn`t, telling me that for my phone there is no port `cause it wasn`t as normal kaisers` port it is mirrored and the can`t find such in the internet to order (my kaiser is from T-mobile from Germany) and after they gave it back to me it started to make this weird thing...
Anyway thank you for your fast answers and suggestion really appreciate your help dude i wish you the best!
"Mirrored" USB port?
Sounds like a regular Kaiser multi-port to me. Kaiser, Tytn, Raphael, and a whole bunch of other HTC phones use that port.
Double-check and triple-check that ATools recognizes the file as a true Kaiser image.
You can name it whatever you want but if the file signature doesn't match what the SPL is looking for, you won't get it to install.
Which SPL are you using and did the "repair" people reflash the stock SPL ont the phone?
And... how long before the gray screen says "No Image File!"? If the image is wrong you will most likely see a group of 8 numbers across the top of the screen.
If you see these numbers, the image file is wrong.
?!?
the spl is 3.56.Hard CPLD-8
THERE is no numbers just displaying really fast no image file it took a long time to even read it `cause it is displaying it very fast and after that is back to three color screen ! I really don`t have any ideas any more ...
Success i formated in fat after that fat32 and this trick worked !
I was just about to ask about formatting...
Good to hear you figured it out!
When this "strange" issue pop up with sdcards and usb flash drives, i always resort to the the old HP SD Format tool
http://en.kioskea.net/download/download-127-hp-usb-disk-storage-format-tool
i will have it in mind next time ! thanks you !