Develop Bugs

ROM 4.01.12 on T-Mobile USA

Is anyone using the ROM version 4.01.12 on a T-Mobile XDA I in USA?
How has it worked out?
I want to cook a ROM from Stefan's great kitchen, using this ROM. The last one I cooked used ROM 4.01.16 (Official T-Mobilee version) but this ROM is really buggy.

define "buggy", cuase I want to cook a rom, and am not sure if I want 4.01.16 or not. Thanks.

1. With the phone turned on but PDA powered off, the PDA powers itself on every few minutes.
2. SD cards occasionally shows no files using Total Commander. When I pop the SD card into my PC's card reader, files are there?
There are a few other bugs that I can't put my finger on at the moment. If I could solve #1, the rest wouldn't bother me.
I should say that the ROM kitchens are great.

the PDA powers itself on every few minutes.
Click to expand...
Click to collapse
I have the same problem and it really pisses me off. My battery is always dead because it just randomly turns on. I set my XDA to turn off after 1 minute of inactivity....this helped a little.
I'm also looking to see if 4.01.12 works on T-Mobile in the USA. I really want 4.01.12 for the wmodem application. I asked Stefan, I'll let you know what he says(unless he posts here first).
Only one thing I liked: The ROM made my XDA super fast. When I view web pages with lots of graphics, it moves smoothly now. I'm not exactly sure why this is, but it's deffinately faster.

The 4.01.12 should work without any problem in the US.
Just don´t touch the radio Stack.
Easiest is cooking your own rom.
Best way is cooking without any Autoconfig, because it includes only Conifig for european providers...
Stefan

Thanks for your help, I'll download it now and test it out.

I can verify that the 4.01.12 works great on T-Mobile USA!
I'm typing this from my cell phones connection. I finally got wmodem to work after 2 weeks. Thanks for all your help Stefan.

Thanks Iron & Stefan.
I'm going to cook myself a ROM using 4.01.12 in Stefan's great kitchen.
Iron, has this ROM fixed the random turn on problem?
Have you noticed any drawbacks or problems?
Joe

So far I havn't noticed any random turn ons or any problems. Seems to be a good rom! 8)

I can't load this ROM. Everytime I try to flash using the exe file I cooked, I get the following error message:
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communicatin program. Please make sure the the USB/Serial cable is properly connected.
Any idea how to work around this so I can load this ROM?

I got the same error. It must be a problem with 4.01.16 or something. You need to flash it to a SD card. Ask me if you need help flashing.

Iron
Can I just copy the flashed exe file to an SD card, then use
bootloader on my XDA to execute the ROM file?

No, you can't. Just use XDAtools to make the required bootable SD. No, it doesn't matter what size, as long as it's 32mb+, and I feel as though I should tell you that you will loose all data off the card when you use the tools to put the image on. There is a certain format, and a header string, and bootloader compatability, and yada, yada, yada... XDATools OSImage takes care of all that.
I just hosed my MDA I with a 4.1.16 ROM by installing KSE truefax into the image. Had to use SD method to reload the same ROM recooked without KSE, and it works beautifuly!!!!! This [email protected] vibrate is the only thing really pissing me off right now, but I haven't found any known probs, except broken pins/burnt motors. We'll see when I take it apart to strip/paing the case.....Sorry, getting off thread subj.
Good Luck!

Joe_PDA said:
Iron
Can I just copy the flashed exe file to an SD card, then use
bootloader on my XDA to execute the ROM file?
Click to expand...
Click to collapse
I think your asking this so you don't need to download it again. As he already said the answer is no, but you do not need to download it again.
Download OS Image tool as he said, and there will be an English Folder. Extract the .exe that you downloaded and there will also be an English folder. Copy the .NK(I think its .NK) file from the ROM English folder to the OS Image tool English folder. Right click on the file and click Burn to SD card, and you will be set to go.

Help Needed

hey guys,
i've problems to update my pocket pc to mobile 6. I tried both methods no one works for me.
First i tried to connect my pocket to my pc and started windows mobile center. Downloaded all the files, but always when i start the update, my pocket goes to the boot screen with the red, freen and blue stripes and the connection disconnects. And i get the message 260 update problems and my pocket stays at the boot screen. Than i tried the same with Windows XP and ActiveSync, the same problem again.
After that, i tried to update with a micro SD card 2GB. I downloaded the "Hard-SPL-V7"-File and saved it to the micro SD. Rebooted the Pocket, but nothing happend, the pocket stayed in the boot screen. Than i renamed RUU_signed.nbh in HERMIMG.nbh and tried it again, nothing happens.
Can somebody help me please? I want to use mobile 6, because i want to use a 8GB Micro SD.
EDIT: THANKS A LOT, but now i have a new Problem i described it in post #6 in this thread. Thank u 4 helping me.
EDIT II: Thank u all, i fixed it by myself. Finally the upgrade worked with XP and ActiveSync. The best thanks to ultramag69 again, he solved my problem.

If you are using vista you need to install this, removing all older versions
Do you have the newest .net framework on your computer from here?
You wont be able to flash via SD without HardSPL, so you need todo it via activesync.
Try another USB port.
Try flashing the shipped from for your device, you can get your newest WM6 rom from here.
If that fails, tell us:
Whats your device (theres loads of different models of the Hermes)
Have you flashed anything before?
What rom is on your device atm?
What SPL do you have atm? (Hard or not)
Also check your serial number against this list for known problems.

There are certain steps needed to be taken. First is making sure your computer has the .net compact framework. Get it here.
Only then can you run hard spl from your computer.
Also, when you put on a .nbh file onto the microsd and rename it, you need to go into bootloader not reboot. You need to hold the power button and ok button while pressing the reset button with stylus...

I have got the same problem....
Using XP not able to flash neither via Active sync nor by SD card...
Stck at MRH 8.4...

Go to post 1160 on page 116 of this thread to flash Hard SPL using the sd card method - http://forum.xda-developers.com/showthread.php?t=296722
You can't flash using the sd card method without Hard SPL. To flash Hard SPl on you need to do an extra step - flash with soft SPL.
To flash the os just leave out steps 5 & 6 from the above post after you have Hard SPL installed...
Cheers...

Thank you guys for helping me,
A big thank to ultramag69, your post solved my problems. It worked great.
But now i have a new problem. I upgrated the SPL to HardSPL v7 (opipro 2.10). With the help from ultramag69 it worked perfect. Sooner i did the radio update with Micro SD - worked perfect too.
So finally i tried to update the ROM, downloaded the german ROM version from this Thread copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and did a reboot (ok, start and reset buttons) like i did it before. But it shows me at the screen only HERMIMG.nbh and BOOTLADER. When i start the update it runs 2 seconds and i get the message HERMIMG.nbh - OK BOOTLOADER - OK UPDATE COMPLETE. But it doesnt start the WM6 Update. Why not? Can someone help me again please?

I think the only file that's supposed to be on the microsd is the hermimg file...
not sure if having other files there will effect it like that...

Rollswap said:
... copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and... But it doesnt start the WM6 Update. Why not? Can someone help me again please?
Click to expand...
Click to collapse
the only file that you have to copy to your SD card is RUU_Wrapper.nbh (size: about 90 MB) after naming it to HERMIMG.nbh
note that this will up-/downgrade your Radio to V1.47.00.10 so you can also check other available German Versions with other Radio versions on the Hermes Wiki

Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help

alex8525 said:
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
Click to expand...
Click to collapse
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help

zocster said:
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
Click to expand...
Click to collapse
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?

alex8525 said:
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
Click to expand...
Click to collapse
Ok so what is the status of your device now, have you flashed back to official shipped rom?
Please try these instructions. also here please view.

If the sd card is more than 2gb it won't be recognised by bootloader. The os (wm06+) is able to detect and read sdhc but the bootloader doesn't.
Did you format the sd card fat32. I know a few people who swear black and blue they did but when I reformatted it, it was registering as being fat.
Did you copy ONLY THE .NBH file to the sd card and rename it to hermimg.nbh? Won't be recognised if you didn't.
These are steps I tend to go through myself as 1 little thing overlooked can mean either nothing happens or disaster....
Cheers...

first time flashing a rom questions

i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard

Natureboyhcg said:
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Click to expand...
Click to collapse
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.

KK13 said:
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
Click to expand...
Click to collapse
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.

WM05 and bootloader only support 2Gb or less though there is an sdhc patch for WM05.
WM06 had the patch to support SDHC cards from 4Gb up to 32Gb. WM6.1 and WM6.5 are also SDHC compliant.
You need a 2Gb or less sd card to flash an OS or different SPL as the bootloader only supports 2Gb or less. Its not upgradeable.
Now that everythings clear as mud,
Cheers...

You could also pick up a 1 gig (or even a 512meg) card on the cheap to do your flashing, and use the 4 gig for your everyday storage in the phone. Then have the best of both worlds!

psylink said:
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
Click to expand...
Click to collapse
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.

KK13 said:
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
Click to expand...
Click to collapse
HardSPL only needed to install once, after that you can install whatever ROMs you like many times.

True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...

ultramag69 said:
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
Click to expand...
Click to collapse
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34

StefanHou said:
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
Click to expand...
Click to collapse
Did you try formating the SD card on a desktop (or laptop) computer and not phone with Memaid?? Maybe that has something to do with it. Is it a 2gig card or less than 2 gig??

As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...

ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
Onya dude .. you have a better way with words !!

ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
OK, will find SDconverter and try the suggestion, thx KK and Ultramag

*Newbie* Custom ROM Flashing Guide​
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-

zivkong said:
*Newbie* Custom ROM Flashing Guide​
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
Click to expand...
Click to collapse
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?

StefanHou said:
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
Click to expand...
Click to collapse
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?

Man, I don't have a clue. The only issue I ever encountered was thinking my card was formatted fat32 when it wasn't.
I think this is now beyond me.

StefanHou said:
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Click to expand...
Click to collapse
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.

Also check your spelling of hermimg.nbh as a simple error will screw up everything...
Also put sd card in then reset to bootloader, hold in all the buttons - ok, power and reset with stylus, until the bootloader comes up.
Cheers...

KK13 said:
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Click to expand...
Click to collapse
KK13, Boog and Ultramag
OK this is what I did last night:
1. Flashing to the shipped AT&T Stripped ROM
2. Having it reflashed with the HardSPL V7 (to ensure the file is non corrupted, I re-downloaded it from some links in some thread and check the file size, they are all the same )
3. Reformating my SD Card with PC for FAT32;
4. Copy the nbh file and rename it with HERMIMG.nbh (recheck three times and I think I get it right. btw, is there any different to write it in capital? );
5. Press OK and Power, then stick the reset button.
6. Go to the boot loader (with 'Serial' on ht white screen)

[Q] Latest xdandroid for touch pro 2 how-to

This is my first for anything like this. I have a Sprint HTC Touch Pro 2, and want to put the latest version of XDANDROID on it. But, have no clue which version or where to start. I would like to eventually get in to building on my own. Could someone please help get me started?

TheCasper said:
This is my first for anything like this. I have a Sprint HTC Touch Pro 2, and want to put the latest version of XDANDROID on it. But, have no clue which version or where to start. I would like to eventually get in to building on my own. Could someone please help get me started?
Click to expand...
Click to collapse
to get started, it really doesn't get any simpler than downloading the latest FRX03 from here:
http://sites.google.com/site/androidport/downloads
(i'd recommend the RAR version, so you can unzip it into your SD card faster)
after that, just use WM's file explorer navigate to andboot and run haret.exe and you're "done"
----
(optional) with a little bit of more effort, go into the top sticky of this forum, and update to the latest Kernel (1253). the current Kernel in FRX03 from Dec 20 is (i believe) 1232.

It's sort of that easy, but I had this same question before I did it too. It would have been nice if the FAQ said this explicitly.
If you download the rar archive, it will extract out in its own subdirectory, e.g.
XDAndroid2.2Froyo.XXxxXX/andboot/...
The first thing I do is move the andboot subdirectory to the root of the SD card.
The next thing is to edit the andboot/startup.txt file to match your phone. I guess you can use the XDAndroidStartup utility to take care of this instead, but the first time I tried that it failed because of that silly runtime dependency.
If you want to use the startup utility, and it gives you an error and refuses to run, you need to install the updated net framework like it talks about on this page:
http://sites.google.com/site/androidport/startup-utility

Thanks guy I will give it a try and post if I have questions. I love the design/setup of my TP2 but I hate the windows OS.

Need more help My phone is getting stuck and the XDANDROID start up image/video thing

TheCasper said:
Need more help My phone is getting stuck and the XDANDROID start up image/video thing
Click to expand...
Click to collapse
Just let it do its thing, boots can take 5-10 min!

Kind of got it working, but have no idea how to use it fun stuff.

quick question, do I always have to have the sim card out when running ANDROID?

TheCasper said:
quick question, do I always have to have the sim card out when running ANDROID?
Click to expand...
Click to collapse
If your phone is in GSM mode, you'll want it in. Check your startup.txt, you'll need force_cdma=0 in there.
If you're on CDMA, I believe you do have to have the SIM removed, yes. Also, the above command should have a 1 instead of 0.
^^ I'm not positive about that piece, but I do know that Android on our phones will only recognize one or the other - GSM or CDMA. Maybe we'll get it to recognize both one day, I saw an entry for it in the RIL...

I do know that I have CDMA. Plus how do update the kernel, where do I put it?

TheCasper said:
I do know that I have CDMA. Plus how do update the kernel, where do I put it?
Click to expand...
Click to collapse
You simply replace your existing kernel and modules.
So delete the existing zImage/modules-xxxx.tar.gz, and put in the new zImage/modules-xxx.tar.gz. Don't rename the modules file, but be sure the zImage file is named just that - zImage.
The files go where you run haret.exe from - typically the root of the SD, or in /andboot.

UH-OH, not sure what happened. I reformated my SD card to do a new run since I found what I wanted. Now it seems like I can do everything but make calls in WM6.5. What do I do

TheCasper said:
UH-OH, not sure what happened. I reformated my SD card to do a new run since I found what I wanted. Now it seems like I can do everything but make calls in WM6.5. What do I do
Click to expand...
Click to collapse
Android should have no effect on WinMo (assuming you're using haret/install on your SD). Plus, this really isn't a place to get help with WinMo.
Do the usual - soft reset, hard reset, reflash of stock ROM.

arrrghhh said:
Android should have no effect on WinMo (assuming you're using haret/install on your SD). Plus, this really isn't a place to get help with WinMo.
Do the usual - soft reset, hard reset, reflash of stock ROM.
Click to expand...
Click to collapse
I know, I'm trying to put android on it and I am using haret from the SD card. I'm just not sure if this is will effect android or is a common problem. Thanks though, I have been going through those things while i wait.

No image file

Trying to flash another .nbh but whe i go to three color screen i got no image tested with different kernels tested with windows nothing happens! Any suggestions?

rollride said:
Trying to flash another .nbh but whe i go to three color screen i got no image tested with different kernels tested with windows nothing happens! Any suggestions?
Click to expand...
Click to collapse
Format de SD card, and leave only the KAISIMG.NBH in it. FAT32

ok i will test and share the result thanks for the fast suggestion !
have a nice day

rollride said:
ok i will test and share the result thanks for the fast suggestion !
have a nice day
Click to expand...
Click to collapse
Damn... i said that ?? Can't remember....
Anyhow, post back results

same thing
after format same result no image file ...

So... your SD card is formated as FAT32, the file is named, exactly, KAISIMG.NBH, and the device does not detect it...
Question number one, is the sdcard ok ?
Question number two, is the sdreader ok ?

hell yeah
Everything is exactly how it should be. Except i was thinking also that sd card may be the problem but after a few tries with different cards i found out that the card is not the problem. After all i think that may be this is fault of the guys i took my phone to repair usb port but after three weeks later they didn`t, telling me that for my phone there is no port `cause it wasn`t as normal kaisers` port it is mirrored and the can`t find such in the internet to order (my kaiser is from T-mobile from Germany) and after they gave it back to me it started to make this weird thing...
Anyway thank you for your fast answers and suggestion really appreciate your help dude i wish you the best!

"Mirrored" USB port?
Sounds like a regular Kaiser multi-port to me. Kaiser, Tytn, Raphael, and a whole bunch of other HTC phones use that port.
Double-check and triple-check that ATools recognizes the file as a true Kaiser image.
You can name it whatever you want but if the file signature doesn't match what the SPL is looking for, you won't get it to install.
Which SPL are you using and did the "repair" people reflash the stock SPL ont the phone?
And... how long before the gray screen says "No Image File!"? If the image is wrong you will most likely see a group of 8 numbers across the top of the screen.
If you see these numbers, the image file is wrong.

?!?
the spl is 3.56.Hard CPLD-8
THERE is no numbers just displaying really fast no image file it took a long time to even read it `cause it is displaying it very fast and after that is back to three color screen ! I really don`t have any ideas any more ...

Success i formated in fat after that fat32 and this trick worked !

I was just about to ask about formatting...
Good to hear you figured it out!

When this "strange" issue pop up with sdcards and usb flash drives, i always resort to the the old HP SD Format tool
http://en.kioskea.net/download/download-127-hp-usb-disk-storage-format-tool

i will have it in mind next time ! thanks you !