every time i try to flash a rom it came the 0% and stop i need help plz
i have a olinex hardspl would anyone plz help me and i am also trying to flash a radio rom and i also failed
thank you
dont understand cause my english is not good.
did you flashed with olinex or not?
yes but i need to flash the original hard spl
Related
Hi all,
I tried flashing ROM some time, but each time didn't get further than the grey screen with 0%, and end up with "ERROR[294] : INVALID VENDER ID ". I have to remove and reinstall the battery to repair and revert to flashing, but nothing.
HardSpl by Olinex it´s same problem.
Any idea?
For your ref.
RADIO 09325NS26
G 52.26.25.09H
ROM 1.35.0000
DIAM 100 V11
Thank a lot!
Install HardSPL developer and try again.
If a rom upgrade stays at 0% this is likely the case when you use the HardSPL wich requires signed roms. Unsigned can be loaded with HardSPL developers edition. Note there is more risk involved and can brick your phone if the ROM is corrupt!
xavalon said:
Install HardSPL developer and try again.
If a rom upgrade stays at 0% this is likely the case when you use the HardSPL wich requires signed roms. Unsigned can be loaded with HardSPL developers edition. Note there is more risk involved and can brick your phone if the ROM is corrupt!
Click to expand...
Click to collapse
Thank for your comment, but i tried to install HardSPL signed and unsigned too ans same problem 0%
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Please...
Does someone can help me?
it seems my problem can come from vista drivers. I foud a topic :
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
But even folowing the instructions my update is still locked at 0% and tells me an error 262.
I ve done the whole instructions and installed the old driver but no matters. Somebody knows a way to solve my problem?
cdfr31 said:
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Click to expand...
Click to collapse
Using signed Hard-SPL?
Use this this to flash your radio : http://htcroms.aplace4u.biz/signed/radio/Diamond_Radio_1.00.25.05.rar
Hi Corian,
Thnaks to you I ve finaly flashed my radio!
Your trick was the good one.
Now I am trying to install a new rom casue i dont like the 0.95 bepe elite.
I have exactly the same problem with every flash i am attempting. It stays at 0% and tells me a 262 error.
My SPL is olinex 1.30.
Could you tell me whats the best and if you can give me the link to download the good files.
I d like to install an official HTC Rom and maybe for this i have to change the SPL?
Thanks for your great help.
HI,
Finally I have solved all py problems.
The problem was coming from the hard SPL I had installed.
I ve managed to change the hard spl which wasn t possible. I had to force the mode bootloadrer and then the hard spl was flashed and replaced by 1.40 Olinex unsigned.
Then I flashed rom and radio and splash screen without any problem.
In fact the whole thing about drvier Vista wasn t the problem I think.
Thanks to Corian who helped me to identify the source of the problem : incompatibility with hard spl taking only signed things.
Hello all . Here's my problem. After all the tutorials ive been through nothing helped me. I have an HTC Diamond which i bought from Australia ( means its HTC DIAMOND TELSTRA ROM or something) and I have no idea how to put another Rom . Ive tries HardSPL and everything else , and every time I finish hardSpl and start putting a new rom it stacks at 0% . Yes ive tried a lot of programs even tried to rebuild the rom file and still nothing. What I need to do is remove the stock telstra rom and put another one , custom rom
Any help would be much appreciated!
Anyone can help me out????
Think you used a signed hard spl
You must use a Unsigned hard spl
Can you be more specific pls?
Read this Topic http://forum.xda-developers.com/showthread.php?t=400950
And install the Unsigned Hard SPL Diamond Olinex
Download link is in the second topic
And retry to flash a rom
I know you guys most be tired of this but im still a lil confused about all this since i have searched around and i have still to know how to return the stock SPL...now i know theres alot of post that show how but what i need to do is find out one which i dont have to use my phone:
What i mean is....i dont have to copy SSManual.bat to my fun and run it from my phone...because i have to return my phone to HTC for warranty reasons but i cannot get passed the align screen configuration at boot since my touch is messed up (p.s. i can still flash and active sync)...
what i need to know is a way to return to the stock SPL without using the phone (except for Active Sync)...
p.s. if i have the ASIA WWE HK ROM on the SPL would be 1.34 or 1.93?
thank you!!
[SOLVED]
Basically, thanks to the ppl in this thread for helping.....since i couldnt get passed my align screen cause of hardware problems with my screen i couldnt access the sspl-manual in order to revert to stock spl so what i did is i flash my phone with Dia duit 1.4 which has no welcome screen or align screen so i could go thru to the phone then performed the sspl manual and reverted to the 1.93 spl (my version)and afterwards i flash my phone with the Asia HTC wwe orginal romhttp://forum.xda-developers.com/showthread.php?t=410720 ......i know ure supposed to first flash orginal rom and then the stock spl but i took a chance and it worked...THANKS u guys keep up the good work and now its up to HTC to fix my hardware....Hoping its on warranty
By the way right now im on Olinex 1.40
thank you again!!!
can't you install the hardspl through bootloader mode?
Unfortunately no, everytime i do either i get an error [202] or it goes straight to 100% but then when i check with the vol - and reset button it shows olinex 1.40
did anybody ever try to send it without reverting back to the stock spl ?
emy09 said:
did anybody ever try to send it without reverting back to the stock spl ?
Click to expand...
Click to collapse
Try to install a rom which don't have to align the screen. then you copy the file you wants from the phone.
Good luck
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
http://forum.xda-developers.com/showthread.php?t=493719
emy09 said:
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
Click to expand...
Click to collapse
i think the new rom of suiller (diadiut 1.4) would do. you don't need to screen align after flashing.
azera_2000 said:
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
Click to expand...
Click to collapse
I appreciate the help but the problem is that i cannot get passed the align screen of the first boot which means i cant run sspl manual since i cannot in the files from my phone.....also if i do flash the Dia duit 1.4 rom which does not boot with the align screen or welcome screen, dont i have to flash the original rom before putting the stock SPL !!.....thank you guys for the info
ive first flashed it whit the olinex 1,34 RUU_Signed.nbh i think its called then i try to flash whit the bsb6 that i want as as my new rom but when it has resetet the device and starting the updating of rom, it freezes at 0%
is there somekind of unlock i still need ? ive read about some hardspl wich i tried but .. it runs thourg the first thing, then the bootloader thing it get to 15% then my device freezes ... what do i do ??
neondyret said:
ive first flashed it whit the olinex 1,34 RUU_Signed.nbh i think its called then i try to flash whit the bsb6 that i want as as my new rom but when it has resetet the device and starting the updating of rom, it freezes at 0%
is there somekind of unlock i still need ? ive read about some hardspl wich i tried but .. it runs thourg the first thing, then the bootloader thing it get to 15% then my device freezes ... what do i do ??
Click to expand...
Click to collapse
Try flashing Olinex 1,39 instead of 1,34. That should solve your problem.
Cheers.
cant find
can you link to the 1.39? cant seem to find it :S
I take it you have read this sticky
http://forum.xda-developers.com/showthread.php?t=416211
Grab hard spl 1.93 from my signature and let me know how it goes...