ive first flashed it whit the olinex 1,34 RUU_Signed.nbh i think its called then i try to flash whit the bsb6 that i want as as my new rom but when it has resetet the device and starting the updating of rom, it freezes at 0%
is there somekind of unlock i still need ? ive read about some hardspl wich i tried but .. it runs thourg the first thing, then the bootloader thing it get to 15% then my device freezes ... what do i do ??
neondyret said:
ive first flashed it whit the olinex 1,34 RUU_Signed.nbh i think its called then i try to flash whit the bsb6 that i want as as my new rom but when it has resetet the device and starting the updating of rom, it freezes at 0%
is there somekind of unlock i still need ? ive read about some hardspl wich i tried but .. it runs thourg the first thing, then the bootloader thing it get to 15% then my device freezes ... what do i do ??
Click to expand...
Click to collapse
Try flashing Olinex 1,39 instead of 1,34. That should solve your problem.
Cheers.
cant find
can you link to the 1.39? cant seem to find it :S
I take it you have read this sticky
http://forum.xda-developers.com/showthread.php?t=416211
Grab hard spl 1.93 from my signature and let me know how it goes...
Related
Hi guys. I have installed loads of ROMs onto my trusty hermes yet today, when trying to flash DuttyThroys Ultra Ultra Lite rom this happened: i downloaded ROM and installed it, it seemed to install fine, got to 100% and then came up with error message stating that Image File was corrupt. Now my hermes is stuck on the multicoloured bootloader screen?!?!?!? I have SPL 2.10. Hard SPL V7 HERM 100 IPL 1.04 (Dont know which of these is relevant to anythin?) .I have read the WIKI on repairing bricks but for my problem it says to reflash any nbh without radio. How is this possible if i cant get my pc to connect to my hermes???
Tried the method of turning off usb connection in active sync, removing battery, reconnecting to usb and running mitty (command SET 14 0) but nothing happens. Mitty says CMD error and active sync doesnt reopen the connection like the guide says! Man i hate this cuz i have now become one of those annoying noobs who has bricked their phone and hassles everyone for help!!!!
Have also tried to flash from sd card but nothing happens, flicks to white screen with LOADING... on it for 2 secons then flicks back to that wonderful multicoloured screen of joy!
Any help will be appreciated guys, cant live without my hermes!!!
Welcome to the fuc... nightmare world of the brick,i'mma in your same situation,now my Tytn is a piece of white stone,and it seems there's no reason to bring it back to live!
I can't stay without my Tytn i do a lot of things with it,Skype,SIP calls,Mail,Messenger,Memo,Internet......i'm in totally despair!!!
you should be able to just reflash a known good rom.
hfam95 said:
you should be able to just reflash a known good rom.
Click to expand...
Click to collapse
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
IT could be interesting to make the minimal effort to go and read the wiki.
anyway:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Better than just cry.
MarcWhittle said:
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
Click to expand...
Click to collapse
With the microsd card...
right, its looking good. managed to begin flashing (bar has stopped for ages but having read this is normal im not so scared!) using the SD method. Where my device wasnt superCID i had to use the matching ROM (Orange) to my CID (which incidently i dont know, just downloaded both Orange ROMs).
While im waiting ill try and help you TETSUO! (Im a noob so probably cant!)
Is your device SuperCID??? tell me as much as you can about your device SPL etc
dude, if u read my post u would have seen that i have tried SD method once (sing Black 3.5 not ORANGE ROM), im not crying and im grateful for any help but when i get advice such as 'flash a rom' im gonna be pissed!
And i have read ALL the page on unbricking!!!
It worked!!
One more question, as i have installed a stock Orange ROM do i now need to reinstall HardSPL v7??
Are you on a Win XP or a Vista PC?
XP dude, sorry should have said! and thanks
i went into bootloader, still says 2.10 olipro but when i try to update to new ROM (Black X RC)and pick autodetect it says it says unknown version, use SSPL. it never used to say this so i assume i need to install HardSPL 7 again???
with the tri colour sceen, when you plug the usb cable in does it go from serial to USB ?
what OS have you got ?
just my 2 cents hope it helps.
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
sorry slooooooooooooooooow typing
good question hope there an answer,
MarcWhittle said:
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
Click to expand...
Click to collapse
just saw your post if ur device is hardspl you just need to supercid your device, If your spl is still showing hardspl and its coming as a error that normally happens to me as well just manually click spl 2.10 and tick (is it hardspl?}
To recap, i have now managed to flash a stock Orange ROM from SD card ( i think the reason it didnt work first time with SD is because device isnt SuperCID and i was trying to flash Black RC, soon as i used Orange ROM (my device is M3100) it worked. I am now back to a fully operational device. I wish to go back to Black but when i AutoDetect what bootloader i have it recommeds SSPL method. Before all my problems it would always automatically pick 2.10?? Does this mean i need to install HardSPL v7 again??
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
MarcWhittle said:
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
Click to expand...
Click to collapse
If you only flash the orange os.nb only then your hardspl wouldnt have changed so its safe to flash your device just manually choose.
If you want to flash hardspl again then do it on a precaution method
Mark,
First of all well done for getting yourself out of a hole. It seems quite difficult to ask for help these days without being shot to pieces even when you have first tried to help yourself by doing all the right things, which is more than can be said for some who come on here asking for help. So well done again.
Re your question, I would reflash Hard SPL anyway to be sure; however before you do that go to the Mr Vanx's guide on hard SPL (forgot the link but type in www.mrvanx.org and you should be taken there) and follow his instructions.
Good luck.
WB
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Please...
Does someone can help me?
it seems my problem can come from vista drivers. I foud a topic :
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
But even folowing the instructions my update is still locked at 0% and tells me an error 262.
I ve done the whole instructions and installed the old driver but no matters. Somebody knows a way to solve my problem?
cdfr31 said:
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Click to expand...
Click to collapse
Using signed Hard-SPL?
Use this this to flash your radio : http://htcroms.aplace4u.biz/signed/radio/Diamond_Radio_1.00.25.05.rar
Hi Corian,
Thnaks to you I ve finaly flashed my radio!
Your trick was the good one.
Now I am trying to install a new rom casue i dont like the 0.95 bepe elite.
I have exactly the same problem with every flash i am attempting. It stays at 0% and tells me a 262 error.
My SPL is olinex 1.30.
Could you tell me whats the best and if you can give me the link to download the good files.
I d like to install an official HTC Rom and maybe for this i have to change the SPL?
Thanks for your great help.
HI,
Finally I have solved all py problems.
The problem was coming from the hard SPL I had installed.
I ve managed to change the hard spl which wasn t possible. I had to force the mode bootloadrer and then the hard spl was flashed and replaced by 1.40 Olinex unsigned.
Then I flashed rom and radio and splash screen without any problem.
In fact the whole thing about drvier Vista wasn t the problem I think.
Thanks to Corian who helped me to identify the source of the problem : incompatibility with hard spl taking only signed things.
Hello,
i have a big problem.
After the installation of some Roms i have to do a hard reset becaue my Diamond chrashes.
So now I installed another Rom and the "Preparing your device for first use" screen appears but after this, nothing appens.
So i don't have any idea what i can do to fix this Problem...
Did anyone of you can help me please?
A little more inforation from you.
Might help to mention which rom you are having the issue with, which Radio version etc.
Radio ist 1.09.25.23 and the Rom ist Udks new Topaz R2.
I have the same experience with udK Syrius Topaz R0. The device keeps hardresetting even after I have installed another rom. Eventually, I restored to stock rom and install another cooked rom again. The problem seems to have been solved.
There are other users having the same problem with this rom. Although some have reported no problem, I would keep watching before installing this rom again.
ichselbst said:
Hello,
i have a big problem.
After the installation of some Roms i have to do a hard reset becaue my Diamond chrashes.
So now I installed another Rom and the "Preparing your device for first use" screen appears but after this, nothing appens.
So i don't have any idea what i can do to fix this Problem...
Did anyone of you can help me please?
Click to expand...
Click to collapse
How long are you waiting on this screen. It does take a few minutes for it to finish what it's doing.
Oh i wait about half an hour...
Now I changed the Rom and flashes Aztor and all is working.
Is it possible that the version of HardSPL is the reason for the hang up with udk's Rom?
At the moment i use hard-SPL 1.4, but I don't know how i can install the 1.93 Version.
When I download the zip.package from this tread http://forum.xda-developers.com/showthread.php?t=400950 the package contains only the RUU_Signed.nbh file and I have no idea how to install this file?!
ichselbst said:
Oh i wait about half an hour...
Now I changed the Rom and flashes Aztor and all is working.
Is it possible that the version of HardSPL is the reason for the hang up with udk's Rom?
At the moment i use hard-SPL 1.4, but I don't know how i can install the 1.93 Version.
When I download the zip.package from this tread http://forum.xda-developers.com/showthread.php?t=400950 the package contains only the RUU_Signed.nbh file and I have no idea how to install this file?!
Click to expand...
Click to collapse
You need the custom RUU to flash the spl to your phone
Im sorry, it is maybe a bad question, but where can I find the Costum RUU?
Thanks for your help!
Prewien said:
You need the custom RUU to flash the spl to your phone
Click to expand...
Click to collapse
Custom RUU does not seem to work with olipro's SPL 1.93. Try this one HERE which I know works.
ichselbst all you need to do is unpack this and run the ROM Update utility (RUU) follow insructions and wait till screen staes finished.
Hope that helps
I know you guys most be tired of this but im still a lil confused about all this since i have searched around and i have still to know how to return the stock SPL...now i know theres alot of post that show how but what i need to do is find out one which i dont have to use my phone:
What i mean is....i dont have to copy SSManual.bat to my fun and run it from my phone...because i have to return my phone to HTC for warranty reasons but i cannot get passed the align screen configuration at boot since my touch is messed up (p.s. i can still flash and active sync)...
what i need to know is a way to return to the stock SPL without using the phone (except for Active Sync)...
p.s. if i have the ASIA WWE HK ROM on the SPL would be 1.34 or 1.93?
thank you!!
[SOLVED]
Basically, thanks to the ppl in this thread for helping.....since i couldnt get passed my align screen cause of hardware problems with my screen i couldnt access the sspl-manual in order to revert to stock spl so what i did is i flash my phone with Dia duit 1.4 which has no welcome screen or align screen so i could go thru to the phone then performed the sspl manual and reverted to the 1.93 spl (my version)and afterwards i flash my phone with the Asia HTC wwe orginal romhttp://forum.xda-developers.com/showthread.php?t=410720 ......i know ure supposed to first flash orginal rom and then the stock spl but i took a chance and it worked...THANKS u guys keep up the good work and now its up to HTC to fix my hardware....Hoping its on warranty
By the way right now im on Olinex 1.40
thank you again!!!
can't you install the hardspl through bootloader mode?
Unfortunately no, everytime i do either i get an error [202] or it goes straight to 100% but then when i check with the vol - and reset button it shows olinex 1.40
did anybody ever try to send it without reverting back to the stock spl ?
emy09 said:
did anybody ever try to send it without reverting back to the stock spl ?
Click to expand...
Click to collapse
Try to install a rom which don't have to align the screen. then you copy the file you wants from the phone.
Good luck
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
http://forum.xda-developers.com/showthread.php?t=493719
emy09 said:
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
Click to expand...
Click to collapse
i think the new rom of suiller (diadiut 1.4) would do. you don't need to screen align after flashing.
azera_2000 said:
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
Click to expand...
Click to collapse
I appreciate the help but the problem is that i cannot get passed the align screen of the first boot which means i cant run sspl manual since i cannot in the files from my phone.....also if i do flash the Dia duit 1.4 rom which does not boot with the align screen or welcome screen, dont i have to flash the original rom before putting the stock SPL !!.....thank you guys for the info
Hi there all.. i have my diamond i think for some months now.. and i want to install another rom..
I dont have the original rom.. after i bought my diamond i flashed it .. i installed first a hardspl then the rom and now i want to flash another rom ( A.Z.T.O.R X2 ) and i want to ask if i can flash it directly or i have to install the hardspl again ?
you only have to flash hard spl once and you can flash as many roms as you want
Just a heads up to not forget to do a hard reset after installing a ROM to avoid bugs that can occur from flashing....
oh ok thx ill do a hard reset yeah.. can anyone tell me where can i check on what hardspl do i have on my diamond ? i know i got DiamondStone v2.1 ROM but i dont know the hardspl..
When you enter the bootloader it tells you which spl you have flashed on your phone, to get into the boot loader, VOL DOWN + RESET
A ok yea ur right i just restarted my diamond and i saw it sorry..
ok so i have
R. 1.00.25.03
G 52.261.25.09
D 1.93.00.00
Hardspl is 1.93.00.00 i guess.. so ill go ahead and install the rom that i want and normally it should work
Umm the 1.93.00.00 i think shows the shipped hardspl, just as a precaution, you should check inside the bootloader :/
Yeah i did the bootloader thing.. and it says SPL - 1.40.OliNex its good i guess i can install any rom no ?
then your good to flash the roms from here meaning xda-dev diamond rom development forum
anubis23 said:
Umm the 1.93.00.00 i think shows the shipped hardspl, just as a precaution, you should check inside the bootloader :/
Click to expand...
Click to collapse
Actually the 1.93.00.00 speaks to the current ROM installed on the device...