My First Brick..... :eek: - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi guys. I have installed loads of ROMs onto my trusty hermes yet today, when trying to flash DuttyThroys Ultra Ultra Lite rom this happened: i downloaded ROM and installed it, it seemed to install fine, got to 100% and then came up with error message stating that Image File was corrupt. Now my hermes is stuck on the multicoloured bootloader screen?!?!?!? I have SPL 2.10. Hard SPL V7 HERM 100 IPL 1.04 (Dont know which of these is relevant to anythin?) .I have read the WIKI on repairing bricks but for my problem it says to reflash any nbh without radio. How is this possible if i cant get my pc to connect to my hermes???
Tried the method of turning off usb connection in active sync, removing battery, reconnecting to usb and running mitty (command SET 14 0) but nothing happens. Mitty says CMD error and active sync doesnt reopen the connection like the guide says! Man i hate this cuz i have now become one of those annoying noobs who has bricked their phone and hassles everyone for help!!!!
Have also tried to flash from sd card but nothing happens, flicks to white screen with LOADING... on it for 2 secons then flicks back to that wonderful multicoloured screen of joy!
Any help will be appreciated guys, cant live without my hermes!!!

Welcome to the fuc... nightmare world of the brick,i'mma in your same situation,now my Tytn is a piece of white stone,and it seems there's no reason to bring it back to live!
I can't stay without my Tytn i do a lot of things with it,Skype,SIP calls,Mail,Messenger,Memo,Internet......i'm in totally despair!!!

you should be able to just reflash a known good rom.

hfam95 said:
you should be able to just reflash a known good rom.
Click to expand...
Click to collapse
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??

IT could be interesting to make the minimal effort to go and read the wiki.
anyway:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Better than just cry.

MarcWhittle said:
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
Click to expand...
Click to collapse
With the microsd card...

right, its looking good. managed to begin flashing (bar has stopped for ages but having read this is normal im not so scared!) using the SD method. Where my device wasnt superCID i had to use the matching ROM (Orange) to my CID (which incidently i dont know, just downloaded both Orange ROMs).
While im waiting ill try and help you TETSUO! (Im a noob so probably cant!)
Is your device SuperCID??? tell me as much as you can about your device SPL etc

dude, if u read my post u would have seen that i have tried SD method once (sing Black 3.5 not ORANGE ROM), im not crying and im grateful for any help but when i get advice such as 'flash a rom' im gonna be pissed!

And i have read ALL the page on unbricking!!!

It worked!!
One more question, as i have installed a stock Orange ROM do i now need to reinstall HardSPL v7??

Are you on a Win XP or a Vista PC?

XP dude, sorry should have said! and thanks
i went into bootloader, still says 2.10 olipro but when i try to update to new ROM (Black X RC)and pick autodetect it says it says unknown version, use SSPL. it never used to say this so i assume i need to install HardSPL 7 again???

with the tri colour sceen, when you plug the usb cable in does it go from serial to USB ?
what OS have you got ?
just my 2 cents hope it helps.

dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!

sorry slooooooooooooooooow typing
good question hope there an answer,

MarcWhittle said:
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
Click to expand...
Click to collapse
just saw your post if ur device is hardspl you just need to supercid your device, If your spl is still showing hardspl and its coming as a error that normally happens to me as well just manually click spl 2.10 and tick (is it hardspl?}

To recap, i have now managed to flash a stock Orange ROM from SD card ( i think the reason it didnt work first time with SD is because device isnt SuperCID and i was trying to flash Black RC, soon as i used Orange ROM (my device is M3100) it worked. I am now back to a fully operational device. I wish to go back to Black but when i AutoDetect what bootloader i have it recommeds SSPL method. Before all my problems it would always automatically pick 2.10?? Does this mean i need to install HardSPL v7 again??

it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli

MarcWhittle said:
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
Click to expand...
Click to collapse
If you only flash the orange os.nb only then your hardspl wouldnt have changed so its safe to flash your device just manually choose.
If you want to flash hardspl again then do it on a precaution method

Mark,
First of all well done for getting yourself out of a hole. It seems quite difficult to ask for help these days without being shot to pieces even when you have first tried to help yourself by doing all the right things, which is more than can be said for some who come on here asking for help. So well done again.
Re your question, I would reflash Hard SPL anyway to be sure; however before you do that go to the Mr Vanx's guide on hard SPL (forgot the link but type in www.mrvanx.org and you should be taken there) and follow his instructions.
Good luck.
WB

Related

URGENT help on Hard SPL screen

Hello,
I executed the Hard SPL cab and went into bootloader or some sort of a multi colored screen which says IPL - 0.50 Trin100 and underneath it says SPL 3.03.0000. It connects to my computer and says USB but when I attempt to flash the new WM6 rom which I just downloaded from the rapidshare it resets the machine and continues to remain on this screen of multi colored stuff. I cannot seem to get out of it no matter what I do. What do i need to do to abort the multi colored screen or allow it to flash my HTC trinity with the Dopod WM6 rom?
Thanks,
Gilbert
PS: please don't shoot me if this was discussed elsewhere. i searched and could not fine anyting
happened to me yesterday.
with this screen install AGAIN the hard....
see
http://forum.xda-developers.com/showthread.php?t=316113
and
http://forum.xda-developers.com/showthread.php?t=312499 -page 45
How? I try to execute again the Hard SPL file and it gives me an error and says close window on PC.
Thanks,
Gilbert
it keeps giving me error in connection and i think i bricked my phone i tried to reinstall several times and i get the same results. Poor me.
Same hapen to me, then ive tried to instal over it a another rom and it came to life.
if you're in the bootloader already, try and run the RUU (update program) again on your pc after reconnecting your device.. if that doesn't work, please give details of the error. I don't think you're bricked yet
racerx_ said:
if you're in the bootloader already, try and run the RUU (update program) again on your pc after reconnecting your device.. if that doesn't work, please give details of the error. I don't think you're bricked yet
Click to expand...
Click to collapse
Thanks for your help. I get Error 260:
The update utility cannot connect to your pda. please check usb is connected. click exit to quit.
When I try to run the upgrade alone in XP it starts at 1% then resets the bootloader.
Thanks,
Gilbert
k which upgrade are you running? still trying to get hard spl working, or running the Dopod WM6 upgrade?
*i've been having some troubles upgrading today too, with the WM6.. scary times ha*
racerx_ said:
k which upgrade are you running? still trying to get hard spl working, or running the Dopod WM6 upgrade?
*i've been having some troubles upgrading today too, with the WM6.. scary times ha*
Click to expand...
Click to collapse
I am trying to upgrade the
RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship but i also tried to reflash the 1.23 HTC rom with GPS to see if it would flash since my device is an HTC trinity and not dopod but the same thing keeps happening.
Try to flash PDAVIET version, my came to life doing this
have you tried to flash any other ROM? I was stuck with the same thing, but managed to flash a cooked ROM..
what's your bootloader showing?
if you fail to flash any other ROM, i think you need to try the stack overfow exploit posted here.. http://forum.xda-developers.com/showthread.php?t=308691&highlight=error+206
it's a bit technical, but i think it's your best bet if all else fails.. Pof might be able to help you over there
No matter what i do, what rom i try to flash i get the same damn error message: Error 260 - Connection!!! I am connected so I don't what is wrong with it. I will try some more then decide to take a hammer and break it into 1000 peices.
Thanks.
racerx_ said:
have you tried to flash any other ROM? I was stuck with the same thing, but managed to flash a cooked ROM..
what's your bootloader showing?
if you fail to flash any other ROM, i think you need to try the stack overfow exploit posted here.. http://forum.xda-developers.com/showthread.php?t=308691&highlight=error+206
it's a bit technical, but i think it's your best bet if all else fails.. Pof might be able to help you over there
Click to expand...
Click to collapse
My bootloader is showing the following:
Trin100
IPL-0.50
Trin100
SPL-3.03.0000
Thanks for all your help.
hmmm... i'm not familiar with that SPL number... unless somehow that got halfway updated with the WM6 update.
I think you better head to that thread and try the stack exploit. Did you try loading a cooked ROM to see what happens?
that is it. i give up. i am not experienced in messing with codes. i am going to retire the device for good and use a regular phone. this is crap. thanks for ur help.
oh, that is the SPL version of the new ROM... i guess you weren't using hard spl when you tried to flash it?
ha, well don't give up too quick.. that's one expensive retired device you've got there.
Just keep cool and you should try to install an official Rom to downgrade this SPL !!
Gilbert said:
I will try some more then decide to take a hammer and break it into 1000 peices.
Thanks.
Click to expand...
Click to collapse
Help!
My bootloader is showing the following:
Trin100
IPL-1.00
Trin100
SPL-9.99.CP
When upgrading with the new released WM6 ROM, it keeps failing at 28%
Please help!
best bet for you, is load a different ROM now. Either cooked or official. That will get your device out of crash-proof spl bootloader.
Once the ROM is loaded, if you want to try the official wm6 again, run SSPL first and see if it'll work for you
p.s. i pm'd you my handphone number in case you've got trouble still..
Gilbert said:
My bootloader is showing the following:
Trin100
IPL-0.50
Trin100
SPL-3.03.0000
Thanks for all your help.
Click to expand...
Click to collapse
Hi Gilbert,
Im having exactly the same problem as you. Right now im in the middle of flashing it back down to WM5 (its working at the moment at 17%).
Hopefully after this i will be able to flash back to WM6 (Most probably will go back to AX3L for now).
Hope this helps you out (im quite stressed about it too!)
Edit: I have just finished flashing to Official WM5, now flashing back to AX3L WM6. It works!

Orange HTC touch diamond ROM update

Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
I suggest your search the forum...
hello newbie
yes use the search button...it works really well
You first need to flash your diamond with one of the hard spl on this site and after you've done that you can take your pick from any of the roms on here
sorry guys i did look just didnt understand much. I am trying to use Hard SPL just cant get it to work.
same here
I have an orange htc Diamond and would really apreciate which files wouldwork. Everything I have tried stay's at Zero and ends up in an error.
Any help would be greatly ppreciated
root directory
to use hard spl i have to put a file in the root directory! but what is the root directory?
Hi James, your failing at 0% most likely because the SPL your using will not allow unsigned ROM's. Look for another SPL, one with developer edition in the title is good and works quite well for me.
I have an Orange also, the first thing to do is install the SPL then flash the radio (.05 is good) then get a new ROM!
Hope this helps
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
james soules said:
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
Click to expand...
Click to collapse
You need to do the following
1. Download the Unsigned HardSPL 1.24 from here http://forum.xda-developers.com/showthread.php?t=408621 and extract to a folder on your PC. Make sure you have Active sync installed and setup with your Diamond. Run the Updater in the 1.24 folder. Once the Phone reboots reconnect with active sync.
2. Download any of the ROMS on here and run the ROM to flash the phone.
Thats it !!!!!
Topboy
as i go to add a ROM i get a error saying the application failed to initialize properly ( 0xc0000135) click OK to terminate
Or check www.modmydiamond.info for easy to understand information
i get the above error as i try to add RUU
Hard SPL won't work
Hello,
From what I've read on the forum and also on www.modmydiamond.info, I gather I need to go through the Hard SPL step before installing any ROM.
However, after trying 2 different SPLs (hard_spl.120 and diamond_hspl_1.24) it still doesn't work.
I'm stuck at 0%.
Thanks
Read here....
As an alternative to the other threads try this one:
http://forum.xda-developers.com/showthread.php?t=416211
Its about the most comprehensive writeup I've seen to quickly and easily get your Diamond set from HardSPL to Radios to ROM's
Also read the WiKi's section at the top of the forum......
Query on Orange htc Upgrade ROM.
Hi There,
I have recently purchased a htc diamond, it was originally an Orange unit but is unblocked.The ROM version is 1.37 but I wish to flash to 1.93.I have the Orange released version of the 1.93 as htc wont support me direct.Question is, if I do this will the unit revert back to being Orange??ie.....does this flash the radio back?? or will it remained unblocked??
Thanks in advance...
james soules said:
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
Click to expand...
Click to collapse
thxthxthxthx

CanĀ“t boot up my HTC TYTN Get HERM200

Hi there. i just rebooted my HTC TYTN and it cant boot up. i get a screen whit 4 colours (red,green,blue and white) and at the top it say this. HERM200 IPL-1.04 and HERM200 SPL-2.03 and then at the bottom it say Serial/USB.
Can you please point me in the right direction to fix this?
xatazch said:
Hi there. i just rebooted my HTC TYTN and it cant boot up. i get a screen whit 4 colours (red,green,blue and white) and at the top it say this. HERM200 IPL-1.04 and HERM200 SPL-2.03 and then at the bottom it say Serial/USB.
Can you please point me in the right direction to fix this?
Click to expand...
Click to collapse
Your in bootloader mode, if you want to flash your original shipped rom, or a cooked rom, see my FAQ (in my sig), all you need to do is plug your phone into your computer, and run the RRU (rom upgrade utility)
veyka said:
Your in bootloader mode, if you want to flash your original shipped rom, or a cooked rom, see my FAQ (in my sig), all you need to do is plug your phone into your computer, and run the RRU (rom upgrade utility)
Click to expand...
Click to collapse
If he can't pass the bootloader, I believe it's safer to try the SD Card flash...
Cheers.
Kevlar-Source said:
If he can't pass the bootloader, I believe it's safer to try the SD Card flash...
Cheers.
Click to expand...
Click to collapse
I have got stuck in bootloader quite a few times over the past few days, to many flashes.
But, yeh, SD card is probs safer
if i download this http://forum.xda-developers.com/showthread.php?t=387990
ANd install it then everything will work again ?
You can't use the sd card method without having Hard SPL on your phone 1st. It just throws up an error message...
xatazch will have to flash a shipped rom then put Hard SPL on the phone.
Cheers...
How do i find a good rom for me? i am going to try to develop .net apps for my wm6 phone. any good advice ?
xatazch said:
How do i find a good rom for me? i am going to try to develop .net apps for my wm6 phone. any good advice ?
Click to expand...
Click to collapse
Depends what your looking for, I have benchmarks on almost all of the roms out atm (doing CRC's12.11 atm and there a lot faster than 12.10), see my sig.
i dont have a sd card right now so i have to use the usb cable. can u please send me the link to the one i need to download?
Current development Version Downloads: Release 12.11:Normal
so if i use this one then?
on my phone it say SPL-2.03 and in your ruu it say SPL-2.02/2.10/2.30 NEW bootloader. is that the one i should use when i install ?
sorry for all the questions. butt in new att all of this =P
ok. what i understand is that i have do have HARD-SPL on my device. i have downloded Hard-SPL-V7 here is the thing. it say that i have to have the device connected to activesync. but i cant do that. my phone dont start up. how do i upgrade my SPL with no sd card and no usb connection to activesync?
Where can i find the original wm 6?
xatazch said:
sorry for all the questions. butt in new att all of this =P
ok. what i understand is that i have do have HARD-SPL on my device. i have downloded Hard-SPL-V7 here is the thing. it say that i have to have the device connected to activesync. but i cant do that. my phone dont start up. how do i upgrade my SPL with no sd card and no usb connection to activesync?
Where can i find the original wm 6?
Click to expand...
Click to collapse
What's the point of having a WIKI, all these volunteers have developed this site for what?
Hi there i am following this guide
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And when i try to update my SPL i get a screen that is saying Loading..... and then "00068002" popup in red and the Loading stops. i have used a 2 gb MicroSd memory for this.
Did you format your SD Card in Fat32?
YES
Check SD card for file errors?
yes i did (Properties->Tools->Error Checking)
i have Read this link to and it dont help me in anyway.
Please help and dont say RTFM or something like that. i dont know where to look anymore.
xatazch said:
Hi there i am following this guide
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And when i try to update my SPL i get a screen that is saying Loading..... and then "00068002" popup in red and the Loading stops. i have used a 2 gb MicroSd memory for this.
Did you format your SD Card in Fat32?
YES
Check SD card for file errors?
yes i did (Properties->Tools->Error Checking)
i have Read this link to and it dont help me in anyway.
Please help and dont say RTFM or something like that. i dont know where to look anymore.
Click to expand...
Click to collapse
You cant do SD card flashing without HardSPL, put your phone into bootloader mode and flash hard SPL via Activesync, or you can just flash you carriers shipped rom without flashing hard SPL, see the wiki/my FAQ
Put again:
If you want to flash COOKEd roms you need to flash HardSPL via ACTIVESYNC.
If you want to flash a NON COOKED rom look on the WIKI for "shipped" roms, and get the right one for your phone, stick your phone into bootloader, and run the RRU
But i have a problem there. activesynk dont find the htc tytn. i have tryid to install HTC_TyTN_SVE_3.54.263.2_102_6275_1.47.00.10_108.exe and it show that it is getting installed on the htc but when it get to 100% and i try to use the htc it is the same way.
4 colours (red,green,blue and white) and at the top it say this. HERM200 IPL-1.04 and HERM200 SPL-2.03
how do i do it if activsynd dont register that i have the htc connected?
xatazch said:
But i have a problem there. activesynk dont find the htc tytn. i have tryid to install HTC_TyTN_SVE_3.54.263.2_102_6275_1.47.00.10_108.exe and it show that it is getting installed on the htc but when it get to 100% and i try to use the htc it is the same way.
4 colours (red,green,blue and white) and at the top it say this. HERM200 IPL-1.04 and HERM200 SPL-2.03
how do i do it if activsynd dont register that i have the htc connected?
Click to expand...
Click to collapse
Have you tried hard resting?
"Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device."
If not, put it into bootloader using this:
"Bootloader mode: Hold side OK and POWER buttons together and reset with stylus."
IF this doesnt work, and you cant connect to the pc, use the SD card method to flash the HTC rom.
sorry for this question. but the only one i find is exe files. where do i find "shipped" roms that are .nbh so i can install it with my SD ?
xatazch said:
sorry for this question. but the only one i find is exe files. where do i find "shipped" roms that are .nbh so i can install it with my SD ?
Click to expand...
Click to collapse
Download and install this ROM. http://rapidshare.com/files/46467733/HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe You can start from here. If your phone doesnt sync put into bootloader mode.
xatazch said:
sorry for this question. but the only one i find is exe files. where do i find "shipped" roms that are .nbh so i can install it with my SD ?
Click to expand...
Click to collapse
Extract the file with winrar or winzip, there will be a .nbh in there somewhere

pls help me rhodium from t mobil doesnt work after upgrade to 6.5

i have a new htc from t mobile i bought it from craigslist and i was proced to hard spl by this version Rhodium-HardSPL_V2_00R3_185HSPL.zip then i have a message that mean theflashage is done then i make a update to Rhodium_AF|HTC Sense 2.5|LEO 1.43 when it finish the phone doesnt work its stoped at the white screen and stays there im too upsed help me plssss
modelid RHOD210
Ok, please come down...
Let me guide and help you...
First of all it is good that you have done Hard-SPL !
So, if you ROM went BAD and you can not do anything with your Rhodium...
There is a thing that you can do...
Please, follow those steps:
1. Take the cover of the cell phone, and search for the SOFT-RESET hole at the
RIGHT (other side from the VOLUME up/down).
2. Press the VOLUME DOWN, hold it and than SOFT-RESET.
It will take you to tree colour page for BootLoader screen.
3. Connect the device to the computer and try to Flash the ROM again
(or other ROM...).
Good Luck !!
Any help, just ask for it...
hi
Doesn't work from boot laoder too I think the is no radio flash because I can't see olinex in trial color just 5 or 6 Kobe of numr
i think the Hard SPL V2_00R3_185 file you downloaded is corrupted. i also downloaded today but couldn't extract it.
That s mean my device is brick dead
Try this: Download any GSM ROM from this forum (I like EnergyROM Leo), unzip it, and rename the .nbh to "RHODIMG.nbh" (without the quotes) if it isn't already called that. Copy that onto a MicroSD card (that is formatted to FAT32), and put that in your device. Now, go into the bootloader (power off the device, then press Power and Volume Down) then follow the instructions. Hopefully you just had a bad flash, and reflashing will solve it.
I will try but I think my phone is no radio flashed yet bcuz I can't see olinex in bootloader
correzzola said:
I will try but I think my phone is no radio flashed yet bcuz I can't see olinex in bootloader
Click to expand...
Click to collapse
Oh, if it doesn't say 0.85.OliNex, then you're still on a stock SPL, so my suggestion won't work. Try flashing the TMobile stock ROM for your device, and retry the HardSPL process (I would advise redownloading everything to ensure it's not corrupt).
So how canine flash t mObile stock rom
0.79.0000 stock SPL
i have this number in tricolor that mean my device is Relocker bcuz i m was make it by RhodiumSPLRelocker_079SPL.zip so now the phone dosnt accdpte flashage by Rhodium-HardSPL_V1_20R2_185HSPL.zip
this is a tricolor screen
RHOD210 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (LED) v4
turbo HW/TURBO SW
TP MFG DATA
504,522,816,847
808,192,195,192
201,849 calibrated
and this is my start page froozen its stay here with this nuber down left
B 80
R 3.45.25.14
P 61.27t.25.23u
D Energy ROM
correzzola said:
0.79.0000 stock SPL
i have this number in tricolor that mean my device is Relocker bcuz i m was make it by RhodiumSPLRelocker_079SPL.zip so now the phone dosnt accdpte flashage by Rhodium-HardSPL_V1_20R2_185HSPL.zip
Click to expand...
Click to collapse
have you tried reflash HardSPL_v1_20R_185HSPL yet?
It also might helps you guys...
I have managed a Full Package of Hard-Spl Oilnex that WORKS!
Download the Package here...
After download and UnRAR it, you will find anything you need for Hard-Spl and the Original Tutorial
For Flash and for Stock Restore...
Enjoy!
Calm down
First of all, posting 2 new threads and commenting in the NRG thread is called spamming, stop it. It'll be much easier for you to get the help you need by sticking with one thread (I imagine the Mod is going to do that for you). Second, blasting your email address and phone number publically is bad practice, you open yourself up for a massive email spam list and phone pranks. I suggest you go in and edit your post as soon as possible and delete that information out. Thirdly, I'm guessing English is not your native language, if it isn't I suggest typing the problem out in your own language, use a translation software (I think Google Docs has this feature), and post the translation into the forum. This will help with clarity of what's going on.
Now with all that said, my final suggestion would be to tell us exactly what you have done to the phone IN THE ORDER that you've done it, up until the point that you're at now. Also, being that you bought this phone off a craigslist (another mistake imho, I'd rather just spend the extra $$ for the warranty and piece of mind that it's from the manufacturer/carrier directly), tell us what condition the phone was in to begin with. Did it come with NRGZ ROM preloaded, or the stock ROM? Was it locking up before you decided to reflash? Did you read the Flashing Guide stickied to the top of this forum before flashing your phone? (If not, let this serve as a reminder to all other newbie's looking to flash to READ BEFORE YOUR MOD!)
We're going to try and help you, correzzola, but you need to take a breath and calm down. It's just a phone, granted a lot of money, but you're not suffering onto the point of bloodshed so it's all going to be okay.
From the look of it, you HardSPL'd, flashed a cooked ROM, then removed HardSPL. Huh... that's probably not good. Try flashing this T-Mobile US ROM (I'm assuming you have a T-Mobile US TP2) while in the bootloader, and see if that solves it (or even flashes at all). If that doesn't work, I'm honestly not 100% sure what to do next, since I've never heard of anyone doing this before.
Firstly, STOP SPAMMING THE BOARD!!! - you will only annoy people and make them less likely to help you.
Secondly, Read what Dave (the Tytn Guy) has posted and let us know what happens, any more problems post in this thread and I'll see what I can suggest.
Dave
itry this rom too but doesnt work TMOUS Stock Shipped Rom 1.20.531.4 (51986) WWE
i think this step is responsable of my probleme Stock/Shipped SPL by RhodiumSPLRelocker_079SPL.zip

Flashing can't start, and cant't find solution the after searching the forum

So as you can figure out from the thread title I have a problem flashing my htc diamond.
I have installed a HardSPL version 1.30 OliNex, I can confirm that becouse on the three color screen there is a text saying "1.30 OliNex".
I still have the original ROM that comes with the phone when I bought it, so this meant to be my first flashing.
I want to flash the phone with this rom http://forum.xda-developers.com/showthread.php?t=593678 it is a WM 6.5 based ROM.
Because in the ROM package there wasn't a ROMUpdateUtility.exe I used it from other ROM package.
Connected via ActiveSync and followed the wizard. The phone reset and there came a gray screen with a progress bar. Now both progress bars on the phone and on the PC screen remain 0% and after a wile RUU finished with 262 ERROR Connection error, see the attached picture.
After that I tried to flash it from Internal Storage. A followed the steps according the procedure, and after the three colored screen it came the gray screen with "Loading..." message. I waited for almost 30 minutes and nothing happened.
What seems to be the problem?
I assumed about firewall disabling the connection. But I turned off the firewall and again the same story.
Then somewhere I found that there is incompatibility with the RUU and HardSPL version, but tried to flash with the same RUU that I used when I was installing HardSPL.
Then I tough that the problem is about flashing unsigned ROM on a signed HSPL, but it is not that the ROM is signed.
I am afraid to use MTTY so I don't brick my phone, because this is my first time flashing a Diamond.
I'm confused What seems to be the problem?
Any help can be welcomed.
Could this be indication of a hardware problem? When waiting for the "Loading..." message disappear the back cover warms a little.
Thanks.
1. Did you use the RUU from my thread?
2. NEVER USE AN H-SPL RUU TO FLASH ANYTHING OTHER THAN H-SPL!
3. is this a CMDA phone. IE, what network are you on?
Well no I didn't use the RUU from your thread, I've used a RUU from other ROM package.
This is not a CDMA phone I'm on T-Mobile Macedonia network. And the phone looks like this
On other Macedonian forum they told me it is a hardware problem. Can this be true?
So what do you think about my problem?
Well no I didn't use the RUU from your thread, I've used a RUU from other ROM package.
This is not a CDMA phone I'm on T-Mobile Macedonia network. And the phone looks like this
On other Macedonian forum they told me it is a hardware problem. Can this be true?
So what do you think about my problem?
EDIT: I did tried the RUU you recommended in your thread but it's the same.
I think it is in the PDA.
Configure active sync, and uncheck "allow usb connection" and try again.
For updating from internal storage you must have to copy the rom to the root of internal storage with a special name, ""diamimg.nbh"
Hmmm..
What he said... and...
Should have used one of the earlier SPLs. you only need to use the latest one if you are having problems with the older versions. I have the same diamond and used an early SPL.
Upgrade the radio rom first and go with a rom that's version 6.1 not 6.5 as most 6.5 roms now pack the Sense application.. (IMO Non-Sense, Senseless (Not enought ram or responsiveness))
Old roms here
http://forum.xda-developers.com/showthread.php?t=470757
Give olinex some cash for his Diamond Unlocker as this is the surefire way to fix it.
johnyboy_ said:
Configure active sync, and uncheck "allow usb connection" and try again.
For updating from internal storage you must have to copy the rom to the root of internal storage with a special name, ""diamimg.nbh"
Click to expand...
Click to collapse
The connection between PC and PDA is made, because as I said there is a progress bar on the phone screen too.
djfuego said:
What he said... and...
Should have used one of the earlier SPLs. you only need to use the latest one if you are having problems with the older versions. I have the same diamond and used an early SPL.
Upgrade the radio rom first and go with a rom that's version 6.1 not 6.5 as most 6.5 roms now pack the Sense application.. (IMO Non-Sense, Senseless (Not enought ram or responsiveness))
Old roms here
http://forum.xda-developers.com/showthread.php?t=470757
Give olinex some cash for his Diamond Unlocker as this is the surefire way to fix it.
Click to expand...
Click to collapse
As I understand you, you are saying to install later version of Hard SPL right?
So to install a new version of Hard SPL I just need to do the same procedure as the first time, or I have to uninstall the previous one?
And please help me which version of Hard SPL is safest to install? I'm afraid of the developer versions or maybe they aren't so scary
Are you a 100% positive it is the HardSPL?
djandreski said:
And please help me which version of Hard SPL is safest to install? I'm afraid of the developer versions or maybe they aren't so scary
Are you a 100% positive it is the HardSPL?
Click to expand...
Click to collapse
Presuming from your post, you are using a signed Olinex SPL, i doubt that the rom has been signed be OliNex, the only difference with Dev is you can flash any Rom, flash the Dev one from my thread, nothing to be afraid of
Good Luck
Badwolve1
What are the steps of installing new SPL?
Do I just need to do the same procedure as the first time, or I have to uninstall the previous one(somehow)?
UPDATE: I did it, I successfully flashed my Diamond PDA! It seams that the problem was in the SPL I installed 1.40 OliNex Unsigned and it flashed like a charm. Thanks guys for the help. Now this thread can be closed, or do I have to close it myself.
Great!
Glad it all worked out

Categories

Resources