HELP: stuck in boot up and format (samsung i780) - Upgrading, Modifying and Unlocking

Hi guys,
im new in here. i upgraded my phone to wm 6.1 (dxhd1) using singapore. after i followed the instructions, found on this site:
http://www.samsungmobile.com/support/i780/sg/subDx_Vista.jsp
my phone was stuck on the samsung logo..i tried to perform hard reset but keeps on saying "formatting" i left it for almost 6hours and nothing happens.
hope you can help..thanks!

Related

Need help ! cingular 8125 bricked :(

Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.
Have you tried flashing from the bootloader to an official rom?
thanks for reverting, i have tried that too, but of no use.
Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .
i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.
Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.
Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!

XDA star stuck in Boot-Mode - need help !

Hi i am a newbee in this forum and i have trouble with my XDA star (nike), because it stucks in boot-mode and i can not get it alive....
Her is what i did:
- i installed the CleanBlack2ReloadedOffice in german on my XDA Star - it worked perfectly ...
- Today i wanted to upgrade the radio from Nike_Radio_1.58.16.27 to the better one Nike_Radio_1.58.21.23_25.65.30.04S_Modded.
Result: the flashing stopped with 99% an now i am stuck on this boot-screen and my phone is a brick :-( It says:
RUUNBH
NIKI300
SPL-1.16.0000
CPLD-4
I tried several things to get the phone alive - but nothing helped every trial failed with the grey screen and a 0% on it - some 5 Minutes later aborted with error.
I copied the sspl-1.16-nike.exe on the device and started the Update. It stuck on 99% - ended with an error.
But now i am not able to install hard spl or anything else? I allways get the 0%-Load-Screen on the device and after 10 Minutes an 262-Error.
I tried now to load every shipped original rom - but the Rainbow-Start-Screen does not go away. Is there any other chance to get this device again working? Did anyone made experiences with this strange behavior?
I really would be glad, if there is a "howto" get into a working communication process between my "Pc" and my phone? Is there hope to get this device running? Any helpfull advices? Thanks in advance

Urgent help: HTS P3300 stuck up

Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
HTC P3300
Follow this link and have a deep read
http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis

Need help Samsung Tab 3 T210R Stuck in Samsung Loop

I am no expert like some of you in the community and I am not novice, I've rooted/installed Roms/ unbricked devices before. I purchased a Samsung Tab 3 T210R that was stuck in the Samsung loop. Upon receiving the Tab 3 I reset to default and wipe cache, it then restated and took me to the set up process if the device (like logging into my Samsung acct, setting up date/time) but it would freeze through the process. So, I then I followed everything stated in this thread http://forum.xda-developers.com/showthread.php?t=2459734 ..after following the steps in the thread I got a "kernel panic" message. I followed the task a second & third time using the first two links in Sammobile (Canada and Cellular South), the device now stays in the Samsung loop and sometimes shows a pixelated/ distorted Samsung logo.
Since I bought the device on eBay "as-is", I don't know what Android version was installed, but from the looks of it, it may have been a stock rom. I do know the model number is T210R 8 GB WiFi. I hope you guys can guide me and explain how to fix this issue. I would truly appreciate your help!
I forgot to mention after rebooting it to wipe cache/reset there's a message in red that reads " E: failed to verify whole-file"
Thanks in advance!

Samsung S4 Mini I9195 Boot Loop question ...

Hello all,
Last week i was watching a game on my phone, when my phone suddenly crashed. I can't seem to get it working anymore.
It boots until the Samsung logo comes on, and then it stops at that screen. The light come on and off but it doesn't do anything else.
I have erased the memory and cache via the recovery boot, but to no avail.
It's the I9195XXSCQA7 model. I looked at sammobile for the file, but the closest i got was a Russian Android version ( I9195XXSCQAG )
Can anyone help me out please? Clueless over here....

Categories

Resources