Develop Bugs

Notification Question

Hi, I have the IMate PDA2k (Blue Angel).
Here is my question. When you are connected via Bluetooth Headset and GPRS you get the little icon at the top (the one that would normally show if you are not using bluetooth and just GPRS and you got a missed call, the one with the bubble that its trying to tell you something). Now when I run bluetooth headset and gprs it shows the bubble icon. Everytime I load my phone up I think I had a missed call or a SMS message. Then I go to click on it to check and it just shows the GPRS icon and bluetooth headset icon.
Is there any way to change this? To have them appear side by side? I think it did this on the HP 6315 but I am not sure..
I know that wisbar would do this but they still are working on their phone edition version.
Thanks!!
John

Wierd problem with TomTom 5.0!

Hi! Im using an iMate PDA2K with TomTom navigator 5.1 and a GlobalSat BT 338 receiver. Everything works but sometimes after using TT,I notice that the bluetooth icon in the lower tray has disappeared.I then have to go and click on the Run BT Tray file in the windows/startup folder to get it back.
anyone know why this is happening and the solution for this?
thanks in advance.
Kaz

Hi
Cant help but I have a very similar problem.
Tomtom turns my BT off on exit from tt.
On some occassions the whole of BT manager and settings have frozen!
hope someone can help!

Just configure ir for normal cable gps instead of bluetooth...

hi
what is ir? what steps do i need to take? :shock:

I think the "ir" was a typo for it.....
I have configured it for "other wired GPS receiver and like I said, it works fine but sometimes (more often lately) when I exit from TT, the BT icon is not there in the system tray...

Have you got anything like the O2 active interface loaded onto the device, - if so get rid of it. This causes all sorts of instability, Once deleted mines been great, and with the new ROM from O2, its even better - Mike

nope, mine is the iMate version without any of the O2 stuff....
it's like the BT icon disappears randomly from the system tray....going to File Explorer and then the windows/startup folder and clicking on Run_BTTray gets it back.....and the BT works fine too..... :? :shock:
I have the 1.40 iMate ROM and apart from this,every thing seems to be peachy.....anyone got any clues what's going on????something is "closing" the BT in the system tray..how do I find out what it is and stop it....

HTC P3300 and PARROT CK-3100

I use the Bluetooth connection between the HTC and the Parrot and it works just fine in my car…. As far as the phone hand-free functions are concerned.
When I installed TomTom (ver. 6) on the HTC I assumed that the voice of the navigator would also come out through the car speakers connected to the Parrot.
This is not happening! The phone conversations are going through the Parrot and INDEPENDENTLY the TomTom voice comes out of the HTC!
This creates quite a mess when I am driving (while TomTom navigates) and I get a phone call: TomTom keeps on talking over the phone conversation and most of the HTC screen is covered by the “incoming phone call” notification!
Moreover the ringtone of the HTC does not seem to work when connected to the Parrot and only a very feeble chime is there to signal an incoming call.
Does anyone have a solution to fix this inconvenient situation?
Thanks in advance for the insight!

I've got the same setup as you and have the TomTom voices coming out of the phone which has been the same with my previous phones such as the SPV C550 and he HTC wizard. I think it's down to the bluetooth stack implementation on the Windows Mobile phone. My mobile mutes TomTom when I am in a call and I get a flashing mute icon shown on the TomTom screen.
One thing to try is the Jetware bluetooth extension http://www.jetwaremobile.com/ which is designed to improve compatability with the Parrot systems. It will certainly help you get the correct ringtones through the speakers, though I'm not sure if it will help with TomTom voices.
Neil

Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz

Thanks guys
Sorry I have been so busy lately I barely logged in the Forum. Just wanted to let you know that I have seen your replies and will look into the solutions you suggested. THANKS.. will get back to you soon with (hopefully positive)feedback

Vaguely related and possibly usefull information here:
http://www.modaco.com/Guide-to-usin...oneer-Bluetooth-Car-Stereoand39s-t252613.html

hotatomic said:
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Click to expand...
Click to collapse
Thanks hotatomic! I have installed that appz and it works!!! Great tip!
Any other useful tools for the P3300 we could exchange?
Cheers!
SiperX

Application audio over bluetooth?

Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans

If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike

vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz

Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!

Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!

Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker

No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.

vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok

Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker

i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks

Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.

how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate

Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.

i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?

Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.

Is there a working BT FTP Explorer for Touch HD / Blackstone ?

Hello,
I have really a strange issue. I am unable to "beam" the images from Touch HD to Bluetooth enabled PC using Bluetooth. I tested against two PCs and it never worked. The activesync works ok. But i don't want to use activesync... as it's a bit of overkill - i am looking for a out of a box solution that will possibly work with every pc everywhere... last time i ended up with mailing the images by email =))
Both sides have bluetooth enabled in visible mode, i am using either resco or wm file explorer beam function, then the list of visible bluetooth devices appears, but when i select the PC it always fails. =((
I remember there was some issue of "too much services pc provided", but i am unable to remove services provided by the pc i have no use for as FAX for example. On both PCs there's bluetooth stack by Widcomm, once branded for IBM and once for HP.

I have a PC with integrated bluetooth module and a Microsoft driver. If I right click on the Bluetooth icon in the system tray (lower right near clock), I can select "receive a file" which brings up a little wizard that waits for you to beam your picture. Maybe your Bluetooth device also has this software. I use ActiveSync for several pictures because in the long run it's quicker.

PGMMA, yes, but this is about widcomm driver... not ms... =(
Activesync is OK, but won't work on a PC without Activesync - i had an issue, when i want to send a image/file to a friend. No luck. The Bluetooth Stack Tray icon gets green for a sec, then white again with no message what so ever.
The other computer now requires pairing all the time, but i am sure i can handle that later. =)

Well i tested dryar 1.6 (i was unable to find the version 2.0 which should be on dryar.com) without a luck, but was able to make at least part of the bluetooth ftp explorer working (HTC_BT_FTP_Explorer_1.2.30489.cab)
i can share my files on cell phone, but i am unable to browse others after installing this file (couldn't enable the explorer in the ftp tab), when i click the icon in programs nothing happens.
anyone has a bt explorer fully compatible with blackstone / touch hd?

tried all versions from here, but simply \windows\btftpclient.exe won't start =(
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=3121049

identically problem

There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.

Vampire2800 said:
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Click to expand...
Click to collapse
I did attach the BT explorer that I using.

BT Explorer
Hi, So could you tell me did they fixed the problem, becouse my Bluetooth Explorer on HTC HD wouldn't start. I mark strat using BT but after click ok it's still unchecked !!! so finally is it solved this or not becouse it's a really disapointed accourding the price of this device.
Thanks
Vampire2800 said:
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Click to expand...
Click to collapse

gpaunescu said:
I did attach the BT explorer that I using.
Click to expand...
Click to collapse
It didn't work here? I got only the wait cursor for 2 seconds and nothing else...

SOLVED!! with help of kwbr,releasing his t8282 kitchen, btftp version is 1.2.37656.91, searching internet ,i find cab, it's simply to find :
h%ttp://ishare.iask.sina.com.cn/f/22305165.html
thank you kwbr