A few times I post in this forum for asking for help.
Everyones here seem busy to cook something that might never even been used till end of days!
So sorry if I have to use that title for getting attention from admin, advanced user and others masters.
I really need help.
All here I ask for is just "DRIVER FOR HP IPAQ 500 SERIES" when enter bootloader mode. I have Acivesync installed but cannot detect it. On my screen just popup a window ask for "USB DEVICE" driver....
A driver that I have search all over internet, but could not just find it.
Please I badly need your help sir.
Thanks for understanding my difficulty on searching.
BEST REGARDS,
HPDEBUG.
think it's a generic driver which one can get by putting in the windows install cd or let it use autoupdate
no NO.
It doesn't work.
I cannot find the driver in XP CD or any place else.
("I have Active sync installed")
Is there any special driver for this device when in bootloader mode?
Sorry I am new bie on this...
Plase help from any expert on this.
Best regards,
HPDebug
Related
I have an 02 XDA IIs
I just downloaded the ARM version of Pocket CMD.
Put my device in the cradle, and then run the install from my PC.
It then installed the app into my system memory.
My XDAIIs displayed a message "This program may not work correctly as it is designed for a previous version of windows" So I click OK.
Then go into programs and click the 'pocket cmd' icon and it says "Cannot Find pocketcmd.exe or one of it's componets"
Bugger.
Did I do something wrong, or does it just not generally work?
I urgently need telnet, it will make my life much easier!
Please Help
"This program may not work correctly as it is designed for a previous version of windows"
This is the entire answer..
Pocket CMD doesn't work under SE...
The error you get, isn't because of the SE incompability, but if you fix it.. ..it still won't work!
But you are lucky!
There are several telnet applications available that doesn't require CMD.
freewareppc.com has several that are free..
I use z-term, but this is not free..
Me, I need CMD to compile c++ on the device.. Not so easy to find a replacement application..
Sorted! :lol:
Many Thanks!!!
PocketCMD
you can download PocketCMD from here http://www.hpc.ru/soft/software.phtml?id=8396
Hello thank you for the site. Recently purchased a Dash from T-Mobile. Was following the directions according to the post: NEWCOMERS!!! Start here for UPGRADING WM 6 to 6.1 with PICS & various IMPORTANT LINKS by Mikey1022.
Chose to use Kavana’s 6.1 ROM.
I used the SDA Unlock Application, and then ran the RUU_Excalibur_WM61_Kavana_080408_WWE.
BUT, after the Rom finished installing and I got as far as the Which Voice Command Id like to choose, it restarted and then did not ask me which keyboard layout I would like to pick according to the step by step guide listed here: http://forum.xda-developers.com/showthread.php?t=415225
Question 1: Please, how can I get to that keyboard layout setup screen because currently my keymapping is all wrong.
Question 2: I was going to move on to next step of installing Tegic eT9 US English Keyboard Layout. But now my ACTIVESYNC WILL NO LONGER CONNECT. It just sits there when i plug it into the phone like its trying to connect and then gives me an error message that unable to connect to the connected smartphone and would I like to trouble shoot it using Windows trouble shooter( Which i did run and tells you nothing)
How can I get my Dash to connect to Activesync. Because currently Im so screwed... Cant connect to activesync, I cant reverse the changes I made, cant download the Tegic eT9 US English Keyboard Layout. I Cant do anything.
Any help is greatly appreciated. Im sure you all read posts like this often, and I did search the forum but was unable to find the answers to these tw questions so any time pent responding I greatly appreciate.
Thank you!
Check out Sticky: ActiveSync Issues/Questions it will help you recover your connection. Then install your Tegic eT9. Your almost there.
Do this with the USB cord DISCONNECTED from the computer.
Scroll down or up to the settings panel.
Select
Scroll right or left to USB to PC.
Select
UNCHECK the first option.
Connect the USB cord after you click on ok.
Then continue with installing the Tegic cab, for your keyboard mapping.
Thank you
Well I was never able to find the keyboard layput screen again, but just hoped for the best and installed the Tegic eT9 US English, and hoped it would automatically know I wanted to use those settings. Which it DID, thank god. So i can type now. Thank you!
And I unchecked the first box like you suggested Mikey ( Disable Advanced network functions in the usb menu) and it FIXED IT! PHEW....
So now that I know I can access my data and can type again on it, Just wanna say thanks for the great site. Love the ROM build and appreciate your guys' help.
Have a good weekend.
WOOT
Came here to see if I could help instead I got help thanks Mikey
Anytime guys.
Hello,
My HTC 3300 is blocked on Windows start screen.
I have hard reboot my device and un screen with 3 color appear.
When i plug my device with USB cable, my computer play a song to inform my device is well connected.
But when i launch Artemis USPL, a popup appear with the message : "No Device Connected : Would you like to try copying again ?" Yes, No, Cancel.
I'm blocked a this step.
Can you help me ?
Thx
PS: Sorry for my bad english. I'm french guy.
hi guys,
i have the same problem....
I was trying for the first time to upgrade my Artemis!!! I DIDN'T DO THAT!!!!
Please help me!
TNH
USPL only work if you are in WM. It doesn't work at the booloader.
Zecanilis said:
USPL only work if you are in WM. It doesn't work at the booloader.
Click to expand...
Click to collapse
yes... i know
i am reading.... i am looking for a solution.
I read on the POF USPL guide that probably (Unfortunately ) this problem should be caused by same PDAmobiz tool!!!!
i am being funny!!!
yet another bricked artemis owner
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
zikizile said:
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
Click to expand...
Click to collapse
It solved my problem: I've played around with some dll's on my Artemis and it won't boot anymore.
Just one thing: you must type password BsaD5SeoA, cause it's case sensitive.
THANK YOU VERY MUCH!!!
Hi guys,
i fixed my problem!!!!!
i flashed an official ROM (1.12.405) using a SD card (512mb)
now i'm going to work with ARTEMIS_USPL!!!! WOOOOWWWW
owner of a brick called artemis
glad it helped you solve problem...
when I was young I use to poke with programming...
but that was looooong time ago (remember zx spectrum?48 kb ram..haha)now you got it in your pocket(working if you're lucky guy, not like me)
Any way, point is:
never give up!!!!
Yes, I agree with you: NEVER GIVE UP!!!!
I'd like to help you, i'm not expert people on this work...
I just read a lot of good indications on this forum.
Good Luck
Thanks man,
I'm trying to find another motherboard,before I start playing with this one.
Maybe you know where to get one for artemis?(arte 200)Or someone with broken screen not willing to repair it?
cheers,
z
Hey guys,
I'm a newbie here, just joined last nite... I recently purchased a Touch Pro thru my local SPRINT Store. I was searchin' the web for an application that would allow me to record phone calls of my choice, and from what I can gather, ACR seems to be the way to go.....
So I read thru some posts here and decided to take it upon myself to give it a shot. Being that i'm rather ignorant to this sorta stuff, i'm a lil nervous about screwing something up.... I'm not an idiot, (well atleast not a complete one) but I am having some difficulties making this install go smoothly. I was able to download the 1.2.2. version to my phone. But the framework update doesn't quite seem to be going as smoothly......
I tried d/ling the 3.5 framework to my computer, then transfering it to my phone, but that didn't work.... Tried d/ling it on the phone itself, and it seems to have completely downloaded the file, but after that, nothing happened. I browsed thru the phone using file explorer to see if i could locate the NETCFSetupv35.msi file.....but cannot locate it any where.......
I'm sure this entire thread makes me look like a real dumbass, but i'm tryin my damndest to get this application to work, and it's frustrating the hell outta me cause i'm not that good at this stuff yet... Can someone point me in the right direction? I really appreciate the help, and atleast you all can have a good laugh at my ignornace.... you all make it look so easy, i'm very envious....
Is the 3.5 framework on the phone somewhere now since i downloaded the file? Do I just need to execute the file? or did it do that already and I'm just missing something??
I'm able to get the framework file on my phone. But for some reason, when ever I try to run it, it says there is no application associated with the file name. CAN SOMEONE PLEASE HELP ??? GIVE ME A HINT? ANYTHING? PLEASE???
plse check..
the following ( if you did ignore )
1. do you have windows mobile device centre, installed on you pc..?
if you have, connect phone with usb to pc.. sync... etc..,
if you have ..then.
install ...NETCFSetupv35.msi from pc... not phone ( it is not a .cab file, but .msi file ..so pc installation. ?
2,application will install from pc and tell you to check phone ,when required to do so ..install on device, not storage card of phone
thats it ...
good luck
Would also suggest you search in the Touch Pro forum as this is the HD forum
My sincere appologies. I did not realize I was posting in the wrong forum. I will direct my question to the proper place. Thank you.
Thread closed
Hello long time reader first time poster!
HELLO ALL!!!
Now to the good stuff,i am for the first time going to attempt to root my phone! (im excited!). i am however having a slight hiccup! i am following these instructions to install the drivers and adb etc... htcevohacks"dot"com/htc-evo-hacks/how-to-install-android-sdk-and-adb-drivers-for-htc-evo-4g/
i am stuck on installing the drivers. Int the device manager list i dont have the option "other devices" however i do have " adb" in the sub catagories i have HTC so i choose it and goto update driver i choose let me choose from a list of devices all i have to choose from is "MY HTC" idk what im doing wrong or where to go from here??!?
thanks for any help guys! hoping to have the froyo on my phone soon! i know it has some bugs but i rarely use camera and have no 4g in my area so im ready for some froyo!
http://forum.xda-developers.com/showthread.php?t=694250
Read that and you will be fine. It has links to the drivers you need.
You need help finding the correct forum?