Installing Pocket CMD - MDA III, XDA III, PDA2k, 9090 General

I have an 02 XDA IIs
I just downloaded the ARM version of Pocket CMD.
Put my device in the cradle, and then run the install from my PC.
It then installed the app into my system memory.
My XDAIIs displayed a message "This program may not work correctly as it is designed for a previous version of windows" So I click OK.
Then go into programs and click the 'pocket cmd' icon and it says "Cannot Find pocketcmd.exe or one of it's componets"
Bugger.
Did I do something wrong, or does it just not generally work?
I urgently need telnet, it will make my life much easier!
Please Help

"This program may not work correctly as it is designed for a previous version of windows"
This is the entire answer..
Pocket CMD doesn't work under SE...
The error you get, isn't because of the SE incompability, but if you fix it.. ..it still won't work!
But you are lucky!
There are several telnet applications available that doesn't require CMD.
freewareppc.com has several that are free..
I use z-term, but this is not free..
Me, I need CMD to compile c++ on the device.. Not so easy to find a replacement application..

Sorted! :lol:
Many Thanks!!!

PocketCMD
you can download PocketCMD from here http://www.hpc.ru/soft/software.phtml?id=8396

Related

Does WM6 have VB runtime? Needed for some applications!

HI,
I am trying to run this GPS application called GPS DIS 'GPS Driver Information Service and works with all PDAs running Pocket PC 2002 or higher
GPS DIS was developed for PocketPC 2002. With PocketPC 2003 you will have to install the appropriate VB runtime files.
I have loaded the VB Runtime files onto my P3600i as well as the GPS DIS. The install completes fully, and when i launch the application, i see the spinning microsoft icon indicating its loading then it disappears then returns then disappears again. (It does not lock up)
Then nothing actually loads.
Can someone help, possibly try to load this and let me know if they get a different response.
Does anyone know if VB runtime is included in WM6? If not, which is the best one to install into WM6?
thanks
polite bump,
surely some experts can shed some light on this.
bump bump.
I am also looking to find a vb runtime module for wm6.
pls, any one have any ideas how to achieve this.
As far as I Know there isn't anyone VB Runtime for WM6. Microsoft doesn't support it anymore. I also needed it...
PS: found a way to install it: Install in main memory or internal storage, not in SD. See: http://www.cebeans.com/runtime/runtime.htm
Hi Bicalho,
Can you tell me if GPS application called GPS DIS 'GPS Driver Information Service will run with your method?
Thanks!
GLO said:
HI,
I am trying to run this GPS application called GPS DIS 'GPS Driver Information Service and works with all PDAs running Pocket PC 2002 or higher
GPS DIS was developed for PocketPC 2002. With PocketPC 2003 you will have to install the appropriate VB runtime files.
I have loaded the VB Runtime files onto my P3600i as well as the GPS DIS. The install completes fully, and when i launch the application, i see the spinning microsoft icon indicating its loading then it disappears then returns then disappears again. (It does not lock up)
Then nothing actually loads.
Can someone help, possibly try to load this and let me know if they get a different response.
Click to expand...
Click to collapse
Download it from here http://msdn.microsoft.com/mobility/windowsmobile/downloads/evb_eula.aspx and install in Device memory...it should work.
I tried this again with some hope, but again, both apps GPSDIS and VBruntime install successfully and when launching GPSDIS i get the ' you have X times remaining for this trial' then that disappears and the spinning beach ball returns for a couple of seconds then dissapears and nothing.
The search continues...
any new ideas please

unable to update hx4700 2003 - MW6 using Bootloader!

I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil
Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
After extracting using WinRAR
Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.
Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.
Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk
Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.

HardSPL for Artemis

Hello,
Does anyone plan on developing HardSPL for the artemis... I don't want it to simunlock or anything JUST to have the exact features it has on the Hermes... flash anything... doesn't get overwritten.
I just switched from Hermes to Wings now this... and USPL seems less reliable... plus i can't install it with vista ...
Thanks
for the part about USPL not working on vista you can try this, worked for me!
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Thank you for your response...
I have tried the trick and it does NOT work in Vista 64...
The drivers are ok... but USPL refuses to run correctly.
any thoughts?
At what part does the program fail, and does it give any error or message?
Well... i start uspl_start and it opens a command window and starts displaying "Could not run 16 bit application.. please contact etc.... for a 32 bit or 64 bit executable"
Short of installing a 32 bit operating system (dual boot or in a virtual machine, like vmware, make sure it has usb passthrough) all you can do is wait for someone to create a version that does not use the same 16 bit code.
edit: kicking this thread so someone will notice it might help to

Installation of cab files throws errors

Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
its in one of your phone/device settings to let u download and install apps or cabs not digitally signed. thats all, i believe. just find it and check it off. or look for advanced config cab if u can find it and install that. it has an option in there also to let u download/install whatever..
mullethunter said:
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
Click to expand...
Click to collapse
The cab I have attached may help you...it's some SDK certificates that will allow installation of certain unsigned apps, but I don't know if this is what the ones you're running are requiring and missing. It won't harm anything to try this one, and you can easily uninstall it if it doesn't do the trick
Thanks guys. Sirphunkee - that cab actually installed, but I'm having the same problem. Another forum has suggested that I take the device back to T-Mobile, but it just seems like there's a setting that's not right in the OS. Demandarin - I've looked for various security permissions in the UI with no luck. I've mucked around with some Policy values in the registry per some threads on this forum, but still nothing.
I'll keep trying, and thanks.
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
mullethunter said:
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
Click to expand...
Click to collapse
Have you already installed .Net 3.5? It's a framework that many other programs use (and need) to install, and it's not on the TP2 by default...it's the only other think I could think of that would keep you from installing stuff. Cab is attached, if you don't have it already.
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
mullethunter said:
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
Click to expand...
Click to collapse
Well yeah what's weird is that I never had to use that to get any of those apps installed

[PROJ] Prescription Medicines Manager v0.9.0 17-03-2011

This app is designed so that you can keep track of any medications you take on a regular basis.
When you last ordered a particular drug, how many you currently have to hand, which surgery the repeat was requested from and which pharmacy filled the prescription.
It is designed to be used for multiple patients, surgeries, pharmacies and doctors.
It was initially an Access database but I thought that migrating it to my PPC was a challenge I might be able to complete.
There will also be the ability to log doctor's appointments as well, hopefully.
All data is currently stored in an SQL-CE database.
For reasons I am currently trying to solve, when you open any secondary form with a data table and then return to the main menu you are unable to go back into any other form again.
Changed to a tabbed layout, screen shots attached.
09/02/2011
New version attached with new format SQLCE.
17-Mar-2011
Latest version attached
All data entry and editing working - I hope.
08-Apr-2011
Latest version, autoscroll and popup SIP.
Possible dependant files.
I am coding for CF2.
[Reserved] - For Comments
deedee said:
[PROJ] Prescription Medicines Manager
...medications you take on a regular basis.
When you last ordered a particular drug, how many you currently have to hand, which surgery the repeat was requested from and which pharmacy filled the prescription...
Click to expand...
Click to collapse
Thank you!
These records can be life-saving if you have them with you at the right time. I have tried many systems of keeping track, but rarely managed to have anywhere close to this much information on hand.
I have not had time to try it out properly so I do not yet have any comments or suggestions. For now, I just wanted to say THANKS!
Glad it's going to be if use to someone.
Hopefully by the end of tonight I will have a new version up with the ability to add records to each of the tables. No interlinking yet and at the moment editing is also broken but I am getting there.
deedee said:
Glad it's going to be if use to someone.
Hopefully by the end of tonight I will have a new version up with the ability to add records to each of the tables. No interlinking yet and at the moment editing is also broken but I am getting there.
Click to expand...
Click to collapse
Don't feel rushed on my account. It's great that you're interested in this project, whenever you finish will be soon enough.
Meanwhile, I'll play with it and start planning how to "feed" it my information.
Have you considered some sort of encryption? It just occurred to me that it will hold a lot of very personal information.
Again, thank you.
deedee said:
...at the moment editing is also broken...
Click to expand...
Click to collapse
I know next to nothing about programming, but would the PC editor you wrote for the W Watcher calc work for this project? That might make it easier for the user to input the information AND save you some programming...
(BTW: I was very impressed with how quickly you developed those applications! Very usable and no charge for fast delivery!)
Jesterfell said:
I know next to nothing about programming, but would the PC editor you wrote for the W Watcher calc work for this project? That might make it easier for the user to input the information AND save you some programming...
(BTW: I was very impressed with how quickly you developed those applications! Very usable and no charge for fast delivery!)
Click to expand...
Click to collapse
Unfortunately the WW editor is designed for an XML file and this app keeps everything in an SQLCE database. I am trying to find a nice, useable and, more importantly, free desktop app to edit these files and am trying a couple out at present.
While a purely PC based editor would be easier from a WM coding point it would stop the app being completely mobile and standalone.
New version added to post 1.
You can now add records.
For desktop managemnent try
SQLCE Desktop Manager
FlyHoward SDF viewer
Neither of these seem to be free though the second one does have a 14 day trial.
deedee said:
... While a purely PC based editor would be easier from a WM coding point it would stop the app being completely mobile and standalone...
Click to expand...
Click to collapse
Of course!
Sorry, I got tunnel vision and forgot the project's purpose.
What am I missing?
I have been unable to run Prescription Medicines Manager on my HTC 8925 (Kaiser) with WM 6.5.x.
When I run the EXE all that happens is that the WM wait animation plays indefinitely until I switch to another application.
Since I play with this phone a lot, I hard reset it to clear any lingering results of my modding (it's a spare phone, so no great loss). Before installing other programs, I ran PMM again, but the same thing happened.
I got the same results with an even older HTC phone running WM 6.1.
SQL desktop applications
I found some free SQL desktop apps. I was only able to get one, SdfBrowser, to read MedicalRecords.sdf and all it allowed was viewing the structure and creating a query.
I'll keep looking, but I agree with you that being totally portable is very important for this project.
LINKS: SdfBrowser --- Resources link
Jesterfell said:
I have been unable to run Prescription Medicines Manager on my HTC 8925 (Kaiser) with WM 6.5.x.
When I run the EXE all that happens is that the WM wait animation plays indefinitely until I switch to another application.
Since I play with this phone a lot, I hard reset it to clear any lingering results of my modding (it's a spare phone, so no great loss). Before installing other programs, I ran PMM again, but the same thing happened.
I got the same results with an even older HTC phone running WM 6.1.
Click to expand...
Click to collapse
Completely forgot to say, you will need to install SQL CE on your HTC.
I do not usually resort to smileys, but my lack of knowledge is frustrating!
deedee said:
Completely forgot to say, you will need to install SQL CE on your HTC.
Click to expand...
Click to collapse
I installed SQL CE with no errors but got the same lack of results. The phone did become VERY sluggish and Task Manager still showed "prjMedicalRecords" running as a process.
Does prjMedicalRecords.exe need to be installed?
I just executed it from the SD card, and then tried it from the device memory. I placed MedicalRecords.sdf in the same directory each time.
Update: After about 5 min of the WM wait animation spinning, got the following error message:
"File or assembly name 'System.Data.SqlServerCe,Version 3.0.3600.0, Culture=neutral, PublicKeyToken=3BE235DF1C8D2AD3', or one of its dependencies, was not found."
I opened the SQL CE .CAB file and it DOES contain "system.data.sqlserverce.dll" it is meant to be installed to "%InstallDir%" and the rest of the DLLs go to "%InstallDir%\v3.5". I used file explorer to look in those directories (%InstallDir%="Microsoft SQL Server Compact Edition") but did NOT find "system.data.sqlserverce.dll" in either dir.
I copied the DLL to "%InstallDir%\v3.5" and ran the program again. The same results occurred.
After soft reset, copied the DLL to "%InstallDir%" and ran PMM again. The same thing happened, long wait, then error msg.
I am falling asleep now, but will try re-installing .NET 3.5 and running PMM again. I'll let you know what happens.
I had gotten the same error before installing SQL CE but did not connect the error to PMM so I ignored it. This time nothing else was happening on the phone.
Apologies for not giving the initial steps, I am new to development and forget others need to be given the assumptions.
SQLCE needs to be installed, as you have done. PMM is just an exe, copy it to the device.
PMM and the SDF file need to be placed in \Program Files\prjMedicalRecords on the device itself. At the moment this location is hard coded and is on my list of things to do to make it "moveable". HTH
New version in post 1 that is now independent of location, just make sure both exe and SDf are in thhe same place.
deedee said:
New version in post 1 that is now independent of location, just make sure both exe and SDf are in thhe same place.
Click to expand...
Click to collapse
Sorry, Deedee. It still does the same thing.
.1. I put both files in device memory (just in case): \Program Files\prjMedicalRecords\
.2. Tried to re-install NET framework 3.5--it refused to install in either device or card memory, saying the same version was already in ROM.
.3. Re-installed sqlceppcwce5armv4i.cab
.4. Ran prjMedicalRecords.exe
After the same delay, it gave the same error.
It also gave a NET error that, because of the delay between program launch and errors, I did not associate with Medical Records before, but it only occurs after I have launched prjMedicalRecords.exe:
"The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET compact Framework is recommended. Support info: -2147483643 (80000005)"​
Thank you for your continued interest.
Not sure what the error is pointing to but I am coding for .Net CF v2, CAB in post 2, try installing this.
OK, finally tried this on a virgin device, without using the "debug" option in VS2005 to copy the files and discovered that .NET CF2, along with SQLCE 3 and SQL CE 3 replication is needed.
All CABs are in post 2.
There is a new version hopefully out this weekend with the ability to log patient medications and doctors appointments.
Editing is still on the road map, as is deletion.
New version in post #1, CAB format as well.
Make sure all the dependencies are installed, for me this has been .NET CF2 and the SQLCE cabs.
There are bugs I am aware of but please list anything and everything. As this is my first real App any feedback is welcome.

Categories

Resources