Hi i flashed this ChronicROM and when it finished it won't boot annymore,
i only see the schreen displaying toutch diamond.
Annyone have an idea how i can flash an other rom?
Or is it really bricked?
i can't afford an new one richt now so if there is an fix
It's not bricked.
Put it back into bootloader, flash the original factory ROM and presto you are good to go again.
Regards,
EqX
then you can have a look at
http://forum.xda-developers.com/showthread.php?t=416211
the-equinoxe said:
It's not bricked.
Put it back into bootloader, flash the original factory ROM and presto you are good to go again.
Regards,
EqX
Click to expand...
Click to collapse
how do i put it into the bootloader becouse it dous nothing wjtch keystroke/hold do i need to make plz help
Your radio is outdated. Latest stock will fix you up. Bootloader is soft reset volume up and power button.
soft reset
Windows mobile dousnt start i had an custom rom with an updated radio rom and an custom hardspl and everything but i tried this rom and it won't boot.
absolutely nothing loads i have the feeling.
or i'm doing it wrong but i think the soft reset isn't working in my case
nemesis88 said:
Windows mobile dousnt start i had an custom rom with an updated radio rom and an custom hardspl and everything but i tried this rom and it won't boot.
absolutely nothing loads i have the feeling.
or i'm doing it wrong but i think the soft reset isn't working in my case
Click to expand...
Click to collapse
see if this works soft reset then hold the volume down button
Flash a Factory/Original/Shipped ROM! That should solve most probably!
Carty said:
Flash a Factory/Original/Shipped ROM! That should solve most probably!
Click to expand...
Click to collapse
Im going to thy it but i still havent got it in anny service mode what so ever
i'm noob
Just got it into service mode now i can flash thanx for the effort
wtf man.. next time use more of your brain and read at what other users write to you what to do. From the beginning they've told u to put it on bootloader and u wouldnt listen.. if i were them i would be offended by your behaviour
eedvard said:
wtf man.. next time use more of your brain and read at what other users write to you what to do. From the beginning they've told u to put it on bootloader and u wouldnt listen.. if i were them i would be offended by your behaviour
Click to expand...
Click to collapse
This was my first bad flash after i got the phone so can't help it that i thought that i bricked it, and not everyone is as good as an developer as u apperantley if it isn't worth youre time just don't reply if u're just *****ing
Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
MOD EDIT: Can you help, I flashed my GSM diamond with the CDMA hard SPL from PPCGeeks: http://forum.ppcgeeks.com/showthread.php?t=36062
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Please post in the thread where you got it from!
You'll get an answer, and there will be fewer threads lying around here!
i don't understand what do u mean by this ?
now i use solution from
http://forum.ppcgeeks.com/showthread.php?t=36062
after write rom my htc is totaly dead can't power on
any solution to recover it
hbstun said:
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Click to expand...
Click to collapse
He means you should ask in the thread where you found this information above.
Code:
First and foremost...
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
hbstun said:
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
Click to expand...
Click to collapse
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
aE3-ink said:
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
Click to expand...
Click to collapse
nothing hen i put usb cable nothing in the screen
Kevbodian said:
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
Click to expand...
Click to collapse
what do u mean by jtag and how i can do it ?
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Serves you right for using a leaked unlocker program - Should have gone here . thanks to Olipro as the leaked version was buggy.
I do hope you get this fixed though. (I would help if I could really).
DaveShaw said:
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Click to expand...
Click to collapse
can't enter bootloader ?
hbstun said:
can't enter bootloader ?
Click to expand...
Click to collapse
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
DaveShaw said:
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
Click to expand...
Click to collapse
ok thx anyway for your help
R3PUBL1K said:
Serves you right for using a leaked unlocker program - no sympathy or help from me.
Should have gone here thanks to Olipro as the leaked version was buggy
Click to expand...
Click to collapse
I think he tried the unlock before he flashed the cdma hardspl.
Kevbodian said:
I think he tried the unlock before he flashed the cdma hardspl.
Click to expand...
Click to collapse
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
You must eter in "USB Trigger Mode"
hbstun said:
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
Click to expand...
Click to collapse
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
kokocf said:
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
Click to expand...
Click to collapse
can't enter bootloader like u sad !
hbstun said:
can't enter bootloader like u sad !
Click to expand...
Click to collapse
Hello there! Where have you blocked, exactly ...?
i flashed with aztor 2.03 and it is stuck on the TOUCHDiamond screen then turns off and starts again.
HELP! Can I fix it?
galinsky said:
i flashed with aztor 2.03 and it is stuck on the TOUCHDiamond screen then turns off and starts again.
HELP! Can I fix it?
Click to expand...
Click to collapse
Try to do a hard reset?
Keep us posted as to what stage your at. Just a reminder if you haven't already. Internally Flashing Roms/Radios is the safest way to go.
galinsky said:
i flashed with aztor 2.03 and it is stuck on the TOUCHDiamond screen then turns off and starts again.
HELP! Can I fix it?
Click to expand...
Click to collapse
Volume down + Soft reset will enter boot mode and flash it again via usb
Yeah there is a way to fix it, but you should read a few threads before flashing! I hate topics like "HEEEEEEELP ME PLEEEEASE MY PHONE IS BRICK"
any way: enter phone in bootloader mode and flash with RUU then
I guess you don't know about entering bootloader mode so: press volume down and reset simultaneously
Next time read the forum!
Edit: baadnewz was quicker
Don't worry either. The only time you bricked your device is when you cannot go into bootloader mode. If you can't see the tri-colour screen, then your device is "bricked". Even in this state you can unbrick via Jtag or send for service and hopefully get a replacement.
Sorry for the newbish title ... I justmoved from a vogue to this and panic set in quickly! i got it into boot mode then reflashed it. works fine now ...
galinsky said:
Sorry for the newbish title ... I justmoved from a vogue to this and panic set in quickly! i got it into boot mode then reflashed it. works fine now ...
Click to expand...
Click to collapse
Issue resolved, thread closed.
Help, flashed to revrom v7 now to start it was fine then the touch screen froze. Reset but now it hangs at the HTC Hermes splash screen. Nothing i do seems to sort it. As a newbie i did a real **** up i did not install the hard spl. Can this be resolved only just got the thing. Any help please.
Did you try a hard reset? hold the left and right softkeys (above the windows and ok keys on the front) while pressing the reset. maybe you'll get lucky?
You also might be able to put the phone into bootloader and flash a stock shipped rom.
Thanks, Hard Reset did the job.
Now make sure you install hardspl!
boog321 said:
Now make sure you install hardspl!
Click to expand...
Click to collapse
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
inergen said:
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
Click to expand...
Click to collapse
OK first of All tell us what do U have, which Rom R U using.
Second of all tell us what happens after HR.
Don't be shy, open up!
inergen said:
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
Click to expand...
Click to collapse
Yup, just like D_NazGUL said, we need a bit more info. But maybe this will get you started.
Hopefully you have hardspl v7 (spl 2.10 Olipro) on your phone, that way you could just flash from sd card. if so, flash the at&t stripped rom, then back to the custom rom.
If you don't have hardspl, then you need to try to flash your original stock shipped rom, then hard spl, then back to the rom of your choice.
Then, before flashing a custom rom, flash the at&t stripped rom. Always flash the stripped rom between custom roms.
i'm kind of gun shy to flash my new tp2 since i bricked my old 8525. the first two flashes worked great then the last rom bricked my phone and doesnt get out of the loading screan. So i dont know if I got a bad rom or if i did something else? Any suggestions
I thought that as long as you don't flash the boot you can reflash?
I did a flash from SD-card since the device won't connect to my PC anymore
Did you flash HardSPL first?
ryj01 said:
i'm kind of gun shy to flash my new tp2 since i bricked my old 8525. the first two flashes worked great then the last rom bricked my phone and doesnt get out of the loading screan. So i dont know if I got a bad rom or if i did something else? Any suggestions
Click to expand...
Click to collapse
As long as you follow this guid all should be ok:
http://forum.xda-developers.com/showthread.php?t=550540
runemaster said:
Did you flash HardSPL first?
Click to expand...
Click to collapse
Yes I can get to the boatloader screen but i cant get a pc connection and it just says analyzing and then it turns off after like 15 min.
If you're stuck at bootloader then use SD flash method to re-flash a rom.