Help, flashed to revrom v7 now to start it was fine then the touch screen froze. Reset but now it hangs at the HTC Hermes splash screen. Nothing i do seems to sort it. As a newbie i did a real **** up i did not install the hard spl. Can this be resolved only just got the thing. Any help please.
Did you try a hard reset? hold the left and right softkeys (above the windows and ok keys on the front) while pressing the reset. maybe you'll get lucky?
You also might be able to put the phone into bootloader and flash a stock shipped rom.
Thanks, Hard Reset did the job.
Now make sure you install hardspl!
boog321 said:
Now make sure you install hardspl!
Click to expand...
Click to collapse
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
inergen said:
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
Click to expand...
Click to collapse
OK first of All tell us what do U have, which Rom R U using.
Second of all tell us what happens after HR.
Don't be shy, open up!
inergen said:
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
Click to expand...
Click to collapse
Yup, just like D_NazGUL said, we need a bit more info. But maybe this will get you started.
Hopefully you have hardspl v7 (spl 2.10 Olipro) on your phone, that way you could just flash from sd card. if so, flash the at&t stripped rom, then back to the custom rom.
If you don't have hardspl, then you need to try to flash your original stock shipped rom, then hard spl, then back to the rom of your choice.
Then, before flashing a custom rom, flash the at&t stripped rom. Always flash the stripped rom between custom roms.
Related
Hi i flashed this ChronicROM and when it finished it won't boot annymore,
i only see the schreen displaying toutch diamond.
Annyone have an idea how i can flash an other rom?
Or is it really bricked?
i can't afford an new one richt now so if there is an fix
It's not bricked.
Put it back into bootloader, flash the original factory ROM and presto you are good to go again.
Regards,
EqX
then you can have a look at
http://forum.xda-developers.com/showthread.php?t=416211
the-equinoxe said:
It's not bricked.
Put it back into bootloader, flash the original factory ROM and presto you are good to go again.
Regards,
EqX
Click to expand...
Click to collapse
how do i put it into the bootloader becouse it dous nothing wjtch keystroke/hold do i need to make plz help
Your radio is outdated. Latest stock will fix you up. Bootloader is soft reset volume up and power button.
soft reset
Windows mobile dousnt start i had an custom rom with an updated radio rom and an custom hardspl and everything but i tried this rom and it won't boot.
absolutely nothing loads i have the feeling.
or i'm doing it wrong but i think the soft reset isn't working in my case
nemesis88 said:
Windows mobile dousnt start i had an custom rom with an updated radio rom and an custom hardspl and everything but i tried this rom and it won't boot.
absolutely nothing loads i have the feeling.
or i'm doing it wrong but i think the soft reset isn't working in my case
Click to expand...
Click to collapse
see if this works soft reset then hold the volume down button
Flash a Factory/Original/Shipped ROM! That should solve most probably!
Carty said:
Flash a Factory/Original/Shipped ROM! That should solve most probably!
Click to expand...
Click to collapse
Im going to thy it but i still havent got it in anny service mode what so ever
i'm noob
Just got it into service mode now i can flash thanx for the effort
wtf man.. next time use more of your brain and read at what other users write to you what to do. From the beginning they've told u to put it on bootloader and u wouldnt listen.. if i were them i would be offended by your behaviour
eedvard said:
wtf man.. next time use more of your brain and read at what other users write to you what to do. From the beginning they've told u to put it on bootloader and u wouldnt listen.. if i were them i would be offended by your behaviour
Click to expand...
Click to collapse
This was my first bad flash after i got the phone so can't help it that i thought that i bricked it, and not everyone is as good as an developer as u apperantley if it isn't worth youre time just don't reply if u're just *****ing
i have flashed my diamond with the official htc rom
im on 1.40 olinex, now i can only access boot mode.
sometimes if i leave the phone without a battery for like 2 hours, when i turn it on i see the "touch diamond" logo, if i leave the battery for a whole day i see the windows mobile loading screen, but then suddenly the phone turns off
plz if you have any idea about this problem help me
If you can acces bootloader, then your diamond isn't bricked.
Try the unsigned version of olinex' hard-SPL and flash the ROM again.
Good luck!
hey ElCondor, im on 1.40 olinex, i cant flash it because it is protected
how can i flash the unsigned 1.40 olinex one?
Here is a link to the unsigned hard-spl.
Make sure you download "Unsigned-Hard-SPL-Diamond-OliNex.zip".
Follow the instructions:
1) Download, extract to an empty folder.
2) Run RomUpdateUtility.exe, Have Phone Synced with PC (go into bootloader, connect your cable, then the word "serial" in bootloader will change into "USB".
3) follow steps, check device for prompts after PC shows loading bar. it should go to black screen now.
4) SPL flashes, device automatically reboots, job done.
5) to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Installing this will hard-reset your device.
Best Regards,
ElCondor
when i flashed the unsigned 1.40 olinex, the device rebooted
windows mobile is preparing your phone for first use
htc logo
phone went off :S
will try flashing rom again
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
mzaouar said:
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
Click to expand...
Click to collapse
Hi
If you can access the bootloader then your device is not bricked. Therefore download a rom of your choice then connect to the usb when on the bootloader then use a Diamond custom RUU (normally come with the rom) follow the steps. After rom updated make a hard reset. I hope it will run ok.
Looks your symtons are showing like your rom corrupted.
Good luck
i am flashing this ROM
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
the newest one i downloaded from htc. com is giving me rom update error
would you recommend a good rom for my phone?
after flashing and reflashing and hard resetting with the ROM showed above
still cant boot in ROM mode, only in boot mode
el condor sabes, anything ???
should i flash with a new rom, and if yes with which?
(diam100 olinex 1.40 unsigned)
Perhaps try a custom rom?
I found when flashing to an official rom from a different provider (my phones telstra and was flashing 3) I had issues with the rom booting and had to follow a post on here somewhere to get it working, however When I had this problem I could still flash any custom rom with no issues.
Unless its for warrenty purposes then its probably not worth flashing the "original" perhaps flash A.Z.T.O.R. = Alpha Zero Tweaked Official Roms which are close to the original but with benifits of being modded for faster speed etc.
Anyways Im no pro but I know what you are going through and I am trying to find the link to the fix to your problem as I also had the problem. But recommend trying a custom rom to confirm the problem is the same as mine.
For the record now I do not use official roms anymore, with WM6.5 running well for the most part on the diamond its a great step backwards when you revisited 6.1
flashed to SwiftBL-WWE-Diamond-v7.5-Full-16MbPP
still same problem can only go to boot mode
i am feeling there is no solution to my problem ?
is the phone bricked? :S
If you haven't done yet, flash the hard-spl I posted. Just do it, re-instal the hard-spl! Then, flash another ROM, maybe (as said before) your rom is corrupted.
The problem here is, that you first installed the unsigned hard-spl, and then flashed a corrupt rom. In that way, the hard-spl can be damaged too, so flash the hard-spl again and flash another rom should work.
Good luck!
I did :S but to no avail, I will do it again fingers crossed :S !
update: weird, everytime after i flash the hardspl unsigned, it boots up, i can see the "touch diamond" logo
windows mobile booted.. preparing your device..
update 2: windows mobile booted, installing everything
omgomg it looks it might work this time, fingers still crossed !!
el condor !! haha fingers crossed
update 3 :S : windows mobile installed properly, phone rebooted, went again and opened it, then i heard a sound from the speaker and the phone turned off :S
it must work what could the problem be now? last step !
Okay try a hard-reset, maybe that works.
If not, then flash hard-spl again, then hard-reset, then flash another ROM. Then hard reset. Then try again if it boots.
Is your battery enough charged? That could also be a reason.
did not work, wont even boot up
when i said if i leave battery out and such, I thought it might be hardware/heat related
http://www.htcwiki.com/thread/2069847/HTC+Diamond+-+Severe+Crashing+Problem,+maybe+heat+related
could this be it? will i have to send my phone for repairs?
because maybe when WinMo was loaded, the phone started to heat up and it shut down
so basically my solution is not a software fix??
If none of the tips worked, and you have the same problems as described in the site you linked, then you probably have to send it back.
One thing you could do: Try if the other hard-spls (1.37 and 1.93 unsigned) are working for you.
I'm sorry for you, maybe someone more skilled than me (like cmonex or olipro) knows how to solve your problem.
it's alright :S i thank you for all the help you have offered !
( it is customizing right now) but i expect it to reboot anytime now
worked, 5 minutes into winmo it restarts
mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
OK good to hear that, if you have any more questions in future, just ask!
Glad to be of some help
msvb007 said:
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
Click to expand...
Click to collapse
Ive sent you a pm, there's no need to use this thread for your questions because the problem in this thread is solved.
So take a look at your pm!
I installed a HardSPL 1.40 Olinex. Then Custom RUU 23125 from here. I installed a wm 6.5 (i gues so). I run the OS and i began to personalize my new OS. The system buged and crashed. After reboot (by taking out the battery) the OS wouldn't start. I tried hard reset, but nothing. I am sorry for the very bad english, but i need help urgently ! ! ! I have the phone from 4 days If i only knew what will happen.... Thank you!
atomheart said:
I installed a HardSPL 1.40 Olinex. Then Custom RUU 23125 from here. I installed a wm 6.5 (i gues so). I run the OS and i began to personalize my new OS. The system buged and crashed. After reboot (by taking out the battery) the OS wouldn't start. I tried hard reset, but nothing. I am sorry for the very bad english, but i need help urgently ! ! ! I have the phone from 4 days If i only knew what will happen.... Thank you!
Click to expand...
Click to collapse
I would suggest you by following solution
1.Boot from MTTY way
2.Try SPL 1.93
3.Change your battery--i experienced once when i flash a new ROM and my diamond stuck on "TOUCH DIAMOND-the first screen" and then keep reboot. Then i change my battery, it boot just like nomal.
Good Luck.
ku9911 said:
I would suggest you by following solution
1.Boot from MTTY way
2.Try SPL 1.93
3.Change your battery--i experienced once when i flash a new ROM and my diamond stuck on "TOUCH DIAMOND-the first screen" and then keep reboot. Then i change my battery, it boot just like nomal.
Good Luck.
Click to expand...
Click to collapse
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
no need to get back to 1.39 .. olinex 1.40 works fine. maybe just the rom is faulty when after reset+vol down+enter does the same error!
get onto boot loder (reset + vol down) when you get the "serial" label, plug in the usb, do the task 29 to format the phone, and get some other rom, and flash it with provided exe file.
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
Are you using Atlas rom? or what? This rom has a bug in this moment of installation that sounds like your behavior...
I have several problems with 6.5/6.5.x newer builds before I switch to hardSPL 1.93 developer edition. This hardSPL could be installed to the phone also in the situation when no active sync connection is available. Simply run "installer" and go through the process as usual, you will see that it works...
Mbiba
mbiba said:
Are you using Atlas rom? or what? This rom has a bug in this moment of installation that sounds like your behavior...
I have several problems with 6.5/6.5.x newer builds before I switch to hardSPL 1.93 developer edition. This hardSPL could be installed to the phone also in the situation when no active sync connection is available. Simply run "installer" and go through the process as usual, you will see that it works...
Mbiba
Click to expand...
Click to collapse
I am with Energy ROM 2.xxxx. I' ll try this right now.
260 error
it ' s give me error 206 (telephone not connected). How to instal whatever without a USB connection and ActiveSync? It doesn' t work> It' s stuck now on Starting Windows screen: Preparing for first use....."
Flash a stock rom with stock spl from bootloader (press soft reset then volume down ) then re try with hard spl and put another rom like energy rom that works for sure (at least for me)
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
seems u did not read much before flashing. I guess you can easily solve the problem following Post2. You are doing Hard reset (reset+down+middle). It would not solve the problem. For new flash or mitty you have to go to boot loader screen (reset+down vol. key) (not the middle key). Also Active sync menu: file->connection settings, deselect 'Allow USB connection'.... then start flashing new rom (more details see Mitty or flash thread):
http://forum.xda-developers.com/showthread.php?t=540290
http://forum.xda-developers.com/showthread.php?t=416211
in simple english,
MITTY: for formatting ROM so that no old data will mess up with new rom (not always required but solves many wiered problems)
I once faced such problem , Mitty (once) and flashing rom (twice) solved the problem
HELICOPTER88 said:
Flash a stock rom with stock spl from bootloader (press soft reset then volume down ) then re try with hard spl and put another rom like energy rom that works for sure (at least for me)
Click to expand...
Click to collapse
Thank you man. It works now. I installed this rom: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.
Can you, or anybody give me some advice about which Rom should I install, to install wm 6.5 for my phone. Is there some "light" ROM, or something, for wm6.5 (working).?
atomheart said:
Thank you man. It works now. I installed this rom: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.
Can you, or anybody give me some advice about which Rom should I install, to install wm 6.5 for my phone. Is there some "light" ROM, or something, for wm6.5 (working).?
Click to expand...
Click to collapse
I think currently the best is ralphusion J with only few bugs and issues.
Mbiba
well last night my phone was working fine i have a t-mobile TP2 , phone died , i put it on charger till it was fully charged and turned it on and it doesnt go past boot screen.
i tried fixing it several ways
1. went into bootloader mode and tried to reflash a newer energy rom, finished that and reset the phone and still samething.
2.went into bootloader again and tried to reflash a stock tmobile rom and once again didnt work.
3.flashed a different radio and still stuck
4.tried 1&2 via micro sd and still samething
any ideas ? on what should i do or is my phone done ?
thanks.
Flash the stock ROM. If it still doesn't work, then try doing a Task29 (search for that in the TP2 ROM Development forum), a radio re-flash, and a ROM re-flash. If that doesn't work, then it's a brick.
sumflipnol said:
Flash the stock ROM. If it still doesn't work, then try doing a Task29 (search for that in the TP2 ROM Development forum), a radio re-flash, and a ROM re-flash. If that doesn't work, then it's a brick.
Click to expand...
Click to collapse
Good advice here, but if this doesn't work and you need to send it back, make sure to put the stock SPL back on it. Grab that from the Hard SPL thread.
I read something about plugging in your headset and then it will boot (go past the bootloader) If that is the case, your usb port is broken.
sumflipnol said:
Flash the stock ROM. If it still doesn't work, then try doing a Task29 (search for that in the TP2 ROM Development forum), a radio re-flash, and a ROM re-flash. If that doesn't work, then it's a brick.
Click to expand...
Click to collapse
thanks for the advice but didn't work for me , i cant do anything because the Rom loader stays on 0% and when i try to do it via micro sd it stays on loading the rhodimg , doesn't go past loading
cajunflavoredbob said:
Good advice here, but if this doesn't work and you need to send it back, make sure to put the stock SPL back on it. Grab that from the Hard SPL thread.
Click to expand...
Click to collapse
Good idea , i have stock spl on it now, but the radio isnt stock i tried flashing stock radio but no progress, stays at 0% now
sumflipnol said:
Flash the stock ROM. If it still doesn't work, then try doing a Task29 (search for that in the TP2 ROM Development forum), a radio re-flash, and a ROM re-flash. If that doesn't work, then it's a brick.
Click to expand...
Click to collapse
and to do a task29 doesnt the phone need to be connected to computer via active sync? well since my phone wont go past boot screen cant do that , idk what else to do..
enanito89 said:
and to do a task29 doesnt the phone need to be connected to computer via active sync? well since my phone wont go past boot screen cant do that , idk what else to do..
Click to expand...
Click to collapse
You don't need a USB connection to flash anything. You could load the .nbh file onto the root of the SD card. Once in bootloader mode, it will flash straight from the SD card. This works for task29 as well. If you aren't having any luck so far, this might not help, but it is an alternative to USB flashing.
cajunflavoredbob said:
You don't need a USB connection to flash anything. You could load the .nbh file onto the root of the SD card. Once in bootloader mode, it will flash straight from the SD card. This works for task29 as well. If you aren't having any luck so far, this might not help, but it is an alternative to USB flashing.
Click to expand...
Click to collapse
tried the img doesnt load , it stays on loading screen.
enanito89 said:
tried the img doesnt load , it stays on loading screen.
Click to expand...
Click to collapse
If you aren't having any luck, then neither will T-Mobile. If you've got the stock SPL on it, then just do a warranty exchange.
cajunflavoredbob said:
If you aren't having any luck, then neither will T-Mobile. If you've got the stock SPL on it, then just do a warranty exchange.
Click to expand...
Click to collapse
thats my only option left , thanks for the help guys.
my htc 8525 stuck on the align screen after I flash it, can someone please help me. Thank you
soji1226 said:
my htc 8525 stuck on the align screen after I flash it, can someone please help me. Thank you
Click to expand...
Click to collapse
do a hard reset on the device after it reFlash with official rom for your device
first ensure that you flashed HSPL on your device or else sometime your wrong ROM takes you till the dustbin to throw your device.
after flashing HSPL choose one of the the ROM in this hermes section only for your hermes device. & then flash it & do hard reset ENJOY the new ROM.