Related
Help me please!
i want install new rom on my diamond but when i install the HARD-SPL signed or unsigned on my diamond the screen is black and the connection with Activesync fall.. and the progress bar remainig on 0%
i try to start manual spl.exe from my diamond but i have the same problem...
please help me i had also hard reset the device but nothing yet
please please help me!!! i read on the forum but i don't see any solution for my problem
Thank you
fpgiuliano said:
Help me please!
i want install new rom on my diamond but when i install the HARD-SPL signed or unsigned on my diamond the screen is black and the connection with Activesync fall.. and the progress bar remainig on 0%
i try to start manual spl.exe from my diamond but i have the same problem...
please help me i had also hard reset the device but nothing yet
please please help me!!! i read on the forum but i don't see any solution for my problem
Thank you
Click to expand...
Click to collapse
Place manualspl.exe on to the root of the diamond.Run it(your screen will go back! After this, you should run the hardspl.
After it is finished, you should be able to install any rom...
oddball1 said:
Place manualspl.exe on to the root of the diamond.Run it(your screen will go back! After this, you should run the hardspl.
After it is finished, you should be able to install any rom...
Click to expand...
Click to collapse
oddball thanks for reply but i try to do this
but after the starting of splmanual the screen go black and the connection with activesync fall
whyyyyy!!!!?????
please help me
just leave it for a while.. it fails because your device is now in a bootloader mode.. let the RUU finish its job
racerx_ said:
just leave it for a while.. it fails because your device is now in a bootloader mode.. let the RUU finish its job
Click to expand...
Click to collapse
ops...
thank you!!!
Help, flashed to revrom v7 now to start it was fine then the touch screen froze. Reset but now it hangs at the HTC Hermes splash screen. Nothing i do seems to sort it. As a newbie i did a real **** up i did not install the hard spl. Can this be resolved only just got the thing. Any help please.
Did you try a hard reset? hold the left and right softkeys (above the windows and ok keys on the front) while pressing the reset. maybe you'll get lucky?
You also might be able to put the phone into bootloader and flash a stock shipped rom.
Thanks, Hard Reset did the job.
Now make sure you install hardspl!
boog321 said:
Now make sure you install hardspl!
Click to expand...
Click to collapse
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
inergen said:
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
Click to expand...
Click to collapse
OK first of All tell us what do U have, which Rom R U using.
Second of all tell us what happens after HR.
Don't be shy, open up!
inergen said:
hi, i am having the same problem, wm6.1 hangs. hard reset can't do the job. any other advices?
tks.
iL
Click to expand...
Click to collapse
Yup, just like D_NazGUL said, we need a bit more info. But maybe this will get you started.
Hopefully you have hardspl v7 (spl 2.10 Olipro) on your phone, that way you could just flash from sd card. if so, flash the at&t stripped rom, then back to the custom rom.
If you don't have hardspl, then you need to try to flash your original stock shipped rom, then hard spl, then back to the rom of your choice.
Then, before flashing a custom rom, flash the at&t stripped rom. Always flash the stripped rom between custom roms.
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
You can do thAT, on this way
Plug the USB cable to connect your Diamond with PC, make sure ActiveSync connected.
Copy "SSPL-Manual.exe" to Internal Storage on your Diamond.
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable. Your Diamond screen will turn "BLACK" and ActiveSync will disconnect. *This is normal behavior***
Execute the ROMUpdateUtility.exe.
Your Diamond will automatically restart when finished.
To make sure stock SPL has been flashed back, press and hold "Vol-" key and use stylus to press reset once. until you see the tricolor screen and if you can see version of spl which before you flashed, it's ok!
Greetz
sucro said:
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable.
Click to expand...
Click to collapse
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
when i want to install the original htc rom after received the upgrade present to 100 this error message appear .for this aim i need to downgrade my spl to stock. . is there any manual or howto link and also original spl files please link it. i have been searching for a while.
my stock spl was 1.93.
any help would be appreciated.
masa1977 said:
is there any manual or howto link and also original spl files please link it.
Click to expand...
Click to collapse
It's in the HardSPL Developer Edition Thread.
thanks a lot slow23
slow23 said:
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
Click to expand...
Click to collapse
You are welcome, try this, i discover this combination of buttons
ENTER+VOL UP = ALIGN SCREEN
that means, with this combinations of buttons, you can directly enter ALIGN SCREEN options, and try to align screen , sometimes this helped me, cause my touch screen has same problem, it start to freeze randomly, i don't know why, sometimes in right, sometimes in left corner, up-down, randomly, i noticed that htc diamond when is exposed , when i'm out and it's sunny weather, it stop to responding on touch, one my friend specialist for mobiles, tell me, maybe this happen, cause bellow screen in some pda is some thin rubber, and from heat it start to expand, and that cause problems, maybe this situation is in htc diamond...
greetz and good luck
Returning to Stock SPL
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
Hi
I have similar problem and I will tell you what I did to get back to Stock SPL.
1. Flash the BSBs latest ROM from this thread, http://forum.xda-developers.com/showthread.php?t=506533 . Either by RUU or moving the diaming.nbh to the storage, this ROM does not require allignment or any other input.
2. Install My Mobiler from http://mymobiler.com in your computer, where you can see your mobile screen in your computer and operate using your mouse.
3. Then return to the stock SPL as given in this thread http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39.
4. Flash your ROM again from the HTC. This can be done once the system connects to the phone.
I am successful in doing the above.
Regards,
V.Balaji
i have flashed my diamond with the official htc rom
im on 1.40 olinex, now i can only access boot mode.
sometimes if i leave the phone without a battery for like 2 hours, when i turn it on i see the "touch diamond" logo, if i leave the battery for a whole day i see the windows mobile loading screen, but then suddenly the phone turns off
plz if you have any idea about this problem help me
If you can acces bootloader, then your diamond isn't bricked.
Try the unsigned version of olinex' hard-SPL and flash the ROM again.
Good luck!
hey ElCondor, im on 1.40 olinex, i cant flash it because it is protected
how can i flash the unsigned 1.40 olinex one?
Here is a link to the unsigned hard-spl.
Make sure you download "Unsigned-Hard-SPL-Diamond-OliNex.zip".
Follow the instructions:
1) Download, extract to an empty folder.
2) Run RomUpdateUtility.exe, Have Phone Synced with PC (go into bootloader, connect your cable, then the word "serial" in bootloader will change into "USB".
3) follow steps, check device for prompts after PC shows loading bar. it should go to black screen now.
4) SPL flashes, device automatically reboots, job done.
5) to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Installing this will hard-reset your device.
Best Regards,
ElCondor
when i flashed the unsigned 1.40 olinex, the device rebooted
windows mobile is preparing your phone for first use
htc logo
phone went off :S
will try flashing rom again
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
mzaouar said:
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
Click to expand...
Click to collapse
Hi
If you can access the bootloader then your device is not bricked. Therefore download a rom of your choice then connect to the usb when on the bootloader then use a Diamond custom RUU (normally come with the rom) follow the steps. After rom updated make a hard reset. I hope it will run ok.
Looks your symtons are showing like your rom corrupted.
Good luck
i am flashing this ROM
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
the newest one i downloaded from htc. com is giving me rom update error
would you recommend a good rom for my phone?
after flashing and reflashing and hard resetting with the ROM showed above
still cant boot in ROM mode, only in boot mode
el condor sabes, anything ???
should i flash with a new rom, and if yes with which?
(diam100 olinex 1.40 unsigned)
Perhaps try a custom rom?
I found when flashing to an official rom from a different provider (my phones telstra and was flashing 3) I had issues with the rom booting and had to follow a post on here somewhere to get it working, however When I had this problem I could still flash any custom rom with no issues.
Unless its for warrenty purposes then its probably not worth flashing the "original" perhaps flash A.Z.T.O.R. = Alpha Zero Tweaked Official Roms which are close to the original but with benifits of being modded for faster speed etc.
Anyways Im no pro but I know what you are going through and I am trying to find the link to the fix to your problem as I also had the problem. But recommend trying a custom rom to confirm the problem is the same as mine.
For the record now I do not use official roms anymore, with WM6.5 running well for the most part on the diamond its a great step backwards when you revisited 6.1
flashed to SwiftBL-WWE-Diamond-v7.5-Full-16MbPP
still same problem can only go to boot mode
i am feeling there is no solution to my problem ?
is the phone bricked? :S
If you haven't done yet, flash the hard-spl I posted. Just do it, re-instal the hard-spl! Then, flash another ROM, maybe (as said before) your rom is corrupted.
The problem here is, that you first installed the unsigned hard-spl, and then flashed a corrupt rom. In that way, the hard-spl can be damaged too, so flash the hard-spl again and flash another rom should work.
Good luck!
I did :S but to no avail, I will do it again fingers crossed :S !
update: weird, everytime after i flash the hardspl unsigned, it boots up, i can see the "touch diamond" logo
windows mobile booted.. preparing your device..
update 2: windows mobile booted, installing everything
omgomg it looks it might work this time, fingers still crossed !!
el condor !! haha fingers crossed
update 3 :S : windows mobile installed properly, phone rebooted, went again and opened it, then i heard a sound from the speaker and the phone turned off :S
it must work what could the problem be now? last step !
Okay try a hard-reset, maybe that works.
If not, then flash hard-spl again, then hard-reset, then flash another ROM. Then hard reset. Then try again if it boots.
Is your battery enough charged? That could also be a reason.
did not work, wont even boot up
when i said if i leave battery out and such, I thought it might be hardware/heat related
http://www.htcwiki.com/thread/2069847/HTC+Diamond+-+Severe+Crashing+Problem,+maybe+heat+related
could this be it? will i have to send my phone for repairs?
because maybe when WinMo was loaded, the phone started to heat up and it shut down
so basically my solution is not a software fix??
If none of the tips worked, and you have the same problems as described in the site you linked, then you probably have to send it back.
One thing you could do: Try if the other hard-spls (1.37 and 1.93 unsigned) are working for you.
I'm sorry for you, maybe someone more skilled than me (like cmonex or olipro) knows how to solve your problem.
it's alright :S i thank you for all the help you have offered !
( it is customizing right now) but i expect it to reboot anytime now
worked, 5 minutes into winmo it restarts
mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
OK good to hear that, if you have any more questions in future, just ask!
Glad to be of some help
msvb007 said:
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
Click to expand...
Click to collapse
Ive sent you a pm, there's no need to use this thread for your questions because the problem in this thread is solved.
So take a look at your pm!
Hi everyone well I'm new to the flashing and dont want to jump any steps as this could possible brick my phone...
I've been having some problems with flashing as i cant find a step by step to flashing my HTC TP2. I've managed to do the RhodiumW Hard-SPL package but after trying to flash to some custom RUU's the installation seems to go fine its not until the phone first boots up, that's when the phone just hangs on the HTC splash screen
From there i cant do anything other then boot up to the tricolor bootloader screen and re-install the original 2.04.651.4 update!
can someone tell me what im missing to be able to flash my HTC correctly, or at least point me in the right direction?
Thank you in advance!!!
step 1
http://member.america.htc.com/download/RomCode/HTC Touch Pro2 (Sprint)/HTC Touch PRO2 MR1.exe
step 2
http://rhodiumw.htc-unlocks.com/hard-spl.php
step 3
http://www.mightyrom.com/mightyrom/touch-pro-2/
Hey Tommy many thanks for the post. I just upgraded my phone and peeling through the information overload, however you direct link does not work for step 1. I want to make sure that I am running the correct piece of software that you recommending. Could you please list the title for that file?
Nevermind I was able to find it via a mirror site.
Back into lurker status for now
Thanks
alright so i was able to install they mightyrom on my phone that went well my phone didnt freeze and everything started the way it should have.
but does that mean i can now flash my phone to other for example "leo cell" or Bxsteez Rhodium" if not how do i get to that point cuz when ever i flas them to they just freese on the white splash screen with the HTC logo in green letters!!
Thanks!
If you have installed Hard SPL then use the sd card method.
1. Format the sd card FAT32 ( they come FAT default) and copy the rom's .nbh file onto it. Rename to Rhodimg.nbh .
2. Insert sd card back into powered off Rhodium. Go into bootloader by pushing down volume and power.
3. If you did it properly and Hard SPL is on your phone then it should say to press power to update os...
If you aren't sure if you have Hard SPL then go to bootloader without the sd card in there, it should say SPL - 0.85.Olinex if you have Hard SPL, anything else won't register the flash file.
Cheers...
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
"the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license."
Click to expand...
Click to collapse
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
signalsoldier said:
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
Click to expand...
Click to collapse
I think you should ask this in the hard spl thread in the cmda section...That is the place for those questions Assuming that you have a cdma phone because you did not mention it. Otherwise check the hard spl thread in the gsm section.
Heading that way thanks for the directions mate!
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
htcru7 said:
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
Click to expand...
Click to collapse
Just flash away
LOL alright thanks i guess im just paranoid but thanks i'll "flash away"
Lock
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Scream-krg said:
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Click to expand...
Click to collapse
the Hard-SPL will only work if you booted windows mobile. you have to sync the phone in windows mobile to the PC.
is there other way to get through in hard spl because i dont have any account for example, paypal...... http://media.xda-developers.com/images/icons/icon9.gif
chrisjavier666 said:
is there other way to get through in hard spl because i dont have any account for example, paypal......
Click to expand...
Click to collapse
Hard SPL is free for non-commercial users.
my tp2 is bricked
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
nastyrock said:
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
Click to expand...
Click to collapse
Did you try flashing the stock ROM? It's always a good idea to try that if you think there's no hope. It flashes everything.
Also, did you try task29?