Develop Bugs

help ... xda exec won't start after rom flashing

somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...

Which ROM did u reflashed ?

Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!

Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!

Have u tried reflashing it again via bootloader mode ?

niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)

Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)

niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!

U shld better get it replaced .

niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.

niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!

Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.

still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..

trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?

Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks

blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..

alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....

I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.

alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working

This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

I think i bricked my diamond?

Hi i flashed this ChronicROM and when it finished it won't boot annymore,
i only see the schreen displaying toutch diamond.
Annyone have an idea how i can flash an other rom?
Or is it really bricked?
i can't afford an new one richt now so if there is an fix

It's not bricked.
Put it back into bootloader, flash the original factory ROM and presto you are good to go again.
Regards,
EqX

then you can have a look at
http://forum.xda-developers.com/showthread.php?t=416211

the-equinoxe said:
It's not bricked.
Put it back into bootloader, flash the original factory ROM and presto you are good to go again.
Regards,
EqX
Click to expand...
Click to collapse
how do i put it into the bootloader becouse it dous nothing wjtch keystroke/hold do i need to make plz help

Your radio is outdated. Latest stock will fix you up. Bootloader is soft reset volume up and power button.

soft reset
Windows mobile dousnt start i had an custom rom with an updated radio rom and an custom hardspl and everything but i tried this rom and it won't boot.
absolutely nothing loads i have the feeling.
or i'm doing it wrong but i think the soft reset isn't working in my case

nemesis88 said:
Windows mobile dousnt start i had an custom rom with an updated radio rom and an custom hardspl and everything but i tried this rom and it won't boot.
absolutely nothing loads i have the feeling.
or i'm doing it wrong but i think the soft reset isn't working in my case
Click to expand...
Click to collapse
see if this works soft reset then hold the volume down button

Flash a Factory/Original/Shipped ROM! That should solve most probably!

Carty said:
Flash a Factory/Original/Shipped ROM! That should solve most probably!
Click to expand...
Click to collapse
Im going to thy it but i still havent got it in anny service mode what so ever

i'm noob
Just got it into service mode now i can flash thanx for the effort

wtf man.. next time use more of your brain and read at what other users write to you what to do. From the beginning they've told u to put it on bootloader and u wouldnt listen.. if i were them i would be offended by your behaviour

eedvard said:
wtf man.. next time use more of your brain and read at what other users write to you what to do. From the beginning they've told u to put it on bootloader and u wouldnt listen.. if i were them i would be offended by your behaviour
Click to expand...
Click to collapse
This was my first bad flash after i got the phone so can't help it that i thought that i bricked it, and not everyone is as good as an developer as u apperantley if it isn't worth youre time just don't reply if u're just *****ing

Diamond Bricked.?

Okay I need help.
I flashed a SU radio( I know stupid, cause it wasn't SU)
Well after flashing it my phone doesn't start, doesn't charge, can't enter bootloader, can't hard reset.
Is it bricked(cause I really don't know how to find out if it is.)
And if its not can someone please tell me how to get it fixed.!

hriday21 said:
Okay I need help.
I flashed a SU radio( I know stupid, cause it wasn't SU)
Well after flashing it my phone doesn't start, doesn't charge, can't enter bootloader, can't hard reset.
Is it bricked(cause I really don't know how to find out if it is.)
And if its not can someone please tell me how to get it fixed.!
Click to expand...
Click to collapse
if you cant enter bootloader then yeah its bricked, ring htc and ask about a repair

Update
mancsoulja said:
if you cant enter bootloader then yeah its bricked, ring htc and ask about a repair
Click to expand...
Click to collapse
Well I just woke up and I tried switching my phone and what would you know it worked but it kept switching itself off as soon as Touch Diamond was shown. So I entered bootloader and I flashed the EnergyRom and the phone restarted itself and on the starts screen my Radio was mentioned as "1.20 Olinex" and my prtocol was 52.55a something. And also there was a "G" in the bottom left corner after which it went to customization where it switched itself off again and now I can't switch it on again what do I do. :S

hriday21 said:
Well I just woke up and I tried switching my phone and what would you know it worked but it kept switching itself off as soon as Touch Diamond was shown. So I entered bootloader and I flashed the EnergyRom and the phone restarted itself and on the starts screen my Radio was mentioned as "1.20 Olinex" and my prtocol was 52.55a something. And also there was a "G" in the bottom left corner after which it went to customization where it switched itself off again and now I can't switch it on again what do I do. :S
Click to expand...
Click to collapse
If you can, next time when it starts to work again, Try flashing the Radio to a proper one, then flash your hardspl again, then install a new rom.

Hey thanks a lot everyone I had to flash a stock ROM and everything started working perfectly again but I still wonder what had gone wrong. hmm. thanks a lot anyways guys.

HTC Desire HD won't boot.. help!

Ok guys, I definitively need your help now.
This morning I woke up, i toke my phone (already on) and I saw that keyboard didn't work anymore, so I rebooted it and appeared the white screen with HTC LOGO, then three or four vibrations and BUM... FREEZED.
The phone is rooted, with custom rom. S-OFF.
The problem is that i can't enter into RECOVERY of the phone anymore, but I can still enter into BOOTLOADER. I tried to do a FACTORY RESET, but doesn't work (the display show again the htc logo with some vibrations before the freeze).
There is some way to format/repair with the help of PC ? Like when i changed my RADIO some weeks ago... or.. I don't know.
Thanks.

DjMatrix619 said:
Ok guys, I definitively need your help now.
This morning I woke up, i toke my phone (already on) and I saw that keyboard didn't work anymore, so I rebooted it and appeared the white screen with HTC LOGO, then three or four vibrations and BUM... FREEZED.
The phone is rooted, with custom rom. S-OFF.
The problem is that i can't enter into RECOVERY of the phone anymore, but I can still enter into BOOTLOADER. I tried to do a FACTORY RESET, but doesn't work (the display show again the htc logo with some vibrations before the freeze).
There is some way to format/repair with the help of PC ? Like when i changed my RADIO some weeks ago... or.. I don't know.
Thanks.
Click to expand...
Click to collapse
That sounds like a fried motherboard. Try flashing a RUU from fastboot usb. If after the flashing the phone keeps not booting, then your motherboard needs to be replaced.
If you need help with the flashing read the guide in my signature to find out how to perform that stuff. :victory:

glevitan said:
That sounds like a fried motherboard. Try flashing a RUU from fastboot usb. If after the flashing the phone keeps not booting, then your motherboard needs to be replaced.
If you need help with the flashing read the guide in my signature to find out how to perform that stuff. :victory:
Click to expand...
Click to collapse
Sorry what guide i need to follow, and where I can find this "RUU" for my phone? Thanks ^^

DjMatrix619 said:
Sorry what guide i need to follow, and where I can find this "RUU" for my phone? Thanks ^^
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=30020025&postcount=7

glevitan said:
http://forum.xda-developers.com/showpost.php?p=30020025&postcount=7
Click to expand...
Click to collapse
Ok, installed RUU in my phone, but it's still vibrating 7 times. No other chances I suppose... right?

DjMatrix619 said:
Ok, installed RUU in my phone, but it's still vibrating 7 times. No other chances I suppose... right?
Click to expand...
Click to collapse
Check or volume rocker/keys. On the mytouch 4g, when u press volume up and power key while phone is off, it vibrates and the notification light blinks red. So maybe or volume up key is stuck.
Sent from my Desire HD using xda app-developers app