Hello, I was re-flashing my SPV M3100 (with hardspl v7 oplio 2.10) from Schaps WM6Pro_Hermes 4.30 WWE Full Rom to the 20070311 Hermes WM6 LVSW rom, at about 22% of rom being updated, the USB cable was accidently unplugged from my device
I plug it back up and try to restart the process but it gives me a "ERROR [260] UPDATE ERROR" message and my PDA screen stays at windows mobile and my Activesync 4.5 can't connect to my PDA
When I try Soft Reseting or Master Reset, it will try to load and I see red letters on the HTC boot
M 05
S 04 NO GSM (appears for about 8 sec.)
B 06 D 3.62
After the red words clear and it stays frozen on the windows mobile screen. Can someone please help me..
put the phone into boot loader and try flashing the rom again.
Hi Joshkoss,
I have tried many times re-flash the rom and sim unlock under bootloader, however all doesn't work at all.
IPL: 1.01, SPL: 1.09.
Could you please kindly advise?
Thanks in advance..
try the stock shipped rom from bootloader, maybe it will "see" it.
It looks like you do not have hardspl v7 installed. With hardspl your spl line should say 2.10 olipro
You need to flash the original orange rom to your spv m3100, what country you are in is important, if in the uk use the rom update from orange on there website, if any other country then use that update.
hey guys, thanks alot for your advice.
cheers..
Related
Hi, I have upgraded my Qtek 9000 Rom WWE with a PTB version.
Now, my phone only show the "USB v1.0" screen...
Is the 4th time that i'm trying to do this again, and it still doen't boot up to the Windows Mobile, only the "USB v1.0" screen.
I have tried hard resets and it still on "Serial v1.0" screen...
Please someone help me!
http://forum.xda-developers.com/viewtopic.php?t=43592
Worked using a diferent radio Rom. Thanks.
can anyone help me? Im new with PDA. What happen was i tried to upgrade my PDA, and i manage to install the satin black. after trying another os my pda doesn't want to reboot when the installation was succesful. tried hard reboot and it goes to the red green yellow and white screen. now everytime i get the spl 1.40 to install it works till 100% but after that it won't reboot. what can i do? thx. please help
you should hard spl your x01ht first before upgrading your pda.
did you do hard spl first?
what is your radio rom, SPL??
Hello Experts..
HELP ME PLZ
i have
I-Mate JASJAM HERM100
IPL-1.00
SPL-1.04
i was flaishing (installing) the rom from my laptop to the i-mate
it starts ok,
then when it reached 6%, connection error happened
then followed the steps, (to remove the battery, and turn on the device again)
but it didn't repair it
now when i turn on my device, it starts in the bootloader screen (the red/green/blue lines)
and in the red line is written
HERM100
IPL-1.00
HERM100
SPL-1.04
and i can't connect it to my computer to install or flash a new rom...
I tried to flash the rom from the SD Card, after it finnished , (updated successfully) or something like that, i restarted the device , it returns into the bootloader screen
what can i do, and which programs or roms shall i use...
thanx a lot for the one who can help me....
Don't panic check this link and read carefully through it.. http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing and try this link as well http://forum.xda-developers.com/showthread.php?t=296722 i wish u good luck.. and don't forget before before starting to flash to pass by this link too http://forum.xda-developers.com/showthread.php?t=295751
What ROM were you flashing? Do you have HardSPL installed? Have you read wiki on how to flash ROM?
HERM100
IPL-1.00
HERM100
SPL-1.04
It seems you forgot to hardspl the phone before you flash it....
hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
bennylu said:
hello each rom that i download and have the file Custom_RUU.exe
not working on my imate jasjam
whats happening is : the rom start the installing process and when the imate needs to load the boot loader screen (blue red green) just before the process of the rom copying should start the phone goes to sleep mode..
mainly i just want to install energy rom 3.0 on my imate ..
is that problem can be solved ?
Click to expand...
Click to collapse
hi dude!
For first time flashing and newbie:
Please flash HardSPL and OEM Stripped AT&T first before you can flash Custom ROMs.
HardSPL link: http://forum.xda-developers.com/attachment.php?attachmentid=37669&d=1177280888
OEM Stripped AT&T: http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Flashing method :
Withactivesync http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
For How to flashing with MicroSD,http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And Hard reset after flashing rom
good lucky !
hi!
thanks for the fast replay
ive done exactly as you said but the problem stays ..
if i flashing roms that comes with the file RUUWrapper.exe
i have no problem
is there any convertor that can convert between those types?
Mate, use the sd card method... No problems with syncing ever again...
please help as diamond is not responding(after installing spl)
--------------------------------------------------------------------------------
i installed some diamond spl on diamond although it completed 100 percent and turned off, and model id error flashed on screen, now it is not responding (not turning on) is there any solution to install any spl either stock or hard any so the device can turn on , plz help........any way to spl at this stage?