can anyone help me? Im new with PDA. What happen was i tried to upgrade my PDA, and i manage to install the satin black. after trying another os my pda doesn't want to reboot when the installation was succesful. tried hard reboot and it goes to the red green yellow and white screen. now everytime i get the spl 1.40 to install it works till 100% but after that it won't reboot. what can i do? thx. please help
you should hard spl your x01ht first before upgrading your pda.
did you do hard spl first?
what is your radio rom, SPL??
Related
Hi, I have upgraded my Qtek 9000 Rom WWE with a PTB version.
Now, my phone only show the "USB v1.0" screen...
Is the 4th time that i'm trying to do this again, and it still doen't boot up to the Windows Mobile, only the "USB v1.0" screen.
I have tried hard resets and it still on "Serial v1.0" screen...
Please someone help me!
http://forum.xda-developers.com/viewtopic.php?t=43592
Worked using a diferent radio Rom. Thanks.
Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.
Have you tried flashing from the bootloader to an official rom?
thanks for reverting, i have tried that too, but of no use.
Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .
i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.
Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.
Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!
Hello, I was re-flashing my SPV M3100 (with hardspl v7 oplio 2.10) from Schaps WM6Pro_Hermes 4.30 WWE Full Rom to the 20070311 Hermes WM6 LVSW rom, at about 22% of rom being updated, the USB cable was accidently unplugged from my device
I plug it back up and try to restart the process but it gives me a "ERROR [260] UPDATE ERROR" message and my PDA screen stays at windows mobile and my Activesync 4.5 can't connect to my PDA
When I try Soft Reseting or Master Reset, it will try to load and I see red letters on the HTC boot
M 05
S 04 NO GSM (appears for about 8 sec.)
B 06 D 3.62
After the red words clear and it stays frozen on the windows mobile screen. Can someone please help me..
put the phone into boot loader and try flashing the rom again.
Hi Joshkoss,
I have tried many times re-flash the rom and sim unlock under bootloader, however all doesn't work at all.
IPL: 1.01, SPL: 1.09.
Could you please kindly advise?
Thanks in advance..
try the stock shipped rom from bootloader, maybe it will "see" it.
It looks like you do not have hardspl v7 installed. With hardspl your spl line should say 2.10 olipro
You need to flash the original orange rom to your spv m3100, what country you are in is important, if in the uk use the rom update from orange on there website, if any other country then use that update.
hey guys, thanks alot for your advice.
cheers..
hello
I don't know why but my diamond hard-resets itself with many of wm6.5 rom's.
This happens when the phone stops responding and i'm forced to do a soft-reset with the stylus. After rebooting the phone gets stuck in the splash screen or just begins installing the rom from the begining.
I upgraded the hardspl from 1.40Olinex to 1.93 but no changes.
Im afraid to shut it down or to soft-reset because i'll lose my new contacts and messages and any other stuff.
Any help will be very appreciated.
Thank you in advance
Rom: wm6.5 BSB P
dude you already lost your contacts,messages
do MTTY
Hi there... i too had this problem.
i tried a few roms and even a few of my own but the same problem with EVERY rom.. i finally fixed it but installing an official orange 1.93 stock rom.. left that on for a a week or so and no hard resets!!! soo... i flashed a 6.5 rom back on (USING MTTY this time) and its all working fine still (2 weeks now) somthing was screwed :/
hope this helps you!
thank you very much
Hello,
With the mtty method, i wanted to install a new rom. I did this a lot of times before so i know how to do it. I copied the rom to the memory and used mtty to instal it. But it keeps get stuck at "loading..." Because the mtty i dont have a rom to start up at the normal way.
When i am at the bios of the tel and connecting by usb to my computer, i also tried to install a rom from the computer, but there it keeps stuck at 0%. When i re-install hard SPL, that goes fine (but my tel. doenst want to boot).
Also i tried a other rom, but that doenst whant to install too.
Can someone help me?
Hi
same problem.
use olinex again.
AMIRHADI DAISY said:
Hi
same problem.
use olinex again.
Click to expand...
Click to collapse
Hello,
I installed olinex hard SPL again, but my tel doenst want to boot. It only shows the "HTC diamond" starting screen.
Fixed! I tried a other hard SPL