Hey guys, im new to this forum and im having some issues, i recentley flashed my Alltel HTC TOUCH to Cricket, got the full flash but still not abel to get on the web, i do have the right plan and i already took it back to were it got flashed, and the guys there still cant get it to work. can anyone help me with this. And if your from the 915 El Paso Tx, that would be great, Thanks
Yo i'm from 915...i can help you since i haved flashed my own phone 8)
First off can you give details about the phone.
What ROM did they install? Look in the Device information under settings/system
When you dial ##778# or ##778 and you click view....In MIP settings what does it show?
Alletl 6900 HTC TOUCH purchased new 01-05-08,
DEVICE INFORMATION
ROM Version: 3.37.NO2.200
ROM Date: 04/09/08
Radio Version: 3.37.10
Protocol Version: DCAAXAM-4350H
Hardware Version: 0001
PRL: 01014
PRI Version: 2.01_011
Browser Version: MSIE 6.0
M.I.P Setting
# of Profiles: 1
Active User Profile Inde: 1
MIP_ MODE: Simple IP Only
MIP Reg. Retire: 1
MIP Reg. Retry: 2000 ms
MIP Pre-Reg. Ti: 30
Mobile Node_ha Auther: Disable
Send a Reg. Re: Enable
Dormant Handoff Optin: Disable
Are you able to *228 and have it program successfully?
The settings look correct. What does the internet exactly say when you try to connect to the net?
wrong password or login
hey bro. should i change the plan that does not have internet and change it back, and also can you do esn swaps on My Cricket account online.
Is your phone also an Alltel HTC TOUCH
Hmmm
1. check your settings/connections/connections
and make sure everything in there is set-up for cricket. Also once in connections make sure in the advanced tab....both drop down menu's say cricket.
Start\Settings\Connections\Connections Under the General Tab Enter Cricket. Under the Modem Tab put in Cricket Mobile Web select modem to cellular line. Click next put in #777 to dial to Cricket, click next… User Name: [email protected] Password: cricket Domain: Leave Blank, click finish…under proxy settings, check these 2 boxes (this network connects to the internet, and this network uses a proxy server to connect to the internet) Proxy Server: wap.mycricket.com click advanced. The only thing with a value should be HTTP wap.mycricket.com:8080 the rest blank. Click ok and ok again, this ok should bring you back to the connections screen at the bottom click advanced. Click select networks. Under both drop downs select Cricket. Click Ok Go into Exceptions Click add new URL for each of the following settings you are going to need to click add new url again, these don’t all go under one “Add new URL” Block
*mms.mycricket.com/servlets/mms
*.mms.mycricket.com/servlets/mms
*mycricket.com/
*.mycricket.com/
*.mms.mycricket.com/
*mms.mycricket.com/
2. I have a sprint touch and it doesn't really matter alongs its a touch.
3. No i cannot do esn swaps for you but my advice would be to check the connections settings first and if that is correct call customer service and have them reset your account.
what do you mean by resetting my account
Its just as if they are refeshing/resetting your account which ever term you want to use.
I edit my previous post....follow those directions to make sure your connection settings are correct.
Related
Hi All,
Am sure there are many threads - did a search but came up with nothing like mine. O2 Branded XDA Orbit with Vodafone SIM.
Upgraded from Default ROM to WM6 Bepe version - everything seems fine except my GPRS Connection.
CE OS 5.2.1238 (Build 17745.0.2.3)
Rom 3.4.207.1 WWE
4/18/07
Radio 2.49.90
Protocol 4.1.13.25
Model ARTE200
I have tried connecting to GPRS using my VODA SIM - which I know for a fact IS enabled for it as I was using it on my XDA-IIs - Now I just cannot connect to the GPRS to access my gmail or anything whatsoever.
I entered all the details for Voda-GPRS manually and also from CAB from this site and still cannot connect - it starts to connect and says the "connection was disconected" check settings...!!!
I am at my wits end on what the problem is !
Any ideas?
Dev
A couple of months ago I had an HTC Beta of WW6 and had to wipe it as it would not connect, same as you. Afterwards, I found out that WW6 install resets varions Connections settings incorrectly (part of beta).
Go to Settings / GPRS settings and make sure you have CHAP selected
My install had PAP selected.
Jeff
Sounds to me like the rom you have used has a feature/setting that disconnects GPRS connections for whatever reason - possibly to stop programs from auto connecting with GPRS.
Have you checked with the creator of the ROM to see if anything like this was implemented in to it? It may be fixable with a registry tweak or setting.
Mine worked both Bepe and B&B V2 ok.
GPRS:
1. Click on Start > Settings > Connections tab > Connections
2. Under the heading 'My Work Network', click on 'Add a new modem
connection'
3. The settings you require are:
4. Name = Vodafone MMS
5. Modem = Cellular Line (GPRS)
6. Click 'Next'
7. Access Point Name = wap.vodafone.co.uk
8. Click 'Next'
9. Username = wap
10. Password = wap
11. (leave the Domain field blank)
12. Click 'Finish'
Thanks Guys - Worked fine - Seems I was giving the APN wrong...
Well finally atleast it's working now...
Now only to get the Blackberry connect to work and I'm on cloud nine !!!
Hi I was trying to set my dad up with my old wizard.
He's on vodaphone and I've been able to get the GPRS working using the above settings (I also had to add a proxy server of 212.183.137 - type - HTTP port 8799) but IE is now browsing the internet.
However when I try to connect to a imap mail account it just says connecting, then says failed to connect, check settings.
Does anyone with a vodafone account know if you're able to connect to a personal mail server?
Are there any more specific proxy settings?
(start -> settings -> connections -> manage exsiting connections -> proxy settings ->advanced)
Or any advice from someone who's been able to get this working.
Cheers
Matt
All Carrier UK Settings
I downloaded this from the HTC Site - It has the settings for all carriers...Maybe this will help.
Thanks tried this, but it has an APN of internet and these settings always give me the
'answering modem has disconnected error'
I used to get the sae error and then I called up Vodafone and told them. They reset the SIM from their side and things started working fine.
OK thanks for that. I'll just hand it over to my dad with GPRS working and see if he can get his sim card reset.
Cheers
Matt
I have a verizon 6900 that I updated using NFSFAN's WM6.5 1.00 FINAL ROM and now I cannot get the internet to work. I went back to the factory 6.1 and was unable to even make calls, so I spoke with verizon and got the phone working but they were unable to get the internet working. I flashed the ROM with the WM6.5 1.00 again and ran a couple different provisions and I still cannot get the internet. Can someone please help.
Sorry it keeps asking for username and password.
internet
VZW can tell you the user name and password its something simple like vzw3g or something. If you have that setup correctly you may be in the same boat im in. I can not connect to the internet. I did a hard reset some time back and lost the ability to data connect. I contacted the vzw techies who could not solve the problem, went into the store who could not solve the problem, went back to the "techs" on the phone who could not solve the problem. They all said it was my software which I think is bs. The problem is not my software because my phone tries to connect to their network and I have no known software issues. It has to be on the network end where the network wont recognize my phone. I quit working on the problem because I dont use data right now anyways and was on a pay as you go data plan so it was vzw's financial loss that i can not use data.
This fixed my Verizon Phone
1) dial ##778, enter in 000000 for the password
2) copy the ESN(Hex) Exactly how it is(you need the caps)
3) click View Info in the lower left corner and click M.IP Settings
4) Change MIP_MODE to Simple IP Only
5) Click View Info again and goto Security
6a) HDR AN AUTH User Id = [email protected] (fill the 5's with your 10-digit number)
6b) HDR AN AUTH Password = (Your ESN(Hex) With CAPS)
6c) PPP USER ID = [email protected] (Same as above)
6d) PPP PASSWORD = vzw
I left DUN log on blank
Change settings under
7) Click OK in the top right corner and save and reboot.
Goto Start->Settings->Connections->Connections
9) Click Manage existing connections
10) Select Alltel Wireless and click Edit...
11) Click Next in the lower right cornder until you get to the user name and password screen
12a) Username is [email protected] (Same as above)
12b) Password is vzw
13) Click Finish in the lower right corner
14) Enjoy verizon wireless internet!
Also make sure you update your PRL to an verizon one.
Go to M.IP Default Profile.
Enable Profile: Enable
NAI: [email protected]
DUN NAI: leave blank
But know I cannot update my radio. This has been an issue since I unlocked my phone. I cannot get the bootloader to load from my 1 GB microSD. I am not sure what to do. XV 6900
I have had this problem for months now.I have tried everything possible. Called vzw i dunno how many time I dunno how many new A-keys I have had.I even tried these settings. Nothing seems to be workn.But who knows. Only way I can get internet on this phone is to manullay put my phone in 1x. which is way slow but it works
I got everything working great now. I ran the .40 unlocker and then flashed back to the factory ROM from HTC. I entered all of the setting back into the phone that I listed above and then flashed it again with the factory ROM. All of this put my phone back to factory. I then re flashed it with the 2.31 and was able to update radio and flash with the 6.5 ROM from SD card in phone.
THIS IS FOR EDUCATIONAL PURPOSE ONLY
Guide on Flashing HTC Droid Incredible to Boost Mobile
What you NEED
QPST
QXDM 3.11 (Google is your friend)
CDMA Tools 2.7 (Demo is good too)
Patience
HTC Diagnostic or HTC USB MODEM Drivers (I will include Win7 x64 Driver)
Donor Phone Driver (Google is your friend)
Winhex (Again, Google )
Boost Mobile Account [seems difficult for those without it]
What you DONT NEED
Wife
Kids
*Install all drivers and programs**
If you do not know how to manually install a driver, I suggest you stop where you are now.
Step 1: Donor Phone MSL/SPC
This one is really simple, call Boost Mobile Customer Rep. (To get directly to them after the guy says "For espanol press 5", just press 5, then press 2, and wait for it to ask you "To chat with a Boost Customer Rep press 0") and tell them your phone needs to be programmed and they will tell you to dial ##MSL#. SAVE THAT NUMBER and then just hang up on them.
Step 1.5:
Incase you are scared to talk with boost mobile, or you don't know your 6 digit MSL/SPC code you will have to find it manually. *Sigh*
Open QPST, click [Add New Port] on the bottom right, then uncheck [Show serial...] on the bottom left corner and on the screen to the left you should see your Donor's Port number, add it and make note of it.
Next open CDMA workshop, connect to your phones Port (COM) number, click read and your phone information will be displayed on the left.
Click on the memory tab, under memory/Eeprom put start Address: 0363:0000 leave the size at 65536 bytes, now click read and save the .bin files on your desktop.
FINALLY, open up Win Hex, open the memory file you just saved, click on specialist- Gather Text; Recognize text by "6" uncheck everything expect for " Numbers" press "OK", save the file anywhere you like. You should end up with a .txt document with 1 or more 6 digit numbers; one of them is the SPC for your phone, write it or them down.
Step 2: NV Items
Open CDMA Workshop again, go to Security under SPC write your MSL code and click SPC -> Send. It should say phone is unlocked.
Now go to Memory tab, and click Read NV_Items, and you will read NV_Items 455, 466, 1192, and 1194. Save them all.
Step 3: NAM 1 & 2
Stay in CDMA Workshop, and click the NAM Tab. Click “Read” this will display all your phones information inside of “NAM 1” Save the filename as NAM 1 and do the same for NAM 2.
Step 4: M.IP
Close Cdma Workshop. Open Service Programming and enter your Donor phones SPC. Click Read and navigate to the “MIP” Tab, we need your Donor phones NAI. Click on Profile 1 and copy down everything just to be safe. Do the same for Profile 0 if available.
Step 5: HA & AAA Passwords
HA Password for both Profiles will be "secret" in text formatClose Service Programming and open QXDM. Now in the Command Prompt on the top screen type in "SPC [MSL]" Then type in “Requestnvitemread ds_mip_ss_user_prof 1” to retrieve your Profile 1 AAA 6 Digit password. It will be the first 6 Digits in DIAG RX, which is written in HEX mode. For Profile 0, simply open NV_Item 466 all numbers after the number 10 and before the last pair of 0's will be your Profile 0 AAA. Or you can type in QXDM Requestnvitemread ds_mip_ss_user_prof and it will be all the Digits in AAA SHared DIAG RX.
If it says Access Denied it means you do not have a Profile 0. *Dont worry about it*
DONT EVER TURN ON THE DONOR PHONE'S RADIO AGAIN, PUT IT ON AIRPLANE MODE OR SOMETHING
Step 6: Root your HTC DROID INREDIBLE
Follow directions --> http://androidforums.com/incredible...ked-3-rooting-stock-incredible-evo-2-2-a.html
Step 7: Writing NAM and NV Items
Plug in your Droid Incredible to the PC. Open QPST and add its port number. Open CDMA and connect then read the Incredible, next go to Security Tab and under SPC write 000000 and send SPC.
Next go to the "Memory" tab, NV Items and write the 4 NV Items we saved from your donor phone earlier.465, 466, 1192, and 1194. Then navigate to the “NAM” TAB and Write the Nam 1 and Nam 2 Files we saved earlier by clicking Load before each on of them. If done correctly it should display your donor’s phone number and other information.
TYPE IN ##DIAG# IN YOUR DROID TO GO INTO MODEM MODE
Step 8: Zero'ing ESN & MEID
Close CDMA Workshop and open QXDM, Options- Communications- Target Port/ select your Droid Incredible's Port, click OK. You should now be connected to your phone. (if you have any trouble connecting to QXDM make sure you set your com port in QPST Configuration and use the same in Qxdm's communications, So you can actually see what's going on from the View drop down screen, select Command Output. Press F4 to get to the memory view, Change Rows from 8 to 16, Find you HEX MEID and ESN by calling ##786# it will look something like this...
MEID: A1000009C57FQZ
ESN: 8373B5C5
They might have an "0x" in front of them, just ignore that, Now pay close attention, following the example MEID and ESN I provided above you are going to separate every 2 characters and then you are going to flip a few to make it backwards just follow my model and do the same to your numbers.
Original: Separated: Flipped:
MEID A1000009C57FQZ MEID A1 00 00 09 C5 7F QZ MEID QZ 7F C5 09 00 00 A1
ESN 8373B5C5 ESN 83 73 B5 C5 ESN C5 B5 73 83
*Note* Your Meid and Esn will differ from the one used in this guide please find your own and use the same method you will need this to find you Meid and Esn in the memory.
Now the tricky part, you may have to Zero them out several times so it will stick (I would consider zero'ing them several times before restarting the phone)
These are all possible ESN and MEID Locations, [ATTACHED]
At each location, find your Meid or ESN and replace it with Zeros (0) then click Write and goto the next Meid or ESN. Do not alter anything but meids or ESNS. After you Zero'ed them out type the command "Requestnvitemread MEID" and "Requestnvitemread ESN". If its Zero'ed restart the phone, if its not, you missed a spot.
To make sure its been Zero'ed out FOR SURE restart the phone and when is back on dial ##778# click View, then Display and make sure your MEID and ESN is all 0. If its not, then try again.
Step 9: Writing MEID
After you get a message that it's zero than u can proceed to write your ESN or MEID which ever you prefer.
Commands are
requestnvitemwrite scm 0x3a
requestnvitemwrite meid 0x0(Your MEID)
MEID = actual 14 digit meid (not in reverse)
If u are writing MEID no need to write the ESN.
requestnvitemwrite esn 0x(Your ESN)
esn= actual 8 digit esn (not in reverse)
Step 10: Configuring Data
Close QXDM, open Service Programming. Navigate to the M.IP tab.
3G Donor PHONES ONLY: Click profile 0 and click edit. Check and make sure your “NAI” is the correct one for boost mobile. Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s. (it may be different for your area)
NAI:[email protected]
Home address: 0.0.0.0
Primary HA address: 68.28.15.12
Secondary HA address: 68.28.31.12
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok.
Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s
NAI:[email protected] (May varie)
Home address: 0.0.0.0
Primary HA address: 255.255.255.255
Secondary HA address: 68.28.89.76
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok
Make Active User 1.
Write to phone, and restart the Droid Incredible.
Now give yourself a pat in the back because you just Fully Flashed your Droid Incredible to Boost Mobile
I have yet to Know how to configure the USE of MMS, but if you know how to drop it in here .
***THIS GUIDE WAS TAKEN FROM A GUIDE I BOUGHT ON EBAY FOR FLASHING HTC EVO TO BOOST MOBILE, AND MODIFIED TO FIT THE HTC DROID INCREDIBLE***
Any questions?
EDIT** Incase your Data isnt working try this and MAKE SURE, you have this.
1. Make sure your ACTIVE USER is 1.
2. Make sure your HTC INCREDIBLE has the same PRL as your donor phone! (THIS IS HIGHLY IMPORTANT) To extract the PRL from your donor phone simply:
Connect your donor phone, Open 'Service Programming' click 'Read from Phone' enter your MSL, and then click 'Save to File' save it anywhere. You will get a qcn file, and a rl0 file. The 'rl0' file will be the PRL.
Also this happened to me before, lol, MAKE SURE MOBILE NETWORK in 'Menu -> Settings -> Wireless and Networks is TURNED ON !!
Any more questions let me know
UPDATE: Try this by igotanmp3 to get MMS working. NOTE* It does not work with Custom Themes http://forum.xda-developers.com/showpost.php?p=16440594&postcount=69
UPDATE: For Droid Incredible S & 2 FOLLOW --> http://forum.xda-developers.com/showpost.php?p=21668680&postcount=145
So did you ever figure out the mms settings? I've seen some guy in New Jersey doing full flashes on HTC Incredibles on Boost Mobile. I tried to contact him, but it seems like he is somewhat of a prick. I've been racking my brains trying to get the mms working. So far my Dinc has talk, text, internet and Sprint TV working.
I have not yet. How did you get Sprint TV running on the Incredible though?
And i think the guide to flash a HTC Hero to alltel i believe might help... changing the APN username adress and whatnot with APN Manager apk, havent gotten around it though been too busy will try tomorrow.
Sent from my ADR6300 using XDA App
eljean said:
I have not yet. How did you get Sprint TV running on the Incredible though?
And i think the guide to flash a HTC Hero to alltel i believe might help... changing the APN username adress and whatnot with APN Manager apk, havent gotten around it though been too busy will try tomorrow.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I downloaded the Sprint TV Apk file and that was pretty much it
TRY THIS FOR MMS
MMS
************************************************** *******************************
(My original work)
After making sure web works,
1. Download APN Backup & Restore(Android Market)
2. Click Backup APNs
3. Goto your sdcard/ApnBackupRestore
4. Click the apn file and edit under windows or on your phone.
5. Look for the line that says Production and edit.....
<apn name="Production" numeric="00000" mcc="310" mnc="00" apn="1"
user="[email protected]"(may varie) server="null" password="null proxy="null"
port="" mmsproxy="" mmsport="" mmsprotocol="2.0"
mmsc="http://mm.myboostmobile.com" type="mms" />
6. Save the file(make sure you save it)
7. Open the APN Backup & Restore program
8. Click delete APNs(Very important)
9. Click Restore APNs
10. Close the program
11. Goto messages>menu>settings>connection settings. Make sure everything is as you edited. You should see Name(Production), MMSC(http://mm.myboostmobile.com), MMS proxy(not set), MMS port(not set), MMS protocol(WAP 2.0).
12. If everything is just as it is, viola you are all set...
Taken from http://www.howardforums.com/showthr...lashed-to-Revol-with-working-Internet-and-MMS and fixed to the Boost Mobile apn settings... correct it if its wonrg, Im not 100% sure on the settings...
I haven't tried it yet im still waiting for my MicroSD Card from Ebay :\... lol you be the guinnea pig let me know how it goes
this would go a lot better in the dev section
JoelZ9614 said:
this would go a lot better in the dev section
Click to expand...
Click to collapse
Ahh, I didnt know where else to put it
this is awesome.. what about PTT? does it work?
remy2501 said:
this is awesome.. what about PTT? does it work?
Click to expand...
Click to collapse
Yeah it should
DRIVERS
FORGOT to attach the DRIVERS sorry
Any possible way to go back to verizon MEID?
mttmelton said:
Any possible way to go back to verizon MEID?
Click to expand...
Click to collapse
Just write the original MEID and the phone would provision itself IF it has a clean esn
Sent from my ADR6300 using XDA App
Still no mms on the HTC Droid Incredible on Boost
Just wonder if anyone has figured out the mms settings for the HTC Droid Incredible on Boost Mobile. I paid some guy on Ebay and he emailed me back "here sorry all you do is this:
##3282#
change mms "hxxp;//mm . myboostmobile . com
reboot your phone and test the pics"
I was like WTF ##3282# does not even work on the Incredible, but I already knew the mmsc url. So has anyone figured this little speed bump? I have talk, text, internet & sprint TV working now I just need mms working.
roclikewhat said:
Just wonder if anyone has figured out the mms settings for the HTC Droid Incredible on Boost Mobile. I paid some guy on Ebay and he emailed me back "here sorry all you do is this:
##3282#
change mms "hxxp;//mm . myboostmobile . com
reboot your phone and test the pics"
I was like WTF ##3282# does not even work on the Incredible, but I already knew the mmsc url. So has anyone figured this little speed bump? I have talk, text, internet & sprint TV working now I just need mms working.
Click to expand...
Click to collapse
Same here. I used APN Manager and changed the mmsc url but then it would just give me access denied.
Sent from my ADR6300 using XDA App
Hello,
I read all posts above, but I couldn't understand completely. It is possible use htc incredible 2 on boost mobile?
I can buy one from ebay with clean esn and use it on Boost mobile?
thank you
idk
mttmelton said:
Any possible way to go back to verizon MEID?
Click to expand...
Click to collapse
to be honest with you, I am not entirely sure, theoretically it should be possible but at this moment I do not know since it is a new phone with new software etc etc. And I heard HTC is starting to lock their esn locations with some type of encryption so u cant read it.
Google around u might be able to and if u find someone who says and has backup that is possible come back to this guide and follow it .
for example. Can I activate this on boost mobile?
hxxp://xpressphones.vstore.ca/product_info.php?products_id=379
armars said:
for example. Can I activate this on boost mobile?
hxxp://xpressphones.vstore.ca/product_info.php?products_id=379
Click to expand...
Click to collapse
I did a little bit of research and so far I can conclude that it is not possible. I may be wrong though. I am 90% positive it is not posible YET lol
***THIS GUIDE WAS TAKEN FROM A GUIDE I BOUGHT ON EBAY FOR FLASHING HTC EVO TO BOOST MOBILE, AND MODIFIED TO FIT THE HTC DROID INCREDIBLE***
Click to expand...
Click to collapse
So you could flash it to boost mobile, but couldn't activate?
armars said:
So you could flash it to boost mobile, but couldn't activate?
Click to expand...
Click to collapse
Yeah if your donor phone is already activated
I am using a HTC One V CDMA (Virgin Mobile USA) in India on Reliance CDMA network. The phone was flashed to Reliance and everything is working fine ie I can make/receive calls/sms etc. 1x / EVDO credentials have already been written to the phone.
Now the issue is that I am not able to enable data or the data connection doesn't get enabled automatically. When I try to enable data it says "Disconnected because service is unavailable". But if I press the "Activate this device" button in the settings section, an activation screen 1..2..3 comes up, then wait for 3-4 sec, the 3G symbol gets displayed meaning its able to make a data connection. Now if I go back to the settings page and enable data it successfully connects, and I am able to access internet at EVDO speeds. But after some idle time, the data connection is automatically disconnected and to reconnect I need to repeat the above process. Even if I intentionally disconnect data and try to reconnect, it doesn't happen and I need to go through the "Activate this device" process.
I believe some sort of initialization is missing which is done during the "Activate this device" phase and hence I am able to connect. What could be the reason for this? Is it some setting/configuration that needs to be enabled?
Please pour your valuable tips to resolve this issue.
Thanks
Fixed the issue with auto connection of data, not sure what fixed it exactly, but here are the last changes that I made after which it started working.
You need to use the tool QPST (I used version 2.7.378, an older version didn't work) for this.
In the M.IP tab, disable all profiles except profile 1
Then edit profile 1 and make changes (check attachment)
Then in RmNet tab enable auto connect for device 0 and 1.
After that
PPP Config --> Um --> Enter user/pass as "net" (Req Pw enc should be unchecked)
PPP Config --> AN --> Enter the EVDO credentials given by the MEID registrar (Req Pw enc should be unchecked)
Please note that I got it working merely by trial and error and some of the above changes may not be required and I am not even sure why they are necessary , but with the above configuration I am able to enable data without any problem.
iamvarkey said:
Fixed the issue with auto connection of data, not sure what fixed it exactly, but here are the last changes that I made after which it started working.
You need to use the tool QPST (I used version 2.7.378, an older version didn't work) for this.
In the M.IP tab, disable all profiles except profile 1
Then edit profile 1 and make changes (check attachment)
Then in RmNet tab enable auto connect for device 0 and 1.
After that
PPP Config --> Um --> Enter user/pass as "net" (Req Pw enc should be unchecked)
PPP Config --> AN --> Enter the EVDO credentials given by the MEID registrar (Req Pw enc should be unchecked)
Please note that I got it working merely by trial and error and some of the above changes may not be required and I am not even sure why they are necessary , but with the above configuration I am able to enable data without any problem.
Click to expand...
Click to collapse
Thanks for the above method .. Did you use this method after loading the NVDump file given by the registrar ? ... ALso when i edit the UM and AM feilds and issue write to the phone its showing as the phone has a read only NV ITEMS.
yakaaithiri said:
Thanks for the above method .. Did you use this method after loading the NVDump file given by the registrar ? ... ALso when i edit the UM and AM feilds and issue write to the phone its showing as the phone has a read only NV ITEMS.
Click to expand...
Click to collapse
Well, I had loaded the NVDump earlier, but as I had mentioned it would connect first but if you disconnect or get disconnected it wouldn't reconnect.
Check if the SPC is correct, cause I never got any error like that.
iamvarkey said:
Well, I had loaded the NVDump earlier, but as I had mentioned it would connect first but if you disconnect or get disconnected it wouldn't reconnect.
Check if the SPC is correct, cause I never got any error like that.
Click to expand...
Click to collapse
OP, I am taking a HTC One V for my dad and plan to use it with reliance, could you please tell me what I need to do ?
I already unlocked and rooted the phone. Do I just walk into a reliance store or do something more on computer etc before going there ?
experx said:
OP, I am taking a HTC One V for my dad and plan to use it with reliance, could you please tell me what I need to do ?
I already unlocked and rooted the phone. Do I just walk into a reliance store or do something more on computer etc before going there ?
Click to expand...
Click to collapse
You are talking about Reliance CDMA right?
If yes you need to get the MEID registered, will cost you about Rs 500. Reliance store guys will not do it, have to get it done through some 3rd party provider.
It says Read only NV Items for me too
2kool2btrue said:
It says Read only NV Items for me too
Click to expand...
Click to collapse
That's fine. Its only for one particular NVITEM. Just ignore it.
Hello varkey bhai,
Please Help me with the problem.
1. my meid is registered with reliance.
2. my prl is 00005
3. i am using the handset since 10 months.
4. evdo is also activated on my number.
But i am just getting 1x speeds.
Only thing i feel, i am missing out is on the username,Password,NV file,akey etc.
I have not received the above details from my reigstrar
Can u please guide me how this can be done to start evdo speeds.
Thanks in advance
vakubhai said:
Only thing i feel, i am missing out is on the username,Password,NV file,akey etc.
I have not received the above details from my reigstrar
Click to expand...
Click to collapse
Without the correct EVDO credentials, you won't be able to get EVDO speeds. You need to check with your MEID registrar.
NV dump is not really required and the same can be configured manually if you have the credentials as I have described above. Since you are able to make and receive calls, it looks like the Akey is already set.
so that means if i dont get the credentials from the registrar EVDO can never be started on this handset??
iamvarkey said:
Without the correct EVDO credentials, you won't be able to get EVDO speeds. You need to check with your MEID registrar.
NV dump is not really required and the same can be configured manually if you have the credentials as I have described above. Since you are able to make and receive calls, it looks like the Akey is already set.
Click to expand...
Click to collapse
vakubhai said:
so that means if i dont get the credentials from the registrar EVDO can never be started on this handset??
Click to expand...
Click to collapse
You could check with some other person who does MEID registration, maybe they can retrieve the credentials. But without it, EVDO will not work.
i have an htc droid incredible and i am facing the same problem as mentioned above are the steps above same for my phone also
vikisharma said:
i have an htc droid incredible and i am facing the same problem as mentioned above are the steps above same for my phone also
Click to expand...
Click to collapse
Try it out. It should work.
NVITEM Dump file
iamvarkey said:
That's fine. Its only for one particular NVITEM. Just ignore it.
Click to expand...
Click to collapse
Hello iamvarkey,
i have a sprint htc one that i have flashed but still dont have signal for voice and data. will the nv dump file help resolve this issue and how can i get it.
thanks
jewelman said:
Hello iamvarkey,
i have a sprint htc one that i have flashed but still dont have signal for voice and data. will the nv dump file help resolve this issue and how can i get it.
thanks
Click to expand...
Click to collapse
Simply by loading the Reliance PRL file, you should have voice signal, if not you are doing something wrong.
iamvarkey said:
Simply by loading the Reliance PRL file, you should have voice signal, if not you are doing something wrong.
Click to expand...
Click to collapse
i had done that but didnt work. the phone was sent to me without activating it first with sprint, can this affect it
jewelman said:
i had done that but didnt work. the phone was sent to me without activating it first with sprint, can this affect it
Click to expand...
Click to collapse
I don't think that would be a problem.
Make sure you are using the right PRL file.
No above steps required.
You must have flashed NV Dump already.
Your phone must be activated via *228 already.
Just perform below mentioned steps :
1) Put your phone in Diag Mode by dialing ##3424#
2) Get HTC Diag Mode driver if you don't have it already
3) Download DFS Demo version from DFS Website
4) Connect your phone with DFS, send SPC
5) Now, go to Programming tab -> Data ->
6) Click Read
7) At PPP tab, write "net" (without quotes) to SIP NAI, UID, Pwd field.
Restart the device and here you go, your device would get connected to internet instantly.
keval32 said:
No above steps required.
You must have flashed NV Dump already.
Your phone must be activated via *228 already.
Just perform below mentioned steps :
1) Put your phone in Diag Mode by dialing ##3424#
2) Get HTC Diag Mode driver if you don't have it already
3) Download DFS Demo version from DFS Website
4) Connect your phone with DFS, send SPC
5) Now, go to Programming tab -> Data ->
6) Click Read
7) At PPP tab, write "net" (without quotes) to SIP NAI, UID, Pwd field.
Restart the device and here you go, your device would get connected to internet instantly.
Click to expand...
Click to collapse
Keval,
I recently bought a HTC One E8 and am using Reliance CDMA on Slot-1 and facing this issue.
Would the steps jotted by you help me?
Thanks,
Vinay
I need help flashing my LGOG to P+!!! If you or know someone that has done it successfully with wireless workshop, please PM me or reply to my post. I'm willing to compensate ($20?) for a remote flash. Thank you!
alibabakazam said:
I need help flashing my LGOG to P+!!! If you or know someone that has done it successfully with wireless workshop, please PM me or reply to my post. I'm willing to compensate ($20?) for a remote flash. Thank you!
Click to expand...
Click to collapse
I'm not sure if this is what you need but I ran across it a long time ago......hope it helps
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Sprint Phone To PagePlus 3G MVDO Programming
Software Requirements:
Cheap/Free - New QPST & QXDM Pro or DFS CDMA Tool Donor/Demo
Premium - CDMA Workshop ( FOR THIS PHONE YOU WILL NEED THE PAID VERSION --- NO OTHER OPTION WILL WORK )
ESN Change - not required for Verizon clean non-blacklisted phones
(Signed Keys Required):
To get 3G Data a Phone must obtain Verizon/PagePlus unique ID/Keys after activation that is delivered to each phone.
Each unique HAA/AA password key is tied to the account phone number.
Activation is network new number/port setup, phone to phone ESN/MEID swap, or phone number change.
QPST will write to my HTC EVO. For non-data programming once you do the above just allow the phone to self-activation. It completes but it doesn't program the 3G data.
Requirements:
1. Sprint 3G Cellphone (prefer clean ESN)
2. Either the latest QPST & QXDM Pro (recommended) , CDMA Workshop, or DFS Tool (recommended)
3. Modified Sprint PRL for Verizon Network
4. Verizon DMU Key ( THIS IS THE "10 KEY" IN EFS )
First you must program the Phone to Verizon/PagePlus.
A. Change MSL from Sprint MSL unlock,
ehow Sprint MSL or MSL Reader = marketplace download {require root}
B. Next Program Verizon format contained within documents if not porting with a preexisting phone number use [email protected] and [email protected] for phone provisioning.
C. Copy/Push the DMU Key to Phone’s DMU folder
D. Program the Verizon PRL
E. You must Disable mobile network data before you Dial *228 Activation
F. Activate the Phone with *228 which will update most data information then reboot
G. Within 10 – 15 mins of Activation do the following
H. Verify and correct your [email protected] in phone provisioning to final phone number
I. Program the phone with the following:
Program all Verizon phone passwords and HA Shared passwords to "vzw" without quotes. Click profile 0 and click edit.
Check and make sure your “NAI” is the correct one for Verizon/PagePlus network:
MCC 310 and MNC 00
NAI: [email protected]
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 0.0.0.0
DMU Pub Key: 10
MN Authenticator: 0
Rev Tunnel Preferred: Checked now with both passwords hit ok.
Now Profile 1 information below must retain the same data details as profile 0.
Your AAA is [email protected]
Your initial HA Shared is vzw
Rev Tunnel Preferred: Checked now with both passwords hit ok
J. The 3G DATA Sprint trick.
On Sprint a Phone without activation will have its Active Mip profile defaulted to 0. After any type of programming the default Active Profile becomes 1 but you’ll NEED it to be set to 0 for the initial data Verizon programming connection only.
Generally changing the Phone’s Active Mip Profile by ESPT Dialer or by programming software will auto reboot the Phone.
Warning, by all means necessary AVOID the Phone reboot as it will initialize your Phone’s Active Mip Profile back to 1. There is a critical reason for this!
* You’ll need a root experimental ESPT Dialer to change the Phone’s active data profile setting which will fail to reboot.
OR
* You'll need to use CDMA or DFL Tool and change the Active Mip Profile to 0 without rebooting the active Phone. {Not sure reread I}
K. After changing Mip Profile to 0 be sure to view the changed Dialer ESPT ##DATA# “Date Profile” settings at least two as this could crash. At crash view again until the ##DATA# reloads resolves any crashing.
L. After changing the profile above your Phone’s voice and data transmission will be inactive. Toggle “Airplane” mode first ON then OFF. Now your signal bar will show an active broadcast transmission again.
M. Change network to CDMA PRL or do whatever you need to do for the Phone to maintain a stable data connection.
N. Enable the mobile data network, preferably outside. Maintain data connection for at least 10 minutes
O. Before you Reboot / Power off the Phone Disable the mobile data network again.
P. Use DFS TOOL or QXDM Pro and copy all of Mip Profile 0 data to Profile 1. Clone both your HA Shared & AAA passwords then enter all information that was programmed OTA earlier and clone to profile 1.
HA Shared Secret: shouldn't be garbled characters (OTA programming has assigned your phone unique keys)
AAA Shared Secret: shouldn't be garbled characters (OTA programming has assigned your phone unique keys)
Now you’re done!
You will get:
A. Voice
B. Text
C. 3G Data Locked
MMS Setup:
Requires you change the Phone’s APN Settings:
A. Dial ##DATA or Voice Dialer speak “Open APN”
B. Change to:
Port delete {Not Set}
Proxy delete {Not Set}
MMS http://mms.vtext.com/servlets/mms
press menu button then Save
Thanks bud!
Wow, thank you for taking the time to post all that information. It seems to be a lot more work than I thought, especially with the money I'll have to spend to get the right versions of the required software for this job. I'm seriously thinking of letting someone else just help me. Thank you again for your help!