I need help flashing my LGOG to P+!!! If you or know someone that has done it successfully with wireless workshop, please PM me or reply to my post. I'm willing to compensate ($20?) for a remote flash. Thank you!
alibabakazam said:
I need help flashing my LGOG to P+!!! If you or know someone that has done it successfully with wireless workshop, please PM me or reply to my post. I'm willing to compensate ($20?) for a remote flash. Thank you!
Click to expand...
Click to collapse
I'm not sure if this is what you need but I ran across it a long time ago......hope it helps
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Sprint Phone To PagePlus 3G MVDO Programming
Software Requirements:
Cheap/Free - New QPST & QXDM Pro or DFS CDMA Tool Donor/Demo
Premium - CDMA Workshop ( FOR THIS PHONE YOU WILL NEED THE PAID VERSION --- NO OTHER OPTION WILL WORK )
ESN Change - not required for Verizon clean non-blacklisted phones
(Signed Keys Required):
To get 3G Data a Phone must obtain Verizon/PagePlus unique ID/Keys after activation that is delivered to each phone.
Each unique HAA/AA password key is tied to the account phone number.
Activation is network new number/port setup, phone to phone ESN/MEID swap, or phone number change.
QPST will write to my HTC EVO. For non-data programming once you do the above just allow the phone to self-activation. It completes but it doesn't program the 3G data.
Requirements:
1. Sprint 3G Cellphone (prefer clean ESN)
2. Either the latest QPST & QXDM Pro (recommended) , CDMA Workshop, or DFS Tool (recommended)
3. Modified Sprint PRL for Verizon Network
4. Verizon DMU Key ( THIS IS THE "10 KEY" IN EFS )
First you must program the Phone to Verizon/PagePlus.
A. Change MSL from Sprint MSL unlock,
ehow Sprint MSL or MSL Reader = marketplace download {require root}
B. Next Program Verizon format contained within documents if not porting with a preexisting phone number use [email protected] and [email protected] for phone provisioning.
C. Copy/Push the DMU Key to Phone’s DMU folder
D. Program the Verizon PRL
E. You must Disable mobile network data before you Dial *228 Activation
F. Activate the Phone with *228 which will update most data information then reboot
G. Within 10 – 15 mins of Activation do the following
H. Verify and correct your [email protected] in phone provisioning to final phone number
I. Program the phone with the following:
Program all Verizon phone passwords and HA Shared passwords to "vzw" without quotes. Click profile 0 and click edit.
Check and make sure your “NAI” is the correct one for Verizon/PagePlus network:
MCC 310 and MNC 00
NAI: [email protected]
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 0.0.0.0
DMU Pub Key: 10
MN Authenticator: 0
Rev Tunnel Preferred: Checked now with both passwords hit ok.
Now Profile 1 information below must retain the same data details as profile 0.
Your AAA is [email protected]
Your initial HA Shared is vzw
Rev Tunnel Preferred: Checked now with both passwords hit ok
J. The 3G DATA Sprint trick.
On Sprint a Phone without activation will have its Active Mip profile defaulted to 0. After any type of programming the default Active Profile becomes 1 but you’ll NEED it to be set to 0 for the initial data Verizon programming connection only.
Generally changing the Phone’s Active Mip Profile by ESPT Dialer or by programming software will auto reboot the Phone.
Warning, by all means necessary AVOID the Phone reboot as it will initialize your Phone’s Active Mip Profile back to 1. There is a critical reason for this!
* You’ll need a root experimental ESPT Dialer to change the Phone’s active data profile setting which will fail to reboot.
OR
* You'll need to use CDMA or DFL Tool and change the Active Mip Profile to 0 without rebooting the active Phone. {Not sure reread I}
K. After changing Mip Profile to 0 be sure to view the changed Dialer ESPT ##DATA# “Date Profile” settings at least two as this could crash. At crash view again until the ##DATA# reloads resolves any crashing.
L. After changing the profile above your Phone’s voice and data transmission will be inactive. Toggle “Airplane” mode first ON then OFF. Now your signal bar will show an active broadcast transmission again.
M. Change network to CDMA PRL or do whatever you need to do for the Phone to maintain a stable data connection.
N. Enable the mobile data network, preferably outside. Maintain data connection for at least 10 minutes
O. Before you Reboot / Power off the Phone Disable the mobile data network again.
P. Use DFS TOOL or QXDM Pro and copy all of Mip Profile 0 data to Profile 1. Clone both your HA Shared & AAA passwords then enter all information that was programmed OTA earlier and clone to profile 1.
HA Shared Secret: shouldn't be garbled characters (OTA programming has assigned your phone unique keys)
AAA Shared Secret: shouldn't be garbled characters (OTA programming has assigned your phone unique keys)
Now you’re done!
You will get:
A. Voice
B. Text
C. 3G Data Locked
MMS Setup:
Requires you change the Phone’s APN Settings:
A. Dial ##DATA or Voice Dialer speak “Open APN”
B. Change to:
Port delete {Not Set}
Proxy delete {Not Set}
MMS http://mms.vtext.com/servlets/mms
press menu button then Save
Thanks bud!
Wow, thank you for taking the time to post all that information. It seems to be a lot more work than I thought, especially with the money I'll have to spend to get the right versions of the required software for this job. I'm seriously thinking of letting someone else just help me. Thank you again for your help!
Related
Hey guys, im new to this forum and im having some issues, i recentley flashed my Alltel HTC TOUCH to Cricket, got the full flash but still not abel to get on the web, i do have the right plan and i already took it back to were it got flashed, and the guys there still cant get it to work. can anyone help me with this. And if your from the 915 El Paso Tx, that would be great, Thanks
Yo i'm from 915...i can help you since i haved flashed my own phone 8)
First off can you give details about the phone.
What ROM did they install? Look in the Device information under settings/system
When you dial ##778# or ##778 and you click view....In MIP settings what does it show?
Alletl 6900 HTC TOUCH purchased new 01-05-08,
DEVICE INFORMATION
ROM Version: 3.37.NO2.200
ROM Date: 04/09/08
Radio Version: 3.37.10
Protocol Version: DCAAXAM-4350H
Hardware Version: 0001
PRL: 01014
PRI Version: 2.01_011
Browser Version: MSIE 6.0
M.I.P Setting
# of Profiles: 1
Active User Profile Inde: 1
MIP_ MODE: Simple IP Only
MIP Reg. Retire: 1
MIP Reg. Retry: 2000 ms
MIP Pre-Reg. Ti: 30
Mobile Node_ha Auther: Disable
Send a Reg. Re: Enable
Dormant Handoff Optin: Disable
Are you able to *228 and have it program successfully?
The settings look correct. What does the internet exactly say when you try to connect to the net?
wrong password or login
hey bro. should i change the plan that does not have internet and change it back, and also can you do esn swaps on My Cricket account online.
Is your phone also an Alltel HTC TOUCH
Hmmm
1. check your settings/connections/connections
and make sure everything in there is set-up for cricket. Also once in connections make sure in the advanced tab....both drop down menu's say cricket.
Start\Settings\Connections\Connections Under the General Tab Enter Cricket. Under the Modem Tab put in Cricket Mobile Web select modem to cellular line. Click next put in #777 to dial to Cricket, click next… User Name: [email protected] Password: cricket Domain: Leave Blank, click finish…under proxy settings, check these 2 boxes (this network connects to the internet, and this network uses a proxy server to connect to the internet) Proxy Server: wap.mycricket.com click advanced. The only thing with a value should be HTTP wap.mycricket.com:8080 the rest blank. Click ok and ok again, this ok should bring you back to the connections screen at the bottom click advanced. Click select networks. Under both drop downs select Cricket. Click Ok Go into Exceptions Click add new URL for each of the following settings you are going to need to click add new url again, these don’t all go under one “Add new URL” Block
*mms.mycricket.com/servlets/mms
*.mms.mycricket.com/servlets/mms
*mycricket.com/
*.mycricket.com/
*.mms.mycricket.com/
*mms.mycricket.com/
2. I have a sprint touch and it doesn't really matter alongs its a touch.
3. No i cannot do esn swaps for you but my advice would be to check the connections settings first and if that is correct call customer service and have them reset your account.
what do you mean by resetting my account
Its just as if they are refeshing/resetting your account which ever term you want to use.
I edit my previous post....follow those directions to make sure your connection settings are correct.
Long road almost there, error 67 :( calls & text ) but no data :( [evo on boost]
THE GOOD AND BAD NEWS... THE GOOD NEWS FIRST! i got my evo4g over to boost mobile with my boost account i already had open i can outgoing text and recieve text (no mms right now) i can call out and get calls in, works great shows my boost cell phone number on my evo and everything..
NOW THE PROBLEM...
my DATA doesn't work at all... i get the error 67
I TRIED THESE INSTRUCTIONS AFTER SEEING MY DATA DIDNT WORK..
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If data is not working move on to the next steps...
(Note: These are steps not verified by me as I still dont have neither 1x nor Evdo working but some people say 1 or 2 or all of these following steps combined worked for them, so i guess it depends on the network you are trying to get on)
1. First attempt to update your profile if it can or update PRL
Menu>Settings>About Phone>System Updates>Update Profile
Reboot and see if data works....
2. If still no Data, plug in your Hero to the computer, dial ##3424#, go to QPST folder and open QPST Configuration app.
Under the Ports Tab if the active COM port your phone is on is not in that list Click Add Port and add it.
Then go to Active Phones Tab, select the phone and then go to Start Clients>Service Programming
A new window opens, hit ok, then click Read From Phone on the bottom left, its gonna ask you for your MSL type it in
Then go to the M.IP Tab and under user profiles click on profile 0, click edit, and then deselect Profile Enabled, hit ok, then click Write to Phone.
Close the program unplug your hero, reboot it, and try your data again.
3. If still no data, plug in your old phone to the computer, open up QXDM
check Connections and make sure your COM port is being read.
Go to View>New>Common>NV Browser , in the Category Filter drop down menu, filter only Data
Then scroll down to ID numbers 1192 and 1194
Click read and copy down all the values in there until u reach 0x00
Then unplug your old phone and plug in your hero, dial in ##3424# and go to NV Browser
navigate to the same ID numbers 1192 and 1194, (just to be safe copy all the values here so you can revert back to the originals)
Then double click each value under the input column and it becomes changeable and change all the values to the ones from your old phone and hit write
Close QXDM unplug and reboot your hero, test Data again
4. If still no data, plug in your old phone to the computer, open up QXDM
check Connections and make sure your COM port is being read.
Go to View>New>Common>NV Browser , in the Category Filter drop down menu, filter only Data
Then scroll down to ID numbers 465 and 466
Click read and copy down all the values in there until u reach 0x00
Then unplug your old phone and plug in your hero, dial in ##3424# and go to NV Browser
navigate to the same ID numbers 465 and 466, (just to be safe copy all the values here so you can revert back to the originals)
Then double click each value under the input column and it becomes changeable and change all the values to the ones from your old phone and hit write
Close QXDM unplug and reboot your hero, test Data again
NONE OF IT WORKED.... SO I WENT TO THE SECOND SET OF INSTRUCTIONS.
Run the QPST config and plug in your phone, make sure your phone is detected in the COM port list. If not click Add New Port and add the one that it has detected your phone on. What it says may vary but USB will often be in the description.
Run QXDM click Options -> Communications and set the Target Port for the same one QPST config listed for your phone.
In the command box at the top type "spc 000000"
Note: If your SPC is not 000000 then you need to use the correct number instead!
If successful you will see a window titled "Command Output" that will output some text with the final line reading "SPC Result = Correct"
Next in the command box type "requestnvitemread ds_mip_ss_user_prof"
This will get you a lot of stuff in the Command Output window. It will start with the "DIAG TX item" section, ignore this one, we are interested in the "DIAG RX item" part.
The actual keys are 16 lines and marked in the output as 0-15. You will notice that quite handily both HA and AAA are both there. Take the part after the "0x" and that is actual key data. Just write down (or use word, notepad, whatever) to record this for safe keeping.
If you are doing this right then you have a long string of 30 characters all strung together for each key. DOUBLE CHECK YOUR COPYING! A single mistake will cause this to fail.
Putting the keys back into the phone:
Load QPST service programming, go to the M.IP tab. Double click profile 0 (in the white box) and use "Enter hex value" to enter your backups of your HA and AAA keys.
Write to phone.
Soft reset. (may not be required but I do it for good measure)
do "requestnvitemread ds_mip_ss_user_prof" for the sprint info and "requestnvitemread ds_mip_ss_user_prof 1" for the boost info
I'm telling you.. If you're getting the error 67, the following these steps above will fix it.. I'm on the Sprint network and the problem i was having was, in "Profile 0" The username which began with A000000 (this is actually your ESN #) Was from the original phone, not the donar phone... So i took the battery out the donor phone and looked at the ESN (not DEC) and began to type A00000 etc.
Then i used the steps above to get AAA Shared Secret from the Donor phone.. My AAA Shared Secret was 32 Alpha numeric characters...
i did that and still no dice.... i got the AAA key and the HA key .. both were 32 characters...
i even went as far as to get the profile info from the incognito phone, for profile 0 and 1, and made it exactly the same on my evo and addresses for the HA and alternate HA ADDRESS... still no dice.. i went into debug mode on my evo and even hit the restore to start fresh , and let it download the data via the servers... still didnt work...
i even re-entered the profile info and etc, for profile 0 and 1, and still not working
i know im close i just need to finish the puzzle please help.
oh yea, and when i go into debug mode it shows the authentication as failed.. i dont know how thats even possible I've triple checked the HA AND AAA keys via QXDM and they are the correct keys from the incognito boost phone.
THIS IS FOR EDUCATIONAL PURPOSE ONLY
Guide on Flashing HTC Droid Incredible to Boost Mobile
What you NEED
QPST
QXDM 3.11 (Google is your friend)
CDMA Tools 2.7 (Demo is good too)
Patience
HTC Diagnostic or HTC USB MODEM Drivers (I will include Win7 x64 Driver)
Donor Phone Driver (Google is your friend)
Winhex (Again, Google )
Boost Mobile Account [seems difficult for those without it]
What you DONT NEED
Wife
Kids
*Install all drivers and programs**
If you do not know how to manually install a driver, I suggest you stop where you are now.
Step 1: Donor Phone MSL/SPC
This one is really simple, call Boost Mobile Customer Rep. (To get directly to them after the guy says "For espanol press 5", just press 5, then press 2, and wait for it to ask you "To chat with a Boost Customer Rep press 0") and tell them your phone needs to be programmed and they will tell you to dial ##MSL#. SAVE THAT NUMBER and then just hang up on them.
Step 1.5:
Incase you are scared to talk with boost mobile, or you don't know your 6 digit MSL/SPC code you will have to find it manually. *Sigh*
Open QPST, click [Add New Port] on the bottom right, then uncheck [Show serial...] on the bottom left corner and on the screen to the left you should see your Donor's Port number, add it and make note of it.
Next open CDMA workshop, connect to your phones Port (COM) number, click read and your phone information will be displayed on the left.
Click on the memory tab, under memory/Eeprom put start Address: 0363:0000 leave the size at 65536 bytes, now click read and save the .bin files on your desktop.
FINALLY, open up Win Hex, open the memory file you just saved, click on specialist- Gather Text; Recognize text by "6" uncheck everything expect for " Numbers" press "OK", save the file anywhere you like. You should end up with a .txt document with 1 or more 6 digit numbers; one of them is the SPC for your phone, write it or them down.
Step 2: NV Items
Open CDMA Workshop again, go to Security under SPC write your MSL code and click SPC -> Send. It should say phone is unlocked.
Now go to Memory tab, and click Read NV_Items, and you will read NV_Items 455, 466, 1192, and 1194. Save them all.
Step 3: NAM 1 & 2
Stay in CDMA Workshop, and click the NAM Tab. Click “Read” this will display all your phones information inside of “NAM 1” Save the filename as NAM 1 and do the same for NAM 2.
Step 4: M.IP
Close Cdma Workshop. Open Service Programming and enter your Donor phones SPC. Click Read and navigate to the “MIP” Tab, we need your Donor phones NAI. Click on Profile 1 and copy down everything just to be safe. Do the same for Profile 0 if available.
Step 5: HA & AAA Passwords
HA Password for both Profiles will be "secret" in text formatClose Service Programming and open QXDM. Now in the Command Prompt on the top screen type in "SPC [MSL]" Then type in “Requestnvitemread ds_mip_ss_user_prof 1” to retrieve your Profile 1 AAA 6 Digit password. It will be the first 6 Digits in DIAG RX, which is written in HEX mode. For Profile 0, simply open NV_Item 466 all numbers after the number 10 and before the last pair of 0's will be your Profile 0 AAA. Or you can type in QXDM Requestnvitemread ds_mip_ss_user_prof and it will be all the Digits in AAA SHared DIAG RX.
If it says Access Denied it means you do not have a Profile 0. *Dont worry about it*
DONT EVER TURN ON THE DONOR PHONE'S RADIO AGAIN, PUT IT ON AIRPLANE MODE OR SOMETHING
Step 6: Root your HTC DROID INREDIBLE
Follow directions --> http://androidforums.com/incredible...ked-3-rooting-stock-incredible-evo-2-2-a.html
Step 7: Writing NAM and NV Items
Plug in your Droid Incredible to the PC. Open QPST and add its port number. Open CDMA and connect then read the Incredible, next go to Security Tab and under SPC write 000000 and send SPC.
Next go to the "Memory" tab, NV Items and write the 4 NV Items we saved from your donor phone earlier.465, 466, 1192, and 1194. Then navigate to the “NAM” TAB and Write the Nam 1 and Nam 2 Files we saved earlier by clicking Load before each on of them. If done correctly it should display your donor’s phone number and other information.
TYPE IN ##DIAG# IN YOUR DROID TO GO INTO MODEM MODE
Step 8: Zero'ing ESN & MEID
Close CDMA Workshop and open QXDM, Options- Communications- Target Port/ select your Droid Incredible's Port, click OK. You should now be connected to your phone. (if you have any trouble connecting to QXDM make sure you set your com port in QPST Configuration and use the same in Qxdm's communications, So you can actually see what's going on from the View drop down screen, select Command Output. Press F4 to get to the memory view, Change Rows from 8 to 16, Find you HEX MEID and ESN by calling ##786# it will look something like this...
MEID: A1000009C57FQZ
ESN: 8373B5C5
They might have an "0x" in front of them, just ignore that, Now pay close attention, following the example MEID and ESN I provided above you are going to separate every 2 characters and then you are going to flip a few to make it backwards just follow my model and do the same to your numbers.
Original: Separated: Flipped:
MEID A1000009C57FQZ MEID A1 00 00 09 C5 7F QZ MEID QZ 7F C5 09 00 00 A1
ESN 8373B5C5 ESN 83 73 B5 C5 ESN C5 B5 73 83
*Note* Your Meid and Esn will differ from the one used in this guide please find your own and use the same method you will need this to find you Meid and Esn in the memory.
Now the tricky part, you may have to Zero them out several times so it will stick (I would consider zero'ing them several times before restarting the phone)
These are all possible ESN and MEID Locations, [ATTACHED]
At each location, find your Meid or ESN and replace it with Zeros (0) then click Write and goto the next Meid or ESN. Do not alter anything but meids or ESNS. After you Zero'ed them out type the command "Requestnvitemread MEID" and "Requestnvitemread ESN". If its Zero'ed restart the phone, if its not, you missed a spot.
To make sure its been Zero'ed out FOR SURE restart the phone and when is back on dial ##778# click View, then Display and make sure your MEID and ESN is all 0. If its not, then try again.
Step 9: Writing MEID
After you get a message that it's zero than u can proceed to write your ESN or MEID which ever you prefer.
Commands are
requestnvitemwrite scm 0x3a
requestnvitemwrite meid 0x0(Your MEID)
MEID = actual 14 digit meid (not in reverse)
If u are writing MEID no need to write the ESN.
requestnvitemwrite esn 0x(Your ESN)
esn= actual 8 digit esn (not in reverse)
Step 10: Configuring Data
Close QXDM, open Service Programming. Navigate to the M.IP tab.
3G Donor PHONES ONLY: Click profile 0 and click edit. Check and make sure your “NAI” is the correct one for boost mobile. Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s. (it may be different for your area)
NAI:[email protected]
Home address: 0.0.0.0
Primary HA address: 68.28.15.12
Secondary HA address: 68.28.31.12
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok.
Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s
NAI:[email protected] (May varie)
Home address: 0.0.0.0
Primary HA address: 255.255.255.255
Secondary HA address: 68.28.89.76
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok
Make Active User 1.
Write to phone, and restart the Droid Incredible.
Now give yourself a pat in the back because you just Fully Flashed your Droid Incredible to Boost Mobile
I have yet to Know how to configure the USE of MMS, but if you know how to drop it in here .
***THIS GUIDE WAS TAKEN FROM A GUIDE I BOUGHT ON EBAY FOR FLASHING HTC EVO TO BOOST MOBILE, AND MODIFIED TO FIT THE HTC DROID INCREDIBLE***
Any questions?
EDIT** Incase your Data isnt working try this and MAKE SURE, you have this.
1. Make sure your ACTIVE USER is 1.
2. Make sure your HTC INCREDIBLE has the same PRL as your donor phone! (THIS IS HIGHLY IMPORTANT) To extract the PRL from your donor phone simply:
Connect your donor phone, Open 'Service Programming' click 'Read from Phone' enter your MSL, and then click 'Save to File' save it anywhere. You will get a qcn file, and a rl0 file. The 'rl0' file will be the PRL.
Also this happened to me before, lol, MAKE SURE MOBILE NETWORK in 'Menu -> Settings -> Wireless and Networks is TURNED ON !!
Any more questions let me know
UPDATE: Try this by igotanmp3 to get MMS working. NOTE* It does not work with Custom Themes http://forum.xda-developers.com/showpost.php?p=16440594&postcount=69
UPDATE: For Droid Incredible S & 2 FOLLOW --> http://forum.xda-developers.com/showpost.php?p=21668680&postcount=145
So did you ever figure out the mms settings? I've seen some guy in New Jersey doing full flashes on HTC Incredibles on Boost Mobile. I tried to contact him, but it seems like he is somewhat of a prick. I've been racking my brains trying to get the mms working. So far my Dinc has talk, text, internet and Sprint TV working.
I have not yet. How did you get Sprint TV running on the Incredible though?
And i think the guide to flash a HTC Hero to alltel i believe might help... changing the APN username adress and whatnot with APN Manager apk, havent gotten around it though been too busy will try tomorrow.
Sent from my ADR6300 using XDA App
eljean said:
I have not yet. How did you get Sprint TV running on the Incredible though?
And i think the guide to flash a HTC Hero to alltel i believe might help... changing the APN username adress and whatnot with APN Manager apk, havent gotten around it though been too busy will try tomorrow.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I downloaded the Sprint TV Apk file and that was pretty much it
TRY THIS FOR MMS
MMS
************************************************** *******************************
(My original work)
After making sure web works,
1. Download APN Backup & Restore(Android Market)
2. Click Backup APNs
3. Goto your sdcard/ApnBackupRestore
4. Click the apn file and edit under windows or on your phone.
5. Look for the line that says Production and edit.....
<apn name="Production" numeric="00000" mcc="310" mnc="00" apn="1"
user="[email protected]"(may varie) server="null" password="null proxy="null"
port="" mmsproxy="" mmsport="" mmsprotocol="2.0"
mmsc="http://mm.myboostmobile.com" type="mms" />
6. Save the file(make sure you save it)
7. Open the APN Backup & Restore program
8. Click delete APNs(Very important)
9. Click Restore APNs
10. Close the program
11. Goto messages>menu>settings>connection settings. Make sure everything is as you edited. You should see Name(Production), MMSC(http://mm.myboostmobile.com), MMS proxy(not set), MMS port(not set), MMS protocol(WAP 2.0).
12. If everything is just as it is, viola you are all set...
Taken from http://www.howardforums.com/showthr...lashed-to-Revol-with-working-Internet-and-MMS and fixed to the Boost Mobile apn settings... correct it if its wonrg, Im not 100% sure on the settings...
I haven't tried it yet im still waiting for my MicroSD Card from Ebay :\... lol you be the guinnea pig let me know how it goes
this would go a lot better in the dev section
JoelZ9614 said:
this would go a lot better in the dev section
Click to expand...
Click to collapse
Ahh, I didnt know where else to put it
this is awesome.. what about PTT? does it work?
remy2501 said:
this is awesome.. what about PTT? does it work?
Click to expand...
Click to collapse
Yeah it should
DRIVERS
FORGOT to attach the DRIVERS sorry
Any possible way to go back to verizon MEID?
mttmelton said:
Any possible way to go back to verizon MEID?
Click to expand...
Click to collapse
Just write the original MEID and the phone would provision itself IF it has a clean esn
Sent from my ADR6300 using XDA App
Still no mms on the HTC Droid Incredible on Boost
Just wonder if anyone has figured out the mms settings for the HTC Droid Incredible on Boost Mobile. I paid some guy on Ebay and he emailed me back "here sorry all you do is this:
##3282#
change mms "hxxp;//mm . myboostmobile . com
reboot your phone and test the pics"
I was like WTF ##3282# does not even work on the Incredible, but I already knew the mmsc url. So has anyone figured this little speed bump? I have talk, text, internet & sprint TV working now I just need mms working.
roclikewhat said:
Just wonder if anyone has figured out the mms settings for the HTC Droid Incredible on Boost Mobile. I paid some guy on Ebay and he emailed me back "here sorry all you do is this:
##3282#
change mms "hxxp;//mm . myboostmobile . com
reboot your phone and test the pics"
I was like WTF ##3282# does not even work on the Incredible, but I already knew the mmsc url. So has anyone figured this little speed bump? I have talk, text, internet & sprint TV working now I just need mms working.
Click to expand...
Click to collapse
Same here. I used APN Manager and changed the mmsc url but then it would just give me access denied.
Sent from my ADR6300 using XDA App
Hello,
I read all posts above, but I couldn't understand completely. It is possible use htc incredible 2 on boost mobile?
I can buy one from ebay with clean esn and use it on Boost mobile?
thank you
idk
mttmelton said:
Any possible way to go back to verizon MEID?
Click to expand...
Click to collapse
to be honest with you, I am not entirely sure, theoretically it should be possible but at this moment I do not know since it is a new phone with new software etc etc. And I heard HTC is starting to lock their esn locations with some type of encryption so u cant read it.
Google around u might be able to and if u find someone who says and has backup that is possible come back to this guide and follow it .
for example. Can I activate this on boost mobile?
hxxp://xpressphones.vstore.ca/product_info.php?products_id=379
armars said:
for example. Can I activate this on boost mobile?
hxxp://xpressphones.vstore.ca/product_info.php?products_id=379
Click to expand...
Click to collapse
I did a little bit of research and so far I can conclude that it is not possible. I may be wrong though. I am 90% positive it is not posible YET lol
***THIS GUIDE WAS TAKEN FROM A GUIDE I BOUGHT ON EBAY FOR FLASHING HTC EVO TO BOOST MOBILE, AND MODIFIED TO FIT THE HTC DROID INCREDIBLE***
Click to expand...
Click to collapse
So you could flash it to boost mobile, but couldn't activate?
armars said:
So you could flash it to boost mobile, but couldn't activate?
Click to expand...
Click to collapse
Yeah if your donor phone is already activated
I am NOT RESPONSIBLE FOR ANY DAMAGE you cause to YOUR device. I am just trying to help
yall out
How to flash Verizon HTC One X to Boost Mobile:
talk/text/web
YOU WILL NEEED:
QPST
QXDM
CDMA Workshop
Hex Editor
HTC Diag Drivers
Get Donor information, MDN, MSID, and Data information. For help
goto http://forum.xda-developers.com/showthread.php?t=1156930
1. Plug in phone to computer and dial ##3424# and hit send.
2. install regular diag drivers for both the regular modem and 9k
modem.
3. Load up phone in CDMA Workshop. Connect to your regular modem
and Send SPC of 000000, and goto other. Under R-IUM change to
config to NV only and send. After send the prl.
Next disconnect and goto the 9k modem and change the R-ium config
to nv only and send. Send the prl as well.
manually Restart the phone.
4. After phone restarts, load up QPST, and goto the EFS explorer.
goto your regular modem and create a new directory called "open
sesame door". Manually restart phone.
5. After restart, load up EFS explorer again. DO THIS FOR BOTH
MODEMS.
Go into nvm > num folder.
Copy files 0 and 1943 to your desktop.
OPen up with a HEX editor.
Make all data in both files zeros.
After you do so, send back to the phone in the num folder and
overwrite the exsisting ones.
Manually restart your phone.
6. After your phone restarts your meid should be zeros. check by
going to ##786#.
7. Load up QPST, and then QXDM.
DO THIS FOR BOTH MODEMS.
send Password 01f2030f5f678ff9
and then "requestnvitemwrite meid 0x00MEIDHERE"
8. Next load up QPST, get your donors phone information and enter
it. (use cricketusers link at bottom for guide)
IMPORTANT: In order for your DATA TO WORK and to get 3G, you must
put the active user in the m.i.p settings to 1. Restart your phone
and you now have a HTC One X on Boost mobile.
data info:
Step 10: Configuring Data
Close QXDM, open Service Programming. Navigate to the M.IP tab.
3G Donor PHONES ONLY: Click profile 0 and click edit. Check and
make sure your “NAI” is the correct one for boost mobile. Enter
your HA Shared password first, then enter your AAA Password into
the text box, next Enter all information that you saved earlier and
put them in the required box’s. (it may be different for your area)
NAI:[email protected]
Home address: 0.0.0.0
Primary HA address: 68.28.15.12
Secondary HA address: 68.28.31.12
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok.
Enter your HA Shared password first, then enter your AAA Password
into the text box, next Enter all information that you saved
earlier and put them in the required box’s
NAI:[email protected] (May varie)
Home address: 0.0.0.0
Primary HA address: 255.255.255.255
Secondary HA address: 68.28.89.76
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok
Make Active User 1.
9. cant find out how to change the mms settings, so if someone knows please, tell
Thanks to anita_russell, http://forum.xda-
developers.com/archive/index.php/t-1614567.html.
http://www.cricketusers.com/verizon-htc-thunderbolt/16298-tutorial
-how-full-flash-htc-thunderbolt-cricket-wireless-almost.html
Thanks to Oriax123
thanks to eljean, http://forum.xda-developers.com/showthread.php?
t=1156930. http://forum.xda-developers.com/showthread.php?t=1156930
##3424# Doesn't work.
Sent from my HTC One X using XDA
yeah it does, did you press send after?
One X is a GSM phone. Boost Mobile is CDMA.
Hi i recently flashed my sprint gs3 to boost on my own and am having some difficulties with the getting the 3g to work and the mss to send. I tried a guide for mms but it wouldnt let me change the first setting described and im not able to link it as im a new member. As for the 3g i bought my donor info off of ebay and I cant figure out how to get the ha and aaa keys from the files i received. They were 5 text files with numbers in titled 465 466 1192 and 1194 also another file i used. Any help at all would be much apprreciated
nigpeen said:
Hi i recently flashed my sprint gs3 to boost on my own and am having some difficulties with the getting the 3g to work and the mss to send. I tried a guide for mms but it wouldnt let me change the first setting described and im not able to link it as im a new member. As for the 3g i bought my donor info off of ebay and I cant figure out how to get the ha and aaa keys from the files i received. They were 5 text files with numbers in titled 465 466 1192 and 1194 also another file i used. Any help at all would be much apprreciated
Click to expand...
Click to collapse
Add the link to the guide you used (put spaces between the different sections)
Like this: www DOT boost guide site DOT com / guide DOT html
CNexus said:
Add the link to the guide you used (put spaces between the different sections)
Like this: www DOT boost guide site DOT com / guide DOT html
Click to expand...
Click to collapse
I got the phone ready and set up an account and then over the air activated and updated the prls and such then rooted it to try this guide for the mms but the first setting it says to change would not change on my phone it just reverted back to the way it was.
http :/ /forums .androidcentral.com/sprint-galaxy-s-iii/203833 -how-get-mms-pictures- samsung-galaxy-s3-flash-boost-mobile.html
As for the 3G It displays the 3G logo but in the settings it says 1xRTT:6 under mobile network type. To get the 3g to work i need to figure out how to get the ha and aaa keys from the donor info i purchased. And again any info would be very much appreciated
first, which doner are you using?
the HA key is "secret" without the quotes
1192 is where you'll find the AAA key, it should be the 10 digits after the 0's
all you need is your user name & that should fix your 3g.
for MMS
replace the apn-config.xml file in
root/system/etc
reboot into recovery & fix permissions
remember to do this EVERYTIME you flash a new rom
reboot system
then ##DATA#
edit
enter your msl
other
then lte apn
& select the new apn file
also, dont forget to fix the mmsc url
J_apa_n said:
first, which doner are you using?
the HA key is "secret" without the quotes
1192 is where you'll find the AAA key, it should be the 10 digits after the 0's
all you need is your user name & that should fix your 3g.
for MMS
replace the apn- config . xml file in
root/system/etc
reboot into recovery & fix permissions
remember to do this EVERYTIME you flash a new rom
reboot system
then ##DATA#
edit
enter your msl
other
then lte apn
& select the new apn file
also, dont forget to fix the mmsc url
Click to expand...
Click to collapse
The donor info ii have is either from an incognito or a rant they didnt specify. The guide im using says to do this "3G working using DFS 4.0.0.4 or 4.0.0.5
14. Click on the ports button and connect to the proper port
put in your SPC code and click on the send spc button
15. Go to the Programming tab.
16 Click on the Data sub tab.
17. Click on Read button.
18. Under PAP:
UID: samsung01 @ sprintpcs dot com
Pwd: samsung
19. Under HDR AN:
NAI: MEID @ hcm.sprintpcs dot com
Pwd: (checked) enter your 32 digit HEX AAA password
20. Under HDR AN Long:
UID: MEID @ hcm.sprintpcs dot com
Pwd: (checked) enter your 32 digit HEX AAA password
21. Put a check mark on "Authentication require password encryption"
22. Click on the Write button
23. Goto the Mobile IP sub tab.
24. Click on Read button.
25. Right click on the first Profile radio button (that's Profile 0), and enable it.
26 Click on the Write button
27. On the Selected Profile settings section:
NAI: use the sprint NAI you saved to your text file
Home address: 0.0.0.0
Prim HA address: 68.28.15.12
Sec HA address: 68.28.31.12
AAA Shared Secret: enter your 32 digit sprint HEX AAA password you saved in your text file (put check mark on "Enter value in HEX")
HA Shared Secret: the word secret (remove check mark on "Enter value in HEX"
28. Click on Write current profile settings.
this next boost section may not be necessary however this is how I did mine and it worked well so you decide if you want to put in the boost stuff
left Click on the second profile button
On the Selected Profile settings section:
NAI: use the Boost NAI you saved to your text file
Home address: 0.0.0.0
Prim HA address: 255.255.255.255
Sec HA address: 68.28.89.76
AAA Shared Secret: enter your 12 digit sboost HEX AAA password you saved in your text file (put check mark on "Enter value in HEX")
HA Shared Secret: the word secret (remove check mark on "Enter value in HEX"
29. Click on Write current profile settings.
30. Reboot the phone. Then run the Update Profile and Update PRL on your Galaxy S3.
31. go to phone dialer ##3282# then edit and put in your 6 digit SPC/MSL code go to others amd mmsc URL change it to h t t p mm. myboos tmobile . com"
My nv files 456 466 1152 and 1154 are in this format
1192 (0x04A8)
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX and there are 8 lines like that
As for the mms i dont have a boost .xml file to use and couldnt find one in any forum
Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator
J_apa_n said:
first, which doner are you using?
the HA key is "secret" without the quotes
1192 is where you'll find the AAA key, it should be the 10 digits after the 0's
all you need is your user name & that should fix your 3g.
for MMS
replace the apn-config.xml file in
root/system/etc
reboot into recovery & fix permissions
remember to do this EVERYTIME you flash a new rom
reboot system
then ##DATA#
edit
enter your msl
other
then lte apn
& select the new apn file
also, dont forget to fix the mmsc url
Click to expand...
Click to collapse
Hi. I'm having a problem getting my Spring GS3's 3g and MMS to work.
I used a guide to change the MEID to that of an old Boost HTC Design.
I flashed CM10 on the phone, but was having some signal issues.
After flashing to Wicked Sensations I couldn't connect to the network until I used ##72786#. Now voice and texts work, but I can only get 1x data and I can't edit the APNs.
I use Google Gesture search to get into APN settings, but all the options in the Edit Access Point screen are grayed out and it won't let me edit anything.
This is my first flashing job and I have been searching for days trying to solve this issue. Any help will be greatly appreciated.
I think what you said about the user name might help me, but I don't know where to go to change that or what to change it to.
I'm currently on Wicked Sensations if that helps at all.
Thanks!
Edit: Here's the link to the guide I used: http: dashdash z4cellforums dot webs dot com/apps/forums/topics/show/8667356
U get mms to work yet if not I'll help u pm me
Sent from my SPH-L900 using Tapatalk 2