Develop Bugs

How to Unlock Vogue CDMA

Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell
I m read another Indian forum. HTC 6800/6900 convert to tata CDMA
here is detail
SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000
I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA
Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA
Everybody now Welcome to World of Tata Indicom
( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )
Pls Help me

Sounds interesting but I'm just wondering
OK.... can u explore more on that.
How does one go about creating/editing the PRL settings contained here if they want to use this thing on a different network than Tata?
thx

This method work on Cricket in USA and in TATA in India
Just follow the Process and Activate using *228 Loading TATA Prl is needed or else it will not catch TATA Tower range.
Go on and take it into TATA
I already have activated so many Phones
Both Cricket and TATA accept non Allocated ESN and Activate the OTA and INsert the new ESN against users Services, Here in India Reliance dont activate any phone which ESN is not pre Registered in Reliance Network

I was wondering if this will solve my issue. I have bought a touch with a bad ESN and is unable to put it on my account. Will this clear the ESN?

I used this ..so easy

so if you activated your phone for india service, would you be able to use it in the United States?
--James

I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.

dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no carriers.
Good luck.
Click to expand...
Click to collapse
are u then able to have both NAM1 & NAM2 on the phone?

NAM
You have to enable dual NAMs through the registry. And use QPST or CDMA Workshop to set them up.

Thanks a million time to Shadomite
He had Cracked and changed the ESN
I have POsted the Simplified Method Just have a look
http://www.mobile-files.com/forum/showpost.php?p=355534&postcount=82

Quick question. Is there any chance of doing something similar to a Verizon World Edition Blackberry? I live in Ghana and i have had a few of these on my table in the last few months. Any ideas?

''Originally Posted by dharvey4651''
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.''
What information i need from my carrier to build my own rom and how can i make it. Is there a way to build a rom and make a CDMA phone to work in Europe?
I have an HTC TOUCH CDMA ver in Greece!
Help..

Having HTC P3050
you have given the file i have downloaded it but now how to use it and activate on tata can u help me

Need English Viva ROM for Vogue (MP6900SP)
Thank you for this great post. I followed the instructions without bricking my phone. I looked at the 'simpler' one linked to here, but found the one on this thread much easier to follow and use.
Now all I need is the ROM for Viva (North America or Carribbean). Where can I find this? Thanks,
WMT

Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks

puneet_july30 said:
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
Click to expand...
Click to collapse
Mobile-Files was taken down a few months ago.

dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
Click to expand...
Click to collapse
Thanks a ton, I have completed all the steps 30, now how can I run the other network on my phone.
Do I have fill all the network details in the QPST Config step..???

that's great thank you man

Thank you. it was more then easy.
Now it works.

help me
How can I use this file for my HTC Hero CDMA? this QCN file giving error.
help me.

Long road almost there, error 67 :( calls & text ) but no data :( [evo on boost]

Long road almost there, error 67 :( calls & text ) but no data :( [evo on boost]
THE GOOD AND BAD NEWS... THE GOOD NEWS FIRST! i got my evo4g over to boost mobile with my boost account i already had open i can outgoing text and recieve text (no mms right now) i can call out and get calls in, works great shows my boost cell phone number on my evo and everything..
NOW THE PROBLEM...
my DATA doesn't work at all... i get the error 67
I TRIED THESE INSTRUCTIONS AFTER SEEING MY DATA DIDNT WORK..
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If data is not working move on to the next steps...
(Note: These are steps not verified by me as I still dont have neither 1x nor Evdo working but some people say 1 or 2 or all of these following steps combined worked for them, so i guess it depends on the network you are trying to get on)
1. First attempt to update your profile if it can or update PRL
Menu>Settings>About Phone>System Updates>Update Profile
Reboot and see if data works....
2. If still no Data, plug in your Hero to the computer, dial ##3424#, go to QPST folder and open QPST Configuration app.
Under the Ports Tab if the active COM port your phone is on is not in that list Click Add Port and add it.
Then go to Active Phones Tab, select the phone and then go to Start Clients>Service Programming
A new window opens, hit ok, then click Read From Phone on the bottom left, its gonna ask you for your MSL type it in
Then go to the M.IP Tab and under user profiles click on profile 0, click edit, and then deselect Profile Enabled, hit ok, then click Write to Phone.
Close the program unplug your hero, reboot it, and try your data again.
3. If still no data, plug in your old phone to the computer, open up QXDM
check Connections and make sure your COM port is being read.
Go to View>New>Common>NV Browser , in the Category Filter drop down menu, filter only Data
Then scroll down to ID numbers 1192 and 1194
Click read and copy down all the values in there until u reach 0x00
Then unplug your old phone and plug in your hero, dial in ##3424# and go to NV Browser
navigate to the same ID numbers 1192 and 1194, (just to be safe copy all the values here so you can revert back to the originals)
Then double click each value under the input column and it becomes changeable and change all the values to the ones from your old phone and hit write
Close QXDM unplug and reboot your hero, test Data again
4. If still no data, plug in your old phone to the computer, open up QXDM
check Connections and make sure your COM port is being read.
Go to View>New>Common>NV Browser , in the Category Filter drop down menu, filter only Data
Then scroll down to ID numbers 465 and 466
Click read and copy down all the values in there until u reach 0x00
Then unplug your old phone and plug in your hero, dial in ##3424# and go to NV Browser
navigate to the same ID numbers 465 and 466, (just to be safe copy all the values here so you can revert back to the originals)
Then double click each value under the input column and it becomes changeable and change all the values to the ones from your old phone and hit write
Close QXDM unplug and reboot your hero, test Data again
NONE OF IT WORKED.... SO I WENT TO THE SECOND SET OF INSTRUCTIONS.
Run the QPST config and plug in your phone, make sure your phone is detected in the COM port list. If not click Add New Port and add the one that it has detected your phone on. What it says may vary but USB will often be in the description.
Run QXDM click Options -> Communications and set the Target Port for the same one QPST config listed for your phone.
In the command box at the top type "spc 000000"
Note: If your SPC is not 000000 then you need to use the correct number instead!
If successful you will see a window titled "Command Output" that will output some text with the final line reading "SPC Result = Correct"
Next in the command box type "requestnvitemread ds_mip_ss_user_prof"
This will get you a lot of stuff in the Command Output window. It will start with the "DIAG TX item" section, ignore this one, we are interested in the "DIAG RX item" part.
The actual keys are 16 lines and marked in the output as 0-15. You will notice that quite handily both HA and AAA are both there. Take the part after the "0x" and that is actual key data. Just write down (or use word, notepad, whatever) to record this for safe keeping.
If you are doing this right then you have a long string of 30 characters all strung together for each key. DOUBLE CHECK YOUR COPYING! A single mistake will cause this to fail.
Putting the keys back into the phone:
Load QPST service programming, go to the M.IP tab. Double click profile 0 (in the white box) and use "Enter hex value" to enter your backups of your HA and AAA keys.
Write to phone.
Soft reset. (may not be required but I do it for good measure)
do "requestnvitemread ds_mip_ss_user_prof" for the sprint info and "requestnvitemread ds_mip_ss_user_prof 1" for the boost info
I'm telling you.. If you're getting the error 67, the following these steps above will fix it.. I'm on the Sprint network and the problem i was having was, in "Profile 0" The username which began with A000000 (this is actually your ESN #) Was from the original phone, not the donar phone... So i took the battery out the donor phone and looked at the ESN (not DEC) and began to type A00000 etc.
Then i used the steps above to get AAA Shared Secret from the Donor phone.. My AAA Shared Secret was 32 Alpha numeric characters...
i did that and still no dice.... i got the AAA key and the HA key .. both were 32 characters...
i even went as far as to get the profile info from the incognito phone, for profile 0 and 1, and made it exactly the same on my evo and addresses for the HA and alternate HA ADDRESS... still no dice.. i went into debug mode on my evo and even hit the restore to start fresh , and let it download the data via the servers... still didnt work...
i even re-entered the profile info and etc, for profile 0 and 1, and still not working
i know im close i just need to finish the puzzle please help.
oh yea, and when i go into debug mode it shows the authentication as failed.. i dont know how thats even possible I've triple checked the HA AND AAA keys via QXDM and they are the correct keys from the incognito boost phone.

Epic 4G, Data Not Working Boost

I Know There Are Lots Of How To's On This But I Follow The Steps And I Just Cant Get It To Work Properly. Iv'e Done The Voice & Text Correctly. But The Data Just Doesn't Work
Im Using My Epic 4G 2.2.1
&
As The Donor Phone Im Using A Samsung Rant (Boostmobile)
If You Have Possible Help Please Post

I Guess The 1192 1194 NV items Don't Read Correctly From The Rant, Because When I Try To Write Them To The Epic, It Says 0 Nv Item Successfully Copied :/

Results For 1192:
[NV Items]
[Complete items - 0]
1192 (0x04A8) - Access denied
Results For 1194:
[NV Items]
[Complete items - 0]
1194 (0x04AA) - Inactive item
Seems As If It Is Still Locked Or Something Like That. It Shouldn't Be, If I Entered The SPC Correctly

the rant is known as a bad phone to get that info from...

I have gotten this to work using DFS cdmatool. this is the only program i found that can easily show the ha aaa passwords correctly. you can use the demo for this to work. DO NOT edit the ha and aaa passwords with this tool - only use it to see them.
1. connect your donor phone and open dfs.
2. click manager in the top left
3. double click on your phone
4. type in your spc and click the button directly to the left
5. navigate to the programming->mobile ip tab
6. click read
this will enable you to see exactly what your passwords are. copy these values or use print screen to save the images. make sure you get the passwords for prof 0 and prof 1. close dfs.
7. disconnect your donor and connect to your epic using qpst.
8. click read and enter your spc/msl.
9. navigate to the m.ip tab and double click prof 0
you will now click the "enter hex value" circles which will enable you to enter the ha and aaa passwords from your donor. it is CRITICAL that you click these circles even if one of your donor passwords came back blank in dfs as this will write it blank. then click ok and change the passwords for prof 1. now click write to phone.
10. unplug usb. reboot phone.
i hope this helps

Did you by any chance follow re-Odin your phone with "Phone EFS Clear" checked?

[Q] My cspire r800x(cdma) thinks its a Verizon phone.

Earlier today I had a successful attempt at installing FXP's CM9 126 build. As a requirement I had to flash the R800x_4.0.2.E.57_Verizon.ftf via Flashtool to my phone before I could flash the Rom. My phone's provider is Cspire(formally Cellular South), and after the ftf my phone is trying to make contact with Verizon for activation, leaving my unable to call or text on my own provider. I've tried flashing a nand backup I had of one of Codename Andriod that I created when everything was working perfectly, but it didn't fix the problem.
Thank you for your time and please let me know what I can to fix this.
Sincerely,
Frag_Bag

Frag_Bag said:
Earlier today I had a successful attempt at installing FXP's CM9 126 build. As a requirement I had to flash the R800x_4.0.2.E.57_Verizon.ftf via Flashtool to my phone before I could flash the Rom. My phone's provider is Cspire(formally Cellular South), and after the ftf my phone is trying to make contact with Verizon for activation, leaving my unable to call or text on my own provider. I've tried flashing a nand backup I had of one of Codename Andriod that I created when everything was working perfectly, but it didn't fix the problem.
Thank you for your time and please let me know what I can to fix this.
Sincerely,
Frag_Bag
Click to expand...
Click to collapse
You'll need to change the build.prop and apn settings. Found this from a quick search with someone that has a working verizon build.prop that is said to work on cspire
https://www.dropbox.com/s/dgteu3ziweifix8/build.prop
and his working apn settings:
https://www.dropbox.com/s/6cs5tqwdlcstt3s/apns-conf.xml
Also found this:
You could push the apn with ADB but i just edited mine with root explorer in /System/etc and restarted the phone.
As for CDMA Workshop is a service software for CDMA phones it is used for flashing phones to different carriers to put it plain as possible in my mind but it can be used for countless useful tasks, just Google it to read more. But the below method was much easier.
Dialing ##7764726(##program) is used to manually program your phone.
After dialing ##7764726 press call it will prompt for a SPC password it should be 000000
Then click User Activation
MIN1 I put the last 7 digits of my phone number.
MIN2 put the first three of phone number(area code).
MDN is your 10 digit phone number.
CDMA Sys ID put 1996
IMSI_11_12 put 12
Then hit back and click on SID/NID Pairs:
SID_1: put 1996
NID_1: put 65535
After this hit back till you exit all the way back out of the menu the phone will reboot after it reboots i dialed *22801 it didn't say anything just sat at the activation screen for about 30sec. Then it said reprogramming the phone then rebooted agin after that i was back on C spire.
Links are a little old but this is all I could find:
SID Database if you need to find a different carrier
http://www.the-answerman.com/sidlist/index.asp
Also the SID/NID I used was found in this PRL breakdown:
http://www.howardforums.com/showthread.php/1700374-New-PRL-60575-50575
The Second post of the page explains a lot more about PRL and SID/NID just good to understand what your kinda messing with:
http://forum.xda-developers.com/showthread.php?p=19537266
Also i don't know if this is the best way to accomplish this task but it took me awhile to figure out this fix it worked for me but i can't guarantee anything also im not responsible if something goes wrong and you brick(its always possible) but i am willing to help to the best of my abilities
Good Luck and sorry for such a long post.

agraceful said:
You'll need to change the build.prop and apn settings. Found this from a quick search with someone that has a working verizon build.prop that is said to work on cspire
https://www.dropbox.com/s/dgteu3ziweifix8/build.prop
and his working apn settings:
https://www.dropbox.com/s/6cs5tqwdlcstt3s/apns-conf.xml
Also found this:
You could push the apn with ADB but i just edited mine with root explorer in /System/etc and restarted the phone.
As for CDMA Workshop is a service software for CDMA phones it is used for flashing phones to different carriers to put it plain as possible in my mind but it can be used for countless useful tasks, just Google it to read more. But the below method was much easier.
Dialing ##7764726(##program) is used to manually program your phone.
After dialing ##7764726 press call it will prompt for a SPC password it should be 000000
Then click User Activation
MIN1 I put the last 7 digits of my phone number.
MIN2 put the first three of phone number(area code).
MDN is your 10 digit phone number.
CDMA Sys ID put 1996
IMSI_11_12 put 12
Then hit back and click on SID/NID Pairs:
SID_1: put 1996
NID_1: put 65535
After this hit back till you exit all the way back out of the menu the phone will reboot after it reboots i dialed *22801 it didn't say anything just sat at the activation screen for about 30sec. Then it said reprogramming the phone then rebooted agin after that i was back on C spire.
Links are a little old but this is all I could find:
SID Database if you need to find a different carrier
http://www.the-answerman.com/sidlist/index.asp
Also the SID/NID I used was found in this PRL breakdown:
http://www.howardforums.com/showthread.php/1700374-New-PRL-60575-50575
The Second post of the page explains a lot more about PRL and SID/NID just good to understand what your kinda messing with:
http://forum.xda-developers.com/showthread.php?p=19537266
Also i don't know if this is the best way to accomplish this task but it took me awhile to figure out this fix it worked for me but i can't guarantee anything also im not responsible if something goes wrong and you brick(its always possible) but i am willing to help to the best of my abilities
Good Luck and sorry for such a long post.
Click to expand...
Click to collapse
I was able to enter all the values for MIN2, MDN, CDMA, and IMSI, but the MIN1 Keeps telling me "Unable to set new parameter, I made sure there was a 1 before my 7 digit number. Thoughts?

Frag_Bag said:
I was able to enter all the values for MIN2, MDN, CDMA, and IMSI, but the MIN1 Keeps telling me "Unable to set new parameter, I made sure there was a 1 before my 7 digit number. Thoughts?
Click to expand...
Click to collapse
I don't think you'll need the 1. Just the last 7 numbers. Try that to see if it works. And just so you know, I'm on verizon so all my answers are coming from google at the moment lol

I left the number the way it was and finished the steps, everything is working as it should and I can call and text. Thank you very much. Now i just have to find a fix for Mobile data. I really do appreciate it.

Frag_Bag said:
I left the number the way it was and finished the steps, everything is working as it should and I can call and text. Thank you very much. Now i just have to find a fix for Mobile data. I really do appreciate it.
Click to expand...
Click to collapse
Mobile data would be in the build.prop and the apn settings, You should be able to use pieces from the build.prop I posted to work whatever rom you're on. I got to assume verizon and cspire are close to identical since they're both cdma. Half way there right?

agraceful said:
Mobile data would be in the build.prop and the apn settings, You should be able to use pieces from the build.prop I posted to work whatever rom you're on. I got to assume verizon and cspire are close to identical since they're both cdma. Half way there right?
Click to expand...
Click to collapse
Are these settings still current cspire settings... I lost 3g connectivity and would love to troubleshoot to figure out whats wrong with it... I did the ##Program and here are my settings
USER ACTIVATION MENU
MIN-my number with area code
IMSI_11_12 =23
MDN - my number with area code
CDMA system ID - 1996
EXTENDED NAM MENU
MIN = another local number
TRUE IMSI - 000000000007809
IMSI_11_12 = 23
MDN - my number with area code
CDMA system ID - 1996
Country code - 311
CDMA network - 65535
1st channel A - 283
1st channel B - 384
2nd channel A - 691
2nd channel B - 777
Access overload class 0

URGENT
im having the same issue when i use ##program and dail it does nothing but act like a collect call HELP
on cm9

Thanks...
agraceful said:
You'll need to change the build.prop and apn settings. Found this from a quick search with someone that has a working verizon build.prop that is said to work on cspire
https://www.dropbox.com/s/dgteu3ziweifix8/build.prop
and his working apn settings:
https://www.dropbox.com/s/6cs5tqwdlcstt3s/apns-conf.xml
Also found this:
You could push the apn with ADB but i just edited mine with root explorer in /System/etc and restarted the phone.
As for CDMA Workshop is a service software for CDMA phones it is used for flashing phones to different carriers to put it plain as possible in my mind but it can be used for countless useful tasks, just Google it to read more. But the below method was much easier.
Dialing ##7764726(##program) is used to manually program your phone.
After dialing ##7764726 press call it will prompt for a SPC password it should be 000000
Then click User Activation
MIN1 I put the last 7 digits of my phone number.
MIN2 put the first three of phone number(area code).
MDN is your 10 digit phone number.
CDMA Sys ID put 1996
IMSI_11_12 put 12
Then hit back and click on SID/NID Pairs:
SID_1: put 1996
NID_1: put 65535
After this hit back till you exit all the way back out of the menu the phone will reboot after it reboots i dialed *22801 it didn't say anything just sat at the activation screen for about 30sec. Then it said reprogramming the phone then rebooted agin after that i was back on C spire.
Links are a little old but this is all I could find:
SID Database if you need to find a different carrier
http://www.the-answerman.com/sidlist/index.asp
Also the SID/NID I used was found in this PRL breakdown:
http://www.howardforums.com/showthread.php/1700374-New-PRL-60575-50575
The Second post of the page explains a lot more about PRL and SID/NID just good to understand what your kinda messing with:
http://forum.xda-developers.com/showthread.php?p=19537266
Also i don't know if this is the best way to accomplish this task but it took me awhile to figure out this fix it worked for me but i can't guarantee anything also im not responsible if something goes wrong and you brick(its always possible) but i am willing to help to the best of my abilities
Good Luck and sorry for such a long post.
Click to expand...
Click to collapse
Thanks for copying and pasting all this from my thread you could have atleast acknowledged me since it's basically word for word
http://forum.xda-developers.com/showthread.php?t=1624990

MMS and 3G boost flashed problem

Hi i recently flashed my sprint gs3 to boost on my own and am having some difficulties with the getting the 3g to work and the mss to send. I tried a guide for mms but it wouldnt let me change the first setting described and im not able to link it as im a new member. As for the 3g i bought my donor info off of ebay and I cant figure out how to get the ha and aaa keys from the files i received. They were 5 text files with numbers in titled 465 466 1192 and 1194 also another file i used. Any help at all would be much apprreciated

nigpeen said:
Hi i recently flashed my sprint gs3 to boost on my own and am having some difficulties with the getting the 3g to work and the mss to send. I tried a guide for mms but it wouldnt let me change the first setting described and im not able to link it as im a new member. As for the 3g i bought my donor info off of ebay and I cant figure out how to get the ha and aaa keys from the files i received. They were 5 text files with numbers in titled 465 466 1192 and 1194 also another file i used. Any help at all would be much apprreciated
Click to expand...
Click to collapse
Add the link to the guide you used (put spaces between the different sections)
Like this: www DOT boost guide site DOT com / guide DOT html

CNexus said:
Add the link to the guide you used (put spaces between the different sections)
Like this: www DOT boost guide site DOT com / guide DOT html
Click to expand...
Click to collapse
I got the phone ready and set up an account and then over the air activated and updated the prls and such then rooted it to try this guide for the mms but the first setting it says to change would not change on my phone it just reverted back to the way it was.
http :/ /forums .androidcentral.com/sprint-galaxy-s-iii/203833 -how-get-mms-pictures- samsung-galaxy-s3-flash-boost-mobile.html
As for the 3G It displays the 3G logo but in the settings it says 1xRTT:6 under mobile network type. To get the 3g to work i need to figure out how to get the ha and aaa keys from the donor info i purchased. And again any info would be very much appreciated

first, which doner are you using?
the HA key is "secret" without the quotes
1192 is where you'll find the AAA key, it should be the 10 digits after the 0's
all you need is your user name & that should fix your 3g.
for MMS
replace the apn-config.xml file in
root/system/etc
reboot into recovery & fix permissions
remember to do this EVERYTIME you flash a new rom
reboot system
then ##DATA#
edit
enter your msl
other
then lte apn
& select the new apn file
also, dont forget to fix the mmsc url

J_apa_n said:
first, which doner are you using?
the HA key is "secret" without the quotes
1192 is where you'll find the AAA key, it should be the 10 digits after the 0's
all you need is your user name & that should fix your 3g.
for MMS
replace the apn- config . xml file in
root/system/etc
reboot into recovery & fix permissions
remember to do this EVERYTIME you flash a new rom
reboot system
then ##DATA#
edit
enter your msl
other
then lte apn
& select the new apn file
also, dont forget to fix the mmsc url
Click to expand...
Click to collapse
The donor info ii have is either from an incognito or a rant they didnt specify. The guide im using says to do this "3G working using DFS 4.0.0.4 or 4.0.0.5
14. Click on the ports button and connect to the proper port
put in your SPC code and click on the send spc button
15. Go to the Programming tab.
16 Click on the Data sub tab.
17. Click on Read button.
18. Under PAP:
UID: samsung01 @ sprintpcs dot com
Pwd: samsung
19. Under HDR AN:
NAI: MEID @ hcm.sprintpcs dot com
Pwd: (checked) enter your 32 digit HEX AAA password
20. Under HDR AN Long:
UID: MEID @ hcm.sprintpcs dot com
Pwd: (checked) enter your 32 digit HEX AAA password
21. Put a check mark on "Authentication require password encryption"
22. Click on the Write button
23. Goto the Mobile IP sub tab.
24. Click on Read button.
25. Right click on the first Profile radio button (that's Profile 0), and enable it.
26 Click on the Write button
27. On the Selected Profile settings section:
NAI: use the sprint NAI you saved to your text file
Home address: 0.0.0.0
Prim HA address: 68.28.15.12
Sec HA address: 68.28.31.12
AAA Shared Secret: enter your 32 digit sprint HEX AAA password you saved in your text file (put check mark on "Enter value in HEX")
HA Shared Secret: the word secret (remove check mark on "Enter value in HEX"
28. Click on Write current profile settings.
this next boost section may not be necessary however this is how I did mine and it worked well so you decide if you want to put in the boost stuff
left Click on the second profile button
On the Selected Profile settings section:
NAI: use the Boost NAI you saved to your text file
Home address: 0.0.0.0
Prim HA address: 255.255.255.255
Sec HA address: 68.28.89.76
AAA Shared Secret: enter your 12 digit sboost HEX AAA password you saved in your text file (put check mark on "Enter value in HEX")
HA Shared Secret: the word secret (remove check mark on "Enter value in HEX"
29. Click on Write current profile settings.
30. Reboot the phone. Then run the Update Profile and Update PRL on your Galaxy S3.
31. go to phone dialer ##3282# then edit and put in your 6 digit SPC/MSL code go to others amd mmsc URL change it to h t t p mm. myboos tmobile . com"
My nv files 456 466 1152 and 1154 are in this format
1192 (0x04A8)
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX and there are 8 lines like that
As for the mms i dont have a boost .xml file to use and couldnt find one in any forum

Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator

J_apa_n said:
first, which doner are you using?
the HA key is "secret" without the quotes
1192 is where you'll find the AAA key, it should be the 10 digits after the 0's
all you need is your user name & that should fix your 3g.
for MMS
replace the apn-config.xml file in
root/system/etc
reboot into recovery & fix permissions
remember to do this EVERYTIME you flash a new rom
reboot system
then ##DATA#
edit
enter your msl
other
then lte apn
& select the new apn file
also, dont forget to fix the mmsc url
Click to expand...
Click to collapse
Hi. I'm having a problem getting my Spring GS3's 3g and MMS to work.
I used a guide to change the MEID to that of an old Boost HTC Design.
I flashed CM10 on the phone, but was having some signal issues.
After flashing to Wicked Sensations I couldn't connect to the network until I used ##72786#. Now voice and texts work, but I can only get 1x data and I can't edit the APNs.
I use Google Gesture search to get into APN settings, but all the options in the Edit Access Point screen are grayed out and it won't let me edit anything.
This is my first flashing job and I have been searching for days trying to solve this issue. Any help will be greatly appreciated.
I think what you said about the user name might help me, but I don't know where to go to change that or what to change it to.
I'm currently on Wicked Sensations if that helps at all.
Thanks!
Edit: Here's the link to the guide I used: http: dashdash z4cellforums dot webs dot com/apps/forums/topics/show/8667356

U get mms to work yet if not I'll help u pm me
Sent from my SPH-L900 using Tapatalk 2