I wanna make another post here cause in the last post this issue wasnt resolved and i wanna fresh thread here, please only post if you have the solution, thanks hope theres someOne who can get this issue resolved.
Do you use AutoKeylock ?
I had this problem when I started using 6.1 ROMs first.
In my case I had about 6 applications I always installed right off the bat after a new ROM flash. One of those was Maniac's AutoKeylock.
I timed the duration between answering a call and having the call go white one day, and it seemed to me to match precisely with the screen timeout settings I had in AutoKeylock.
I removed the application, and have never seen the problem happen again.
However, I do miss having AutoKeylock.
I realize that this could be totally coincidental, and thus I asked before whether others who had the problem also used AutoKeylock but never got a reply.
Perhaps you can reply as to whether you use it or not. And, if you do, whether removing the application resolves the issue for you.
If there is a correlation then we can alert Maniac to the issue, and he may be able to find a solution.
LiverpoolFCfan said:
I had this problem when I started using 6.1 ROMs first.
In my case I had about 6 applications I always installed right off the bat after a new ROM flash. One of those was Maniac's AutoKeylock.
I timed the duration between answering a call and having the call go white one day, and it seemed to me to match precisely with the screen timeout settings I had in AutoKeylock.
I removed the application, and have never seen the problem happen again.
However, I do miss having AutoKeylock.
I realize that this could be totally coincidental, and thus I asked before whether others who had the problem also used AutoKeylock but never got a reply.
Perhaps you can reply as to whether you use it or not. And, if you do, whether removing the application resolves the issue for you.
If there is a correlation then we can alert Maniac to the issue, and he may be able to find a solution.
Click to expand...
Click to collapse
You know if the reason you miss autokeylock is for the ability to set a time for the screen to turn off and the keypad to lock, smarttoolkit does that, with no problems.
HTCP4000PPC said:
I wanna make another post here cause in the last post this issue wasnt resolved and i wanna fresh thread here, please only post if you have the solution, thanks hope theres someOne who can get this issue resolved.
Click to expand...
Click to collapse
How often it happen?
With my phone running Kavanas I will get a white screen once after a reboot and then I press and button and it goes back to normal and wont do it again. I have gotten used to it.
For some reason I think it has to do with Tornado PowerControl, do you have that installed? I just cant figure it out exactly. Maybe we can find a solution.
We'll i believe this White screen has something to do with the backlight settings in power managment, i find if you leave screen on full and turn off the phone from turning off the screen, the white screen wont happen, this isnt so bad, cause if u want the screen to go off just hold down the disconnect phone button, not too bad cause when your not wanting to use the phone anymore the screen still goes off, also you can turn the backlight off in accessories which is the same as setting the screen to go off automatically in 5 seconds, white screen fixed moreless.
Same issue with Ricky's v24 and now with Rose 1.7
I also am experiencing this issue, but do not have installed neither Maniac's AutoKeylock nor Tornado PowerControl.
It happens sometimes during a call, sometimes not.
It happens when leaving the phone unlocked and timesout idle time. If hit the Home or back buttons, it shows the home screen again and next timeout does work fine.
I have beeing looking up and down for fixes but was unable to find one. Some say turning off "Run Lowlight" JOGGR setting, some say flash after a hard reset...
It seems that running lowlight (joggrinfo.exe -m -t) helps a bit. If the phone is fully bright and rests on the table, the screen goes white after timeout.
However, if run lowlight and let it alone, it turns off the screen normally.
Also when it goes white and hit back or home button, the screen goes mid-bright, and then turns off normally.
However, when unlocking, it goes full bright, and then the issue comes back.
In summary ...
Full Bright -> Times out to whitescreen.
Mid Bright -> Times out to lights off.
Unlock -> Goes full bright -> Times out to whitescreen.
White screen -> Hit Back/Home button goes mid-bright -> Times out to lights off.
It would be great if lowlight could be run when unlocking the device.
Does it work same way for you guys??
Regards.
This will stop White Screen from happening.
ok this is a way to avoid the white screen issue, (Click on Light Config) then open CeleTask and in CeleTask - Tools use Close Screen this will turn off your screen and allow the backlight from turning on when screen turns back on, also remember u need to set your power settings to (Backlight time out on battery 5 Seconds and Backlight on AC can be 1 minute which u never use) and Display time out Never..)
You can also use CeleTask to disable the screen when you make a call, just open CeleTesk when you hit call.
Topic should be changed as not a fix but work around "sortof":
Process of illimination:
My recomendation would be try a hard-reset, don't install any programs see if that fixes it now when installing programs don't bung them all on install 1 @ a time soft-reset give it while see if problem resumes, do this for all software then you may find the culprit?
This is not an issue faced by all so something has to be the culprit.
Bad Flash?
Software Install?
JOGGR?
Power Settings?
They are just examples.
I had this happen once but on WM6 and a hard-reset was what was needed and didn't pop up again........
HTCP4000PPC said:
ok this is a way to avoid the white screen issue, (Click on Light Config) then open CeleTask and in CeleTask - Tools use Close Screen this will turn off your screen and allow the backlight from turning on when screen turns back on, also remember u need to set your power settings to (Backlight time out on battery 5 Seconds and Backlight on AC can be 1 minute which u never use) and Display time out Never..)
You can also use CeleTask to disable the screen when you make a call, just open CeleTesk when you hit call.
Click to expand...
Click to collapse
These instructions have fixed my device... I got an Elf and I made it my primary phone, and now I´m experiencing new ROM´s in my S621. This problem happens in my device (the S621, of course), and I´m now using NRG remade by Ricky and Stylez, and this problem with the screen seems to be solved with this tip.
This problem does not happen when I use "Kavana remade by Ricky and Stylez" only with NRG and it´s Remake.
Regards
If this isnt helping try just disabling Timeout and set everything else ur way u want.
Related
Has anyone else experienced this problem with their P3300?
Unpredictably, the screen on my P3300 will fail to come back on after I have shut the device off with the power button. I know the device is on because the hardware buttons light up when pressed, but the screen appears almost completely dark and won't come back on when tapped. The only way to get the screen back to normal function is to get to the backlight settings and adjust them. This seems to return the device to normal function...until it randomly happens again. I'm seeing this about two or three times a day.
At first, I thought I needed to soft reset - and this worked - I then just went to the backlight settings to modify them and got back normal function for a while. The strange thing was that after the screen issue and the soft reset, my backlight settings for battery power were on "brightest" - and they wern't there before the issue popped up.
Now I have a WA2 shortcut on my top bar that goes to backlight settings. I know approximately where it is on the screen, so when the issue pops up and the screen is pitch dark, I can tap in that general area and get to backlight settings. The screen is still dark, but I can just make out the backlight slider enough to adjust it from there and avoid the soft reset.
So, basically, it seems as though my backlight settings are randomly resetting themselves to the lowest setting every once in a while after power off. Anybody else with an Artemis seeing this? Seems a little similar to the first of the three questions in this thread, but not exactly the same:
http://forum.xda-developers.com/showthread.php?t=281763
Any help or empathy would be appreciated!
I've had that, too. I assume the program for the allocation of the soft keys has a bug. You had to HARD RESET, and dont change the soft keys any more.
I've read some more about this issue and it seems it is a WM5 bug that is seen across devices. I guess I can hope they will address it at some point in a future ROM release. Thanks for the suggestions anyway.
Check this out for more info:
http://www.sbsh.net/forums/index.php?showtopic=12842
Sleep Mode
What you are describing sounds like sleep mode
" Quickly pressing the POWER button turns off the display temporarily and switches your device to sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power "
Click to expand...
Click to collapse
(Taken from MDAC3 Manual)
Pressing the power button again should bring it out of Sleep Mode. If it is getting stuck then it is possibly a bug affecting the sleep mode.
Hi!
Any news on this issue? My phone is acting just like described in this thread (and no, this is not standby/sleep mode)
PK
This only hapen to me after a soft reset. And the only way i found to "fix" the problem was after every soft reset going to Settings>Backlight move the brightness bar up and down. And after that it never blocks the light again until the next soft reset. Sometimes when connected to usb it blocks too but if you always go to the backlight, befor e the light goes off, and move the bar it wont block anymore...Its not a real solution but the only way i found...
Imaginati0n said:
This only hapen to me after a soft reset. And the only way i found to "fix" the problem was after every soft reset going to Settings>Backlight move the brightness bar up and down. And after that it never blocks the light again until the next soft reset. Sometimes when connected to usb it blocks too but if you always go to the backlight, befor e the light goes off, and move the bar it wont block anymore...Its not a real solution but the only way i found...
Click to expand...
Click to collapse
Yeah, that is all I am doing too. Hopefully HTC is noticing this problem too and a future ROM release will alleviate the problem. Perhaps a Crossbow upgrade someday????
I have the same problem. I found out that it happens when PhoneAlarm switches my profile from work to home.
Solution!
Check this thread out:
http://www.pocketmax.net/smf/index.php?topic=3324.0
As stated above, looks like PhoneAlarm is the culprit. I use it and I would bet that everyone posting in this thread does too. In fact, Bruce from PocketMax has even listed the Artemis Backlight corruption issue as a fixed item in his latest release, v1.57 available here:
http://www.pocketmax.net/phoneAlarm.html
Once you download and install, make sure to go the the backlight % setting in each of your profiles and select "Leave Unchanged". This alleviates the problem. My Artemis no longer goes blank without backlight slider manipulation after a soft reset!!! One less thing to worry about!
I had the same problem ... I try your solution and make a feed back
I too have had this problem and have PA installed - I'll also apply the solution and report findings . . thanks for sharing.
Hi!
I installed the PA 1.57 upgrade, but it did not help... But it seems like the backlight settings on the Artemis device is not standard, so I uninstalled Spb GPSR monitor (who has a backlight setting option), and then the problem disappeared.
PK
Looks like any program you have installed with a backlight setting option needs to be adjusted not to change the backlight settings in order for things to work properly for the time being. I'm sure that software developers will adjust to this new device soon just as PA has. Thanks for the feedback!
hi,
i have PA 1.58 (build 100), and the reminders for missed calls not work properly. the orange led is blinking, but the vibration and the sound are
not played (i have set the alarm reminder to 1 x 5 min x endless)...
please, test and indicate to me if this function works on your artemis...
the reminders for sms works fine.
thank's
Ahqar said:
Pressing the power button again should bring it out of Sleep Mode. If it is getting stuck then it is possibly a bug affecting the sleep mode.
Click to expand...
Click to collapse
In other forums they have this 'problem' too, and all of these people had SPB Pocket Plus installed. My guess is that it is a backlight setting in that program. You can temporarily get the backlight back on by connecting the phone to the pc through ActiveSync, and change the settings accordingly.
Hard- or softresets shouldn't be necessary to solve this.
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
@all
happy new year!
Ok! so i am not alone! a couple of times i did face this situation. the screen doesnt come up, but the device is on, and i am able to see a slight silhoute of the icons, very very light. and i have to do a softreset to get it back on.
bmod said:
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
@all
happy new year!
Click to expand...
Click to collapse
Yep, that´s it! In every app offering different profiles (like PocketZenPhone, PA, etc.) Settings for Backlight (including Minutes to switch off) must be exactly the same in each profile! Maybe <Leave unchanged> will work, too!
bmod said:
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
Click to expand...
Click to collapse
Hey Guys,
We appreciate the posts about Phone Alarm, but if you just read this entire thread before posting you would have seen that this is old news and this issue was resolved in post #9!
Thanks anyway!
Oh, and Happy New Year as well!
hi,
please, tell me if pa reminders for sms and missed calls work fine in your p3300.
i have installed spb pocket plus and pa and the reminders for pa not work now.
please, if this combination works for you, explaine your config settings.
thank's
Hi All,
Does anyone know how to get this working on our beloved HD's? I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
So this seems like the ideal solution - but i can't get it to work!!
I've copied over the file to the windows folder, then soft reset. Changed the registry entry for phoneLockEnable to 1 in HKLM/Software/HTC/Phone but still no joy!
All help would be greatly appreciated.
Regards
DF
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Sorry, i don't have the cab file, i just saw the screenshot and thought 'that's what i need'!!!
Hopefully some bright spark here can help us both (and others probably).
Regards
DF
Beside this transparent canvas, where can I get the orginal canvas?
I am using a offical ROM but I don't see this function!
I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
Click to expand...
Click to collapse
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
take55 said:
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
Click to expand...
Click to collapse
Hi take55,
Yes, i'm aware of the advanced config tweak (also in HD Tweak), and as you correctly state, the screen should/will go blank on call connection (i'm running kwbr's A Touch Of HD 3.3.4 and mine doesn't, even with tweak applied!!).
Unfortunately, when the call ends and you move the phone away from your ear, the screen still stays blank????? I've read somewhere on these forums that it never will work like the iphone (not sure why, as the light sensor should recognise that we've moved the phone away from our ears).
So that is why i'm trying to get this other method to work. What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
It also might be the fact that this was designed for the Diamond (found the cab on the Diamond forums).
Just hoping some genius here might now how to sort this.
I've attached the cab file i've found, give it a try and see if you have the same issue as me.
Regards
DF
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Datafanatic said:
What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
Click to expand...
Click to collapse
It has nothing to do with the BMPs but with the registry setting that the CAB also makes. It sets HKLM\Software\HTC\Phone\PhoneLockEnable to 1, in wich case you'll have to press the power button to unock (no need to soft reset). For the BMP to work the phone/dialer software will have to support it, otherwise it just locks the phone in the usual way: black screen, power button to unlock.
Datafanatic said:
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Click to expand...
Click to collapse
tks but your cab only for the canvas skin only, do not contain the original software (slidable canvas), anyway, tks for your help
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
rubbermonkey123 said:
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
Click to expand...
Click to collapse
Useful info - I found this particularly annoying yesterday during a ouple of calls.
Also discovered Gyrator tries to turn the phone screen and was laggy - which was even more annoying!
Everyone!!!
CHECK THIS OUT - http://forum.xda-developers.com/showthread.php?t=489034
Answer to all our prayers - a screen lock which uses the g-sensor and not the light sensor.
Now, when a call is connected, holding the phone to the ear blacks the screen, but when you bring the phone down (to use the keypad or something), THE SCREEN COMES BACK ON!!!!!!!
Tried and tested on kwbr's A Touch Of HD v3.3.4 (probably the best manila2 ROM out there!)
Regards
DF
More than half the time I take my phone out of it's case in my pocket to check texts or call somebody, it's always on and eating battery. Alot of the time I have the phone in vibrate or silent because I can't have it going off most of the day, and whenever I get any kind of notification the screen comes on (text, alarm, call, ect.), and then the screen ends up staying on because it's constantly being bumped and never has the time to shut itself down.
Is there any way I can make the screen stay off at ALL times (except on an incoming call), and ONLY come on when I press the unlock/power button on the top of the phone?
I have a TMobile TP2 and I'm running the Nov. 19th, Photon Energy ROM. Upgrading to the Nov. 27th version when it's done downloading but I don't think that will fix the problem as I've changed ROMs before. Thanks to any help.
you will find that when in the case it should be off, on taking the phone out of the case (i assume the HTC one that came with the phone?)
the magnet in the case triggers the keyboard sensor which turns the screen on.
otherwise, you can change the display time out in power options under settings.
Cheers
Steve
That's interesting, I've heard about the case doing that but never thought about it. Would you recommend any cheap cases, or is there a specific magnet location I should be careful of? And do you know if there is a way to keep the screen off when I get a text message for example?
There is a way to fix this... it is to disable "Wake on Slide." I have done this and no more problems.
Here is a link to what to do:
http://forum.xda-developers.com/showpost.php?p=2945249&postcount=3
Hope it helps you, as it did me.
Thanks for the reply and I appreciate the help, but I don't really have a problem with the wake on keyboard slide, it seems that if the phone is in my pocket locked, and I get a text message, the screen comes on to notify me that I have a text message. Then, it's usually being bumped around in my pocket and since the touch screen is usable with any object, it will stay on because something will tap it in my pocket. The phone then heats up over time and drains battery. I want to find a way to keep the screen off at all times unless, I either receive a call, or push the power button. Thanks.
illusion of progress said:
Thanks for the reply and I appreciate the help, but I don't really have a problem with the wake on keyboard slide, it seems that if the phone is in my pocket locked, and I get a text message, the screen comes on to notify me that I have a text message. Then, it's usually being bumped around in my pocket and since the touch screen is usable with any object, it will stay on because something will tap it in my pocket. The phone then heats up over time and drains battery. I want to find a way to keep the screen off at all times unless, I either receive a call, or push the power button. Thanks.
Click to expand...
Click to collapse
Try:
go to HKLM\Drivers\BuiltIn\RIL
change DisableSMSWakeUpEvent to 1 (0 will wake up the device)
On my Rhodium, it does not wake up by default. I hear the notification, but my screen remains dark
Or try this cab file ... soft reset after install
Thanks for the .cab, I'm restarting now to see if it fixes the problem. Kind of random, but I might as well ask here before starting a new thread. I started using Mobile Shell instead of TF3D and so far I love it, but when setting a wallpaper, the wallpapers that I would normally use in TF3D, (480x800), it makes me select or crop out part of the photo to use as a background in Mobile Shell. I can't tell if it actually gets blurry (I would think so, because it's stretching the picture), but does anyone know why it wants me to only use a certain portion of the background instead of just setting the entire picture? Thanks,
More than likely, the version of Mobile Shell you have is either not designed for WVGA or there is a setting somewhere in there that allows you to change it and you haven't found it yet.
Am not a expert on mobile Shell, but according to their website, the latest version (3.5) does support WVGA.
Another option is to, if you have Adobe Photo shop or something similar, scale down the entire picture to the size it reccomends.
Otherwise, if you have a version earlier then 3.5, maybe you could upgrade and see if it makes any difference.
Any way to stop this.. I used the registry to stop it from waking up due to my magnetic case.. i have the notifications to make a noise and flash the led... i dont want it to come out of standby to tell me about an upcoming appt (the dismiss/snooze notice) cause i keep pocket running apps or pocket dialing my sense 2.5 front shortcuts!
ANY HELP would be greatly appreciated!
mrwebsmith said:
Any way to stop this.. I used the registry to stop it from waking up due to my magnetic case.. i have the notifications to make a noise and flash the led... i dont want it to come out of standby to tell me about an upcoming appt (the dismiss/snooze notice) cause i keep pocket running apps or pocket dialing my sense 2.5 front shortcuts!
ANY HELP would be greatly appreciated!
Click to expand...
Click to collapse
Try this: Start > Settings > Sounds & Notifications > Notifications > Event: Reminders > uncheck "Display message on screen."
I hope that solves the problem!
thanks! i will try that and get back to you
UPDATE: damn... this doesnt work... for "reminders" in settings/notifications i only have flash light, play sound, and vibrate selected and the screen/phone wakes up/resumes and if it had been in my pocket or whatever i'd be calling people.. any other ideas?
mrwebsmith said:
thanks! i will try that and get back to you
UPDATE: damn... this doesnt work... for "reminders" in settings/notifications i only have flash light, play sound, and vibrate selected and the screen/phone wakes up/resumes and if it had been in my pocket or whatever i'd be calling people.. any other ideas?
Click to expand...
Click to collapse
Sorry about that. I just noticed myself right now that my phone woke up for a reminder.
Hmm... I don't know, but I think you should get a working screenlocker. I use TouchLockPro (now you can use your zoombar as an unlock bar). I set it up so that when the screen wakes, the phone instantly locks.
If you decide to use TouchLockPro, the settings are a little hard to understand (I followed the Settings instructions in the developer's website). If you need help with the settings, or if you want an example of my settings, feel free to PM me.
try this ..
warlock...thanks for that cab.. but it didnt work...at least not for calendar reminders.. i will test it on txt msgs as that would help as well
sumflipnol: thanks.. i guess i will have to look into screen locks.. its just annoying cause im fine with the "screen lock except for power button" behavior of winmo.. but if it could just stay asleep for the reminders (other than the sound/led/vibrate options) it'd be perfect
ill let you know if that locking program works out for me
hold down the end button
locks the screen wont but dial or open apps when the screen wakes up
cirrob said:
locks the screen wont but dial or open apps when the screen wakes up
Click to expand...
Click to collapse
I believe you're referring to the default Windows Mobile SmartLock (auto-lock). I have that on my phone, and it's not very reliable. My phone sometimes wakes up on my desk, and I notice that Sense2.5 is active (SmartLock obviously failed to auto-launch the WM screenlock). From my week-long experience with TouchLockPro, the screen locks immediately without that small lag, and it's very consistent.
There must be a way!
I'd like to ressurrect this thread to see if anyone has any further ideas.
I also prefer to just use the power-button method of putting my phone into standby rather than mess around with screen locks or anything.
I've disabled wake-up-on-SMS. But it still wakes up whenever there's a reminder for an appointment.
Surely there's a way to stop this behaviour!....
It's an open question, so far...
As many of you, I would like to disable the device wake up for reminders. Same as you, I just want the sound and / or light notification for them.
I've been searching WEB, all XDA forum and my phone registry but I haven't found anything useful for reminders, just for SMS.
The same issue has been posted in other places (for example, http://forum.xda-developers.com/showthread.php?t=615633) but there's no final answer yet.
Definitely, lock screen is not enough, because if the device wakes up and the screen turns on, it can keep on for a long time (caused by the screen being pressed because the phone movement inside the pocket) and battery drains very fast.
I have a Tilt 2, so does my Wife and my Father. This is the 3rd HTC device i've had (mogul, diamond). This setting should be pretty easy.
So my Dad is complaining about the screen dimming really quickly, I change the settings to 2 min. seems to work well for a while. Then he tels me it's still doing it. I check his settings and its back to 10 sec. we go through this a couple of more time, I'm thinking he is changing it and doesn't know it.
So we just turn off the dim feature (on battery) Today he says it's still doing it, we check his settings and the dim feature is turned off, still! but i saw it go dim after 7-10 secs.
Any ideas? Am i missing a setting, i have done mine and my wifes with no problems.
does he have his backlight on auto adjust?
drearg said:
does he have his backlight on auto adjust?
Click to expand...
Click to collapse
Probably, but i have never see such a dramatic change with the auto adjust. it doesn't seem to matter how much light there is. and it's consistantly 7 to 10 seconds.
I tried the at&t "chat" help, they were worthless.
maybe try turning it off. maybe need to do a soft reset on the side of phone.
we turned it off (unchecked it) but it still dims the backlight, never seen anything like it, i will try the soft reset tomorrow. hopefully that will work!
I had the same issue...
I created a reg file to manually fix. What is happening is when the device wakes up from screen sleep or changing from external to battery power, WM6.1 changes this key:
HKEY_CURRENT_USER\ControlPanel\BackLight\BatteryTimeout to 8 (seconds in hex).
I used my reg file and added to my start menu (you could also assing to a hardware button if you have the right tools), and run it when the device sets it to 8 seconds. Its a couple of clicks, but less then navigating to the UI settings.
The reg file is set for 2 minutes. Edit as you wish, but keep in mind you need to convert the seconds to hex.
Send it Back!!
The AT&T folks said to send it back (its still within the 30 days) Dad also told me that the speaker sounds funny, i really didn't believe him, thought it was just "different" from his old Razor.
So we tried it i used his phone and called him using mine, dang if it didn't sound funny!
So i am on the phone getting another sent!!
Thanks for helping!