Develop Bugs

Why always today screen after suspend mode?

Hi folks,
a quick question: since I am using WM6 my tytn always displays the today screen after comming from the suspend mode or blanc screen. This was definitly not the behaviour it did with WM5. An example:
When I'm listening to music with the built in Windows Media Player I like to turn off the screen (using the built in blanc screen function) to save battery. When I switch on the device again to change music or something the device always displays the today sceeen instead of the media player application and I have to switch back to the media player window manually. That drives me crazy as it is not the way it behaved using WM5.
Is there any possibility to change this behaviour in the way, that WM6 shows the last used application instead of the today screen when resuming from suspend mode or blanc screen?
Thank you!

Check you Today settings.
Go to Start>Settings>Today>Items tab and investigate the "Today Timeout" setting.

Timtown said:
Go to Start>Settings>Today>Items tab and investigate the "Today Timeout" setting.
Click to expand...
Click to collapse
I checked this already. The described problem is not related to the Today timeout setting. It appears every time, after a few seconds blanc screen anyway. Try it, you'll see.

i have also experianced this, is really annoying, anyone have any ideas how to resolve it...?

r3d3 said:
Hi folks,
a quick question: since I am using WM6 my tytn always displays the today screen after comming from the suspend mode or blanc screen. This was definitly not the behaviour it did with WM5.
Thank you!
Click to expand...
Click to collapse
Hi!
The best prgm I used for this reason is PPcsoft psShutXP u can have it on tray and u gona have 3 alt. Light Off Shut Down and Soft Reset strike on Light Off it works fine

I like this "feature". Problem I have is if I leave outlook open, I don't get a LED notification of new mail. At some point I had a ROM installed that always went back to the today screen and seem to resolve my issue. Is this something that can be changed in the registry?
Cal

nobody knows anything about that? Can't believe that there are not more people out there, who suffer from this issue

r3d3 said:
nobody knows anything about that? Can't believe that there are not more people out there, who suffer from this issue
Click to expand...
Click to collapse
Hi!
I think if u try the program I mentioned at #5 u gona like it. Here is the link
http://ppcsoft.narod.ru/english/

same problem here...

BatteryStatus
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.

lonwas said:
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
Click to expand...
Click to collapse
I do not use BatterySTatus but I'll try it for solving my issue

Abo Forat said:
Hi!
I think if u try the program I mentioned at #5 u gona like it. Here is the link
http://ppcsoft.narod.ru/english/
Click to expand...
Click to collapse
Thanks for sharing the link but I think, this will not solve the problem for me: as far as I can see you have to go to the today screen anyway to reach the buttons this tool provides. So I haven't got anything....

Great stuff! Batterystatus really solved the problem...just set the tool to not show today screen and it works. Thanks for the hint!
(though I really don't understand that MS doesn't support this feature?!)

Hi, its not that MS doesn't support it, its that its enabled on some roms, and others not, mine always returns to whatever app it was on, after suspend, If you wanted to help figure out the cause, I suggest you install sktracker, and do a before and after the battery status install, and see what key that option in battery status is changing, I don't much care for battery status myself.

Start > Settings > Today > Items Tab
UNCHECK the Today Timeout
Today Timeout means that if the device is left unchecked for say, the Default "4 Hours" than after 4 hours, no matter what program window was running, it defaults back to the today screen when the device is reawakened
pssibly a bug in your OS or some program you are running makes it so every time you turn it back on
but uncheck that and maybe youll have some luck??
i had a similar problem with my iPaq hx4700 where if i was at the today screen, it would keep flickering, refreshing it every 1 second
i disabled the today timeout, and viola, its worked fine since

I have this issue too.
lonwas said:
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
Click to expand...
Click to collapse
Unrelated. I have BS installed and that option is NOT checked, yet it still does it.

This is very annoying, I like mine to sleep after 2 mins (to save power and lock the keyboard). then back to the today screen and have to switch to what I was doing..

Related to the Lock setting?
I have the same problem, and I think it is related to the lock settings. When I enable a simple PIN, my phone always returns to the Today screen after leaving suspend, regardless of the settings in the Today aplet.
If I disable the simple pin in the Lock settings applet, the pone returns to the last used application (unless the today timeout has been exceeded, as one would expect).
Hopefully that will help someone discover a fix. This problem did not occur in WM 5.

pgray007 said:
I have the same problem, and I think it is related to the lock settings. When I enable a simple PIN, my phone always returns to the Today screen after leaving suspend, regardless of the settings in the Today aplet.
If I disable the simple pin in the Lock settings applet, the pone returns to the last used application (unless the today timeout has been exceeded, as one would expect).
Hopefully that will help someone discover a fix. This problem did not occur in WM 5.
Click to expand...
Click to collapse
Hey, you are absolutely right. The problem won't be fixed by Batterystatus. I just mad a hardreset and didn't set a password, so I thought batterystatus fixed it.
It is a bug with the built in password function. So, is there anybody out there, who is able to fix that?

As said before, the Today showing after power-on the device is "another" problem caused by the WM6 Password Lock System. It's necessary to disable the password that locks the device to fix it.
And it's not the only problem. Be warned, don't try this at home!!!; if you got a password active and then you change the Owner Name without changing the password, you will find after the next reboot that your machine is unreachable because the password isn't recognized at all.
Incredible but true!

Screen going White on Kavana 6.1 Work Around (edited)

I wanna make another post here cause in the last post this issue wasnt resolved and i wanna fresh thread here, please only post if you have the solution, thanks hope theres someOne who can get this issue resolved.

Do you use AutoKeylock ?
I had this problem when I started using 6.1 ROMs first.
In my case I had about 6 applications I always installed right off the bat after a new ROM flash. One of those was Maniac's AutoKeylock.
I timed the duration between answering a call and having the call go white one day, and it seemed to me to match precisely with the screen timeout settings I had in AutoKeylock.
I removed the application, and have never seen the problem happen again.
However, I do miss having AutoKeylock.
I realize that this could be totally coincidental, and thus I asked before whether others who had the problem also used AutoKeylock but never got a reply.
Perhaps you can reply as to whether you use it or not. And, if you do, whether removing the application resolves the issue for you.
If there is a correlation then we can alert Maniac to the issue, and he may be able to find a solution.

LiverpoolFCfan said:
I had this problem when I started using 6.1 ROMs first.
In my case I had about 6 applications I always installed right off the bat after a new ROM flash. One of those was Maniac's AutoKeylock.
I timed the duration between answering a call and having the call go white one day, and it seemed to me to match precisely with the screen timeout settings I had in AutoKeylock.
I removed the application, and have never seen the problem happen again.
However, I do miss having AutoKeylock.
I realize that this could be totally coincidental, and thus I asked before whether others who had the problem also used AutoKeylock but never got a reply.
Perhaps you can reply as to whether you use it or not. And, if you do, whether removing the application resolves the issue for you.
If there is a correlation then we can alert Maniac to the issue, and he may be able to find a solution.
Click to expand...
Click to collapse
You know if the reason you miss autokeylock is for the ability to set a time for the screen to turn off and the keypad to lock, smarttoolkit does that, with no problems.

HTCP4000PPC said:
I wanna make another post here cause in the last post this issue wasnt resolved and i wanna fresh thread here, please only post if you have the solution, thanks hope theres someOne who can get this issue resolved.
Click to expand...
Click to collapse
How often it happen?
With my phone running Kavanas I will get a white screen once after a reboot and then I press and button and it goes back to normal and wont do it again. I have gotten used to it.
For some reason I think it has to do with Tornado PowerControl, do you have that installed? I just cant figure it out exactly. Maybe we can find a solution.

We'll i believe this White screen has something to do with the backlight settings in power managment, i find if you leave screen on full and turn off the phone from turning off the screen, the white screen wont happen, this isnt so bad, cause if u want the screen to go off just hold down the disconnect phone button, not too bad cause when your not wanting to use the phone anymore the screen still goes off, also you can turn the backlight off in accessories which is the same as setting the screen to go off automatically in 5 seconds, white screen fixed moreless.

Same issue with Ricky's v24 and now with Rose 1.7
I also am experiencing this issue, but do not have installed neither Maniac's AutoKeylock nor Tornado PowerControl.
It happens sometimes during a call, sometimes not.
It happens when leaving the phone unlocked and timesout idle time. If hit the Home or back buttons, it shows the home screen again and next timeout does work fine.
I have beeing looking up and down for fixes but was unable to find one. Some say turning off "Run Lowlight" JOGGR setting, some say flash after a hard reset...
It seems that running lowlight (joggrinfo.exe -m -t) helps a bit. If the phone is fully bright and rests on the table, the screen goes white after timeout.
However, if run lowlight and let it alone, it turns off the screen normally.
Also when it goes white and hit back or home button, the screen goes mid-bright, and then turns off normally.
However, when unlocking, it goes full bright, and then the issue comes back.
In summary ...
Full Bright -> Times out to whitescreen.
Mid Bright -> Times out to lights off.
Unlock -> Goes full bright -> Times out to whitescreen.
White screen -> Hit Back/Home button goes mid-bright -> Times out to lights off.
It would be great if lowlight could be run when unlocking the device.
Does it work same way for you guys??
Regards.

This will stop White Screen from happening.
ok this is a way to avoid the white screen issue, (Click on Light Config) then open CeleTask and in CeleTask - Tools use Close Screen this will turn off your screen and allow the backlight from turning on when screen turns back on, also remember u need to set your power settings to (Backlight time out on battery 5 Seconds and Backlight on AC can be 1 minute which u never use) and Display time out Never..)
You can also use CeleTask to disable the screen when you make a call, just open CeleTesk when you hit call.

Topic should be changed as not a fix but work around "sortof":
Process of illimination:
My recomendation would be try a hard-reset, don't install any programs see if that fixes it now when installing programs don't bung them all on install 1 @ a time soft-reset give it while see if problem resumes, do this for all software then you may find the culprit?
This is not an issue faced by all so something has to be the culprit.
Bad Flash?
Software Install?
JOGGR?
Power Settings?
They are just examples.
I had this happen once but on WM6 and a hard-reset was what was needed and didn't pop up again........

HTCP4000PPC said:
ok this is a way to avoid the white screen issue, (Click on Light Config) then open CeleTask and in CeleTask - Tools use Close Screen this will turn off your screen and allow the backlight from turning on when screen turns back on, also remember u need to set your power settings to (Backlight time out on battery 5 Seconds and Backlight on AC can be 1 minute which u never use) and Display time out Never..)
You can also use CeleTask to disable the screen when you make a call, just open CeleTesk when you hit call.
Click to expand...
Click to collapse
These instructions have fixed my device... I got an Elf and I made it my primary phone, and now I´m experiencing new ROM´s in my S621. This problem happens in my device (the S621, of course), and I´m now using NRG remade by Ricky and Stylez, and this problem with the screen seems to be solved with this tip.
This problem does not happen when I use "Kavana remade by Ricky and Stylez" only with NRG and it´s Remake.
Regards

If this isnt helping try just disabling Timeout and set everything else ur way u want.

Screen Dims (changing settings doesn't help)

I have a Tilt 2, so does my Wife and my Father. This is the 3rd HTC device i've had (mogul, diamond). This setting should be pretty easy.
So my Dad is complaining about the screen dimming really quickly, I change the settings to 2 min. seems to work well for a while. Then he tels me it's still doing it. I check his settings and its back to 10 sec. we go through this a couple of more time, I'm thinking he is changing it and doesn't know it.
So we just turn off the dim feature (on battery) Today he says it's still doing it, we check his settings and the dim feature is turned off, still! but i saw it go dim after 7-10 secs.
Any ideas? Am i missing a setting, i have done mine and my wifes with no problems.

does he have his backlight on auto adjust?

drearg said:
does he have his backlight on auto adjust?
Click to expand...
Click to collapse
Probably, but i have never see such a dramatic change with the auto adjust. it doesn't seem to matter how much light there is. and it's consistantly 7 to 10 seconds.
I tried the at&t "chat" help, they were worthless.

maybe try turning it off. maybe need to do a soft reset on the side of phone.

we turned it off (unchecked it) but it still dims the backlight, never seen anything like it, i will try the soft reset tomorrow. hopefully that will work!

I had the same issue...
I created a reg file to manually fix. What is happening is when the device wakes up from screen sleep or changing from external to battery power, WM6.1 changes this key:
HKEY_CURRENT_USER\ControlPanel\BackLight\BatteryTimeout to 8 (seconds in hex).
I used my reg file and added to my start menu (you could also assing to a hardware button if you have the right tools), and run it when the device sets it to 8 seconds. Its a couple of clicks, but less then navigating to the UI settings.
The reg file is set for 2 minutes. Edit as you wish, but keep in mind you need to convert the seconds to hex.

Send it Back!!
The AT&T folks said to send it back (its still within the 30 days) Dad also told me that the speaker sounds funny, i really didn't believe him, thought it was just "different" from his old Razor.
So we tried it i used his phone and called him using mine, dang if it didn't sound funny!
So i am on the phone getting another sent!!
Thanks for helping!

[Q] Problem with Screen remaining unlocked

This problem is with the screen and phone not going to sleep mode after an event that brings it out of sleep.
After i lock the screen manually by pressing the button on the top, the phone would wake up briefly due to an event like a calendar reminder, text, phone etc.
So after certain duration of inactivity, it should go back into the sleep mode automatically. Right, it used to, but not anymore. It just stopped. I have checked the Advanced settings under the Battery option but no good.
Although after say 30 seconds (as per my setting) the screen fades to low light to conserve battery, but remains active.
As a result i have inadvertently pocket dialed quite a many and it's beginning to be a privacy concern and a pain in the butt for me and others. Not to mention the charges from the international number my phone self-dialed.
I'm using a TP-2 Rhodium OS 6.1.
As if the battery didn't suck enough, I needed this !!!
Any tips would be appreciated.

If the phone "used to" go to sleep but doesn't anymore, it sounds like a recently installed program or process is running in the background forcing it to stay on.
Does the phone refuse to go to sleep only after being woken up by an event?
...or does it not go to sleep on its own at all anymore?

Isn't pressing that button on the top just closing the screen?, unless you set it as the lock as well

I should have mentioned - the phone will go back to sleep mode if I manually operate the button on the top. Just that it won't go to sleep on its own anymore.
You may be right user602, about the recently installed apps, but is there any way to narrow down on the culprit instead of uninstalling all of them?

s6a6n6d6m6a6n said:
I should have mentioned - the phone will go back to sleep mode if I manually operate the button on the top. Just that it won't go to sleep on its own anymore.
You may be right user602, about the recently installed apps, but is there any way to narrow down on the culprit instead of uninstalling all of them?
Click to expand...
Click to collapse
Go back and check the power settings again; make sure they are set to have the screen turn off. Change the settings to some other value and see if that helps. Maybe something just messed around with your registry entries.
If not, you will need to uninstall those programs, in reverse order, until the device works.

I'd start by changing the power settings as suggested by stevedebi above.
If that doesn't help, and you want to avoid uninstalling a bunch of stuff, you can look at what's running using Task Manager:
-Begin by stopping running programs one at a time, and seeing if the device will sleep.
-If that doesn't help, stop processes one at a time, and again see if the device will sleep (watch out for critical system processes, though).
...or if you're lucky, you may find something in the \windows\startup folder, such as a program you were not aware is starting on boot.
Of course, this all ends with uninstalling programs one at a time if none of the above suggestions work.
-602

------- "I'd start by changing the power settings as suggested by stevedebi above."
I can swear i tried this before and it didn't work. Changed it one last time before doing anything else,... and voila !!!
Thanks 602 & stevedebi

That was easy!
I'm glad the simplest solution worked for you.
...That's usually not my luck!
Cheers,
-602

Fix for Gen8 devices not waking from sleep with dim display

It is my understanding that some gen8 devices aren't waking up from sleep when they go to sleep in a dimmer screen state. Thanks to a diligent XDA user with a 101, I was able to fix this problem.
To fix this, download SuperDim 1.51dev2 from http://code.google.com/p/superdim/downloads/list
Then go to Menu | Options, and check "Fix no-wake-from-sleep". That's all: it should now work.
My testing indicates that low brightness levels aren't enough to switch the backlight from off to on. So what the SuperDim fix option does is that when the device awakes with a low brightness setting, it first sets 22% brightness, which is enough to activate the backlight, and only then sets the desired lower brightness level.
I reported both the bug and the fix to Archos.
It might be possible to make the fix work without root if there is enough demand.

I would very much like to have a fix without having to root my 101!

I installed and to exactly what u introduced but I still have that issue now. Im realy disappointed. Is there any other methods

yes i also tested it - but somehow i didnt see the feature while waking up - but when going to sleep - this somehow is weird and useless - might be the reason for not working for others
Sleep: press power - screen gets brighter -> get darker -> off
Wake up: press power -> wake up by luck
perhaps recontact the develoeper something might be messed up
(i didnt take the version u mentioned - but the latest maket version wich is newer)

So, let me get clearer on what's happening. You have SuperDim installed, and its "fix wake from sleep" option is activated. And you're still not having the device wake from sleep when the screen is dimmed. Right?
If you can install adb on your PC, or install an ssh daemon on your device and connect to the device via ssh from your PC, you can help me diagnose the problem.

Well I hoped my explanation was clear enough - it is what u said + the point that the function u explained in post 1 doesn't happen while waking up but instead when going to sleep...
Device is on (screen is dimmed, archos option is on) -> press power -> screen gets brighter -> screen gets darker -> off
Device is in sleep -> press power -> wake up by luck
Anyway I got ssh woring thought putty(win) and UD ssh daemon.
ADB is also installed on my pc but i nerver used it
EDIT:
hey - btw i asked u for the cycle funktion some time ago and noticed u implemented it now - and a lot of other things
Thanks for that - somehow i lost track of your app since i had exams
Anyway i just noticed i have the turn-on bug also when I don't use your app sometimes... (even when the screen is not dimmed at all) so there must be another problem also i suppose
Regarding the cycle funktion i noticed a "strange" behaviour:
"night 1" -> 3x cycle -> ends in "day 2" (thast right)
but
"night 1" -> 2x cycle -> "night 1" -> cycle -> ends in "day 2" also and not in "night 2" (so it seems u forgot to ask for the current state while cycling though the modes)
anyway I would be glad if u would make a cycle+ and a cycle-

jw3 said:
I would very much like to have a fix without having to root my 101!
Click to expand...
Click to collapse
PM me your email address. I may have a fix for you.

hello.
I have a similar problem with my GEN 8 A43
I am runing Cyanogenmod bull latest VR since yesterday with GO lancher/
and when i wake up my phone it is only making a sound -"bip" like its turned on, but I dont see anything of the screen...
so the only thing I can do is tern off the device by long press on the power key, and turn it on again...
rarely it is working fine and the regular unlock screen show up...
plese help my to fix this.
thank you !

Moko_Loko said:
hello.
I have a similar problem with my GEN 8 A43
I am runing Cyanogenmod bull latest VR since yesterday with GO lancher/
and when i wake up my phone it is only making a sound -"bip" like its turned on, but I dont see anything of the screen...
so the only thing I can do is tern off the device by long press on the power key, and turn it on again...
Click to expand...
Click to collapse
Have you tried SuperDim, now known as RootDim, and its sleep of death fix option?