hardspl type - Touch Diamond, MDA Compact IV ROM Development

i just receive this phone
i only change radio
i can't know is my spl signed or not
i did alot of search and ask members here
but i get confused
once unsigned and once change it to unsigned
plz tell me and tell me how u know it's signed or not
my phone info
security unlock
rom verison:1.37.110.3 wwe
rom update 6/20/08
radio version: 1.0.25.5
diam200 mfg 64m
spl-1.40.olinex
microp-diam (LED)v11
PSOC-vict stage_pvt v0x20

Searching can provide you with the same answer -
From what you show - I can confirm you have Unsigned HardSPL and that you phone has been unlocked (perhaps with stolen software) to use any sim - Hope this helps.

unknown83 said:
i just receive this phone
i only change radio
i can't know is my spl signed or not
i did alot of search and ask members here
but i get confused
once unsigned and once change it to unsigned
plz tell me and tell me how u know it's signed or not
my phone info
security unlock
rom verison:1.37.110.3 wwe
rom update 6/20/08
radio version: 1.0.25.5
diam200 mfg 64m
spl-1.40.olinex
microp-diam (LED)v11
PSOC-vict stage_pvt v0x20
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=482959
unknown, you have to be more subtle/patient. you post the same question in so many threads, you don't even look at the old ones. even within a 2 day span.
@republik
I admire your patience. Answering him 3 times on the same question: this thread, the link above and the link below:
http://forum.xda-developers.com/showthread.php?t=478213
Unknown, what is your mother tongue? It might be easier to find the help you need in that language.

Kevbodian said:
@republik
I admire your patience. Answering him 3 times on the same question:
Click to expand...
Click to collapse
LOL, well spotted
Some people never learn.

Related

[SOLVED] Touch Diamond Help - No Network after hard reset

Hi all,
I have been using this phone for a while now. Its been working very well till today. Today I tried to install some themes and they ended up occupying my full phone memory. So I did some googling and decided to do a hart reset as I didnt have any valuable software installed.
I went ahead with the Hard reset by clicking 'clear storage' and typing 1234
The phone rebooted and got my memory back and everything except that it not connecting to a network. any network.
I use the 2G version of Touch Diamond in India (GSM). It keeps saying cannot register to network. I've tried different networks with SIM cards which are working well with other mobiles and both manual and automatic network selections.
I have done SIM unlocking done in the street as soon as I got the phone, as this came packaged with Airtel. But now the phone is not registering with any network, including airtel.
My stats are
ROM : 1.93.720.2 WWE
Radio : 1.20.OliNex.
SPL 1.23-Hard
Q1 : Does that mean I have HardSPL already?
Q2 : Would re-installing my Radio solve the present problem.?
What should I be doing.
can someone please guide me. I am reading thru this forum and I dont see anyone reporting similar problems
Have you gone to start/ settings / connections "connection setup"?
Just tried doing it. I detected the settings for Vodafone which is my current network, restarted ,but it failed to register again.
The exact message was :
Network error :
Cannot register on selected network. Chose another network or disconnect data connection and try again.
I am pretty sure I have no data connection active
NAAAAAAAAAAH STOP !!!
Just enter Bootloader and write down everything you see !
Never heard of a DIAMOND 2g ? but if its an CDMA the following wouldnt apply !!!
What radio version do you have ?? 1.20 is you SPL ....
go bootloader mode (soft reset + vol down + powerbutton) and write down everything you see there ....
NOT FOR CDMA User!!!
here is the HARD SPL i recommend !
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Then try flashing one of these RADIO roms:
http://forum.xda-developers.com/showthread.php?t=432770
Then do a Hard reset
Softreset + Vol down + Enter button (the round one)
Then follow on screen (you dont need formating MovieNAND - AFAIK vol up should do)
greets
Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?
Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?
And I am sure my Diamond is GSM
When its GSM then u can surely dump your radio rom from sticky thread on it !
Please no double threading !
just follow my short description
I have flashed my Radio to 1.00.25.05 and then to 1.00.25.07, but no luck so far. I am having the same exact issues as before.
What should I be doing, Please
Any more things I can do or should I be taking my 2 months old Diamond to the service center without a warranty ??
hmmm .. i would think its still any type of Sim lock in it, so i would try to contect cmonex / Olipro for a solution ! i think if you donate a bit they can help you with code unlocking.
Did u also Flashed another HardSPL ?
what does tri color bootloader promt out ?
I would try and Flash a new HardSPL Olipro's 1.40 is a good start rather than Jocky's 1.23 (shipped)
Then a ROM that includes a radio - perhaps DuttyThroys
Let us know how you get on...
Before you go to the shop - on the way you can always slap the man in the street that is using pirate unlocking software too - I hope you did not pay him.
links are in my signature (current...)
@Neutron,
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
It is not SIM-Locked, I am sure of it.
@Windoze,
Mate, I was about to ask the same question..?
Since my Diamond is an India specific one (ie NO 3G, Only GSM, GPRS and EDGE), I thought of flashing the India specific ROM presently available on HTC's website which also includes radio 1.00.25.07.
so arise Q : Should I upgrade the HardSPL or shall I Flash the new ROM as it is with my 1.23 Hard..?
As its unlocked by code i would recommend you to flash a shipped rom !
Hard SPL 1.23 or 1.40..? Signed or unsigned if I am flashing the shipped ROM..?
Thanks and sorry for asking so many questions. Just anxious
if you flash your shipped rom it will be signed so no need to upgrade your spl.. dont know which u flash so i would say SPL also will be updated and you need to hardSPL after that... just give it a try ...
I am flashing the ROM with my Hard1.23 in an hour as the file is being downloaded from the HTC website. Will post results. Thanks.
FyreMasq said:
It is not SIM-Locked, I am sure of it.
Click to expand...
Click to collapse
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.
Windoze9t8 said:
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.
Click to expand...
Click to collapse
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?
FyreMasq said:
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?
Click to expand...
Click to collapse
as previous post - try 1.4 olipro HardSPL and a custom ROM from here

O2 XDA diamond WM 6.1 GERMAN ROM to English ROM Error 244 Invalid device id

HI Guys,
I brought a o2 XDA diamond recently, and surprised to see only German Language support on WM 6.1 Os that it has originally flashed.
It seems that HTC supprt also cant help neither the o2 customer care to change the language to English.
As i dont know German, i am finding it very difficult to use.
I desperately want to change to English user interface. However iam afraid of breaking my device completely.
My device is having following specs
OS: WM 6.1 proffesional
CE OS 5.2.19965(Build 19965.1.2.3)
ROM version : 1.93.207.2 GER
ROM Date:8/12/08
Radio: 1.00.25.05
protocol: 52.29.25.12H
Model nr: xda_diamond
PlatformocketPC
I saw many threads on ROM development and followed following procedure.
1. upgraded to Hald SPL by following instruction from http://www.modmydiamond.info/, now my bootloader shows.
Red
diam300 mfg 64M
SPL-1.40.oliNex
MicroP-diam (LED) v11
Green
PSOC -diam STAGE_PVT v0x32
After this step when i tried to update the ROM by using the RUU from,
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Dia mond_52.29.25.12_1.00.25.05_Ship.exe
and
RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.0 0.25.05_Ship.exe
I get following error:
244 : Invalid device ID
And i am unable to update any ROM.
Could anyone from this expert forum please help me? I have following basic questions.
1.Whats wrong with my update process?
2. Which RUU to use to switch to english version?
3. How to get rid of eror 244 Invalid device id?
Request you to please help me out!
Again for those who continue to get stuck.....
Please use Internal Method for flashing
This forum as an awesome Search Feature, that few people take advantage of ......this topic has been covered over 10 times per day. Examples could be found quickly through the use of Search
Hi band27,
Thanks for your reply!
I tried searching "Internal Method for flashing" but i cud not find any useful information.
I saw one more post from you which talks abt using NBHUtil.zip , should i use this utility?
Please help please!
It's actually not a Utility but an instruction:
Yes, follow it. Go all the way to step 8 for Roms. Ignore step 8 if you are flashing a Radio.
Hi band27,
My bootloader shows following info. Is there still a possibility of bricking the device while programming? Now what can brick my device? Just want to be carefull.
red =diam300 mfg 64M
SPL-1.40.oliNex
MicroP-diam (LED) v11
Green PSOC -diam STAGE_PVT v0x32
Thanks
Diamond Man:
----------------------------------------------------------------------------------------------------------------------------------------------------
OS: WM 6.1 proffesional
CE OS 5.2.19965(Build 19965.1.2.3)
ROM version : 1.93.207.2 GER
ROM Date:8/12/08
Radio: 1.00.25.05
protocol: 52.29.25.12H
Model nr: xda_diamond
PlatformocketPC
diamond-man said:
Hi band27,
My bootloader shows following info. Is there still a possibility of bricking the device while programming? Now what can brick my device? Just want to be carefull.
red =diam300 mfg 64M
SPL-1.40.oliNex
MicroP-diam (LED) v11
Green PSOC -diam STAGE_PVT v0x32
Click to expand...
Click to collapse
You are fine.....you have Hard SPL (SPL-1.40.oliNex)
You're protected so go ahead.
Last question.
Hi band27,
Many thanks for your prompt replies!
One last thing i want to ask is, Which RUU will be best for me to change to English language?
Is the EUROPE RUU in English? Or i will have to use ME-WWE version?
Also Can you tell me what does following means? As this is the case with me.
"Make note of the Target CID, Version, Language and Chunk Size. FYI the Model ID is the problematic setting here. If it says DIAM10000 and you have a DIAM300 you're screwed."
Thanks for the ansver in advance!
Hi band27,
Many thanks for your prompt replies!
One last thing i want to ask is, Which RUU will be best for me to change to English language?
Is the EUROPE RUU in English? Or i will have to use ME-WWE version?
Click to expand...
Click to collapse
I don't have much experience with changing languages but the RUU_ is not responsible for this....it's the actually ROM that determines what language you are after.
"Make note of the Target CID, Version, Language and Chunk Size. FYI the Model ID is the problematic setting here. If it says DIAM10000 and you have a DIAM300 you're screwed."
Click to expand...
Click to collapse
Not sure who quoted you all this but CID = Country ID. Don't recall the chunk size significance of the top of my head. Lastly DIAM 100, DAIM300 is just your Devices versions / affiliations from where the device is from.
band27 said:
I don't have much experience with changing languages but the RUU_ is not responsible for this....it's the actually ROM that determines what language you are after..
Click to expand...
Click to collapse
By RUU i means ROM, yes its the ROM inside the RUU package.
But which ROM should i use EUROPE or WWE-ME. Is Europe ROM in English?
band27 said:
Not sure who quoted you all this but CID = Country ID. Don't recall the chunk size significance of the top of my head. Lastly DIAM 100, DAIM300 is just your Devices versions / affiliations from where the device is from.
Click to expand...
Click to collapse
this is from the famous thread that you asked me to follow.
http://forum.xda-developers.com/showthread.php?t=409425
as my device is DIAM300 and there was a note from the author posted above, warning that
"Make note of the Target CID, Version, Language and Chunk Size. FYI the Model ID is the problematic setting here. If it says DIAM10000 and you have a DIAM300 you're screwed.
"
Thanks in advance!
Diamond-man
WWE Roms are in English. Which language are you looking for?
Update the HardSPL
Please update the hardspl from 1.40 to 1.93 first.
Done.
rushy said:
Please update the hardspl from 1.40 to 1.93 first.
Click to expand...
Click to collapse
Thank u.
Rgds

Security Unlocked & 1.20.Olinex Radio Problem!!

hi guys.
i got indian 2g diamond(diam 140).
not i got it 2nd hand from someone. and i find its security unlocked and a preinstalled 1.20.Olinex radio already exists. also its hard spl 1.40.
read a few threads but nothing was much clear.
many ppl claimes that updating to any other custom rom will stop all networks and my diamond will stop getting any networks on any other roms.
i took the risk and flashed it with swtos lite rom and till now everything is working.
now i want to change the radio to somwthing better than the current one.
is it possible that this time i may lock my phone to all netwoorks??
Security Unlock is NOT sim unlock. If the guy told u that it's unlocked to all the networks already then switching radios does nothing to interfere with that.
Switch Radios and let me know how it goes.
I bought a touch diamond 'unlocked' with 1.20.Olinex, I couldn't get my network to register.
I have since paid for Oliinex's unlocking, however my fone will still not connect to ANY network. I believe Olipro is trying to help me solve the dilemna...
I would say if ur happy with ur ROM/Radio now DO NOT flash it until someone confirms that you will not brick ur phone....
Consider that it has the Olipro 1.20 it should have Hard SPL on it already. But if you can, put your device into BOOTLOADER mode (Soft Reset then press the volume down button) please write what you see on the rainbow like screen and then we can take it from there.
band27 said:
Consider that it has the Olipro 1.20 it should have Hard SPL on it already. But if you can, put your device into BOOTLOADER mode (Soft Reset then press the volume down button) please write what you see on the rainbow like screen and then we can take it from there.
Click to expand...
Click to collapse
in bootloader i get:
Security Unlocked
DIAM140 MFG 64M
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
how do i know if its sim unlocked??
sunnyin86 said:
in bootloader i get:
Security Unlocked
DIAM140 MFG 64M
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
how do i know if its sim unlocked??
Click to expand...
Click to collapse
I should say that it is already Sim unlocked as the purpose of the installed Radio is mainly used for that.
dont worry,.just continue . i had the same diamond specs as yours .updated it yesterday . works like a charm!!
my post in the formatting diamond thread
. i followed TNYYNT's "[TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!" and karkalanand's airtel upgrading guide. i have the fastest ROM aztors X2 ULTIMATE and blackstone 1.11.25.01 radio . no problems ,and 1.37 olinex dev edition
didnt brick my phone hopefully
i thank you people for giving me the real DIAMOND EXPERIENCE
band27 for that line gven above
olipro for his sim/cid/security unlocking tools
olipro+cmonex for the oLineX
TNYYNT for the wonderful upgrading guide
karkalanand for the AIRTEL diamond guide(without which i wouldnt have upgraded my diamond)
and ALPHAZERO for creating one of the fastest ROM
lastly - to XDA DEV
-------------------------
now on 2.xx AZTOR X2
bs radio
1.37 olinex
but still an INDIAN diamond !
hey. here is another problem.
i also wanted to buy diamond 3g. a friend of mine is offering me diamond 3g which is security unlocked but am not sure if its sim unlocked. only vodafone and idea networks worked on it and not airtel. so i tried updating its radio to 1.11 and also its rom to swtos lite and now even vodafone and idea is not working on it.
that is no operator network works on it now. what do i do.? also i wanted to tell u that this model is the testing model which htc released to ppl who review the device before its launched. does it makes any difference?
also is it sure that it is sim locked and OLIPRO's sim unlocker will solve my problem?

htc critical error & networking is dow plz help

hi every body first of all i am happy to find some people who really know what to do with this diamond. i tried to flash a rom to radio rom to enable my gps because it was illegal in Egypt since two months ago so,i flashed a signed olines hard spl and tried to flash i the radio again but i failed i found out that when i put the radio.nbh on the device i got that the radio version was changed but i am not able to enable the gps till now and also my wi-fi is down also. please if anyone can interact with me while i was flashing anything that can help me either to fix my diamond (gps,wi-fi) of lead me to get my original hard spl because htc.com have been issuing a new rom that enable the gps.
sorry beacuse it was hard to explaining my problem in that long way
thank you.
hard spl: olinex
radio: 1.00.25.05
rom version:1.93.485.1 WWE
protocol version: 52.29.25.12H
mohamed126 said:
hi every body first of all i am happy to find some people who really know what to do with this diamond. i tried to flash a rom to radio rom to enable my gps because it was illegal in Egypt since two months ago so,i flashed a signed olines hard spl and tried to flash i the radio again but i failed i found out that when i put the radio.nbh on the device i got that the radio version was changed but i am not able to enable the gps till now and also my wi-fi is down also. please if anyone can interact with me while i was flashing anything that can help me either to fix my diamond (gps,wi-fi) of lead me to get my original hard spl because htc.com have been issuing a new rom that enable the gps.
sorry beacuse it was hard to explaining my problem in that long way
thank you.
hard spl: olinex
radio: 1.00.25.05
rom version:1.93.485.1 WWE
protocol version: 52.29.25.12H
Click to expand...
Click to collapse
pls get some help here
http://forum.xda-developers.com/showthread.php?t=470306
As my understanding, once you have HardSPLed your device, you can flash any Diamond radio you want.

Please help me. p3700 SPL1.93.0000 dead

Please help me. p3700 SPL1.93.0000 dead
I DON'T HAVE HARD-SPL ON MY DEVICE.
stop 1%
S/N HT842GN29676 I NEED Original ROM
I'm Sorry for my English
ur current location and where u bought the diamond please.
and are u able to go into bootloader mode by pressing reset+volume down key
yes I can into bootloader mode
yes I can into bootloader mode
once again, can u tell me which country you are and where you bought the diamond (country)
this will help me to locate ur stock rom faster. else i will have to trace ur serial number with a thousand other serials
“once again, can u tell me which country you are and where you bought the diamond (country)” China but it's Smuggled Goods
IMEI 357568011556722
SN HT842GN29676
Screen display
DIAM120 64M
SPL-1.93.0000
MicroP-Diam(LED) V11
PSOC-Diam STAGE_PVT v0x32
once again, I'm Sorry for my English
did you had any carrier logo when ur device started up. i mean during the time when ur device was okay.
Don't had any carrier logo when MY device started up
and as a final verification, which languag did you had ur device in....english or some other language. pls reply...
Since the device relates to chinese. Try this rom and lemme know.
http://shipped-roms.com/download.ph...igned_Diamond_52.29.25.12_1.00.25.07_Ship.exe
Chinese 我英语不好 真不好意思
RUU_Diamond_Dopod_CHS_1.39.706.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
thank you very much
use this rom my device started up
O(∩_∩)O~
Your OS isn't customized
for your hardware.
Please reflash the proper
ROM code or contart the
service crnter
what's wrong
the rom doesnt match. thats bad. which country are you currently in now.
EDIT.
Download and try this ROM
http://rapidshare.com/files/1337487...igned_Diamond_52.29.25.12_1.00.25.05_Ship.zip
I have changed the link above. You shud be downloading that rom actually.
wait a minute. where did u get the rom 1.39
i gave u 1.93 from the first link.
so again...if the link has been mistaken u shud try this http://shipped-roms.com/shipped/Dia...igned_Diamond_52.29.25.12_1.00.25.07_Ship.exe
I get the rom from here http://shipped-roms.com/index.php?category=windows mobile&model=Diamond
RUU_Diamond_hTC_Asia_WWE_1.93.707.1.exe
this ROM STOP 1%
You shud download 1.93 CHS version actually
这是直接的联系。等待加载链接
Download from THIS LINK AND TRY
THIS ROM
RUU_Diamond_Dopod_CHS_1.93.706.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.07_Ship.exe
Your OS isn't customized
for your hardware.
Please reflash the proper
ROM code or contart the
service crnter

Categories

Resources