Develop Bugs

[SOLVED] Touch Diamond Help - No Network after hard reset

Hi all,
I have been using this phone for a while now. Its been working very well till today. Today I tried to install some themes and they ended up occupying my full phone memory. So I did some googling and decided to do a hart reset as I didnt have any valuable software installed.
I went ahead with the Hard reset by clicking 'clear storage' and typing 1234
The phone rebooted and got my memory back and everything except that it not connecting to a network. any network.
I use the 2G version of Touch Diamond in India (GSM). It keeps saying cannot register to network. I've tried different networks with SIM cards which are working well with other mobiles and both manual and automatic network selections.
I have done SIM unlocking done in the street as soon as I got the phone, as this came packaged with Airtel. But now the phone is not registering with any network, including airtel.
My stats are
ROM : 1.93.720.2 WWE
Radio : 1.20.OliNex.
SPL 1.23-Hard
Q1 : Does that mean I have HardSPL already?
Q2 : Would re-installing my Radio solve the present problem.?
What should I be doing.

can someone please guide me. I am reading thru this forum and I dont see anyone reporting similar problems

Have you gone to start/ settings / connections "connection setup"?

Just tried doing it. I detected the settings for Vodafone which is my current network, restarted ,but it failed to register again.
The exact message was :
Network error :
Cannot register on selected network. Chose another network or disconnect data connection and try again.
I am pretty sure I have no data connection active

NAAAAAAAAAAH STOP !!!
Just enter Bootloader and write down everything you see !
Never heard of a DIAMOND 2g ? but if its an CDMA the following wouldnt apply !!!
What radio version do you have ?? 1.20 is you SPL ....
go bootloader mode (soft reset + vol down + powerbutton) and write down everything you see there ....
NOT FOR CDMA User!!!
here is the HARD SPL i recommend !
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Then try flashing one of these RADIO roms:
http://forum.xda-developers.com/showthread.php?t=432770
Then do a Hard reset
Softreset + Vol down + Enter button (the round one)
Then follow on screen (you dont need formating MovieNAND - AFAIK vol up should do)
greets

Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?

Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?
And I am sure my Diamond is GSM

When its GSM then u can surely dump your radio rom from sticky thread on it !
Please no double threading !
just follow my short description

I have flashed my Radio to 1.00.25.05 and then to 1.00.25.07, but no luck so far. I am having the same exact issues as before.
What should I be doing, Please

Any more things I can do or should I be taking my 2 months old Diamond to the service center without a warranty ??

hmmm .. i would think its still any type of Sim lock in it, so i would try to contect cmonex / Olipro for a solution ! i think if you donate a bit they can help you with code unlocking.
Did u also Flashed another HardSPL ?
what does tri color bootloader promt out ?

I would try and Flash a new HardSPL Olipro's 1.40 is a good start rather than Jocky's 1.23 (shipped)
Then a ROM that includes a radio - perhaps DuttyThroys
Let us know how you get on...
Before you go to the shop - on the way you can always slap the man in the street that is using pirate unlocking software too - I hope you did not pay him.
links are in my signature (current...)

@Neutron,
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
It is not SIM-Locked, I am sure of it.
@Windoze,
Mate, I was about to ask the same question..?
Since my Diamond is an India specific one (ie NO 3G, Only GSM, GPRS and EDGE), I thought of flashing the India specific ROM presently available on HTC's website which also includes radio 1.00.25.07.
so arise Q : Should I upgrade the HardSPL or shall I Flash the new ROM as it is with my 1.23 Hard..?

As its unlocked by code i would recommend you to flash a shipped rom !

Hard SPL 1.23 or 1.40..? Signed or unsigned if I am flashing the shipped ROM..?
Thanks and sorry for asking so many questions. Just anxious

if you flash your shipped rom it will be signed so no need to upgrade your spl.. dont know which u flash so i would say SPL also will be updated and you need to hardSPL after that... just give it a try ...

I am flashing the ROM with my Hard1.23 in an hour as the file is being downloaded from the HTC website. Will post results. Thanks.

FyreMasq said:
It is not SIM-Locked, I am sure of it.
Click to expand...
Click to collapse
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.

Windoze9t8 said:
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.
Click to expand...
Click to collapse
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?

FyreMasq said:
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?
Click to expand...
Click to collapse
as previous post - try 1.4 olipro HardSPL and a custom ROM from here

G3 or G4? Why no info?

Hello all,
i'm trying to upgrade my jasjar to wm6, just downloaded Wizard Service Tool and clicked on "enab. rapi + unsigned". Then "device info" and i have obtained this report:
--------------------------
Wizard Service Tool v4.2.2
22/01/09 10:01:38
CPU Manuf. FAILED
IMEI:
=> Bootloaders:
IPL: (G3 device)
SPL date unknown
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 0.0
Registry AKU: .2.0.0
Radio values FAILED
=>Extended_ROM:
Version: 1.30.169 ITA
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
72a24b06 - 977.98M (0x3d1fc000)
33d6c012 - 9.99M (0x9fd800)
33e230ea - 44.43M (0x2c6dc00)
53e71212 - 56.75M (0x38c0000)
b3e71026 - 3.19M (0x330000)
73e71002 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000802202020c2f157a1507051b
Key Index: 20
All Done.
--------------------------
Question: it's normal that a lot of fields are empty? IPL and SPL especially?
I'm sure to have a "G3" even if IPL is empty?
...and someother generic question:
ROMS are all interchangeable? If i want to try another wm6 rom, can i reflash?
ROMS contains all languages, or if i want to retain ITALIAN i have to search for an italian ROM?
Thanks very much!

you can reflash as many times as you want and languaje can be anyone you like
<Good luck,

orb3000 said:
you can reflash as many times as you want and languaje can be anyone you like
Click to expand...
Click to collapse
Thanks, now i'm stopped because i dont know if i have a G3 or G4 and dont know how to interpret the fact that Wizard utility dont show a lot of informations... maybe a problem....

ZuperMario said:
Thanks, now i'm stopped because i dont know if i have a G3 or G4 and dont know how to interpret the fact that Wizard utility dont show a lot of informations... maybe a problem....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=348882
Good luck,

orb3000 said:
http://forum.xda-developers.com/showthread.php?t=348882
Good luck,
Click to expand...
Click to collapse
Thanks but the real question is why wizard utility dont show a lot of information: if there is something "strange" or locked on my device, i can get unpredictable results going ahead with reflashing procedure... i think.

I have the same problem with my Universal.
I flashed it with Tomal's 8.2 without trying Wizard service tool, 'cause Uni arrived me with wm6.0, so I thought it was unlocked.
Now I'm going to flash a friend of mine original G3, and looking for how to unlock it, I found some apps that I tried on mine.
The message I receive on Wizard Service Tools is similar to yours, also when I check CID it says that the cheksum is incorrect:
-----------------------------------------
Decrypted stored sum: 2020202020202020
Decrypted calcd sum: CB2C31FAACFE5801
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
-----------------------------------------
Question is: may I use this program to superCID the G3 Uni?

hardspl type

i just receive this phone
i only change radio
i can't know is my spl signed or not
i did alot of search and ask members here
but i get confused
once unsigned and once change it to unsigned
plz tell me and tell me how u know it's signed or not
my phone info
security unlock
rom verison:1.37.110.3 wwe
rom update 6/20/08
radio version: 1.0.25.5
diam200 mfg 64m
spl-1.40.olinex
microp-diam (LED)v11
PSOC-vict stage_pvt v0x20

Searching can provide you with the same answer -
From what you show - I can confirm you have Unsigned HardSPL and that you phone has been unlocked (perhaps with stolen software) to use any sim - Hope this helps.

unknown83 said:
i just receive this phone
i only change radio
i can't know is my spl signed or not
i did alot of search and ask members here
but i get confused
once unsigned and once change it to unsigned
plz tell me and tell me how u know it's signed or not
my phone info
security unlock
rom verison:1.37.110.3 wwe
rom update 6/20/08
radio version: 1.0.25.5
diam200 mfg 64m
spl-1.40.olinex
microp-diam (LED)v11
PSOC-vict stage_pvt v0x20
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=482959
unknown, you have to be more subtle/patient. you post the same question in so many threads, you don't even look at the old ones. even within a 2 day span.
@republik
I admire your patience. Answering him 3 times on the same question: this thread, the link above and the link below:
http://forum.xda-developers.com/showthread.php?t=478213
Unknown, what is your mother tongue? It might be easier to find the help you need in that language.

Kevbodian said:
@republik
I admire your patience. Answering him 3 times on the same question:
Click to expand...
Click to collapse
LOL, well spotted
Some people never learn.

Security Unlocked & 1.20.Olinex Radio Problem!!

hi guys.
i got indian 2g diamond(diam 140).
not i got it 2nd hand from someone. and i find its security unlocked and a preinstalled 1.20.Olinex radio already exists. also its hard spl 1.40.
read a few threads but nothing was much clear.
many ppl claimes that updating to any other custom rom will stop all networks and my diamond will stop getting any networks on any other roms.
i took the risk and flashed it with swtos lite rom and till now everything is working.
now i want to change the radio to somwthing better than the current one.
is it possible that this time i may lock my phone to all netwoorks??

Security Unlock is NOT sim unlock. If the guy told u that it's unlocked to all the networks already then switching radios does nothing to interfere with that.
Switch Radios and let me know how it goes.

I bought a touch diamond 'unlocked' with 1.20.Olinex, I couldn't get my network to register.
I have since paid for Oliinex's unlocking, however my fone will still not connect to ANY network. I believe Olipro is trying to help me solve the dilemna...
I would say if ur happy with ur ROM/Radio now DO NOT flash it until someone confirms that you will not brick ur phone....

Consider that it has the Olipro 1.20 it should have Hard SPL on it already. But if you can, put your device into BOOTLOADER mode (Soft Reset then press the volume down button) please write what you see on the rainbow like screen and then we can take it from there.

band27 said:
Consider that it has the Olipro 1.20 it should have Hard SPL on it already. But if you can, put your device into BOOTLOADER mode (Soft Reset then press the volume down button) please write what you see on the rainbow like screen and then we can take it from there.
Click to expand...
Click to collapse
in bootloader i get:
Security Unlocked
DIAM140 MFG 64M
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
how do i know if its sim unlocked??

sunnyin86 said:
in bootloader i get:
Security Unlocked
DIAM140 MFG 64M
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
how do i know if its sim unlocked??
Click to expand...
Click to collapse
I should say that it is already Sim unlocked as the purpose of the installed Radio is mainly used for that.

dont worry,.just continue . i had the same diamond specs as yours .updated it yesterday . works like a charm!!
my post in the formatting diamond thread
. i followed TNYYNT's "[TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!" and karkalanand's airtel upgrading guide. i have the fastest ROM aztors X2 ULTIMATE and blackstone 1.11.25.01 radio . no problems ,and 1.37 olinex dev edition
didnt brick my phone hopefully
i thank you people for giving me the real DIAMOND EXPERIENCE
band27 for that line gven above
olipro for his sim/cid/security unlocking tools
olipro+cmonex for the oLineX
TNYYNT for the wonderful upgrading guide
karkalanand for the AIRTEL diamond guide(without which i wouldnt have upgraded my diamond)
and ALPHAZERO for creating one of the fastest ROM
lastly - to XDA DEV
-------------------------
now on 2.xx AZTOR X2
bs radio
1.37 olinex
but still an INDIAN diamond !

hey. here is another problem.
i also wanted to buy diamond 3g. a friend of mine is offering me diamond 3g which is security unlocked but am not sure if its sim unlocked. only vodafone and idea networks worked on it and not airtel. so i tried updating its radio to 1.11 and also its rom to swtos lite and now even vodafone and idea is not working on it.
that is no operator network works on it now. what do i do.? also i wanted to tell u that this model is the testing model which htc released to ppl who review the device before its launched. does it makes any difference?
also is it sure that it is sim locked and OLIPRO's sim unlocker will solve my problem?

O2 xda diamond flashing problem

I have o2 xda diamond -but when i see the device setting it's say (htc touch diamond p3700) with ID DIAM300
rom 1.93.831.1 wwe
rom date 07/18/08
radio version 1.00.25.05
protocol 52.29.25.12h
first
i was flash my phone with hard -spL-1.37 olinex and i cant flash any rom
then i flash hard-spL-1.39 olinex .hard-spl-1.40 olinex -development verision .
When i inter boot loader it's hard-spl40 olinex
but i cant flash any rom it's error invaild id trying a lot rom wm6.1
nothing work it's closed at 1% then i see the error
then i trying flashing the rom by storege method but's not work too....
i no know what's the wrong ???
Please help me .......
Sorry for bad language

make manual usbflashing threecollor settings and use normal ruu for flash.Maybe im more time use for ole htc diamond because show me message low battery but battery is full 70-80 % and im use usbsettings <threecolor menu> and flash

a_2004_81 said:
I have o2 xda diamond -but when i see the device setting it's say (htc touch diamond p3700) with ID DIAM300
rom 1.93.831.1 wwe
rom date 07/18/08
radio version 1.00.25.05
protocol 52.29.25.12h
first
i was flash my phone with hard -spL-1.37 olinex and i cant flash any rom
then i flash hard-spL-1.39 olinex .hard-spl-1.40 olinex -development verision .
When i inter boot loader it's hard-spl40 olinex
but i cant flash any rom it's error invaild id trying a lot rom wm6.1
nothing work it's closed at 1% then i see the error
then i trying flashing the rom by storege method but's not work too....
i no know what's the wrong ???
Please help me .......
Sorry for bad language
Click to expand...
Click to collapse
Hi, I also have an o2 xda ignito...Download the attached file, and extract "SSPL_Manual" onto your phone and run it, the screen will go blank...now just flash with hard spl olinex 1.93 unsigned by running "DiamonCustomRUU" and then flash the rom of your choice.

Yessss it's working now
Yes it's work . Thanks for all supporting.............