Related
hi all
I have flashed my Qtek 9000 with o2 rom and all works fine. but I have noticed one problem which is when I chose the basic defullt setting of the O2 the Bluetooth wont received and cant be descoverd even if the bluetooth is on and there is a tick on make the divce discoverable.
However, when i chose the Corporate setting of the O2 and the code 0506 the bluetooth works fine sending and receiving. Any thought of why is this problem happing ?
Thanks
I think there is a BLUETOOTH PATCH included in the Extended ROM. Maybe Corporate mode installs it, but Basic no.
Can you Install Basic mode and try to run the file from the extended ROM? It might look something like this:
Default_Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
I'm not sure. Goodluck
thanks brother still facing the same problem
Is your Bluetooth Problem in regards to connecting to Hands Free Headsets? Or transfereing files, etc.?
What exactly can't you do with the Bluetooth in Basic that you can do in Bluetooth of Corporate?
thanks Jorgee
i managed to solve it by going back to the old o2 rom
it was file transfer problem
:wink:
You have to have the BEAM option in CONNECTIONS enabled to be able to transfer OBEX Bluetooth
Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.
jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.
Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)
With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.
idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also
rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software
Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?
I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.
walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk
i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...
Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.
Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??
My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.
Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.
On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.
BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.
Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.
Hi, I have:
- TYTN with WM6 (latest version from Schap)
- VW Touareg with Premium Bluetooth kit (2007 touch-screen model)
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car kit cannot connect to the phone for some reason.
I'm not sure why, but what I do know is that SAP has worked with a Nokia phone (dealer tested it with me). There, it downloaded its address book. It doesn't do that with my TYTN. I have double-checked all my settings on my phone, it has SAP and bluetooth enabled
So, has anybody managed to see their SAP in action on the WM6 enabled TYTN, and if so did it work "straight out of the box" or did you do something magical that you're willing to share!!!
If it's not working I'll just buy a £40 unlocked Nokia with SAP support and use that, but preferably I'd like to use my own phone.
Thanks for your help!
- Install the BT SAP cab you find here
http://forum.xda-developers.com/showthread.php?t=319468
- Enable Remote Sim Access
- Softreset
and it should be working. (does only synchronise the contacts on your SIM though, not the contacts in your phonememory)
Working here perfectly with VW Passat '07 with Premium Bluetooth Handsfree (ROM: Hypercore Lite SE). If you have any questions you can pm me.
WDawn said:
- Install the BT SAP cab you find here
http://forum.xda-developers.com/showthread.php?t=319468
- Enable Remote Sim Access
- Softreset
and it should be working. (does only synchronise the contacts on your SIM though, not the contacts in your phonememory)
Working here perfectly with VW Passat '07 with Premium Bluetooth Handsfree (ROM: Hypercore Lite SE). If you have any questions you can pm me.
Click to expand...
Click to collapse
Thanks WDawn,
Well it's promising you got it to work!! (yay!)
But I had spotted your post on the forum, downloaded the file, but the phone refuses to install it. I tried it on the older Schaps version, and I've even updated to the latest Schaps version. Both fail.
This is what happens: when I install in the Main Memory it says I do not have the required permissions, and when I install in the Extended Memory it says that it cannot install. When I tried installing it on the MiniSD card it produces the same as the memory message. I copy and pasted the file from my computer onto my phone, and tried installing it from the MiniSD card. I did not try to install it from the phone's memory itself I am just thinking.
Any idea???
Thanks!! (also thanks for confirming it's only SIM address book, forgot about that one )
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
WDawn said:
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
Click to expand...
Click to collapse
I've heard the handsfree kit yes and it's fantastic, I agree!
Unfortunately, the file still refuses to install . Everything else works. I can install other things without a problem. I've unlocked the phone, checked registry settings (the policies one) and ran various unlockers. That seemed to do something (different security message, or sometimes none) but this particular cab file simply refuses to install.
So I'm afraid and you're right, I'll have to change to the Hypercore ROM... Shame because I liked the way Schap's ROM looks but I will try this because if it's just for looks I might be able to survive with another template
If in the meantime you or anyone else has any brilliant ideas let me know. Otherwise I'll revert this weekend - to let you know whether it succeeded or not (useful for others too on the forum perhaps!).
WDawn said:
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
Click to expand...
Click to collapse
OK, I've reflashed my phone with Hypercore Lite SE and installed the BT_Test.cab file (which installed successfully) but it's still not working!!
Mind you, my girlfriend and I have the same phone (so 2x TYTN); I flashed hers twice (two diff ROMs), and I flashed mine twice. They are both "found" by both ROMs by the car kit, but once you've inserted that 16-digit security code the carkit gives it is paired but the carkit says it cannot establish a connection.
With both phones!!!!
I know the kit works as it paired with a simple Nokia effortlessly. That's probably because Nokia supplies the technology to VW.
So, unless someone has got a really smart idea, it looks like I'll have to buy a cheap unlocked Nokia 6230 from ebay...
I just find it really annoying you managed to get it to work (good for you ) but that the result is different for me! that's bizarre.
Anyone!??!?!?
Have you tested it with an official release of WM6 from HTC just to see if an unmodified version will work?
Scrambler001 said:
Have you tested it with an official release of WM6 from HTC just to see if an unmodified version will work?
Click to expand...
Click to collapse
It's a good point - not yet!
Where can I download this from other than from HTC directly?? I have a T-Mobile Vario II and this does not come with an HTC membership (I've already tried via HTC's website)... Bit stupid really as it's the same device but there you go. T-mobile has no update unfortunately.
Cheers
Ah, I found a working link via the main page...
I'll post back to confirm the result - thanks!
Hope it works for you. If it does then you know it's probably some settings someplace that need tweaking or it could be a prog thats in the cooked ROM that just does not agree with your system configuration.
It didn't work.
After all that hassle of downgrading rom, SuperCIDing etc...
It doesn't work with the original HTC WM6 ROM arghhhhhhhhhhh
Always accepts the 16-digit code but then the "handshaking" stops; it pairs but the carkit "cannot establish a connection". As if it's incompatible, but then some other people managed to get it to work.
It's unbelievable.
Really bizarre
I'm [this] close to buying a Nokia 6230. Grrr.
You can alway put it back to WM5 if it's that important but I know you don't really want to do that. It was a good try though.
Hello xda community!
I have a huge problem with my Hermes using Shaps Roms (latest), besides I tried all of the roms till now, and bluetooth devices!
I tried 3 devices till now:
Parrot 3200
Audi UHV
and a Sennheiser VMX 100 ear- handsfree
so first I had problems with the Audi to get a stable BT transmission without disconnect which is solved due to a rom change!
Now the problem is with picking up, or dialing.
For example BT -> Audi UHV connected!
Using phonebook to dial a number -> dialing ... it displays in the Audi -> Dialing.. and when the connection is established its shoud says connected like in phone but sometimes just shows "Hanging up.." -> while the Hermes display says connected!
And I am definitly connected to the person but I cant hear anything not on the phone or the BT Kit!
This is extremly anoying -> and not only withe the Audi, even the simple Sennheiser earphone there is exactly the same problem! or the Parrot!
The phone is not able to send correct "commands" Pick UP -> Connected -> Disconnected. I mean THIS IS A HORROR!
Its not a permanent error but it it shows quite often (6 tomes out of 10 calls) up it does it again and again till sofot reset!
Please someone help me !!!!!
PS i also tried Jetware Mobile same problem no difference ....
Greets,
fire
Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...
CRCinAU said:
Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...
Click to expand...
Click to collapse
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?
Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.
firefoxy said:
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?
Click to expand...
Click to collapse
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.
Hissing Syd said:
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.
Click to expand...
Click to collapse
interesting.. so if you dial a number the tytn sends to your ford the correct status of the calling process ?
start - call - stop ?
never had such issue:
Ford: start - stop
Hermes: start - call ...
silence on both ?
CRCinAU said:
Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.
Click to expand...
Click to collapse
First results:
15 minutes it works like a charm - no phonebook entries just the plain rom.
now I ll snyc with outlook and start another test!
* Stange thing is that the Audi UHV found my phonebook entries although i dind´t snyced them. Sim is empy ...
can there be something in extended rom ?
Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?
CRCinAU said:
Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?
Click to expand...
Click to collapse
First of all thanks for all the replies!!
The Audi UHV is capable to use rSAP, but I have no idea what it does and what it´s good for.
What is the difference between SAP and HFP ? I have nothing on the sim card.
Now you're getting a bit beyond my knowledge as I don't have any of these systems to test or experiment with
+1
I have had the same problems with multiple ROMs.
Trying to link a Garmin GPS, and other Hands Free devices.
Seems like a Hermes thing rather than the ROMs.
Try deleting the BT device from the Hermes, but not the device. Re-sync from the device.
Not sure if that will help, but I had weird BT problems with the 4.30 rom and that fixed it. No problems at all with the 4.31 though.
I will start some testing today and report back tonight!
Maybe it was the rsap being enabled in Shaps roms .... we will see!
The question is, should I install Jetware Mobile or not ?
It seems to be faster in syncing if I have it installed.
So far I tested it yesterday for half an hour and it worked!