Develop Bugs

fix: gmail - javamidlet

Ever since the new custel, lsvw, black 3.0 and etc... I can't get gmail to work well on any of them. I installed the new midlet fix and still nothing - anyone fixed the problem?

Do those use the Java applet?
If so and it's the same one as Custel 2.5 (not sure about the other ROMs):
1. Attempt to download the gmail applet from the Get Faster gmail link from http://gmail.google.com
2. After waiting for the Midlet Manager to complete, exit both the browser and Midlet Manager.
3. Open the Java applet and select the option on the Menu to Install from a local source (which should be there after it fails to download successfully from the google site; a .jad file sitting in My Documents).
I have the file on my phone. If you need it, please advise. Hopefully, this helps.

crazyut said:
Do those use the Java applet?
If so and it's the same one as Custel 2.5 (not sure about the other ROMs):
1. Attempt to download the gmail applet from the Get Faster gmail link from http://gmail.google.com
2. After waiting for the Midlet Manager to complete, exit both the browser and Midlet Manager.
3. Open the Java applet and select the option on the Menu to Install from a local source (which should be there after it fails to download successfully from the google site; a .jad file sitting in My Documents).
I have the file on my phone. If you need it, please advise. Hopefully, this helps.
Click to expand...
Click to collapse
Could you please post the .jad file. Whenever i goto the site for the faster gmail it detects my phone as LG CU500 for some weird reason. And the one it downloads, the login button wont work.
Thanks in advance for your help.

^^^ You can easily tell it that you are not that phone and will give you the option to download the 'general' J2ME version.
I know you can do that because sometimes I change my phone to be seen as a PC and I get an error close to what you are getting.
Worse case scenario, you can find and download the app to you PC then transfer to your phone. It will take you only a few minutes.
Please try again. If not there are other sites that have the java app. No disrespect but don't act as a lazy noob.

It sees my Softbank X01HT as a Dopod 730 (something close to this). I have attached the file; hopefully, this is what you are looking for.
Rename the file to gm-Generic-Advanced-MIDP2.jad (in other words, delete the .zip extension; it is NOT a zip file).
thap143 said:
Could you please post the .jad file. Whenever i goto the site for the faster gmail it detects my phone as LG CU500 for some weird reason. And the one it downloads, the login button wont work.
Thanks in advance for your help.
Click to expand...
Click to collapse

crazyut said:
It sees my Softbank X01HT as a Dopod 730 (something close to this). I have attached the file; hopefully, this is what you are looking for.
Rename the file to gm-Generic-Advanced-MIDP2.jad (in other words, delete the .zip extension; it is NOT a zip file).
Click to expand...
Click to collapse
Thanks a lot crazyut got it working now... Appreciate your help...

Why midlet?
Isn't it more convenient to have gmail connect with the standard inbox rather than a java midlet? That way you can set it to check your mail in your specified time frame? I've had it working with all roms i've tried this far, (dutty, lsvw, black, and custel)

wow.. the midlet works fine - better than the version detected as LG when we download from gmail directly.

Running an application

Hi guys,
I'm trying to run a regedit program on my 02 XDA 11s.
I have tried several, and when I try to run the setup or exe I get the following message:
"There is no application associated with SETUP. Run the application first then open this file from within the application"
Any ideas, it must be something simple as I have tried several different programs and all experience this problem.
Thanks in advance,
Rob.

whats the file type ?
cab
exe if it's exe you should make sure it's not a pc activesync install
if it's zip
or rar
you should make sure that you have a unpacker for those 2

I think the program I tried to run was not for my mobile device.
Is there a stand-alone regedit program avaiable that I can download.
Thanks,
Rob.

http://www.phm.lu/Products/PocketPC/TaskMgr/

Many thanks.
I think I need to connect via the Sync cable and use the ActiceSync cable as most applications seem to have to be installed this way.
Thanks,
Rob.

unable to update hx4700 2003 - MW6 using Bootloader!

I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil

Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.

Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?

Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk

Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy

Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk

Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil

After extracting using WinRAR

Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.

Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.

Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk

Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.

photo contacts pro

where can i download photo contacts pro 5 from. I would love to have this!!!!!

Here you go

when i try and use the file i get a error message. Is there a cab file for it

What cab are you looking for exactly?

1/26/08 said:
when i try and use the file i get a error message. Is there a cab file for it
Click to expand...
Click to collapse
Haha extract it to your computer and then drag it to your phone because thats a .zip file and your phone does not recognize a .zip file.

ok we i try to install and rin the file on my phone it gives me a message sayn (photocontactpro sp v40 signed is not a valid windows ce application)

ummm let me try to see whats wrong with it.

1/26/08 said:
ok we i try to install and rin the file on my phone it gives me a message sayn (photocontactpro sp v40 signed is not a valid windows ce application)
Click to expand...
Click to collapse
Download this and see if this will work ok. http://rs117.rapidshare.com/files/54653658/photocontactsprov507l.zip

i get the same message

Umm try to run it from the computer and see what happens.

it runs the file jz fine

oh ok so did you get it working then?

not on my fone is there a way i can get diz in a cab file?

1/26/08 said:
not on my fone is there a way i can get diz in a cab file?
Click to expand...
Click to collapse
ummm I am not sure, I know that a .cab file would solve everything.

yeah it really would. well thankz alot!! for your help in time if you find something out jz let me know

Just so you all know programs like these use your computer to install the program.
Make sure your phone is connected using a usb cord and it'll install it.

you might need to App Unlocl your phone. goto: mobile.surrealnetworks.com and click on applications for Dash. there is one or two programs that will unlock your phone to allow various programs to be installed. that might do the trick. someone correct me if im wrong.
...just my $.02

sunday247 said:
you might need to App Unlocl your phone. goto: mobile.surrealnetworks.com and click on applications for Dash. there is one or two programs that will unlock your phone to allow various programs to be installed. that might do the trick. someone correct me if im wrong.
...just my $.02
Click to expand...
Click to collapse
Yea or here are the files to app unlock install the first one and then second one.

Newbie: Photo Contacts Pro 5 info
Hi All,
I am a newcomer to this forum and let me tell you that you guys do a great job with coming up with information and guidelines on Excalibur software so I have to give you applause for that. Does anybody have any info on this? I have the demo and it seems like it is a good application.
Thanks

I loathe photo contacts pro 5..... version 4.03 was and is the best one for the excalibur. my reasoning? after 4.03 the program doesn't run in the background. It shows up in task managers and is easly closed which defeats the purpose of having the program. It also takes up more memory and is even more laggy then version 5. if you can find a version 4.03 i highly recommend you try it.

HTC sync, do I really need it?

Ok, here's the deal:
I don't like installing software on my computer that I don't need, and as far as I can tell, HTC sync is primarily aimed at synchronizing contacts and calendar to your computer, none of which I want or need. It also offers installation of apps to the phone, but for that I would prefer using either the adb tool from the sdk or just putting the apk files on the memory card and installing via a file manager on the phone.
First question:
I realize that I need the adb driver for my phone, and this driver is installed alongside/by HTC sync, so it is clearly packaged inside the HTC sync setup file. Does anyone know if it is possible to extract just the driver from the setup file? I know there is a zip floating around with the adb driver (I've downloaded that), but if it can be extracted from the setup file that's even better, since it would be an easy way to obtain the latest version.
Second question:
At some point in the future I expect there will be ROM updates to the phone. These are self contained exe-files, but according to the HTC support pages you need to have HTC sync installed to install them. Is this really true, or is it sufficient to have the adb driver installed?
Third question:
If I want to use the phone for USB tethering to give the computer internet access, which driver is needed for that? The ADB driver? Or must I have the full HTC sync installed for that to work?
Any answers appreciated!
Best regards
-Øyvind

Here are my answers to the best of my knowledge:
#1 - I have not found the driver available on it's on yet. However, I'm sure Mircosoft is soon to be adding it to it's list of drivers.
#2 - Most updates to the phones are done OTA ( Over the air), so you need not worry about about the HTC sync doing updates.
#3 - You will need the driver to tether your phone, but not the HTC desktop app.
For my setup I ran the setup file than uninstalled the HTC Sync but left the driver and everything seems to be ok.
Hope this helps

Thanks. Regarding #1, as I mentioned in the OP, a reportedly working ADB driver can be found in this post, but if it can be extracted from the HTC sync setup that would be even better. I've looked at it, but none of the files inside the setup file looked very promising (no inf-file to be found).
I know about OTA updates, but for older HTC phones (the Hero, for instance) there are downloadable rom updates. Are the exact same updates usually also sent out as OTAs?
As for #3, I know a driver is required, I just wanted to know which driver it was, and if it can be found separately.
Your tip on installing HTC sync to get the driver and then unistalling has been noted. Thanks.

+1 on installing and then uninstalling.
HTC sync installs two items, the second one, HTC Driver Installer, contains the ADB driver and the Tethering driver.

This was really helpful!
I tried installing HTC sync in a virtual machine to avoid cluttering my real machine, and during the install I chose "Custom". There I deselected the option for "Sync Manager" and installed only the "Application Installer" item.
I also monitored the install with a utility uninstaller, and it turns out that there is actually a "HTC Driver Installer" lurking inside the setup file. This file is temporarily extracted during the install, and I was able to manually make a copy of it before it was removed. The file name is HTCDriver.msi, and it contains all the driver files (both 32 and 64 bit). It can be used for a standalone install of just the drivers.
Thanks again! I think I'm fully sorted now!

Hi any chance of uploading the msi?

s4vva said:
Hi any chance of uploading the msi?
Click to expand...
Click to collapse
The file is ~14 MB, so it is too big to attach here. Any preferred site where I could upload it? The msi has been extracted from HTC sync version 2.0.33, btw.
Edit: I found out that 7zip actually could compress the file a lot more, so I have attached it. Please be aware that even though it has a .zip extension, it is really a 7z-file. Had to rename it to zip to get it to upload. The mods could perhaps allow 7z-files in addition to .zip?

MegaUpload or SendSpace personally

EddyOS said:
MegaUpload or SendSpace personally
Click to expand...
Click to collapse
I've edited my post. I found a way to attach it after my initial posting.

The wonders of 7-Zip!!
Thanks a lot!! I use HTC Sync but this is handy

Thanks, just what I needed.

mroek said:
This was really helpful!
I tried installing HTC sync in a virtual machine to avoid cluttering my real machine, and during the install I chose "Custom". There I deselected the option for "Sync Manager" and installed only the "Application Installer" item.
I also monitored the install with a utility uninstaller, and it turns out that there is actually a "HTC Driver Installer" lurking inside the setup file. This file is temporarily extracted during the install, and I was able to manually make a copy of it before it was removed. The file name is HTCDriver.msi, and it contains all the driver files (both 32 and 64 bit). It can be used for a standalone install of just the drivers.
Thanks again! I think I'm fully sorted now!
Click to expand...
Click to collapse
Hi,
Can you please share the HTCDriver.msi OR can the procedure or extracting the same from the setup exe?
Many thanks!
Vivek

This file seems useless to my windows 10 laptop....