Hi guys,
I'm trying to run a regedit program on my 02 XDA 11s.
I have tried several, and when I try to run the setup or exe I get the following message:
"There is no application associated with SETUP. Run the application first then open this file from within the application"
Any ideas, it must be something simple as I have tried several different programs and all experience this problem.
Thanks in advance,
Rob.
whats the file type ?
cab
exe if it's exe you should make sure it's not a pc activesync install
if it's zip
or rar
you should make sure that you have a unpacker for those 2
I think the program I tried to run was not for my mobile device.
Is there a stand-alone regedit program avaiable that I can download.
Thanks,
Rob.
http://www.phm.lu/Products/PocketPC/TaskMgr/
Many thanks.
I think I need to connect via the Sync cable and use the ActiceSync cable as most applications seem to have to be installed this way.
Thanks,
Rob.
Related
When trying to run xda tools I get the message
This application failed to start because RAPI.dll was not found, reinstalling the application may fix this problem. I have tried downloading xda tools again, but still get the same thing. Any ideas
Thanks.
I think it comes with activesync, did you install that?
spikeybhoy said:
When trying to run xda tools I get the message
This application failed to start because RAPI.dll was not found, reinstalling the application may fix this problem. I have tried downloading xda tools again, but still get the same thing. Any ideas
Thanks.
Click to expand...
Click to collapse
Rapi.dll is part of Microsoft's ActiveSync software. ActiveSync is needed to sync your Pocket PC device with your computer. You can download the latest version here: http://www.microsoft.com/windowsmobile/activesync/default.mspx
Install ActiveSync and then run ContentManager.exe to install the application to your device.
Works great!
I installed Windows Mobile Device Center.Everything goes perfect. Thank you guys!
Has anyone else had this problem:
I've downloaded the PHMregedit msi from phm.lu (the activesync desktop installer version) and installed it in the same way as every other add-on, i.e. just double click the msi.
It installs to the desktop machine OK and it pulls up the ActiveSync installer as per normal BUT regedit does not appear on the ActiveSync "programs to install" list.
If I OK the install dialog then the install finishes up as normal but there is no "please check your mobile device for any additional required steps" message and the software is not installed on the XDA.
Everything else that I try installs fine.
Is there some other step I should be doing or is there a problem here?
Thanks
Pete
I just use the CAB file. Here it is:
Drag cab to my device/Documents/ run cab... then I get "unsuccesfull"
Any ideas?
RE
Why don't you try another FREEWARE registry editor, Tascal Registry Editor (TRE), here:-
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/tre_e.htm
It works well on my QTEK9000 aka Universal
Also read http://www.pocketpcmag.com/blogs/menneisyys/UltimateRoundupOfRegistryEditors.asp
Thanks Guys... Should keep me busy for a while/
FWIW, I just had the exact same problem with PHM Registry Editor. It would load up just like another program, launch the ActiveSync program loader, but then nothing would appear on my 8525. I tried soft booting a couple of times and various other combinations with no results...
However, dragging the CAB file to my storage card and then running it from the unit seemed to do the trick. Thanks for posting that cktlcmd!
cktlcmd
I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil
Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
After extracting using WinRAR
Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.
Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.
Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk
Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.
Apologies if this has been covered elsewhere, but a forum search revealed nothing...
How do I install .NET 3.5 on my Touch HD?
I have installed Advanced Congif , and it tells me i need to install .NET in order for it to work.
I downloaded the .net redistributable file from the MS website (filename is NETCFSetupv35.msi), but when I try to run it on my HD as I would with a .cab file, it tells me there's no associated program to run it.
I guess it has to be installed some other way (through ActiveSync maybe?), but I don't know.
Any helpful soul out there care to put me out of my misery?
Cheers in advance
Pete
Yes it has to be done through Activesync.
run it on your pc, and it will install on your device (or next time you connect if you're not connected when you run it)
It says on the microsoft download page...:
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
and
Instructions
Click the Download button on this page to start the download, or choose a different language from the drop-down list and click Change.
Do one of the following:
To start the installation immediately, click Open or Run this program from its current location.
To copy the download to your computer for installation at a later time, click Save or Save this program to disk.
...
Use a CAB
myearwood173 said:
Yes it has to be done through Activesync.
Click to expand...
Click to collapse
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Link:
http://www.fileden.com/files/2008/7/1/1983933/Microsoft_.NET_CF_3.5.CAB
Thanks!
Thanks guys,
sorted, using the .cab (couldn't work out how to do it with Activesync).
Can't install :-(
Nooo! I have a problem...
I had some trouble with .NET CF 3.5, and then I wanted to reinstall it, but when I uninstalled it, and then tried to install it again, it didn't work.
It doesn't work through ActiveSync AND the cab. Do anyone know whats wrong here, or do I need to start a new thread?
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
hanjoster said:
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
Click to expand...
Click to collapse
My ActiveSync is okay, and the cab is from the microsoft site...
EDIT:I think something is wrong with my phone, but I don't want to do a Hard reset.
Installed no problem if you use your PC to get the CAB just pop in onto the memory card, bung it in your phone and using file explorer locate file and install onto your device. Easeeee
Even easier would be to use PIE and visit this site/thread and follow the link to download directly onto phone then do above in File Explorer
http://www.fileden.com/files/2008/7/...NET_CF_3.5.CAB
Thanks clb92
clb92 said:
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Click to expand...
Click to collapse
Thank you! Worked like a charm!
.NET 3.5 cab
bro,
.NET 3.5 is available as cab for direct installation on to your phone. Copy in to your phone / storage card and install in phone memory. I have installed on my HD stock rom and works fine. Here it is .... hope this will help, this is my first response to a mail and hope what i do is right. thanks Dr Shaheed
Hello all,
For some reason,activesync 4.5 is refusing to install applications: when I run an application installer on my PC, it comes up with :
"Error in Windows CE setup files: Application manager cannot install this application on your mobile device due to an error in the set-up file. reinstall and try again".
If I copy a cab file on the Htc touch HD and run it from there, everything works fine.
It seems that something has been corrupted in Activesync software.
So I tried to reinstall several times without the firewall and antivirus, after deleting all the temps files (%temp%) and deleting partnership documents files, also after deleting system32/RAPI.dll but the "Error in Windows CE setup files" still appears.
Does anybody knows about this specific problem? And how to fix it ?
Looking in forums for a week I didn't find that kind off troubble solved.
I have Activesync 4.5 on windows XP pack3 (before, activesync 4.2 worked very well with an XDA II- Qtek2020)
Thank you very much !