Develop Bugs

My First Brick..... :eek:

Hi guys. I have installed loads of ROMs onto my trusty hermes yet today, when trying to flash DuttyThroys Ultra Ultra Lite rom this happened: i downloaded ROM and installed it, it seemed to install fine, got to 100% and then came up with error message stating that Image File was corrupt. Now my hermes is stuck on the multicoloured bootloader screen?!?!?!? I have SPL 2.10. Hard SPL V7 HERM 100 IPL 1.04 (Dont know which of these is relevant to anythin?) .I have read the WIKI on repairing bricks but for my problem it says to reflash any nbh without radio. How is this possible if i cant get my pc to connect to my hermes???
Tried the method of turning off usb connection in active sync, removing battery, reconnecting to usb and running mitty (command SET 14 0) but nothing happens. Mitty says CMD error and active sync doesnt reopen the connection like the guide says! Man i hate this cuz i have now become one of those annoying noobs who has bricked their phone and hassles everyone for help!!!!
Have also tried to flash from sd card but nothing happens, flicks to white screen with LOADING... on it for 2 secons then flicks back to that wonderful multicoloured screen of joy!
Any help will be appreciated guys, cant live without my hermes!!!

Welcome to the fuc... nightmare world of the brick,i'mma in your same situation,now my Tytn is a piece of white stone,and it seems there's no reason to bring it back to live!
I can't stay without my Tytn i do a lot of things with it,Skype,SIP calls,Mail,Messenger,Memo,Internet......i'm in totally despair!!!

you should be able to just reflash a known good rom.

hfam95 said:
you should be able to just reflash a known good rom.
Click to expand...
Click to collapse
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??

IT could be interesting to make the minimal effort to go and read the wiki.
anyway:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Better than just cry.

MarcWhittle said:
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
Click to expand...
Click to collapse
With the microsd card...

right, its looking good. managed to begin flashing (bar has stopped for ages but having read this is normal im not so scared!) using the SD method. Where my device wasnt superCID i had to use the matching ROM (Orange) to my CID (which incidently i dont know, just downloaded both Orange ROMs).
While im waiting ill try and help you TETSUO! (Im a noob so probably cant!)
Is your device SuperCID??? tell me as much as you can about your device SPL etc

dude, if u read my post u would have seen that i have tried SD method once (sing Black 3.5 not ORANGE ROM), im not crying and im grateful for any help but when i get advice such as 'flash a rom' im gonna be pissed!

And i have read ALL the page on unbricking!!!

It worked!!
One more question, as i have installed a stock Orange ROM do i now need to reinstall HardSPL v7??

Are you on a Win XP or a Vista PC?

XP dude, sorry should have said! and thanks
i went into bootloader, still says 2.10 olipro but when i try to update to new ROM (Black X RC)and pick autodetect it says it says unknown version, use SSPL. it never used to say this so i assume i need to install HardSPL 7 again???

with the tri colour sceen, when you plug the usb cable in does it go from serial to USB ?
what OS have you got ?
just my 2 cents hope it helps.

dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!

sorry slooooooooooooooooow typing
good question hope there an answer,

MarcWhittle said:
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
Click to expand...
Click to collapse
just saw your post if ur device is hardspl you just need to supercid your device, If your spl is still showing hardspl and its coming as a error that normally happens to me as well just manually click spl 2.10 and tick (is it hardspl?}

To recap, i have now managed to flash a stock Orange ROM from SD card ( i think the reason it didnt work first time with SD is because device isnt SuperCID and i was trying to flash Black RC, soon as i used Orange ROM (my device is M3100) it worked. I am now back to a fully operational device. I wish to go back to Black but when i AutoDetect what bootloader i have it recommeds SSPL method. Before all my problems it would always automatically pick 2.10?? Does this mean i need to install HardSPL v7 again??

it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli

MarcWhittle said:
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
Click to expand...
Click to collapse
If you only flash the orange os.nb only then your hardspl wouldnt have changed so its safe to flash your device just manually choose.
If you want to flash hardspl again then do it on a precaution method

Mark,
First of all well done for getting yourself out of a hole. It seems quite difficult to ask for help these days without being shot to pieces even when you have first tried to help yourself by doing all the right things, which is more than can be said for some who come on here asking for help. So well done again.
Re your question, I would reflash Hard SPL anyway to be sure; however before you do that go to the Mr Vanx's guide on hard SPL (forgot the link but type in www.mrvanx.org and you should be taken there) and follow his instructions.
Good luck.
WB

Is it bricked?

Hello,
My model ID disappeared from my phone and now I cannot upload anything to it anymore.. It happened while updating to spl 1.40 Olinex... Does anyone have an idea how to upload a Rom without the need of a Device ID? The spl has the right number (I can see that in the Bootloader screen)...
Help?

xanh said:
Hello,
My model ID disappeared from my phone and now I cannot upload anything to it anymore.. It happened while updating to spl 1.40 Olinex... Does anyone have an idea how to upload a Rom without the need of a Device ID? The spl has the right number (I can see that in the Bootloader screen)...
Help?
Click to expand...
Click to collapse
This has happen to my phone as well can you go to bootloader mode and write down all the details here, we might have to contact ccmonex/olinex if its the same which happpen to me,

xanh said:
Hello,
My model ID disappeared from my phone and now I cannot upload anything to it anymore.. It happened while updating to spl 1.40 Olinex... Does anyone have an idea how to upload a Rom without the need of a Device ID? The spl has the right number (I can see that in the Bootloader screen)...
Help?
Click to expand...
Click to collapse
hey. dutty showed me this thread drop me a PM and we can try and fix this.
basically we'll first try to write your modelid back, if that doesn't work, then the last option is flash an SPL that ignores modelid.

cmonex said:
hey. dutty showed me this thread drop me a PM and we can try and fix this.
basically we'll first try to write your modelid back, if that doesn't work, then the last option is flash an SPL that ignores modelid.
Click to expand...
Click to collapse
thanks for responding so fast hope it isnt that bad like it was mines

Thanks for your quick reply's..
Here's my info:
MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
If I take out the battery I can see DIAM100 in the case...

xanh said:
Thanks for your quick reply's..
Here's my info:
MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
If I take out the battery I can see DIAM100 in the case...
Click to expand...
Click to collapse
just pm cmnonex and she will guide you

Another problem is with mtty..
When I start up the program and my phone in boot loader, then mtty crashes immediately when I press a button.. If I disconnect usb and reconnect it again I can type stuff in, but I can type in text without anything happening..
I'm starting to give up on this phone. Maybe I should start seeing it as a expensive pda..

i have the same issue .. me phone is freez then i have to remove battery out .. and restart again ... BUT ... everything is gone ... i cannot doing anything with it ....doesnt matter what kind the rom i upgrade .. still came bootloader ONLY ... i have read many thread about BRICK ... but nothing could help ......please any advise .... HELPP..... please

First of all :
Relax
Got a new diamond today and had the same issues.
What Windows OS are you using ? Do you use WDMC or Activesync ?
What is the driver version of the installed HTC Sync ?
As for mtty :
Next version of QMAT will be fine and will be much more stable than mtty.
As for bootloader :
1. Are you able to connect to mtty, and does it respond to command
"info 2" ?
If yes, fixing it should be no problem.
Contact cmonex, she will be able to help you.
If she isn't able, I and cmonex will figure out what to do next
Cya,
Viper BJK

viperbjk said:
First of all :
Relax
Got a new diamond today and had the same issues.
What Windows OS are you using ? Do you use WDMC or Activesync ?
What is the driver version of the installed HTC Sync ?
As for mtty :
Next version of QMAT will be fine and will be much more stable than mtty.
As for bootloader :
1. Are you able to connect to mtty, and does it respond to command
"info 2" ?
If yes, fixing it should be no problem.
Contact cmonex, she will be able to help you.
If she isn't able, I and cmonex will figure out what to do next
Cya,
Viper BJK
Click to expand...
Click to collapse
Thanks for quick reply VIPER ... my phone run well until i remove the battery ... everything turn out bad ....i use stock rom with is HK version 1.93.871.1
seem to me usb working fine... i can upgrade it ...but ... when is done ...only have bootloader ...First come with ::: DIAMOND TOUCH :: then black out ..when i press power button again .. coming only bootloader screen, no matter what rom i try ... still in bootloader mode.........please help .......

was a double message

viperbjk said:
First of all :
Relax
Got a new diamond today and had the same issues.
What Windows OS are you using ? Do you use WDMC or Activesync ?
What is the driver version of the installed HTC Sync ?
As for mtty :
Next version of QMAT will be fine and will be much more stable than mtty.
As for bootloader :
1. Are you able to connect to mtty, and does it respond to command
"info 2" ?
If yes, fixing it should be no problem.
Contact cmonex, she will be able to help you.
If she isn't able, I and cmonex will figure out what to do next
Cya,
Viper BJK
Click to expand...
Click to collapse
Hi Viper,
Thanks for your reply,
Unfortunately qmat crashes too when I try to send it a command... The version I use here is v395..
I'm using Activesync 4.5.. But this has been disabled...
After a while windows tells me that it finds an unknown device when in bootloader..
The OS is still working and is a HK version 1.93.871.1 as well..
Although I don't know if the OS part is fully ok, since after a hard reset the extra programs get installed and the phone crashes on installing opera...
Could it be that the bootloader itself is not functioning properly making all the tools crash?
My idea is to change the id of the phone to be able to upload a new SPL, and upload a original ROM... At least it should work again then... But I've been trying for more than a week now..
Thanks..

Xanh, which spl is now installed on your device ?
If it is the Hard Spl, try manualspl to reflash spl again. I guess SPL is broken.
Normally, you don't need to change the ID for that.
Changing the ID is only needed when flashing a ROM other than your
original one.
k3vin168 : Also try to reflash SPL. If you've done that and it did work, please contact me via PM. Then either your nand is bad or you need to change the bootmode.
Cya,
Viper BJK

SPL is 1.40.OliNex, but I don't need to change the ID, but it's missing since failing installing 1.40.OliNex SPL.. How does this manual SPL upload work?
No matter which update I try, it will always say that Device ID is wrong... I think NAND is somehow bad, since that's where the device ID is stored right?

xanh,
Could be that nand is bad. There are two regions where the device id is stored.
Memory and NAND. But both can be fixed using Hard SPL (MFG).
PM me, I'll try to help you out of your misery.

k3vin168 said:
Thanks for quick reply VIPER ... my phone run well until i remove the battery ... everything turn out bad ....i use stock rom with is HK version 1.93.871.1
seem to me usb working fine... i can upgrade it ...but ... when is done ...only have bootloader ...First come with ::: DIAMOND TOUCH :: then black out ..when i press power button again .. coming only bootloader screen, no matter what rom i try ... still in bootloader mode.........please help .......
Click to expand...
Click to collapse
Any progress on this one ?
If not, please PM me

xanh said:
SPL is 1.40.OliNex, but I don't need to change the ID, but it's missing since failing installing 1.40.OliNex SPL.. How does this manual SPL upload work?
No matter which update I try, it will always say that Device ID is wrong... I think NAND is somehow bad, since that's where the device ID is stored right?
Click to expand...
Click to collapse
he meant SSPL-Manual.exe from the hardspl thread, but I don't think that would fix mtty.
anyway, have you got my PM. if mtty is hopeless, the other route is what you need (flash SPL without modelid check via special no checking SSPL). I sent you all links and instructions.
(I'd rather not make the files public or all the noobs will start flashing random devices' roms.)
EDIT: I assume your OS is able to boot, but if not, then you need a different set of files, let me know

viperbjk said:
xanh,
Could be that nand is bad. There are two regions where the device id is stored.
Memory and NAND. But both can be fixed using Hard SPL (MFG).
PM me, I'll try to help you out of your misery.
Click to expand...
Click to collapse
for duttythroy, we could not write the modelid back to nand for some reason. lnb said success, then it was still not there in the flash when reading it out afterwards. so I just had him flash a "special" spl

k3vin168 said:
i have the same issue .. me phone is freez then i have to remove battery out .. and restart again ... BUT ... everything is gone ... i cannot doing anything with it ....doesnt matter what kind the rom i upgrade .. still came bootloader ONLY ... i have read many thread about BRICK ... but nothing could help ......please any advise .... HELPP..... please
Click to expand...
Click to collapse
what is your SPL version in tricolour screen?

cmonex said:
what is your SPL version in tricolour screen?
Click to expand...
Click to collapse
i use same as other 1.40 i try all VIPER try to help me out ... but all not working ....just stuck in splash screen ..i try all kind of ROM but still stuck ...i can i do ?? please help

Dead HTC P3300?

Sorry my english.
When I was putting a new room and asked to reboot never took on. Appears on screen:
IPL 3.13.0001
SPL 1.11.0000
GDM 02.94.90
OS 3.13.0.0
What to do now? How do the bootloader?

READ BEFORE POSTING
All´s is in the wiki.

ark666 said:
READ BEFORE POSTING
All´s is in the wiki.
Click to expand...
Click to collapse
I don't found anything about this problem, i have also got a ARTE100 with IPL 3.13, and i can start it or charge it on power...

I don´t understand what you say. I need help.
ark666 said:
READ BEFORE POSTING
All´s is in the wiki.
Click to expand...
Click to collapse

AsusA5EB said:
I don´t understand what you say. I need help.
Click to expand...
Click to collapse
AsusA5EB, your ARTEMIS is dead, i've exactly the same problem since 3 weeks.
You can try, to enter in bootloader : http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets

I think u should tell us what rom u flashed on your device in the first place.
Flash original rom to solve the issue, if not, u can use mtty to reset flash, and then install your original rom.
U guys already know that before flashing ANY rom besides your local CID, U MUST UNLOCK IT BY USING USPL.
Like i told u, all´s in the WIKI.

Hi there...
Do not worry your phone is not dead.
Read some things about USPL and than if it doesn't helps (and it won't, because I presume that you can't synchronize it with active sync), read something about MTTY and how to use it.
Be patient, read carefully and you'll make it.
By looking on your report from splash screen I can see that you have done USPL....but it went wrong.MTTY will solve your problem.
Spend some time reading and you'll do it.
Cheers
Z

zikizile said:
Hi there...
By looking on your report from splash screen I can see that you have done USPL....but it went wrong.
Click to expand...
Click to collapse
How can you tell USPL went wrong? I have the same IPL & SPL values in my device and everything looks good..

Ok, my phone is dead, the screen was break avec the power switch is dead....

ark666 said:
I think u should tell us what rom u flashed on your device in the first place.
Flash original rom to solve the issue, if not, u can use mtty to reset flash, and then install your original rom.
U guys already know that before flashing ANY rom besides your local CID, U MUST UNLOCK IT BY USING USPL.
Like i told u, all´s in the WIKI.
Click to expand...
Click to collapse
Hi,
Can you please tell me which ROM, RADIO do you use for ARTEMIS?
Thanks.

pls help me rhodium from t mobil doesnt work after upgrade to 6.5

i have a new htc from t mobile i bought it from craigslist and i was proced to hard spl by this version Rhodium-HardSPL_V2_00R3_185HSPL.zip then i have a message that mean theflashage is done then i make a update to Rhodium_AF|HTC Sense 2.5|LEO 1.43 when it finish the phone doesnt work its stoped at the white screen and stays there im too upsed help me plssss
modelid RHOD210

Ok, please come down...
Let me guide and help you...
First of all it is good that you have done Hard-SPL !
So, if you ROM went BAD and you can not do anything with your Rhodium...
There is a thing that you can do...
Please, follow those steps:
1. Take the cover of the cell phone, and search for the SOFT-RESET hole at the
RIGHT (other side from the VOLUME up/down).
2. Press the VOLUME DOWN, hold it and than SOFT-RESET.
It will take you to tree colour page for BootLoader screen.
3. Connect the device to the computer and try to Flash the ROM again
(or other ROM...).
Good Luck !!
Any help, just ask for it...

hi
Doesn't work from boot laoder too I think the is no radio flash because I can't see olinex in trial color just 5 or 6 Kobe of numr

i think the Hard SPL V2_00R3_185 file you downloaded is corrupted. i also downloaded today but couldn't extract it.

That s mean my device is brick dead

Try this: Download any GSM ROM from this forum (I like EnergyROM Leo), unzip it, and rename the .nbh to "RHODIMG.nbh" (without the quotes) if it isn't already called that. Copy that onto a MicroSD card (that is formatted to FAT32), and put that in your device. Now, go into the bootloader (power off the device, then press Power and Volume Down) then follow the instructions. Hopefully you just had a bad flash, and reflashing will solve it.

I will try but I think my phone is no radio flashed yet bcuz I can't see olinex in bootloader

correzzola said:
I will try but I think my phone is no radio flashed yet bcuz I can't see olinex in bootloader
Click to expand...
Click to collapse
Oh, if it doesn't say 0.85.OliNex, then you're still on a stock SPL, so my suggestion won't work. Try flashing the TMobile stock ROM for your device, and retry the HardSPL process (I would advise redownloading everything to ensure it's not corrupt).

So how canine flash t mObile stock rom

0.79.0000 stock SPL
i have this number in tricolor that mean my device is Relocker bcuz i m was make it by RhodiumSPLRelocker_079SPL.zip so now the phone dosnt accdpte flashage by Rhodium-HardSPL_V1_20R2_185HSPL.zip

this is a tricolor screen
RHOD210 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (LED) v4
turbo HW/TURBO SW
TP MFG DATA
504,522,816,847
808,192,195,192
201,849 calibrated

and this is my start page froozen its stay here with this nuber down left
B 80
R 3.45.25.14
P 61.27t.25.23u
D Energy ROM

correzzola said:
0.79.0000 stock SPL
i have this number in tricolor that mean my device is Relocker bcuz i m was make it by RhodiumSPLRelocker_079SPL.zip so now the phone dosnt accdpte flashage by Rhodium-HardSPL_V1_20R2_185HSPL.zip
Click to expand...
Click to collapse
have you tried reflash HardSPL_v1_20R_185HSPL yet?

It also might helps you guys...
I have managed a Full Package of Hard-Spl Oilnex that WORKS!
Download the Package here...
After download and UnRAR it, you will find anything you need for Hard-Spl and the Original Tutorial
For Flash and for Stock Restore...
Enjoy!

Calm down
First of all, posting 2 new threads and commenting in the NRG thread is called spamming, stop it. It'll be much easier for you to get the help you need by sticking with one thread (I imagine the Mod is going to do that for you). Second, blasting your email address and phone number publically is bad practice, you open yourself up for a massive email spam list and phone pranks. I suggest you go in and edit your post as soon as possible and delete that information out. Thirdly, I'm guessing English is not your native language, if it isn't I suggest typing the problem out in your own language, use a translation software (I think Google Docs has this feature), and post the translation into the forum. This will help with clarity of what's going on.
Now with all that said, my final suggestion would be to tell us exactly what you have done to the phone IN THE ORDER that you've done it, up until the point that you're at now. Also, being that you bought this phone off a craigslist (another mistake imho, I'd rather just spend the extra $$ for the warranty and piece of mind that it's from the manufacturer/carrier directly), tell us what condition the phone was in to begin with. Did it come with NRGZ ROM preloaded, or the stock ROM? Was it locking up before you decided to reflash? Did you read the Flashing Guide stickied to the top of this forum before flashing your phone? (If not, let this serve as a reminder to all other newbie's looking to flash to READ BEFORE YOUR MOD!)
We're going to try and help you, correzzola, but you need to take a breath and calm down. It's just a phone, granted a lot of money, but you're not suffering onto the point of bloodshed so it's all going to be okay.

From the look of it, you HardSPL'd, flashed a cooked ROM, then removed HardSPL. Huh... that's probably not good. Try flashing this T-Mobile US ROM (I'm assuming you have a T-Mobile US TP2) while in the bootloader, and see if that solves it (or even flashes at all). If that doesn't work, I'm honestly not 100% sure what to do next, since I've never heard of anyone doing this before.

Firstly, STOP SPAMMING THE BOARD!!! - you will only annoy people and make them less likely to help you.
Secondly, Read what Dave (the Tytn Guy) has posted and let us know what happens, any more problems post in this thread and I'll see what I can suggest.
Dave

itry this rom too but doesnt work TMOUS Stock Shipped Rom 1.20.531.4 (51986) WWE

i think this step is responsable of my probleme Stock/Shipped SPL by RhodiumSPLRelocker_079SPL.zip

stuck in the process

I have to flash my girlfriends diamond that she got second hand and happens to be a French device.
it is locked with pass and the shop owner doesn’t remember the pass. Willing to take back the device my girlfriend wants to keep it if possible.
Since it has a PW that I don’t know I only can put it in 3 color screen manually and then go on.
Doing so I get this 3 color info page:
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC- Diam STAGE_PVT v0x30
I thought I should HARD SPL but freezes on 0%
I read about that issue
tried actually every single SPL in the forum signed and unsigned but it still freezes always at 0%
[UPDATE] I also tried flashing the following ROMs so far:
Eto.X 1.3 WWE
RUU_Diamond_HTC_GER_1.93.407.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
[2nd UPDATE]
I have the device now rested manually (factoryy default )since Vicai was kind enough to tell me how this works but still there no connection between pc and ppc.
this is kind of strange for me since my pc recognizes my touch pro without problems.
[3rd UPDATE]
now it the diamond is listed finaly in windows explorer but still any attempt to do a ROM update or HRD SPL gets STUCK at 0%
[4th UPDATE]
I tried flashing RUU_Diamond_HTC_FRA_1.93.406.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
same thing happens now again stuck at 0%
now I am kind a running out of ideas and would appreciate a little help,..
thx,
s.

dissapointment
I am realy trying to get some help here.
would somebody help me out?
do I do something wrong or am I looking for advice at the wrong place?
s.

well, actually i think there are alot of helpfull ppl round here, but they can't come up with a good solution for your problem. I personally have no clue why you can't run hardSPL.
What i do know is that since the device is not hardSPL'ed it is not possible to flash any rom (even official ones) in another language than the one it came with (French).
What you could try however is flashing an official French ROM, you can download it from here, (look for wiki pages for diamond) or from the official HTC site, and then try to run hardSPL again.
Good luck and i hope things gonna work out for ya.

Nirak said:
What you could try however is flashing an official French ROM, you can download it from here, (look for wiki pages for diamond) or from the official HTC site, and then try to run hardSPL again.
Good luck and i hope things gonna work out for ya.
Click to expand...
Click to collapse
thats what I am going to do, I just did't try so far because my french is realy bad but I allready downloaded the french rom to try.
thank you,
s.

mm I think the only solution is flash a rom original French and then try to put HSPL, I use 1:40 OliNex