Related
I have a T-mobile ppc phone. I have just upgraded to the new WM 2003 rom. What are the correct GPRS settings for this new rom?
Rom = a.30.09
Radio = R6.18.00
Thanks
Raymond
Ok here you go:
Select a modem:
Cellular Line (GPRS)
Next
Access Point:
internet2.voicestream.com
or
wap.voicestream.com
internet3.voicestream.com
Next
Leave them all blank.
User Name:
Password:
Domain:
Finish
HTH
Hi,
I flashed my UK o2 xda with the SD card method to 2003, but have gone back to 2002(autoconfig) for now as I didnt know the GPRS settings. Does anyone have them for UK O2 network as 2003 ran really well
thanks,
maltloaf
Shouldn't people LOOK before they leap? :roll:
MrDollyMaker
I tried all official and coocked WM6 ROMs, none of them connect to my T-Mobile GPRS !!!!
Before the Official rom released I was using vp3G ROM, Sleuth ROM and most of the ROMS available in this website without any problems... Once I installed the official WM6 there is no internet using GPRS conection. Then I tried different WM6 roms but same problem
here is my settings
T-Mobile USA
wap.voicestream.com
Radio: 1.48
Please help.
kokowawa said:
I tried all official and coocked WM6 ROMs, none of them connect to my T-Mobile GPRS !!!!
Before the Official rom released I was using vp3G ROM, Sleuth ROM and most of the ROMS available in this website without any problems... Once I installed the official WM6 there is no internet using GPRS conection. Then I tried different WM6 roms but same problem
here is my settings
T-Mobile USA
wap.voicestream.com
Radio: 1.48
Please help.
Click to expand...
Click to collapse
The Official Rom comes with Cingular Proxy preconfigured. Some where in the Programs screen you have a utility to disable the default Proxy. That could be the reason for no GPRS on your 8525
surveyganga said:
The Official Rom comes with Cingular Proxy preconfigured. Some where in the Programs screen you have a utility to disable the default Proxy. That could be the reason for no GPRS on your 8525
Click to expand...
Click to collapse
I tried to disable the proxy then soft reset, but still same problem
You need to put in the Tmobile internet settings.
Has anyone been able to get MMS working on Three Australia??
I've been trying for the last few days and it's work with pretty much all other customized roms.. but this one is giving me issues? Maybe something to do with device identity on three servers or maybe this new version of arcsoft broke something???
I'm 100% certain settings are correct. I've tried with network setup wizard, and the following:
Gateway: 10.176.57.25
Port: 8799
Server address: http://mmsc.three.net.au:10021/mmsc
Connect via: (3 services connection, whatever it's called?) Mine is MY ISP
also tried with:
Server address: http://mmsc.three.com.au:10021/mmsc
No juice at all.. anyone else want to confirm on three Australia?? Oh and sorry about making a new thread for this.. I tried posting this in schaps thread but no response many times. I'm just looking for ANYONE to test and confirm this.
Also on Three Australia, running Schaps 3.54c. I don't usually use mms but just tried to send and it didn't work, using settings from the network wizard (checked against what I had previously sourced from aussie3g)
So it's not just you....
bigruss said:
Also on Three Australia, running Schaps 3.54c. I don't usually use mms but just tried to send and it didn't work, using settings from the network wizard (checked against what I had previously sourced from aussie3g)
So it's not just you....
Click to expand...
Click to collapse
Hey thanks for that.. just wanted to make sure I wasn't going crazy... It annoys me a bit, because I'm really REALLY loving this rom.. besides the mms thing, not one glitch and has everythign i need...
im running 3.54c and i am getting MMS with 3 Australia no issues at all. the settings are correct but as it has been posted before on other sites, you have to ring 3care and report a fault. tell them mms doesnt work just play along with them with regards to OS (stock 3 ROM) and settings.
they need to reset your 'individual profile' on the server. i had to get this done as MMS were not sending at all. it took about 3-4 days but i got fixed and MMS are working fine, send and receieve with only a minimal delay (2min max) between send and recieve.
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
.... on another note 3.60a beta did not work with 3australia and the MMS settings, so i had to go back to 3.54c.....
Drooch
drooch said:
im running 3.54c and i am getting MMS with 3 Australia no issues at all. the settings are correct but as it has been posted before on other sites, you have to ring 3care and report a fault. tell them mms doesnt work just play along with them with regards to OS (stock 3 ROM) and settings.
they need to reset your 'individual profile' on the server. i had to get this done as MMS were not sending at all. it took about 3-4 days but i got fixed and MMS are working fine, send and receieve with only a minimal delay (2min max) between send and recieve.
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
.... on another note 3.60a beta did not work with 3australia and the MMS settings, so i had to go back to 3.54c.....
Drooch
Click to expand...
Click to collapse
That's really strange... because the simcard and network is fine, i've tested it in other phones without issue.. i've been tru hell with mms before where it wouldn't send and then three did reset the profile and all was good. but this is a different issue and it's strange how it didn't work in the beta but it's working for you in 3.54c as techincally their both the same, it's just 3.60a beta is based on a new build of wm6.... and both are using the same version of arcsoft as well.
drooch said:
im running 3.54c and i am getting MMS with 3
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
Drooch
Click to expand...
Click to collapse
Oh and one other thing I noticed... if you change to wap 2.0 so does the port number from 8799 (which it's supposed to be) to 8080 (which is the default for wap 2.0). I would double check your settings and see what their set to because it's not making much sense...
thats why the 3.60a ROM doesnt work.... it auto selects the port based on WAP version. the 3.54c version does not do this and therefore still works
Drooch
argh, why did I test this for you?! It's bugging me too now. I have the same situation where the port changes based on the wap version, running 3.54c (just checked in case I was being really stupid)
so it looks like we either have the wrong port or the wrong wap....
strange that it is working for one person.
drooch said:
thats why the 3.60a ROM doesnt work.... it auto selects the port based on WAP version. the 3.54c version does not do this and therefore still works
Drooch
Click to expand...
Click to collapse
Well actually 3.54c does do this (change the port to 8080 on wap2.0). Everyone else's post in here confirm this.
And too be honest.. i don't think that's what's causing the issues, because well wap1.2 should still work...
yes it does auto select a port number when u select the Wap version but if u overwrite it, it does not revert back to the original number, so u can select wap 2.0 and then overwrite the value back to 8799 and select ok. it should then stay on that port number.
I work in the industry and i must say that this issue only arises on cooked ROMS. i dont know if this will help but i have attached a hutchison file that was from the extrom of the dopod rom. i dont know what it contains but it may help
Drooch
drooch said:
yes it does auto select a port number when u select the Wap version but if u overwrite it, it does not revert back to the original number, so u can select wap 2.0 and then overwrite the value back to 8799 and select ok. it should then stay on that port number.
I work in the industry and i must say that this issue only arises on cooked ROMS. i dont know if this will help but i have attached a hutchison file that was from the extrom of the dopod rom. i dont know what it contains but it may help
Drooch
Click to expand...
Click to collapse
hmm.. well i'm running 3.54c and i can confirm.. if you change the port then hit ok.. go back into the settings and you'll see the port / wap version has been changed automatically for you...
well i dont know why thats happening.
did you set up a new configuration or overwrite the sample one??
ive been testing my phone since i saw this post and for some reason, if i select WAP 2.0 it will select Port 8080. i then overwrite it to 8799 and select ok.... never changes back to 8080 (unless i select WAP 2.0 again)
same happens with me, if I overwrite it will revert to the original. This happens with new and existing mms servers
drooch said:
well i dont know why thats happening.
did you set up a new configuration or overwrite the sample one??
ive been testing my phone since i saw this post and for some reason, if i select WAP 2.0 it will select Port 8080. i then overwrite it to 8799 and select ok.... never changes back to 8080 (unless i select WAP 2.0 again)
Click to expand...
Click to collapse
Are you sure your running 3.54c because outside of your post, no one else can confirm what your reporting...
Seems a bit strange...
i can confirm i am running -
ROM Version: Schap's 3.54c
ROM date: 07/05/07
Radio Version: 1.51.00.10
Protocol Version: 32.84.7020.20H
i can confirm also that this ROM can accept MMS send and recieve using 3australia with the settings that were mentioned in this post. i work for 3 and it took me 6 days of 3care communication to relsove the issue... they changed settings on their side on *my* account and now it works. the phone does not revert back to the 8080 port on *my* dopod838pro i could only get mms to work if i
a) installed the hutchison cab i posted before
b) DID NOT run the network wizard that cam with the ROM
c) entered the settings manually for connection and for MMS
d) overwrote the sample MMS settings
Drooch
drooch said:
i can confirm i am running -
ROM Version: Schap's 3.54c
ROM date: 07/05/07
Radio Version: 1.51.00.10
Protocol Version: 32.84.7020.20H
i can confirm also that this ROM can accept MMS send and recieve using 3australia with the settings that were mentioned in this post. i work for 3 and it took me 6 days of 3care communication to relsove the issue... they changed settings on their side on *my* account and now it works. the phone does not revert back to the 8080 port on *my* dopod838pro i could only get mms to work if i
a) installed the hutchison cab i posted before
b) DID NOT run the network wizard that cam with the ROM
c) entered the settings manually for connection and for MMS
d) overwrote the sample MMS settings
Drooch
Click to expand...
Click to collapse
Hmm.. thanks for all your help drooch... but i just don't see how it makes sense. I think you must be the exception. I know if I change the port to 8799 when i hit ok, and go back into the settings it's reading wap 1.2.
Also the network wizard just automates the manual input of settings, and i've looked over all the settings and can not find any differences between those and the ones listed here.
Not sure what the cab does either, but i installed it with out any luck and I've also set many times 3mms to the default connection for mms settings but it hasn't made any difference..
there is a glitch somewhere between us on three and this customized rom. I just wish I could find it already because I love the rom.
Network Wizard
I've had the same problem of WAP 2.0 selection defaulting to Port 8080 and it appears to be associated with running the Network Wizard.
I did a hard reset, entered the network settings manually then did the MMS settings - Port 8799, WAP Version 2.0, and everything worked.
So at least for 3 Australia, the advice is, don't run the network wizard, input your operator settings manually.
Cheers
finally someone that can back me up!
i assumed it was the network wizard but why??? (very weird!)
so to use 3MMS use the settings that were posted in the first post BUT DO NOT run network wizard, you must hard reset if u have used it.
Good luck,
Drooch
Ahh.. well thats some damn useful information!!!
I can't quite hard-reset my phone rite now either to test it, cuz I got too much stuff I need, but definitely handy info!!! I wonder if this applies to all roms??
And thanks drooch for your persistence In the end all we want is for stuff to work... looks like we may be getting it afterall
Hello,
I have searched hours to have a blackberry client working on my Artemis :
- have tried many versions
- have tried different ROMs from Meschle
Everytime I have same result I cannot connect to Blackberry and the black berry client does not show any service...
Anyone have HTC P3300 (Artemis) with working Blackberry client?
Please advise I I really need this for my work...
My current configuration :
HTC Artemis P3300 unlocked
Meschle's ROM 4.02 Lite w CUBE
I live in the czech republic and my SIM card is a T-Mobile one with all services activated (BlackBerry + Edge...)
Thanks
---
Jeremy
look in this thread
http://forum.xda-developers.com/showthread.php?t=369269
Dont work
Thanks for reply but I already read this post among many others it does not work on my Artemis... still cannot connect or get an IP...
How to know which version of radio i have? is it on boot screen?
Thanks
I have an Artemis and I am using the blackberry functionality successfully. Here is a site where you can find all information about HTC and blackberry:
http://sems.org/entry.asp?ENTRY_ID=276
Under Start-Settings-System-Device Information you can find all information required about the OS etc. of your Artemis. I use the 03.07.90 Radio version and it works fine for me. I use the Artemis Touch 3.01 Rom. Apparently nobody has been able to run the blackberry connect under WM 6.01.
For me it was crucial, to ask your IT department to re-activate my Blackberry account. Before, nothing worked and since then, it is quite stable. I use 4.0.0.97.
Hope this helps.
WM5?
Thanks a lot for reply.
So are you advising me to flash my device with a ROM containing WM5?
I would do it if I find that I can use BlackBerry as this is very important for me...
Are there any big differences between WM5 and WM6? Would I lack anything by downgrading ROMs?
Currently I have Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Lite)
Thanks again.
---
Jeremy
As mentioned, Blackberry connect does not work with WM6.1, but does with WM6. I am using
Artemis Touch 3.01 Rom
which is based on WM6.
All OK
So I downgraded ROM from 4.02 Lite WM6.1 to 3.01 Lite ...
Then I installed BB Connect (same version as you as all others don't work with this ROM and my device)
Finally I got the everything working!!! What a releaf !!!
Thanks a lot!!
Nevertheless I am looking forward for next ROM from Meschle which will be compatible with newer releases of the BB Client...
Best regards,
P.S. I also tweaked registry in order to save my corporate emails to storage card instead of main memory!!
P.S.2 : Didn't you notice that your device is slower after installation of black berry services?
How did you do the tweak of the registry?
In some instances, my Artemis has become slower, sometimes it even seems, it hangs up. But it seems that this is the price to pay.
BTW, HTC and RIM have now entered into a strategic partnership and all future HTC models should be automatically provided with Blackberry connect. Thus we might see an updated version of Blackberry connect sonn, that also works with WM6.1.
...
Hey,
Thanks for update...
I have modified the registry this way :
1- add "PropertyPath" value="\Storage Card\Mail" datatype="string"
to this place in Registry : HKLM\System\Inbox\Settings
*** Note : Do not put quotes in the value... ***
*** You can edit registry with many editors such as PHM or TRK ***
2- Create a folder Mail in on your storage card
3- Copy whole content of \Windows\Messaging in the new created folder \Storage Card\Mail
4- Finally after you do this make sure that you take away the messaging today plugin from today screen (important... you can put it back after soft reset)
5- Soft Reset
-----------------------------
I have another problem now with the BB Connect. Since I installed it everything is fine just I have to unlock my phone every 30 min using a password. This is very annoying as you have to open keyboard and enter password everytime you dont use your phone for some time...
Do you have this as well?
Is there any way to disable locking of phone?
Thanks
Solved
I have solved the password issue :
I downloaded MEMMAID application which is able to manage system services and I manually stopped the BlackBerry Security service.
Be careful though this is a powerful piece of software which can really harm your device if misused...
advice : do not change the service startup type (auto/manual) just stop the service after each Soft Reset otherwise you will not be able to use your device after soft reboot.
I managed to get my Blackberry Connect working on my P3300. Here are the details:
HTC P3300 (purchased in India)
Artemis Touch 4.02 ROM
Radio 3.08.90
Blackberry Connect Version 4.0.0.97
Device Id set to HTC_P3300
HKLM\System\Version\AKU = .0.3.1
Carrier = Airtel India (http://www.airtel.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYou/BlackBerry/)
Connecting to BES on Exchange at company workplace.
I see email, calendar, notes and contacts synced from my Outlook.
Thanks to all for the data/input on versions/radios, etc.
tip
Hey,
I updated ROM (6.1) and for some reason the connection would last few seconds and then I would loose IP address...
Long time I didn't know what to do and even going back to original working ROM it didn't work...
Finally, I deleted my internet connection and soft reset.. HOP the connection was up and running again
So now I will add again my internet GPRS connection (for www and other games/weahter...) and will see... Probably I have to setup some sort of exceptions in the lists to prioritize BlackBerry somehow...
Cheers.
BTW, BlackBerry works with WM 6.1 ! Also there is new version 4.0.0.100 which works as well for me.
Hallo Desire Fans,
I'm using T-Online Desire but with O2 Online-Package M going online into Internet. With Android 2.1 and actually APN anything fits perfect - browsing through the internet.
Some days after updating Anroid 2.2 I recognize that the browser don't reach any page. I use an early update 2.2 - not specific one from o2, t-online, vodafone...
I use actually APN Data sent by o2. In the settings the APN Connect shows connected (Verbunden) but in dolphin and other browsers nothing happens.
O2's solution is to reset the Desire to Firmware 2.1 - but I wish to use Android 2.2 Do anyone of you know about this problem or places to look for fixing it?
Thanks for any hints going to internet.
Ciao, Matthias
vatel65 said:
Hallo Desire Fans,
I'm using T-Online Desire but with O2 Online-Package M going online into Internet. With Android 2.1 and actually APN anything fits perfect - browsing through the internet.
Some days after updating Anroid 2.2 I recognize that the browser don't reach any page. I use an early update 2.2 - not specific one from o2, t-online, vodafone...
I use actually APN Data sent by o2. In the settings the APN Connect shows connected (Verbunden) but in dolphin and other browsers nothing happens.
O2's solution is to reset the Desire to Firmware 2.1 - but I wish to use Android 2.2 Do anyone of you know about this problem or places to look for fixing it?
Thanks for any hints going to internet.
Ciao, Matthias
Click to expand...
Click to collapse
Are you rooted..?
If flash my rom..its based on the o2 froyo 2.2 if not..and also don´t want to root.... flash the original from the german o2 site
Also i read a tip...: let the apn typ (last thing of apn settings) free
with kind regards..Alex
Not sure ;-) What's 'rooted...'?
The phone system is booted and SIM.. is in use.
I don't use froyo. The last update takes 2 day's to reorganize the lost of Data. Next updating is the last way. I know that same Update and using of APN... fit's by a friend with o2. The only different is, that my device is from T-Mobile.
@ Alex: Thank's for help.
I use original o2 APN settings and this one are without last entry (APN-Type), this hint you heard is correct.
Is there anyone using T-Mobile Phone with o2 and updating to Android 2.2?
Connections ?
hm - there MUST anything other wrong:
because on this way you cant root your phone
And on my phone it works perfect !
Name: o2-Internet
APN: o2surf
Proxy:
Port:
Nutzername:
Password:
Server:
MMSC: http://10.81.0.7:8002
MMS-Proxy: 82.113.100.005
MMS-Port: 8080
MMS-Protokoll Wap2.0
MCC 262
MNC 07
Authentifizierungstyp: nicht festglegt
APN-Typ: nicht festglegt
OK my setting too - only APN: internet (given by o2) but both setting didn't work.
need help with setting up the apn
i have got a desire with 2.2 onit from 3uk network. i am trying to setup new apn on it. i am able to save the apn settings, but unable to get the radio button nxt to it to select it to be in use. i have added multiple apn settings, all with no radio button nxt to it. i have restored the apn settings to default, rebooted, restored entire phone to factory settings, added apn settings again, tried all combination, but no joy.
i had a bit of success on adding the apn and deleting muti-multiple times, but since i had to reset the phone that was delleted again. now agin no radio button.
Can any one post any solution on this plz.
HTC O2 NEO
HTC AT&T 8525
HTC DIAMOND & DESIRE (current)
Soon SAMSUNG OMNIA 7