MMS on Three Australia with Schaps rom's - 8525, TyTN, MDA Vario II, JasJam ROM Development

Has anyone been able to get MMS working on Three Australia??
I've been trying for the last few days and it's work with pretty much all other customized roms.. but this one is giving me issues? Maybe something to do with device identity on three servers or maybe this new version of arcsoft broke something???
I'm 100% certain settings are correct. I've tried with network setup wizard, and the following:
Gateway: 10.176.57.25
Port: 8799
Server address: http://mmsc.three.net.au:10021/mmsc
Connect via: (3 services connection, whatever it's called?) Mine is MY ISP
also tried with:
Server address: http://mmsc.three.com.au:10021/mmsc
No juice at all.. anyone else want to confirm on three Australia?? Oh and sorry about making a new thread for this.. I tried posting this in schaps thread but no response many times. I'm just looking for ANYONE to test and confirm this.

Also on Three Australia, running Schaps 3.54c. I don't usually use mms but just tried to send and it didn't work, using settings from the network wizard (checked against what I had previously sourced from aussie3g)
So it's not just you....

bigruss said:
Also on Three Australia, running Schaps 3.54c. I don't usually use mms but just tried to send and it didn't work, using settings from the network wizard (checked against what I had previously sourced from aussie3g)
So it's not just you....
Click to expand...
Click to collapse
Hey thanks for that.. just wanted to make sure I wasn't going crazy... It annoys me a bit, because I'm really REALLY loving this rom.. besides the mms thing, not one glitch and has everythign i need...

im running 3.54c and i am getting MMS with 3 Australia no issues at all. the settings are correct but as it has been posted before on other sites, you have to ring 3care and report a fault. tell them mms doesnt work just play along with them with regards to OS (stock 3 ROM) and settings.
they need to reset your 'individual profile' on the server. i had to get this done as MMS were not sending at all. it took about 3-4 days but i got fixed and MMS are working fine, send and receieve with only a minimal delay (2min max) between send and recieve.
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
.... on another note 3.60a beta did not work with 3australia and the MMS settings, so i had to go back to 3.54c.....
Drooch

drooch said:
im running 3.54c and i am getting MMS with 3 Australia no issues at all. the settings are correct but as it has been posted before on other sites, you have to ring 3care and report a fault. tell them mms doesnt work just play along with them with regards to OS (stock 3 ROM) and settings.
they need to reset your 'individual profile' on the server. i had to get this done as MMS were not sending at all. it took about 3-4 days but i got fixed and MMS are working fine, send and receieve with only a minimal delay (2min max) between send and recieve.
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
.... on another note 3.60a beta did not work with 3australia and the MMS settings, so i had to go back to 3.54c.....
Drooch
Click to expand...
Click to collapse
That's really strange... because the simcard and network is fine, i've tested it in other phones without issue.. i've been tru hell with mms before where it wouldn't send and then three did reset the profile and all was good. but this is a different issue and it's strange how it didn't work in the beta but it's working for you in 3.54c as techincally their both the same, it's just 3.60a beta is based on a new build of wm6.... and both are using the same version of arcsoft as well.

drooch said:
im running 3.54c and i am getting MMS with 3
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
Drooch
Click to expand...
Click to collapse
Oh and one other thing I noticed... if you change to wap 2.0 so does the port number from 8799 (which it's supposed to be) to 8080 (which is the default for wap 2.0). I would double check your settings and see what their set to because it's not making much sense...

thats why the 3.60a ROM doesnt work.... it auto selects the port based on WAP version. the 3.54c version does not do this and therefore still works
Drooch

argh, why did I test this for you?! It's bugging me too now. I have the same situation where the port changes based on the wap version, running 3.54c (just checked in case I was being really stupid)
so it looks like we either have the wrong port or the wrong wap....
strange that it is working for one person.

drooch said:
thats why the 3.60a ROM doesnt work.... it auto selects the port based on WAP version. the 3.54c version does not do this and therefore still works
Drooch
Click to expand...
Click to collapse
Well actually 3.54c does do this (change the port to 8080 on wap2.0). Everyone else's post in here confirm this.
And too be honest.. i don't think that's what's causing the issues, because well wap1.2 should still work...

yes it does auto select a port number when u select the Wap version but if u overwrite it, it does not revert back to the original number, so u can select wap 2.0 and then overwrite the value back to 8799 and select ok. it should then stay on that port number.
I work in the industry and i must say that this issue only arises on cooked ROMS. i dont know if this will help but i have attached a hutchison file that was from the extrom of the dopod rom. i dont know what it contains but it may help
Drooch

drooch said:
yes it does auto select a port number when u select the Wap version but if u overwrite it, it does not revert back to the original number, so u can select wap 2.0 and then overwrite the value back to 8799 and select ok. it should then stay on that port number.
I work in the industry and i must say that this issue only arises on cooked ROMS. i dont know if this will help but i have attached a hutchison file that was from the extrom of the dopod rom. i dont know what it contains but it may help
Drooch
Click to expand...
Click to collapse
hmm.. well i'm running 3.54c and i can confirm.. if you change the port then hit ok.. go back into the settings and you'll see the port / wap version has been changed automatically for you...

well i dont know why thats happening.
did you set up a new configuration or overwrite the sample one??
ive been testing my phone since i saw this post and for some reason, if i select WAP 2.0 it will select Port 8080. i then overwrite it to 8799 and select ok.... never changes back to 8080 (unless i select WAP 2.0 again)

same happens with me, if I overwrite it will revert to the original. This happens with new and existing mms servers

drooch said:
well i dont know why thats happening.
did you set up a new configuration or overwrite the sample one??
ive been testing my phone since i saw this post and for some reason, if i select WAP 2.0 it will select Port 8080. i then overwrite it to 8799 and select ok.... never changes back to 8080 (unless i select WAP 2.0 again)
Click to expand...
Click to collapse
Are you sure your running 3.54c because outside of your post, no one else can confirm what your reporting...
Seems a bit strange...

i can confirm i am running -
ROM Version: Schap's 3.54c
ROM date: 07/05/07
Radio Version: 1.51.00.10
Protocol Version: 32.84.7020.20H
i can confirm also that this ROM can accept MMS send and recieve using 3australia with the settings that were mentioned in this post. i work for 3 and it took me 6 days of 3care communication to relsove the issue... they changed settings on their side on *my* account and now it works. the phone does not revert back to the 8080 port on *my* dopod838pro i could only get mms to work if i
a) installed the hutchison cab i posted before
b) DID NOT run the network wizard that cam with the ROM
c) entered the settings manually for connection and for MMS
d) overwrote the sample MMS settings
Drooch

drooch said:
i can confirm i am running -
ROM Version: Schap's 3.54c
ROM date: 07/05/07
Radio Version: 1.51.00.10
Protocol Version: 32.84.7020.20H
i can confirm also that this ROM can accept MMS send and recieve using 3australia with the settings that were mentioned in this post. i work for 3 and it took me 6 days of 3care communication to relsove the issue... they changed settings on their side on *my* account and now it works. the phone does not revert back to the 8080 port on *my* dopod838pro i could only get mms to work if i
a) installed the hutchison cab i posted before
b) DID NOT run the network wizard that cam with the ROM
c) entered the settings manually for connection and for MMS
d) overwrote the sample MMS settings
Drooch
Click to expand...
Click to collapse
Hmm.. thanks for all your help drooch... but i just don't see how it makes sense. I think you must be the exception. I know if I change the port to 8799 when i hit ok, and go back into the settings it's reading wap 1.2.
Also the network wizard just automates the manual input of settings, and i've looked over all the settings and can not find any differences between those and the ones listed here.
Not sure what the cab does either, but i installed it with out any luck and I've also set many times 3mms to the default connection for mms settings but it hasn't made any difference..
there is a glitch somewhere between us on three and this customized rom. I just wish I could find it already because I love the rom.

Network Wizard
I've had the same problem of WAP 2.0 selection defaulting to Port 8080 and it appears to be associated with running the Network Wizard.
I did a hard reset, entered the network settings manually then did the MMS settings - Port 8799, WAP Version 2.0, and everything worked.
So at least for 3 Australia, the advice is, don't run the network wizard, input your operator settings manually.
Cheers

finally someone that can back me up!
i assumed it was the network wizard but why??? (very weird!)
so to use 3MMS use the settings that were posted in the first post BUT DO NOT run network wizard, you must hard reset if u have used it.
Good luck,
Drooch

Ahh.. well thats some damn useful information!!!
I can't quite hard-reset my phone rite now either to test it, cuz I got too much stuff I need, but definitely handy info!!! I wonder if this applies to all roms??
And thanks drooch for your persistence In the end all we want is for stuff to work... looks like we may be getting it afterall

Related

HTC S621 Released in Canada on Rogers

See www.rogers.com/wireless
then head to the store...
Rogers have released the Excalibur as the S621 here. I hope to get a unit later in the week. All reports indicate its identical to the HTC model & runs WM5.
I've gotten my S621 and it is the same as the s620. I paid the std. 20GBP to unlock it from imei-check.co.uk.
The only issue is that the SDA Application unlock does not work.. it gives the error "The phone is unlockable" and you can't modify the registry becuase the sda application unlock does not work.
I haven't attempted to flash the ROM yet as I don't have a way of backup up my current ROM in case it doesn't work or I don't like it.
Well i will be the first to ask if anyone who gets this, can u find the apps for rogers radio and video on demand? This will be huge for all HSPDA Users on rogers here in this forum
I'm not a rogers customer so I wouldn't be able to use those feature. I'm using the phone with Fido.
I reflashed my phone with the excalibur rom.
kypreos:
but you have the rogers rom on it? hmmm is there away the rom could even just be dumped somewhere and I try to figure out how to get the apps? I may just be something in the extended rom or and the initial setup.
@anyone
Now that Rogers has some more branded WM phones, can you guys tell me if you can Send AND Receive MMS? I know it maybe different with a smartphone...just trying to grab some hope towards it.
>Now that Rogers has some more branded WM phones, can you guys tell me >if you can Send AND Receive MMS? I know it maybe different with a >smartphone...just trying to grab some hope towards it.
I can send from my HTC S620 but when people reply to it or send me MMS back I get msg expired on server error
I get the same message has expired error when ppl send me MMS, I get the notification but when I click on download it gives me the error.
y2whisper said:
kypreos:
but you have the rogers rom on it? hmmm is there away the rom could even just be dumped somewhere and I try to figure out how to get the apps? I may just be something in the extended rom or and the initial setup.
@anyone
Now that Rogers has some more branded WM phones, can you guys tell me if you can Send AND Receive MMS? I know it maybe different with a smartphone...just trying to grab some hope towards it.
Click to expand...
Click to collapse
Can you tell me how to back up the ROM? if it can be done? I plan to flash my S621 tomorrow.. !
What I like about the Rogers version is, there's no ugly Rogers logo silkscreend on it.
it's basically the unbranded HTC phone.
Henchman said:
What I like about the Rogers version is, there's no ugly Rogers logo silkscreend on it.
it's basically the unbranded HTC phone.
Click to expand...
Click to collapse
yes, I but the startup sound is rather loud aye!!?? I also didnt like the layout of the "desktop" where the icons are for the apps. HTC has a folder called "Office" for the clearvuw apps.
I just flashed my S621 this morning. Nice. I took a copy of the Rogers Desktop and sound from the Windows Folder first.
Just waiting on a WM6 build to be released. A few more weeks I guess.
psxp said:
Can you tell me how to back up the ROM? if it can be done? I plan to flash my S621 tomorrow.. !
Click to expand...
Click to collapse
Yeah I am looking for a way, since there are varried ways for each type of unit. for now I would ask that you look in the windows folder for anything relating to the rogers applications.
This thread in the wiki may also be of help, but i can't make head or tails of it
http://wiki.xda-developers.com/index.php?pagename=DumpRom
Took a copy of the rogers desktop? what is on it?
sucks when everyone u know that has a dash has the t-mobile version
y2whisper said:
Yeah I am looking for a way, since there are varried ways for each type of unit. for now I would ask that you look in the windows folder for anything relating to the rogers applications.
This thread in the wiki may also be of help, but i can't make head or tails of it
http://wiki.xda-developers.com/index.php?pagename=DumpRom
Took a copy of the rogers desktop? what is on it?
sucks when everyone u know that has a dash has the t-mobile version
Click to expand...
Click to collapse
I didnt see any rogers specific apps in the Windows folder. I copied the .XML for the 2 rogers home Screens and also some sounds. The Rogers sound.
One of the reasons I wanted to flash the phone.. when turning it on it makes a LOUD rogers sound with the Carrier animation. Nice, but you cant change it or turn it off.
Anyway, the phone is Flashed as the HTC S620 now, and I will sell my original S620
what the ROM ver you flashed in it ?
What is your ROM ver now ? is it lower than Rogers Branded ? what radio ver on it now ?
also can you upload it if its higher ver, or pm me , if you dont mind
Hitec
Whats in your Rogers Applications folder ? Mine ie empty when I received my unit ?
psxp said:
I didnt see any rogers specific apps in the Windows folder. I copied the .XML for the 2 rogers home Screens and also some sounds. The Rogers sound.
One of the reasons I wanted to flash the phone.. when turning it on it makes a LOUD rogers sound with the Carrier animation. Nice, but you cant change it or turn it off.
Anyway, the phone is Flashed as the HTC S620 now, and I will sell my original S620
Click to expand...
Click to collapse
Yeah Cingul....AT&T has done that to their newer Roms as well but it was the sound of a jet flying.
The search continues for video and radio on demand apps
Scott_LaPointe said:
Whats in your Rogers Applications folder ? Mine ie empty when I received my unit ?
Click to expand...
Click to collapse
sorry, I cant remember. I booted it only twice, then flashed it.
I sold my original HTC S620 last night. Using the Rogers S621 as S620
Has anyone figured out the message has expired problem? I can send mms no problem, but cannot receive!
Any input? I have a s620 t mobile. Thanks.
I got it to work! Here is what I did:
Start -> settings -> connections -> gprs -> menu -> add:
Connects to: secure wap network (use any but make sure you use the same in the next step)
Access point: media.com
User name: media
Password: mda01
IP address: 172.25.0.107
Start -> messaging -> highlight mms and click menu -> settings -> menu -> mmsc settings
Now you can either add a new one or edit the existing one that is in there.
MMSC URL: http://mms.gprs.rogers.com
WAP gateway: 172.25.0.107
Port: 80
Connect via: Secure WAP Network (must be the same one you used in the step above)
WAP version: WAP 2.0
That should do it. If it gives you an error about the download being expired, just hit the menu and click download anyway.
Have the ROGERS ROM the Spanish ???
I have one unlocked DASH fron T Mobile and need the spanish but after more of 20 days can't find any ROM to change to spanish.
My DASH have the original HTC ROM.
I have flashed 45 days ago.
Please, lt me know about.

MMS account missing

I have upgraded my Rom to ver 1.28.0.0 WWE. I then added the T-mobile UK customisation cab to get all the correct settings back.
Everything went smoothly and the device is working like a charm for the last week now.
A friend of mine sent me a MMS yesterday and it crashed my device. After doing some investigation i found that the reason may be that under my messaging accounts i only have text and outlook, no mms.
I.e when i go into the inbox then click tools-options i don't have MMS there.
Any help on this would be appreciated.
Funny you didn't just look Here first.
Gajet said:
Funny you didn't just look Here first.
Click to expand...
Click to collapse
Actually i have already gone through that. The instructions from T-mobile won't help as i don't have the option of MMS in messaging under tools-options.
Screenshot of Accounts:
Another screenshot. Hope you know understand the problem:
Ahhhh, yes I do see your problem now. Odd as an MMS account appears to be part of the ROM and not a user configurable option, you may need to have to enter the settings, but it's actual presence is not optional.
Where did you get this upgraded ROM?
If you hard reset and do not run T-Mobile customisation cab do you get a blank MMS account?
P.S. Why not upgrade to WM6?
Gajet said:
Ahhhh, yes I do see your problem now. Odd as an MMS account appears to be part of the ROM and not a user configurable option, you may need to have to enter the settings, but it's actual presence is not optional.
Where did you get this upgraded ROM?
If you hard reset and do not run T-Mobile customisation cab do you get a blank MMS account?
P.S. Why not upgrade to WM6?
Click to expand...
Click to collapse
The rom is the PDAMobiz rom on the ftp. I installed the T-mobile original rom and it came back. But then installed the PDAMobiz rom again and lost it again.
Hard reset without the T-mobile customisation cab before too. But that still did not work. It must be in the rom? Anyone know how i can get it back without having to change rom, as i like this PDAMobiz rom a lot. Its so much faster then the T-mobile rom. Makes a world of difference.
???
BTW. My device is both SIM and CID unlocked in case that should make any difference..
Personally I'd just upgrade straight to one of the WM6 ROM's available on this site.
WM6 is faster than WM5 by default, there is a PDAMobiz version if you are particularly after theirs.
I have Bepe's original WM6 WWE.
I'm not sure I see the value of upgrading to a ROM that is essentially out of date now. Especially as that ROM appears to be faulty in regards to MMS.
Thanks Gajet. I thought id have to change ROM. Guess i was just delaying the inevitable..
Yeah it's a problem with that ROM. I've tried to get it working with no avail. Now, IF you can understand the instructions given to this guy and you can follow them, then you might solve your problem:
http://forum.xda-developers.com/showthread.php?t=304706&page=6
I don't understand the instructions and the user did not respond to my PM so...
I know this is an old thread but this happened to me on an Exec a couple of years ago.
I'm guessing it will still be somewhere in the exec forum,
failing that I have two different cabs both of which claim to bring back the MMS folder, although I cant guarantee it works for an orbit but i guess its worth a try seen as the only other option that fixes it is a hard reset.

supa dupa beta testing now available ( will be my last roms)

supa dupa beta based on supa dupa lite but making it so bare bone it makes you smile
Two roms will be available one with mms built in and one without
Rom 1 Total storage free 81.20 mb
Rom 2 Total storage free 78.31 mb
Changes from supa dupa lite:
1. Removed all system tools program
2. Removed task manager
3. Removed htc network wizard and network plugin
Unknown problems with htcustom and shaps advance config giving unknown error
problem still looking into.
Additional
Most cabs available in the supa dupa extra add ons pack + more
http://rapidshare.com/files/53220404/supa_dupa_extra_addons.zip
Customer feedback now removed by a cab provided by edward-riko
Remove Customer Feedback Icon.zip
Please post your bugs and feed back so we can all enjoy the ultimate stable lite rom available.
Links to roms
http://rapidshare.com/files/53218411/supa_dupa_beta__mms_.zip
http://rapidshare.com/files/53224152/supa_dupa_beta_2.zip without mms
http://maxupload.com/8C943F7F without mms
Rom versions still showing supa dupa lite
I forgot to edit version
I will upload to maxupload as soon as { link available now}
@dutty, I only want to send MMS on the supa dupa lite, is possible install some kind of cab or manage the registry?!
my space
Reserved space ----------------------
-WM6_BT_DUN.cab
Fidalgos said:
@dutty, I only want to send MMS on the supa dupa lite, is possible install some kind of cab or manage the registry?!
Click to expand...
Click to collapse
let me give it a try what network or you using
Vodafone, PORTUGAL @dutty.
I am so happy with your supa dupa lite and now... if no remedy to MMS ....
@dutty, I attach one cab for BT DUN connection with GPS TomTom GO series like 520, 720, 910, etc. Your supa dupa dont have and I install this cab to make funcional the BT connection with GPS TomTom and the TTom services.
Well done Duttythroy! Sorry to hear it's your last ROM though
Many thanks!
P.S. Does this have the colour battery icons with low power warning cooked in?
P.P.S. For future reference 'bareback' usually means riding without a saddle (on a horse) or 'without condom'
Edit: You probably meant 'bare bone'
Fidalgos said:
Vodafone, PORTUGAL @dutty.
I am so happy with your supa dupa lite and now... if no remedy to MMS ....
@dutty, I attach one cab for BT DUN connection with GPS TomTom GO series like 520, 720, 910, etc. Your supa dupa dont have and I install this cab to make funcional the BT connection with GPS TomTom and the TTom services.
Click to expand...
Click to collapse
thanks i will look into mms sending problem or if anyone else who still getting the same problem please report
thank you for the credit
i use the T-lite version and it is good but now i have to try your last version (without mms)
downloading........
my regards
edward
I think the problem is when I click 'send' only send to Outbox (1) but dont follow to connect to MMS connection I try install another version of Arcosoft MMS composer 3.5 and now when I create an MMS the templates is ok (the images past to MMS) but the problem is the same... stay on Outbox. Also with this version the New MMS dont appear MMS but two squares and an (A). I unistall this version and now when I soft-reset... LOL... the original with your ROM is now strange... PUM! Is the end... my end...
I dont install more apps until this problem is solved... my dear @dutty! I am an unhappy man now! I like very mutch the supa dupa and I know you find the solution!
Thanks for your support
Best Regards
Fidalgos said:
I think the problem is when I click 'send' only send to Outbox (1) but dont follow to connect to MMS connection I try install another version of Arcosoft MMS composer 3.5 and now when I create an MMS the templates is ok (the images past to MMS) but the problem is the same... stay on Outbox. Also with this version the New MMS dont appear MMS but two squares and an (A). I unistall this version and now when I soft-reset... LOL... the original with your ROM is now strange... PUM! Is the end... my end...
I dont install more apps until this problem is solved... my dear @dutty! I am an unhappy man now! I like very mutch the supa dupa and I know you find the solution!
Thanks for your support
Best Regards
Click to expand...
Click to collapse
just tried mms and worked 100 % i tried sending one to myself first and it work and then try sending to my other phoe and went through, strange that it doesnt worked for you. have you got proxy set up.
just tried a 6mb sua dupa lite and wow it just flew
can't compose new sms with the (no mms version)
there is a problem with the sms
I`ve flashed MMS version, there are now 2 MMS "accounts".. it is both integrated with SMS and split from SMS..
duttythroy said:
just tried a 6mb sua dupa lite and wow it just flew
Click to expand...
Click to collapse
Is it significantly/noticably faster?
Hi,
outstanding work thanks for this Rom.
MfG
S64
I think you got it w/ the beta
OK, as i promised, i was just getting to have fun w/ the supa dupa, and then i see this.
OK! i flashed w/ the ROM 2, it provided me w/ the 77mb free... i didn't want to go crazy and get the 81mb.
But if some has tried please let me know if it is worth it.
Otherwise this is as good as it gets.
I think i was complaining a bit about the sluggishness before but not w/ this. and come to think of it supa dupa was perfect.. i was in fact going to keep it as my ROM, until i read the post.
I'm sorry that this will be your last rom, but your name will go on...
thanks again for all your hard work, and sharing it with everyone,.
duttythroy said:
just tried mms and worked 100 % i tried sending one to myself first and it work and then try sending to my other phoe and went through, strange that it doesnt worked for you. have you got proxy set up.
Click to expand...
Click to collapse
No @dutty I have no proxy setup and I confirm the settings of MMS Vodafone is correct; I send also an MMS to me and is the same... stay in 'Outbox'. I need some kind of application installed to work the Arcosoft MMS? can you send to me the same version of Arcosoft 4.2.8.1 because now... like I say to you when I create a MMS I see two litle squares and an (A)... because I install an old version to see if correct the problem and now...
If I am the only one with this problem I think I return to my last Schap's 3.54c ROM (all work ok but is very slow X your supa dupa).
Best Regards
Mid said:
Is it significantly/noticably faster?
Click to expand...
Click to collapse
yes faster might do
a
6mb
8mb
16mb
Fidalgos said:
No @dutty I have no proxy setup and I confirm the settings of MMS Vodafone is correct; I send also an MMS to me and is the same... stay in 'Outbox'. I need some kind of application installed to work the Arcosoft MMS? can you send to me the same version of Arcosoft 4.2.8.1 because now... like I say to you when I create a MMS I see two litle squares and an (A)... because I install an old version to see if correct the problem and now...
If I am the only one with this problem I think I return to my last Schap's 3.54c ROM (all work ok but is very slow X your supa dupa).
Best Regards
Click to expand...
Click to collapse
i will have another look into it, have you tried the rom with mms built in that should work
mms doesnt work on th rom with 81.20 mb free, just made this one for people who doesnt use mms. if you install palm threaded sms that will replace the one in the rom and therefore get rid of the sms/mms icon in messaging

wm6.1 softbank rom - Softbank WWE Rom Uploaded

UPDATE
The rom is only WWE but wz Softbank OEM hope ill solve the softbank user issues.
-----------------------------------------------
This softbank rom is for Softbank user that need the softbank plan to work ... hopefully this rom will be much of help ...
Note that in this rom, I am still using the BJ2 SYS files with the OEM from Softbank, CHOME will only be in ENG, no mui yet to change it to Japanese
Take note this will NOT SIM UNLOCK ur phone
Before Flashing ... Pls do a HARD SPL
I will not be responsible if anything happen to ur device
LINK
-------------------------
DOWNLOAD HERE
regards
softbank wm6.1
when will it be uploaded---today!
cruzzmz where will it be uploaded?
leoles21 said:
when will it be uploaded---today!
cruzzmz where will it be uploaded?
Click to expand...
Click to collapse
Uploaded ... Pls see post #1
pls report if there is bugs in the rom but cant promise a fix right away
Pls report on the settings ... whether it work or not
Softbank Wm6.1
cruzzmz i tested the softbank wm6.1 awhile ago theres a problem....
the start menu doesnt work althought it booted good..
i cannot access the start menu although the contact menu works..
leoles21 said:
cruzzmz i tested the softbank wm6.1 awhile ago theres a problem....
the start menu doesnt work althought it booted good..
i cannot access the start menu although the contact menu works..
Click to expand...
Click to collapse
if that is the case than the rom is no good ... not sure what is wrong ... since i cant try it on my dopod yet ...
ehmm maybe there is something wrong wz the sys since i just replace the mui of the old softbank rom to the wm6.1 sys ...
hv to get an expert to help me on that
Softbank Wm6.1
just waiting take your time.......
seems like wm6 mui will not work on wm6.1 ....
if anybody wants, the rom will be only in English but using the OEM frm softbank ... dunno if it gonna solve the softbank user issue or not
if u want it pls respond
regards
yes want to try it
yes i want to try it....
Uploaded
Uploaded ... hope somebody will try it
Hello Cruzzmz,
does this rom w/ a2dp? thanks!
eric
hkericng said:
Hello Cruzzmz,
does this rom w/ a2dp? thanks!
eric
Click to expand...
Click to collapse
it should have it .... but if u r using a non Softbank plan ... not sure if it will detect ur network though
hi men i need the chinese 6.1 rom, can you cooked it? u can change 0804mu from the wm6 chinese rom. bro. please
tried softbank updated..
i tried the updated softbank rom...issues...
1: icons on the top like bluetooth,signal and 3g are not good they are bold and not the standard one.
2: no need to put the eT9 just leave it as ease
3. cannot send mms
4: the model name is still Dopod and not X02ht
5: there no bluetooth light when turn on
i think thats all when i tested it so far....
hope cruzzmz you can try it.....
leoles21 said:
i tried the updated softbank rom...issues...
1: icons on the top like bluetooth,signal and 3g are not good they are bold and not the standard one.
2: no need to put the eT9 just leave it as ease
3. cannot send mms
4: the model name is still Dopod and not X02ht
5: there no bluetooth light when turn on
i think thats all when i tested it so far....
hope cruzzmz you can try it.....
Click to expand...
Click to collapse
thanks for the feedback,
does the softbank plan work on the rom?
regarding mms, is the setting correct? how bout gprs & text?
bluetooth hv u try pairing a BT wz it?
regards Thx
Hello,cruzzmz
i tried the updated softbank rom,too.
I'm using in Japan, no probrem without the top-icons clash.
Send MMS, It is necessary to input the password to "Connections-GPRS".
*I know the password
I hope for the improvement of "the top-icons clash".
Lunakay said:
Hello,cruzzmz
i tried the updated softbank rom,too.
I'm using in Japan, no probrem without the top-icons clash.
Send MMS, It is necessary to input the password to "Connections-GPRS".
*I know the password
I hope for the improvement of "the top-icons clash".
Click to expand...
Click to collapse
could u gv a screenshot of the icons?
how bout sharing the gprs password
Btw how bout the BT light problem?
This is the GPRS setting for softbank.....
Connect to: the internet
Access point: open.softbank.ne.jp
Username: opensoftbank
Password: ozRt8n29Ra1Psd07
Proxy name: softbank proxy
Connects from: wap network
Connects to: wap network
Proxy (nameort) : webopen.softbank.ne.jp:8080
Type: HTTP
Cruzzmz hope you can correct the issues of softbank rom wm6.1......
Please check screenshot of the icons.
leoles21 said:
Connect to: the internet
Access point: open.softbank.ne.jp
Username: opensoftbank
Password: ozRt8n29Ra1Psd07
Proxy name: softbank proxy
Connects from: wap network
Connects to: wap network
Proxy (nameort) : webopen.softbank.ne.jp:8080
Type: HTTP
Cruzzmz hope you can correct the issues of softbank rom wm6.1......
Click to expand...
Click to collapse
Thats not the right password. That password is out of date, and replaced by another, unknown one in early 2007.
yukster said:
Thats not the right password. That password is out of date, and replaced by another, unknown one in early 2007.
Click to expand...
Click to collapse
i know the password... i have a nice cab file made by LARSUCK, it will automatically setup the connection

[Q] Desire Internet Connect with German O2

Hallo Desire Fans,
I'm using T-Online Desire but with O2 Online-Package M going online into Internet. With Android 2.1 and actually APN anything fits perfect - browsing through the internet.
Some days after updating Anroid 2.2 I recognize that the browser don't reach any page. I use an early update 2.2 - not specific one from o2, t-online, vodafone...
I use actually APN Data sent by o2. In the settings the APN Connect shows connected (Verbunden) but in dolphin and other browsers nothing happens.
O2's solution is to reset the Desire to Firmware 2.1 - but I wish to use Android 2.2 Do anyone of you know about this problem or places to look for fixing it?
Thanks for any hints going to internet.
Ciao, Matthias
vatel65 said:
Hallo Desire Fans,
I'm using T-Online Desire but with O2 Online-Package M going online into Internet. With Android 2.1 and actually APN anything fits perfect - browsing through the internet.
Some days after updating Anroid 2.2 I recognize that the browser don't reach any page. I use an early update 2.2 - not specific one from o2, t-online, vodafone...
I use actually APN Data sent by o2. In the settings the APN Connect shows connected (Verbunden) but in dolphin and other browsers nothing happens.
O2's solution is to reset the Desire to Firmware 2.1 - but I wish to use Android 2.2 Do anyone of you know about this problem or places to look for fixing it?
Thanks for any hints going to internet.
Ciao, Matthias
Click to expand...
Click to collapse
Are you rooted..?
If flash my rom..its based on the o2 froyo 2.2 if not..and also don´t want to root.... flash the original from the german o2 site
Also i read a tip...: let the apn typ (last thing of apn settings) free
with kind regards..Alex
Not sure ;-) What's 'rooted...'?
The phone system is booted and SIM.. is in use.
I don't use froyo. The last update takes 2 day's to reorganize the lost of Data. Next updating is the last way. I know that same Update and using of APN... fit's by a friend with o2. The only different is, that my device is from T-Mobile.
@ Alex: Thank's for help.
I use original o2 APN settings and this one are without last entry (APN-Type), this hint you heard is correct.
Is there anyone using T-Mobile Phone with o2 and updating to Android 2.2?
Connections ?
hm - there MUST anything other wrong:
because on this way you cant root your phone
And on my phone it works perfect !
Name: o2-Internet
APN: o2surf
Proxy:
Port:
Nutzername:
Password:
Server:
MMSC: http://10.81.0.7:8002
MMS-Proxy: 82.113.100.005
MMS-Port: 8080
MMS-Protokoll Wap2.0
MCC 262
MNC 07
Authentifizierungstyp: nicht festglegt
APN-Typ: nicht festglegt
OK my setting too - only APN: internet (given by o2) but both setting didn't work.
need help with setting up the apn
i have got a desire with 2.2 onit from 3uk network. i am trying to setup new apn on it. i am able to save the apn settings, but unable to get the radio button nxt to it to select it to be in use. i have added multiple apn settings, all with no radio button nxt to it. i have restored the apn settings to default, rebooted, restored entire phone to factory settings, added apn settings again, tried all combination, but no joy.
i had a bit of success on adding the apn and deleting muti-multiple times, but since i had to reset the phone that was delleted again. now agin no radio button.
Can any one post any solution on this plz.
HTC O2 NEO
HTC AT&T 8525
HTC DIAMOND & DESIRE (current)
Soon SAMSUNG OMNIA 7

Categories

Resources