Develop Bugs

AKU3.2 Rom for Universal (until 21.12.06)

New thread
Look here:
http://forum.xda-developers.com/showthread.php?p=1082908

Old versions which are good but not the newest
Look here:
http://forum.xda-developers.com/showthread.php?p=1082908

Look here:
http://forum.xda-developers.com/showthread.php?p=1082908

Ahhh... new ROMs are so exciting! How much free RAM after install?

I do the upgrade it's ok

This is the first time I tried your ROM. So far I have no complaints. Speed is comparable to Indra's Beta 5 without anything installed. Both your ROM (Ivan) and Indra feels a little faster than JWright's 1.90.96. What I like about your ROM is the clean look it has, like an official Microsoft released ROM. Thank you for this ROM.

thank you
my very first upgrade
works perfect

Thanks, I'll try it later this week (currently running your beta14)
One Question: you mention
'No Extended Rom needed anymore'
in your changelog. Does this means I no longer have to unlock the Ext_Rom manually? Is it available for use right after flashing, or am I misunderstanding something here?

thanks, very very good work, but this is a transitory rom... well.. when the great change?

Some screen shots plz
Lt.Cmdr.Ivan said:
This is a AKU3.2 Rom.
If you have questions what AKU is about, read this:
http://www.mobile-review.com/pda/articles/wm-aku-en.shtml
Some features from AKU3 on Modaco:
http://www.modaco.com/index.php?showtopic=246614
OS 5.1.342
Build 15605.3.2.0
SP AKU 3.2
newest Beta 15
Very Special thanks to Mamaich because without him the rom wouldn't be as good as it is.
Thanks to venusforu for the plugin pack the should put the Audio/Video files into a working state again.
Old beta14 for reference testing (Speed stability etc.)
ftp://xda:[email protected]_AKU3_WWE/Ivan/UNI_AKU3_2_WWE_IVAN_beta14.rar
NEW AKU3.2 beta15 is on the FTP:
ftp://xda:[email protected]_AKU3_WWE/Ivan/UNI_AKU3_2_WWE_IVAN_beta15.rar
-------------------
Beta15 changes/additions/features List:
CompactFramework 2.0 SP1
Removed Battery icon on top
Pocket MSN works with "non hotmail"(for example [email protected]) adresses
No Extended Rom needed anymore
New MMS Client 3.5.1.5
IA Zip upgedatet
PagePool increased to 6MB
New Ringtone Plugin
New WlanManager
Pocket MSN works with non hotmail adresses
Phonepad included
Pushmail should work
Vista B1 Theme
Added New Battery Icon at bottom (this time it works)
New Camera 3.00 22864
Video Call Support enabled Options screen available now
Smartdialing with options tab
I forgot to mention
USB_HDD function supported
Credits for this go to Jwrightmcps and his rom where i took it from.
Voice Speed Dial Cab from Conchas included in the rar, so you can choose to use it
Autorun function is mapped to autorun.exe again.
Added Improvements from Jwrightmcps BT Stack stuff
Changed Paging settings for speed
----------------------------------------------------------------------------
Please check and verify the programs which function. Especially tests are welcome in this departments:
BB client functionality status unknown
----------------------------------------------------------------------------
As this rom is work in progress it may contain bugs which were removed previously, but not removed from this version. Please check and report bugs and solutions (if you find them).
Bugs: (1 known)
WIFI error1
Universal goes to standby mode with Wi-Fi turned on, then I switch the
device on, and it starts trying to register in Wi-Fi net forever
(shows "tower" but without circle and rays)
Only syncs if you do it manually
Click to expand...
Click to collapse
HI,
CLD ANYONE attach screenshots plz...Excited to look VISTA theme
Thnks

Still Rom date is 09/20/06 and it appers on the startup screen again.

WLan settings are no more accessible after installing German MUI. (Crash)
But that happened on beta 14, too. Seems to be an MUI issue.

melino said:
WLan settings are no more accessible after installing German MUI. (Crash)
But that happened on beta 14, too. Seems to be an MUI issue.
Click to expand...
Click to collapse
Sorry, what is "German MUI issue"?
Thank you...

I do not have the issue of the disconnecting Wifi (the reported "bug")?. So for me an excellent ROM.

Great job once again!!
When I reset the Qtek 9000 I received the message
" sddaemon.exe not present!! "??
Many Thanks

I have installed this rom, after some hour of use the memory ram comes down under 15 mb and must make a soft reset ,but this is normal? someone of you has tried wisbar?for me qtek9000 it is a fantastic device if I resolve the problem of ram ((

babak said:
I have installed this rom, after some hour of use the memory ram comes down under 15 mb and must make a soft reset ,but this is normal? someone of you has tried wisbar?for me qtek9000 it is a fantastic device if I resolve the problem of ram ((
Click to expand...
Click to collapse
Hehe... Don't sweat it. My RAM virtually never goes higher than 12 MB and I have no problems running any applications at all. Cheers!

Camera
Thanks for the update. I'm just wondering how come "New Camera 3.00 still says 22844 instead of 22864 for beta 15? Please let me know. Thanks!

Report on the new ROM (upgrading from O2 UK 1.30.162 ROM):
Booting seems much faster (after installing several apps and having rebooted it a few times). I guess this is due to RAM disk.
True VGA mode is waaay much better than 1.30.162 ROM - system fonts are properly aligned and the only problem I found so far is battery settings and dial pad (the latter is fixable with vinay's application).
Speed and responsiveness seems to be better than my previous O2 AKU2 ROM.
There are a few problems though:
there are some compatibility problems - like InterKey virtual keyboard causes hangs every now and then and it was working perfectly well with AKU2
Battery life seems to be worse than AKU2 - before I had my device on standby with blootooth enabled for the whole working day (8:00-18:00) with an hour of reading with Haali reader and it was hardly below 80% (75 or around). Now it was down to 70 % in the first few hours. And for the curious - I did checked all the usual stuff (receive all beams - off and so on)
Other than that - great

I have installed this ROM, it seems perfect.

MMS account missing

I have upgraded my Rom to ver 1.28.0.0 WWE. I then added the T-mobile UK customisation cab to get all the correct settings back.
Everything went smoothly and the device is working like a charm for the last week now.
A friend of mine sent me a MMS yesterday and it crashed my device. After doing some investigation i found that the reason may be that under my messaging accounts i only have text and outlook, no mms.
I.e when i go into the inbox then click tools-options i don't have MMS there.
Any help on this would be appreciated.

Funny you didn't just look Here first.

Gajet said:
Funny you didn't just look Here first.
Click to expand...
Click to collapse
Actually i have already gone through that. The instructions from T-mobile won't help as i don't have the option of MMS in messaging under tools-options.

Screenshot of Accounts:

Another screenshot. Hope you know understand the problem:

Ahhhh, yes I do see your problem now. Odd as an MMS account appears to be part of the ROM and not a user configurable option, you may need to have to enter the settings, but it's actual presence is not optional.
Where did you get this upgraded ROM?
If you hard reset and do not run T-Mobile customisation cab do you get a blank MMS account?
P.S. Why not upgrade to WM6?

Gajet said:
Ahhhh, yes I do see your problem now. Odd as an MMS account appears to be part of the ROM and not a user configurable option, you may need to have to enter the settings, but it's actual presence is not optional.
Where did you get this upgraded ROM?
If you hard reset and do not run T-Mobile customisation cab do you get a blank MMS account?
P.S. Why not upgrade to WM6?
Click to expand...
Click to collapse
The rom is the PDAMobiz rom on the ftp. I installed the T-mobile original rom and it came back. But then installed the PDAMobiz rom again and lost it again.
Hard reset without the T-mobile customisation cab before too. But that still did not work. It must be in the rom? Anyone know how i can get it back without having to change rom, as i like this PDAMobiz rom a lot. Its so much faster then the T-mobile rom. Makes a world of difference.
???

BTW. My device is both SIM and CID unlocked in case that should make any difference..

Personally I'd just upgrade straight to one of the WM6 ROM's available on this site.
WM6 is faster than WM5 by default, there is a PDAMobiz version if you are particularly after theirs.
I have Bepe's original WM6 WWE.
I'm not sure I see the value of upgrading to a ROM that is essentially out of date now. Especially as that ROM appears to be faulty in regards to MMS.

Thanks Gajet. I thought id have to change ROM. Guess i was just delaying the inevitable..

Yeah it's a problem with that ROM. I've tried to get it working with no avail. Now, IF you can understand the instructions given to this guy and you can follow them, then you might solve your problem:
http://forum.xda-developers.com/showthread.php?t=304706&page=6
I don't understand the instructions and the user did not respond to my PM so...

I know this is an old thread but this happened to me on an Exec a couple of years ago.
I'm guessing it will still be somewhere in the exec forum,
failing that I have two different cabs both of which claim to bring back the MMS folder, although I cant guarantee it works for an orbit but i guess its worth a try seen as the only other option that fixes it is a hard reset.

MMS on Three Australia with Schaps rom's

Has anyone been able to get MMS working on Three Australia??
I've been trying for the last few days and it's work with pretty much all other customized roms.. but this one is giving me issues? Maybe something to do with device identity on three servers or maybe this new version of arcsoft broke something???
I'm 100% certain settings are correct. I've tried with network setup wizard, and the following:
Gateway: 10.176.57.25
Port: 8799
Server address: http://mmsc.three.net.au:10021/mmsc
Connect via: (3 services connection, whatever it's called?) Mine is MY ISP
also tried with:
Server address: http://mmsc.three.com.au:10021/mmsc
No juice at all.. anyone else want to confirm on three Australia?? Oh and sorry about making a new thread for this.. I tried posting this in schaps thread but no response many times. I'm just looking for ANYONE to test and confirm this.

Also on Three Australia, running Schaps 3.54c. I don't usually use mms but just tried to send and it didn't work, using settings from the network wizard (checked against what I had previously sourced from aussie3g)
So it's not just you....

bigruss said:
Also on Three Australia, running Schaps 3.54c. I don't usually use mms but just tried to send and it didn't work, using settings from the network wizard (checked against what I had previously sourced from aussie3g)
So it's not just you....
Click to expand...
Click to collapse
Hey thanks for that.. just wanted to make sure I wasn't going crazy... It annoys me a bit, because I'm really REALLY loving this rom.. besides the mms thing, not one glitch and has everythign i need...

im running 3.54c and i am getting MMS with 3 Australia no issues at all. the settings are correct but as it has been posted before on other sites, you have to ring 3care and report a fault. tell them mms doesnt work just play along with them with regards to OS (stock 3 ROM) and settings.
they need to reset your 'individual profile' on the server. i had to get this done as MMS were not sending at all. it took about 3-4 days but i got fixed and MMS are working fine, send and receieve with only a minimal delay (2min max) between send and recieve.
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
.... on another note 3.60a beta did not work with 3australia and the MMS settings, so i had to go back to 3.54c.....
Drooch

drooch said:
im running 3.54c and i am getting MMS with 3 Australia no issues at all. the settings are correct but as it has been posted before on other sites, you have to ring 3care and report a fault. tell them mms doesnt work just play along with them with regards to OS (stock 3 ROM) and settings.
they need to reset your 'individual profile' on the server. i had to get this done as MMS were not sending at all. it took about 3-4 days but i got fixed and MMS are working fine, send and receieve with only a minimal delay (2min max) between send and recieve.
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
.... on another note 3.60a beta did not work with 3australia and the MMS settings, so i had to go back to 3.54c.....
Drooch
Click to expand...
Click to collapse
That's really strange... because the simcard and network is fine, i've tested it in other phones without issue.. i've been tru hell with mms before where it wouldn't send and then three did reset the profile and all was good. but this is a different issue and it's strange how it didn't work in the beta but it's working for you in 3.54c as techincally their both the same, it's just 3.60a beta is based on a new build of wm6.... and both are using the same version of arcsoft as well.

drooch said:
im running 3.54c and i am getting MMS with 3
just make sure your connect via settings has the APN 3services. Also WAP 2.0 and 300kb limit.
Drooch
Click to expand...
Click to collapse
Oh and one other thing I noticed... if you change to wap 2.0 so does the port number from 8799 (which it's supposed to be) to 8080 (which is the default for wap 2.0). I would double check your settings and see what their set to because it's not making much sense...

thats why the 3.60a ROM doesnt work.... it auto selects the port based on WAP version. the 3.54c version does not do this and therefore still works
Drooch

argh, why did I test this for you?! It's bugging me too now. I have the same situation where the port changes based on the wap version, running 3.54c (just checked in case I was being really stupid)
so it looks like we either have the wrong port or the wrong wap....
strange that it is working for one person.

drooch said:
thats why the 3.60a ROM doesnt work.... it auto selects the port based on WAP version. the 3.54c version does not do this and therefore still works
Drooch
Click to expand...
Click to collapse
Well actually 3.54c does do this (change the port to 8080 on wap2.0). Everyone else's post in here confirm this.
And too be honest.. i don't think that's what's causing the issues, because well wap1.2 should still work...

yes it does auto select a port number when u select the Wap version but if u overwrite it, it does not revert back to the original number, so u can select wap 2.0 and then overwrite the value back to 8799 and select ok. it should then stay on that port number.
I work in the industry and i must say that this issue only arises on cooked ROMS. i dont know if this will help but i have attached a hutchison file that was from the extrom of the dopod rom. i dont know what it contains but it may help
Drooch

drooch said:
yes it does auto select a port number when u select the Wap version but if u overwrite it, it does not revert back to the original number, so u can select wap 2.0 and then overwrite the value back to 8799 and select ok. it should then stay on that port number.
I work in the industry and i must say that this issue only arises on cooked ROMS. i dont know if this will help but i have attached a hutchison file that was from the extrom of the dopod rom. i dont know what it contains but it may help
Drooch
Click to expand...
Click to collapse
hmm.. well i'm running 3.54c and i can confirm.. if you change the port then hit ok.. go back into the settings and you'll see the port / wap version has been changed automatically for you...

well i dont know why thats happening.
did you set up a new configuration or overwrite the sample one??
ive been testing my phone since i saw this post and for some reason, if i select WAP 2.0 it will select Port 8080. i then overwrite it to 8799 and select ok.... never changes back to 8080 (unless i select WAP 2.0 again)

same happens with me, if I overwrite it will revert to the original. This happens with new and existing mms servers

drooch said:
well i dont know why thats happening.
did you set up a new configuration or overwrite the sample one??
ive been testing my phone since i saw this post and for some reason, if i select WAP 2.0 it will select Port 8080. i then overwrite it to 8799 and select ok.... never changes back to 8080 (unless i select WAP 2.0 again)
Click to expand...
Click to collapse
Are you sure your running 3.54c because outside of your post, no one else can confirm what your reporting...
Seems a bit strange...

i can confirm i am running -
ROM Version: Schap's 3.54c
ROM date: 07/05/07
Radio Version: 1.51.00.10
Protocol Version: 32.84.7020.20H
i can confirm also that this ROM can accept MMS send and recieve using 3australia with the settings that were mentioned in this post. i work for 3 and it took me 6 days of 3care communication to relsove the issue... they changed settings on their side on *my* account and now it works. the phone does not revert back to the 8080 port on *my* dopod838pro i could only get mms to work if i
a) installed the hutchison cab i posted before
b) DID NOT run the network wizard that cam with the ROM
c) entered the settings manually for connection and for MMS
d) overwrote the sample MMS settings
Drooch

drooch said:
i can confirm i am running -
ROM Version: Schap's 3.54c
ROM date: 07/05/07
Radio Version: 1.51.00.10
Protocol Version: 32.84.7020.20H
i can confirm also that this ROM can accept MMS send and recieve using 3australia with the settings that were mentioned in this post. i work for 3 and it took me 6 days of 3care communication to relsove the issue... they changed settings on their side on *my* account and now it works. the phone does not revert back to the 8080 port on *my* dopod838pro i could only get mms to work if i
a) installed the hutchison cab i posted before
b) DID NOT run the network wizard that cam with the ROM
c) entered the settings manually for connection and for MMS
d) overwrote the sample MMS settings
Drooch
Click to expand...
Click to collapse
Hmm.. thanks for all your help drooch... but i just don't see how it makes sense. I think you must be the exception. I know if I change the port to 8799 when i hit ok, and go back into the settings it's reading wap 1.2.
Also the network wizard just automates the manual input of settings, and i've looked over all the settings and can not find any differences between those and the ones listed here.
Not sure what the cab does either, but i installed it with out any luck and I've also set many times 3mms to the default connection for mms settings but it hasn't made any difference..
there is a glitch somewhere between us on three and this customized rom. I just wish I could find it already because I love the rom.

Network Wizard
I've had the same problem of WAP 2.0 selection defaulting to Port 8080 and it appears to be associated with running the Network Wizard.
I did a hard reset, entered the network settings manually then did the MMS settings - Port 8799, WAP Version 2.0, and everything worked.
So at least for 3 Australia, the advice is, don't run the network wizard, input your operator settings manually.
Cheers

finally someone that can back me up!
i assumed it was the network wizard but why??? (very weird!)
so to use 3MMS use the settings that were posted in the first post BUT DO NOT run network wizard, you must hard reset if u have used it.
Good luck,
Drooch

Ahh.. well thats some damn useful information!!!
I can't quite hard-reset my phone rite now either to test it, cuz I got too much stuff I need, but definitely handy info!!! I wonder if this applies to all roms??
And thanks drooch for your persistence In the end all we want is for stuff to work... looks like we may be getting it afterall

wm6.1 softbank rom - Softbank WWE Rom Uploaded

UPDATE
The rom is only WWE but wz Softbank OEM hope ill solve the softbank user issues.
-----------------------------------------------
This softbank rom is for Softbank user that need the softbank plan to work ... hopefully this rom will be much of help ...
Note that in this rom, I am still using the BJ2 SYS files with the OEM from Softbank, CHOME will only be in ENG, no mui yet to change it to Japanese
Take note this will NOT SIM UNLOCK ur phone
Before Flashing ... Pls do a HARD SPL
I will not be responsible if anything happen to ur device
LINK
-------------------------
DOWNLOAD HERE
regards

softbank wm6.1
when will it be uploaded---today!
cruzzmz where will it be uploaded?

leoles21 said:
when will it be uploaded---today!
cruzzmz where will it be uploaded?
Click to expand...
Click to collapse
Uploaded ... Pls see post #1
pls report if there is bugs in the rom but cant promise a fix right away
Pls report on the settings ... whether it work or not

Softbank Wm6.1
cruzzmz i tested the softbank wm6.1 awhile ago theres a problem....
the start menu doesnt work althought it booted good..
i cannot access the start menu although the contact menu works..

leoles21 said:
cruzzmz i tested the softbank wm6.1 awhile ago theres a problem....
the start menu doesnt work althought it booted good..
i cannot access the start menu although the contact menu works..
Click to expand...
Click to collapse
if that is the case than the rom is no good ... not sure what is wrong ... since i cant try it on my dopod yet ...
ehmm maybe there is something wrong wz the sys since i just replace the mui of the old softbank rom to the wm6.1 sys ...
hv to get an expert to help me on that

Softbank Wm6.1
just waiting take your time.......

seems like wm6 mui will not work on wm6.1 ....
if anybody wants, the rom will be only in English but using the OEM frm softbank ... dunno if it gonna solve the softbank user issue or not
if u want it pls respond
regards

yes want to try it
yes i want to try it....

Uploaded
Uploaded ... hope somebody will try it

Hello Cruzzmz,
does this rom w/ a2dp? thanks!
eric

hkericng said:
Hello Cruzzmz,
does this rom w/ a2dp? thanks!
eric
Click to expand...
Click to collapse
it should have it .... but if u r using a non Softbank plan ... not sure if it will detect ur network though

hi men i need the chinese 6.1 rom， can you cooked it？ u can change 0804mu from the wm6 chinese rom. bro. please

tried softbank updated..
i tried the updated softbank rom...issues...
1: icons on the top like bluetooth,signal and 3g are not good they are bold and not the standard one.
2: no need to put the eT9 just leave it as ease
3. cannot send mms
4: the model name is still Dopod and not X02ht
5: there no bluetooth light when turn on
i think thats all when i tested it so far....
hope cruzzmz you can try it.....

leoles21 said:
i tried the updated softbank rom...issues...
1: icons on the top like bluetooth,signal and 3g are not good they are bold and not the standard one.
2: no need to put the eT9 just leave it as ease
3. cannot send mms
4: the model name is still Dopod and not X02ht
5: there no bluetooth light when turn on
i think thats all when i tested it so far....
hope cruzzmz you can try it.....
Click to expand...
Click to collapse
thanks for the feedback,
does the softbank plan work on the rom?
regarding mms, is the setting correct? how bout gprs & text?
bluetooth hv u try pairing a BT wz it?
regards Thx

Hello,cruzzmz
i tried the updated softbank rom,too.
I'm using in Japan, no probrem without the top-icons clash.
Send MMS, It is necessary to input the password to "Connections-GPRS".
*I know the password
I hope for the improvement of "the top-icons clash".

Lunakay said:
Hello,cruzzmz
i tried the updated softbank rom,too.
I'm using in Japan, no probrem without the top-icons clash.
Send MMS, It is necessary to input the password to "Connections-GPRS".
*I know the password
I hope for the improvement of "the top-icons clash".
Click to expand...
Click to collapse
could u gv a screenshot of the icons?
how bout sharing the gprs password
Btw how bout the BT light problem?

This is the GPRS setting for softbank.....
Connect to: the internet
Access point: open.softbank.ne.jp
Username: opensoftbank
Password: ozRt8n29Ra1Psd07
Proxy name: softbank proxy
Connects from: wap network
Connects to: wap network
Proxy (nameort) : webopen.softbank.ne.jp:8080
Type: HTTP
Cruzzmz hope you can correct the issues of softbank rom wm6.1......

Please check screenshot of the icons.

leoles21 said:
Connect to: the internet
Access point: open.softbank.ne.jp
Username: opensoftbank
Password: ozRt8n29Ra1Psd07
Proxy name: softbank proxy
Connects from: wap network
Connects to: wap network
Proxy (nameort) : webopen.softbank.ne.jp:8080
Type: HTTP
Cruzzmz hope you can correct the issues of softbank rom wm6.1......
Click to expand...
Click to collapse
Thats not the right password. That password is out of date, and replaced by another, unknown one in early 2007.

yukster said:
Thats not the right password. That password is out of date, and replaced by another, unknown one in early 2007.
Click to expand...
Click to collapse
i know the password... i have a nice cab file made by LARSUCK, it will automatically setup the connection

Please help!!!

HI,
guys i am new with my i-mate jasjam(herm 100).. and i had a problem with my sms service. i was not able to send sms with any sim card. so i installed some titanium edition wm 6.5 rom(previously i had wm5). and when i sync it with my pc i found that it was a trial version and it expired now giving me a white screen written
"this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our costumers.
to obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release."
now i am not able to access any thing on my i-mate. even active sync is not able to synchronize with the pc.
i only want install a good windows(rom) in it. so can any body help me with this problem of mines in easy way.like giving me a direct link to official rom and instructions to install it,,,
thanx a lot!!!

found the solution but still need help
i got the solution for expired version from another xda thread. hard reset did the job.
but i still need a official rom.wm 6 or latest.if dont than atleast please give me some link for wm5 official rom. i dont want to play with roms just give me a rom with which i can use my i-mate jasjam peacefully and also i can send sms to my friends... please help me thank you!!

AT&T
Here, Official wm6 AT&T
Here for Official HTC WM6 Rom all links

1 more question
THANX A LOT IRFAN. I GOT THE ROM EN IM DOWNLOADING IT NOW...
just tell me few things more, what is AT&T.
and what does radio ver means??

still having the same problem!!!
guys ive tried installing a new rom (i;e wm6)en it is working perfectly fine.
but my sms problem is still not solved. i can receive sms but cant send it.
any body knows what should i do????
plse help me!!!

umair muddassir said:
guys ive tried installing a new rom (i;e wm6)en it is working perfectly fine.
but my sms problem is still not solved. i can receive sms but cant send it.
any body knows what should i do????
plse help me!!!
Click to expand...
Click to collapse
Use this. It's a cab file so just install it, then run the program. Use your current network.
What happens sometimes is the proper settings are not set up, so you end up with your situation.

need that apllication for wm6
thanxxx for the rply,
i tried that software but it is not displayed any where, while installing it gave an caution that it was designed for previous windows.
so i got the name of it (i;e htc your application name). ill search for it on net for wm6.
please if get it from some where so do post the link. thanx a lot.

extra info
and just for more info i am using gsm prepay network, company name ufone!

waiting!!!!
comon guys waiting impatiently for ur replys....need help here!!!

try playing with the msg settings in schaps advanced config. check to see if the sms access number is correct.

xPreSiDenT said:
try playing with the msg settings in schaps advanced config. check to see if the sms access number is correct.
Click to expand...
Click to collapse
what is schaps advanced config???
en sms access number is correct ive seen it!!!