I just updated my Siemens SX66 to the latest qtek rom update (rom 1.40.00, radio 1.13.00, ext rom 1.40.556). I have cingular and now I can't connect to the gprs at all. I found in my phone software for connecting to various providers like T-mobile, vodafone, versatel, etc... I found this software under start and Install GPRS & MMS. The software doesn't include Cingular for the gprs connection. Please someone help me, I just got this phone and had a hard enough time just updating the rom, so now I just dont know what to do. Is there a fix or do I have to go back to the old stock rom from siemens. Please help me because I am totally lost.
Thanks so much,
Jared
i have enables wpa-psk on my wireless router but now i cannot connect my blue angel to my LAN.
is there a way round this or just BA doesnt support wpa-psk?
Works for me -- make sure you have recent ROMs. IIRC, some early versions didn't support WPA-PSK.
i have rom version 1.06.00 ext rom 1.06.160 so after looking around it pretty old rom i have. thanks
I got the latest T-Mobile Rom on my MDA3, but WPA-PSK (TKIP) doesn't work at all.
No Security -> works
WEP Encryption -> works
WPA-PSK -> doesn't work
This problem was discussed earlier, as I found out but no solution was found.
Does anybody know what is wrong with this soft ???
ROM: 1.42.01 GER
Radio: 1.13.00
ExtROM: 1.42.116 GER
I am also trying to set up WPA-PSK on the Qtek 9090.
I recently upgraded to the latest Orange WM 2003 ROM (1.40.179) but this doesn't help. Surely one of the ROM's work.
Does anyone have a working WPA-PSK system? If so please advise ROM details etc.
Would an upgrade to WM 5.0 ROM help?
I'm running WPA-PSK on my SX66 and am using the 1.42.126 beta rom from the SX66 Standardization Project -- i.e. radio ROM 1.15, system ROM 1.42 and customized 1.40 extended ROM.
I've had WPA-PSK for probably around 6 months now; every recent ROM I've used supports it. It may be that it doesn't like your router or access point -- I'm using a Linksys WAP54G, and I've also had success with the Netgear fwg114.
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Click to expand...
Click to collapse
Bet we don't see a JasJam Telstra tho'....
gomax said:
Bet we don't see a JasJam Telstra tho'....
Click to expand...
Click to collapse
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
I suspect we will never see a JasJam ROM as imate have dropped HTC as a supplier. I doubt they will got to the trouble of providing WM6 and Telstra won't do it on their own.
The original Dopod SEA WWE works great and also automatically sets up Telstra's settings. It also has the bonus of not being carrier branded and pleasingly less green than the HTC ROM.
Thanks a Million Guys.
I am sure I-mate will never have an update for JasJam especially with a WM-6 ROM.
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
So NextG is a definite go with this rom? Should I see an H in the menu or just 3G??
Greg
I just have the 3G icon to start off with, then it goes to H when i start up the data connection.
Only thing i had to do to get it going was set network type to WCDMA
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
http://www.imate.com/support/PPC_OP_Settings/Australia_Telstra.CAB
drgmt said:
Hi Guys.
Here is the way to get "everything telstra" working on your black dymond.
Step one
Install the attached telstra my place cab. Then proceed as follows....
Under connections select new connection.
Name it Telstra Internet
Click the modem tab. Click new.
Name the connection Telstra Internet
Select a Modem (GPRS, 3G)
access point name telstra.wap
Click finish
Set proxy to 10.1.1.181 port 80
HTTP should be 10.1.1.181:80
Then open telstra my place icon and navigate to foxtel. This should work.
Note to access non telstra sites you might need to disable proxy in my connections
Hope this works guys. pm if any trouble.
drgmt
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/124404-post8.html
I flashed this ROM on my Telstra i-mate Jasjam (though I use Optus) . Works great! Network Wizard automatically set up all Optus settings. Now get 3G and HSPDA speeds and MMS settings all work! Thanks to all for sharing their insights and making our devices better than ever!
new official (really official) ROM!
AT&T just released their official WM6 ROM. I won't be able to load it until tomorrow. If anyone does, please post here if it's any better than the original "official" ROM.
http://www.america.htc.com/support/8525/software-downloads.html
Imate Telstra Rom Windows Mobile
Hi spoke to a support person about a week ago and he reconed a new rom was coming for Telstra customers for Mobile 6
Hi all
Sorry if this question might sound silly but i am new to this.
I have recentley aquired a imate jasjam:
ROM version; 1.31.305.2
ROM date; 09/08/06
Radio version; 1.20.31.10
Protocol version; 32.52.7020.00H
ExtROM version; 1.31.305.103
now this is set to telstra settings
I however have a three network and dont know the setting to set it to work with three network. when i rang 3 support they told me i need to get the dopod pro which works on their network.
I though the dopod pro and imate jasjam where the same phone but they tried to convince me it is different and advised me of not trying to put dopod software on jasjam as it might lock the phone.
So now i am totally confused
Do i update my imate with the WM-6 ROM from above link? if so how...
thnx in advance for any help
Official imate WM6
Here is a link to the official release of the imate WM6 release for the Jasjam: http://clubimate.com/jasjamsupport/JASJAMAU.html
You can then configure your settings for any operator after that. And you are right - the 838pro and jasjam are the same!
I would recommend flashing the Dopod rom or a Schaps rom. These have Network wizard which will setup all your settings. I am on 3 also and use Schaps rom. Works perfectly.
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
shaker22a said:
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
Click to expand...
Click to collapse
Follow the guides available and you won't go wrong.
It was daunting at 1st for me, but after you'v done it once it's easy!
There is a Telstra WM6 rom
I'm a bit confused by some of the comments above. There is a Telstra WM6 rom available on the Club iMate site. I had downloaded and installed it successfully but unfortunately it is not supported by BB Connect 4.0.0.9x so I went back to the Dopod Asia build.
Another update from 3Aus - 6 months old, but not listed anywhere?
Strangely, I can't see any mention in the forums of the 3Aus 838pro update available from 3... They mention version 1.30.707.8, which looks like it's supposed to be newer than the one mentioned above (which ends in .707.4)... It's been available for a while, and I don't know how it compares with some of the cooked ROMs available.
http://www.three.com.au/Dopod (Select 838pro from the dropdown, then "Planet 3 software upgrade" link, then another "Planet 3 software upgrade" link... Page contains download and install instructions, and some )
Direct link to download: http://203.210.124.136/3/software/Dopod_838_Pro_p3.exe
Supposedly, according to an sms I got maybe 6 months ago, this update is supposed to enable streaming content on Planet3. I haven't tried it yet, but will be doing so in the next few days. Has anyone else had a look at this? It's not listed in the wiki either, as far as I can see... (I'm about to try it out because of not being able to get Planet 3 streaming under WM6.1...)
Edit: Never mind, this is a WM5 update. We don't have it listed anywhere, though, so I'll add in some details about it...
ROM Version 1.30.707.8 Date 12/13/06
Radio: 1.27.30.10
Protocol: 32.60.7020.06H
SPL: 1.09
IPL: 1.01
It does have streaming under Planet 3 working, though. I'll try to figure out how it works.
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Click to expand...
Click to collapse
Hi there,
Total noob here. My dopod is running windows mobile 5 - will this rom upgrade my OS to version 6?
Thanks in advance
This link is not working, is there any other linkwhere i can download
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4. Currently i have 3.54.707.3 Aus Hutchison - 3 Network ROM.
Can any one send me the link to download.
I am having a hard time telling which ROM is the the actual official ATT / Cingular 8525 Rom for Mobile 6?
I still cannot find any trace of it on the AT&T or HTC America Websites.
I also do not really know which ROM I can run properly on the Cingular network without running into configuration and proxy issues?
in response to above
this site has the current official att rom
http://www.america.htc.com/support/8525/software-downloads.html
ronniejonesjr said:
this site has the current official att rom
http://www.america.htc.com/support/8525/software-downloads.html
Click to expand...
Click to collapse
Yea... I loaded that moths ago. It's the Mobile 5 upgrade, not Mobile 6. They added a few PTT features and re-logo'd from Cingular to AT&T.
Braingears said:
I am having a hard time telling which ROM is the the actual official ATT / Cingular 8525 Rom for Mobile 6?
I still cannot find any trace of it on the AT&T or HTC America Websites.
I also do not really know which ROM I can run properly on the Cingular network without running into configuration and proxy issues?
Click to expand...
Click to collapse
You can't find it on AT&T's or HTC's sites because they haven't "officially" released the WM6 ROM for the 8525yet. It's supposed to be coming soon.
I've been using one of the "unofficially leaked" WM6 ROMs and it works fine on my 8525.
Braingears said:
I am having a hard time telling which ROM is the the actual official ATT / Cingular 8525 Rom for Mobile 6?
I still cannot find any trace of it on the AT&T or HTC America Websites.
I also do not really know which ROM I can run properly on the Cingular network without running into configuration and proxy issues?
Click to expand...
Click to collapse
you will not run into these issues you speak of on any WM6 rom since they settings can be entered manuly or there are cingular cabs floating around that load them for you its very simple try google search for cingular MMS settings and see what you find. then look for cingular ISP settings its very simple given the info on this website.
Also unfortunately, HTC doesn't allow us USA customers to register our devices for their e-club so the AT&T WM6 upgrade will only be out when AT&T says it's ready. Until then I suggest using leaked official rom found here in the forums or vp3G's custom at&t rom. Both will set your device up for use automatically.
So which one should I choose? I really don't know which one will work? Can I use a standard one? Is there any special proxy settings that need to be entered?
Braingears said:
So which one should I choose? I really don't know which one will work? Can I use a standard one? Is there any special proxy settings that need to be entered?
Click to expand...
Click to collapse
use vp3G.. it's already customized for at&t
http://forum.xda-developers.com/showthread.php?t=324451
I was using my stock universal (T-Mobile MDA II) with GPRS connection. I upgraded the ROM to Ranju's V7.6 WM6.1 ROM and in general I think it's a great improvement except now my GPRS connection doesn't work. I have tried Shap's Setup Operator but it doesn't have an option for the US. I think I either need to upgrade my radio ROM, or I need a CAB to tell the universal how to use the GPRS in the US. Can somebody please give me some tips to get it working again?
Posterbation
Just to update folks, I was about to go back to the stock ROM but I stumbled accross the DarkForcesTeam ROM and gave it a whirl. GPRS in the US on T-Mobile works just fine with that ROM. I actually like it better because it has less software installed so I can install my own, and it has a really nice custom Today screen.
James
I have the same problem of no GPRS with Ranju in the UK on vodafone.