WPA-PSK, BA support this? - MDA III, XDA III, PDA2k, 9090 General

i have enables wpa-psk on my wireless router but now i cannot connect my blue angel to my LAN.
is there a way round this or just BA doesnt support wpa-psk?

Works for me -- make sure you have recent ROMs. IIRC, some early versions didn't support WPA-PSK.

i have rom version 1.06.00 ext rom 1.06.160 so after looking around it pretty old rom i have. thanks

I got the latest T-Mobile Rom on my MDA3, but WPA-PSK (TKIP) doesn't work at all.
No Security -> works
WEP Encryption -> works
WPA-PSK -> doesn't work
This problem was discussed earlier, as I found out but no solution was found.
Does anybody know what is wrong with this soft ???
ROM: 1.42.01 GER
Radio: 1.13.00
ExtROM: 1.42.116 GER

I am also trying to set up WPA-PSK on the Qtek 9090.
I recently upgraded to the latest Orange WM 2003 ROM (1.40.179) but this doesn't help. Surely one of the ROM's work.
Does anyone have a working WPA-PSK system? If so please advise ROM details etc.
Would an upgrade to WM 5.0 ROM help?

I'm running WPA-PSK on my SX66 and am using the 1.42.126 beta rom from the SX66 Standardization Project -- i.e. radio ROM 1.15, system ROM 1.42 and customized 1.40 extended ROM.
I've had WPA-PSK for probably around 6 months now; every recent ROM I've used supports it. It may be that it doesn't like your router or access point -- I'm using a Linksys WAP54G, and I've also had success with the Netgear fwg114.

Related

PDA2k: VPN and Wi-Fi - don't work

The following problem after installation official ROM 1.40 (i-mate pda2k) has jumped out: houses Wi-Fi the network - is connected to the Internet through ADSL, as a router - kerio winroute, I try will be connected through VPN to work, at once falls off - on ROM 1.22 all worked!!! In broad gullies winroute and vpn a server - all is pure - connection occurs and falls off, anywhere nothing to be cut! And at connection to the Internet through gprs, vpn - works. At return to rom 1.22 all again works, I change radio a stack on 1.12 too works! Again I put 1.40 - the same raker!!! Where to dig??? Thankful in advance for the help, dm.
I have a qtek 9090 wwe. I've just upgraded it to 1.40 and I experienced exaclty the same problem. Did you find any answer? Is there a workaround?

basic questions about rom, extrom, protocol and radio

Hello
I had a few questiosn regarding the rom version, radio version, protocol version and extROM version
does the Radio version contain the UMTS & GPRS radio acccess stuff which would mean that it contains the umts/gprs protocols, in that case what does the protocol version contain.
i guess the rom version contains the updated version of windows mobile 5.0 with new bells and whistles thrown in , or the last windows os improved?
wha tis the extROM version?
os there any way to update the bluetooth & wifi functionality, would that be a part of the ROM version?
utms and even edge is a 100% different frequience thing
so a device cant with software be changed to support it more
then it can be changed to recieve tv or hdtv or alien radio broadcast
wm2005 for devices which was not made for wm2005 are leaked beta versions which will never be released because wm2005 devices use flash to save data not ram like wm2003 devices
the flash they have is slower
and the roms are not optimised
bluetooth is a part of the rom but ppl can use other bluetooth stacks if they start out with ms bluetooth stack they can change it to broadcoms
wifi is a mix of wifi drivers which depend of if wifi was a part of the device or a addon sdio card
plus the wifi access software which you yourself can upgrade
thanks for the reply
what does upgrading the radio version do?
and upgrading the protocol version do?
do the two upgrade the gsm functionality??
i have got the XDA Exec, does it use WM2005 or WM2003, i guess the windows CE 2003 is ce4.0 based and the windows mobile 2005 is ce5.0 based, correct?

NO GPRS since upgraded to official WM6

I tried all official and coocked WM6 ROMs, none of them connect to my T-Mobile GPRS !!!!
Before the Official rom released I was using vp3G ROM, Sleuth ROM and most of the ROMS available in this website without any problems... Once I installed the official WM6 there is no internet using GPRS conection. Then I tried different WM6 roms but same problem
here is my settings
T-Mobile USA
wap.voicestream.com
Radio: 1.48
Please help.
kokowawa said:
I tried all official and coocked WM6 ROMs, none of them connect to my T-Mobile GPRS !!!!
Before the Official rom released I was using vp3G ROM, Sleuth ROM and most of the ROMS available in this website without any problems... Once I installed the official WM6 there is no internet using GPRS conection. Then I tried different WM6 roms but same problem
here is my settings
T-Mobile USA
wap.voicestream.com
Radio: 1.48
Please help.
Click to expand...
Click to collapse
The Official Rom comes with Cingular Proxy preconfigured. Some where in the Programs screen you have a utility to disable the default Proxy. That could be the reason for no GPRS on your 8525
surveyganga said:
The Official Rom comes with Cingular Proxy preconfigured. Some where in the Programs screen you have a utility to disable the default Proxy. That could be the reason for no GPRS on your 8525
Click to expand...
Click to collapse
I tried to disable the proxy then soft reset, but still same problem
You need to put in the Tmobile internet settings.

Hermes WIFI with WM6 (WPA+TKIP+cert)

Hello, i'm a newbie user of a HTC Hermes ( TyTN ), and have some problems with the wifi sitted at my workplace.
There is no problem to connect using WM5, but i can not connect using WM6 using WPA TKIP access point with certs and PEAP. I've already installed the certs used in WM5, i can see the SSID ( is hidden without certs).
Is there any bug in this firm or radio version ?
Mobile 6 Proffesional
OS:Windows CE 5.2.1437
ROM: Schap's 3.54b
Radio version : 1.54.30.10
Protocol version: 32.87.7020.20W
Thank you very much in advance, and sorry for my bad english.
I had the same problem. After some google search, I found out disabling the proxy is the solution for this problem. Now I am online connecting to my LAN network.

Swiftblade7 external gps com port problem

Hi Guys
wonder if anyone can help me? I've recently put on swiftblade 7 rom and to put it simply, its awesome however, for reasons I won't bore you with, I need to use my external GPS. So I paired up the devices fine, went into settings and pointed windows HARDWARE PORT to the BTGPS port and exited settings. I then go back into External GPS and its defaulted back to (none) again....
any ideas why it keeps defaulting and not changing? Its like its missing a "save" function or something ...
Operator: SwiftBL v7 full
Rom: 1.93.405.1 WWE
date: 09/21/2008
Radio: 1.00.25.05
Proto: 52.29.25.12h
Monty Burns said:
Hi Guys
wonder if anyone can help me? I've recently put on swiftblade 7 rom and to put it simply, its awesome however, for reasons I won't bore you with, I need to use my external GPS. So I paired up the devices fine, went into settings and pointed windows HARDWARE PORT to the BTGPS port and exited settings. I then go back into External GPS and its defaulted back to (none) again....
any ideas why it keeps defaulting and not changing? Its like its missing a "save" function or something ...
Operator: SwiftBL v7 full
Rom: 1.93.405.1 WWE
date: 09/21/2008
Radio: 1.00.25.05
Proto: 52.29.25.12h
Click to expand...
Click to collapse
Hi Monty... if I am not mistaken, you need to set it to a Serial port for the external GPS to work.. Cheerz
correct. Already done - com0 (although, I have tried others and no success)
HI Swift, not sure if you were investigating this issue. Wouldn't bother now as I'm the only one that seems to have complained about it and my diamonds just gone in the bin anyway (now using an Omnia, yes i can have music AND european maps for my satnav!).
Thanks for imo the best rom out there.

Categories

Resources