Related
Hi, I have the T-Mobile MDA Vario. I was wondering if anyone can tell me step by step how to convert all configurations to US T-mobile. Right now it has all German Configs for MMS & Internet. Do i do a full device reset and download the newest version Rom for T-Mobile US? Im a rookie at flashing & i read some bad stories of data crashing..HELP ME PLEASE!!!
My Rom Version:1.3.13.5 ENU
Rom date: 9/29/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtRom version: 1.3.13.116
Model No: WIZA200
AIM: TricksR4KidZ5
Wizard Custom ROM 2.17 for T-Mobile MDA Vario
Hi. I've been lurking in this forum since I bought my US T-Mobile MDA (Vario) last week. I love it. (The Vario and this forum). I was looking for ROM's too, and installed a couple before I found the Q-Tek 2.17 ROM. It was cool, had some significant enhancements over the original T-Mobile ROM, but after installing it, I kept looking around and found a custom version that has the look and feel of a T-Mobile ROM. It has some useful tweaks and it's an english ROM that's pre-configured for T-Mobile USA. The link is here.
http://forum.xda-developers.com/viewtopic.php?t=44631
I like this ROM. After installing it, GPRS and everything is already configured and the battery life is lasting so much longer. The irritating things are disabled and there are some nice tweaks like the Edge icon when it's an Edge connection (So you know if it's EDGE or GPRS). The only thing I've noticed that's missing from the original ROM is the T-Mobile hotspots util, but I don't know if you care about that. I think you'll prefer it since it's in English and the 2.17 ROM.
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!
No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!
I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.
Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...
Thanks for the replies! Anyone else with a positive experience?
I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?
Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...
For those who successfully upgraded their P3600 to WM6, what technique did you use?
I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.
PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.
Thanks Thomas,
That's great information!
generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....
I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.
if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.
I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Click to expand...
Click to collapse
Bet we don't see a JasJam Telstra tho'....
gomax said:
Bet we don't see a JasJam Telstra tho'....
Click to expand...
Click to collapse
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
I suspect we will never see a JasJam ROM as imate have dropped HTC as a supplier. I doubt they will got to the trouble of providing WM6 and Telstra won't do it on their own.
The original Dopod SEA WWE works great and also automatically sets up Telstra's settings. It also has the bonus of not being carrier branded and pleasingly less green than the HTC ROM.
Thanks a Million Guys.
I am sure I-mate will never have an update for JasJam especially with a WM-6 ROM.
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
So NextG is a definite go with this rom? Should I see an H in the menu or just 3G??
Greg
I just have the 3G icon to start off with, then it goes to H when i start up the data connection.
Only thing i had to do to get it going was set network type to WCDMA
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
http://www.imate.com/support/PPC_OP_Settings/Australia_Telstra.CAB
drgmt said:
Hi Guys.
Here is the way to get "everything telstra" working on your black dymond.
Step one
Install the attached telstra my place cab. Then proceed as follows....
Under connections select new connection.
Name it Telstra Internet
Click the modem tab. Click new.
Name the connection Telstra Internet
Select a Modem (GPRS, 3G)
access point name telstra.wap
Click finish
Set proxy to 10.1.1.181 port 80
HTTP should be 10.1.1.181:80
Then open telstra my place icon and navigate to foxtel. This should work.
Note to access non telstra sites you might need to disable proxy in my connections
Hope this works guys. pm if any trouble.
drgmt
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/124404-post8.html
I flashed this ROM on my Telstra i-mate Jasjam (though I use Optus) . Works great! Network Wizard automatically set up all Optus settings. Now get 3G and HSPDA speeds and MMS settings all work! Thanks to all for sharing their insights and making our devices better than ever!
new official (really official) ROM!
AT&T just released their official WM6 ROM. I won't be able to load it until tomorrow. If anyone does, please post here if it's any better than the original "official" ROM.
http://www.america.htc.com/support/8525/software-downloads.html
Imate Telstra Rom Windows Mobile
Hi spoke to a support person about a week ago and he reconed a new rom was coming for Telstra customers for Mobile 6
Hi all
Sorry if this question might sound silly but i am new to this.
I have recentley aquired a imate jasjam:
ROM version; 1.31.305.2
ROM date; 09/08/06
Radio version; 1.20.31.10
Protocol version; 32.52.7020.00H
ExtROM version; 1.31.305.103
now this is set to telstra settings
I however have a three network and dont know the setting to set it to work with three network. when i rang 3 support they told me i need to get the dopod pro which works on their network.
I though the dopod pro and imate jasjam where the same phone but they tried to convince me it is different and advised me of not trying to put dopod software on jasjam as it might lock the phone.
So now i am totally confused
Do i update my imate with the WM-6 ROM from above link? if so how...
thnx in advance for any help
Official imate WM6
Here is a link to the official release of the imate WM6 release for the Jasjam: http://clubimate.com/jasjamsupport/JASJAMAU.html
You can then configure your settings for any operator after that. And you are right - the 838pro and jasjam are the same!
I would recommend flashing the Dopod rom or a Schaps rom. These have Network wizard which will setup all your settings. I am on 3 also and use Schaps rom. Works perfectly.
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
shaker22a said:
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
Click to expand...
Click to collapse
Follow the guides available and you won't go wrong.
It was daunting at 1st for me, but after you'v done it once it's easy!
There is a Telstra WM6 rom
I'm a bit confused by some of the comments above. There is a Telstra WM6 rom available on the Club iMate site. I had downloaded and installed it successfully but unfortunately it is not supported by BB Connect 4.0.0.9x so I went back to the Dopod Asia build.
Another update from 3Aus - 6 months old, but not listed anywhere?
Strangely, I can't see any mention in the forums of the 3Aus 838pro update available from 3... They mention version 1.30.707.8, which looks like it's supposed to be newer than the one mentioned above (which ends in .707.4)... It's been available for a while, and I don't know how it compares with some of the cooked ROMs available.
http://www.three.com.au/Dopod (Select 838pro from the dropdown, then "Planet 3 software upgrade" link, then another "Planet 3 software upgrade" link... Page contains download and install instructions, and some )
Direct link to download: http://203.210.124.136/3/software/Dopod_838_Pro_p3.exe
Supposedly, according to an sms I got maybe 6 months ago, this update is supposed to enable streaming content on Planet3. I haven't tried it yet, but will be doing so in the next few days. Has anyone else had a look at this? It's not listed in the wiki either, as far as I can see... (I'm about to try it out because of not being able to get Planet 3 streaming under WM6.1...)
Edit: Never mind, this is a WM5 update. We don't have it listed anywhere, though, so I'll add in some details about it...
ROM Version 1.30.707.8 Date 12/13/06
Radio: 1.27.30.10
Protocol: 32.60.7020.06H
SPL: 1.09
IPL: 1.01
It does have streaming under Planet 3 working, though. I'll try to figure out how it works.
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Click to expand...
Click to collapse
Hi there,
Total noob here. My dopod is running windows mobile 5 - will this rom upgrade my OS to version 6?
Thanks in advance
This link is not working, is there any other linkwhere i can download
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4. Currently i have 3.54.707.3 Aus Hutchison - 3 Network ROM.
Can any one send me the link to download.
hey everyone i recently purchased a cingular 8525 with wm5 and decided that it would be a good idea to upgrade to wm6 (don't know exactly why but i did it) anywho... after i did so i found out that the wifi does not work anymore and i'm new at this so i have no idea what could possibly be the prob. Before i upgraded the os, wifi worked like a charm didn't really have to configure it or anything just detect settings and available wireless signals etc and that was it. pleeeez ppl who ever knows what i'm talking about please pretty please help cuz this is annoying me
Hi
Which ROM did you upgrade to, also, did you flash HardSPL before that? which Radio ROM are you running, and does the WIFI actually turn on when you use the comm manager?
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
After flashing roms I had the same problem..make sure under the tab network adapters the line that says My network cards connects to..is set on internet..most roms start out with it on work..that change always works for me
So i deceided to downgrade the rom from wm6 to wm5 and yes apparently it has something to do with the rom version because my wifi connection works again!! with the old version which is wm5, but the moment I upgraded again to v6 it stopped working and like I said everything in the settings seems to be working fine, there’s just no internet, I should just be happy with the old version of windows mobile but version 6 has some features that I really liked does somebody know why this is happening? and if yes is there a solution? It might b more obvious than I think but I really don’t know so I really appreciate those who post help and advise thank you!
Put it back to WM 6.0..we will figure out what is wrong. There are alot of really good people on this forum and the answer to your problem is here. WM 6 is so much better.
Thanx for the support and the advise. So i installed another version of wm6 this one seems to be for Dopod but at least the internet works!!, the one i previously installed was an official version of wm6 for cingular which like i said before, for some strange reason i was not able to use the internet with wifi my only concern with having this Dopod version is that... well... its for the Dopod and does not come with the features that cingular offers to AT&T/ cingular users like myself. But then again it seems like everything else works just fine I just wonder why the cingular version doesn't work?
Sounds like your a little new to this. Here one of the golden rules:check out the hermes wiki and learn alittle about the flashing process and the different roms and their settings. There are alot of good roms out there that set up for ATT users, like K's Rom ,which is what I've been using for months. Works fine right after flashing. It has the right amount of programs and tweaks. Do alittle research and it will be worth it. It may take a couple different roms to find what you are looking for. Make sure you HardSpl your phone(the guide of flashing is in the wiki) Good Luck
i second blackout128's post
read the wiki
install hard spl
flash to your hearts content!
although, make sure you read the threads first! good luck and welcome to hotel d'hermes!
siskus said:
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
Click to expand...
Click to collapse
Had same problem with WIFI using (RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe) ROM. Had to disable the Cingular proxy. Select: START-PROGRAMS-PROXY MANAGER-DISABLE PROXY. After that, was able to connect to the internet with WIFI.
I pretent to go whitin some time to Brasil for a long time as in the past I have had quite a few problems with the settings there I start to believe that it can be the best change to prevent this by loading a rom which is used bij people in Brasil, at least the problems which I made have there will be known.
Are there people from Brasil here which use the Diamond overthere if so which rom do you use, I don't mind if it is in Portuguese I can understand it perfectly.
Thanks in advanced
Willem
U can use this http://forum.xda-developers.com/showthread.php?t=439102
I uses Dutty´s ROM as you can see in my signature with radio .08 and have no issues here in state of Sao Paulo.
I tested radios .03,.05,.07,.08,BS14 and for me .08 its the best option.
I already used my Diamond in TIM and Oi networks.
I'm using Duttys ROM too.
Lite 2.9 one + 07 radio + 1.40 HardSPL
Everything but the camera is working nicely here.
The H and E data connections are ok too.
{}s
CreativeBR
Im from Brazil
Me and my wife are using the ark666 ROM: http://forum.xda-developers.com/showthread.php?t=439102
Very stable, fast and in portuguese, better than Diamond Project v3.3 ROM, that is in portuguese too, but kind unstable and slow.
It cames with the essentially software needed. Use the TF3D embedded to change the Touchflo3D to Brazilian Portuguese.
The only thing missed is the network setup wizard for Brazilian operators, so you have to manually configure the network settings.
leocandrade said:
The only thing missed is the network setup wizard for Brazilian operators, so you have to manually configure the network settings.
Click to expand...
Click to collapse
This wizard for Brazilian operators is this availleble in other roms? I mean if it is then it must be possible to whitdrawl the wizard and then you can use whatever rom.
Willem
Dutty's latested roms fully detect brazillian operators.
You could try his connection setup avaliable here
http://forum.xda-developers.com/showthread.php?t=411707
at second post as downloable cab.
Give a try and report feedback.
flitzjoy said:
Dutty's latested roms fully detect brazillian operators.
You could try his connection setup avaliable here
Click to expand...
Click to collapse
Thank you this is what I was looking for, as soon I now or its working whitout changing my rom I will let you now.
Do you now or this connection manager works whit more HTC phones, I gave my Trinity to my daughter and she wants to use it aswell in Brasil this was the phone which gave a lot of connection problems when I was in Brasil 1 year ago.
Willem
This cab is made for Diamond. I dont think it will work in others HTC devices.
SwiftBL 7.5 ROM
Hello,
I use this one http://forum.xda-developers.com/showthread.php?t=408109 in Brazil. Have no problem with it. Camera, calendar, emails, everything is working fine with this ROM. It can't recognize the brazilian's operators though. I will also try the wizard from Dutty's to see if it work. I use the radio .05 and it's ok. I realy liked this ROM, but it seems that SwiftBL is no longer working with his ROM.