Related
I upgraded to WM2003SE a while back and at the time had an Orange SIM in my XDAII and my 02 SIM in my E200 Smartphone. The extended ROM I used was Orange specific and contained all the necessary GPRS Configs etc
Anyways, I've now got a C500 with my Orange SIM in it and so the 02 Sim is back in my XDAII and I'm looking for a good External Rom dump that contains the UK 02 GPRS/WAP/MMS Configs etc and is compatible with WM2003SE.
Can anyone point me in the direction of one, I have looked and tried one or two but none have the correct configs for 02's GPRS service (Pay monthly not PAYG).
TIA
Did you get anywhere with this, Darren? I'm just wondering whether to upgrade my O2 XDAII to WM2003SE but the lack of dedicated O2 Ext.rom files (as far as I can tell) is putting me off.
I didn't but don't let that stop you, the SE upgrade is well worth it. I just removed all the O2 specific rubbish from the Ext ROM and it's fine.
Thanks for the reply.
I'd love to upgrade but without the O2 auto-config software in the ExtROM I wouldn't have a clue where to start configuring all the network, SMS, MMS etc settings for O2 pay monthly. Do you know of a guide or something somewhere?
Secondly, I searched earlier to try and find out which was the best ROM to use for those of us in the UK, but there didn't seem to be a definitive answer. Would you mind telling me which ROM you used and where you got it from if you're happy with it? I need Bluetooth headset, BT GPS, BT ActiveSync, speakerphone to work perfectly to consider upgrading. Currently my XDAII works like a charm with ROM 1.72 but some people seem to have had trouble with the SE upgrade and Bluetooth.
Thanks a bunch in advance.
I use all those BT functions alos, I used the 2.02 ROM available at the beginning of this thread.
I've left the auto config files in the Ext ROM so there is no need to manually configure anything. I have had zero issues with it since the upgrade I'm happy to upload my Ext ROM to an FTP if you want it?
The only critical noe I found was to remove the 'TPDisable' entry in the Ext ROM when performing the upgrade as you receive a lot of 'This isn't designed for WM2003SE' messages and with TPDisable enbled you can't click OK!
griffog said:
I use all those BT functions alos, I used the 2.02 ROM available at the beginning of this thread.
Click to expand...
Click to collapse
Forgive me if I'm being a bit fick, but I can't see where you mean. Have you a ROM available through your pocketgpsworld.com website? Or is there only one 2.02 ROM available and I can download it from this site's FTP? I thought the 2.02 ROM was the Chinese one.
griffog said:
I've left the auto config files in the Ext ROM so there is no need to manually configure anything. I have had zero issues with it since the upgrade I'm happy to upload my Ext ROM to an FTP if you want it?
Click to expand...
Click to collapse
I didn't know it was possible to upgrade the OS ROM without touching the ExtROM. I'm not a noob with the XDAII, but I've found the myriad threads and discussions on the question of 2003SE upgrades very confusing! Since there seems to be no obvious single solution I haven't known where to start.
If you have a working ExtROM for the XDAII on O2 UK and you wouldn't mind uploading it somewhere (this site?) I'd be very grateful. If you wouldn't mind pointing me to the main OS ROM image that you used as well then that'd be groovy too.
griffog said:
The only critical noe I found was to remove the 'TPDisable' entry in the Ext ROM when performing the upgrade as you receive a lot of 'This isn't designed for WM2003SE' messages and with TPDisable enbled you can't click OK!
Click to expand...
Click to collapse
I guess that's achieved by editing the config file in the ExtROM once it's all installed after an upgrade?
Sorry, I thought this was the original WM2003SE thread! The download I used is at the beginning of this thread.
It's a while since I upgraded mine, I had thought the Ext ROM remained intact but reading the thread instructions apparently not. Sorry I can't help more but as I say it's some months sisnce I did it!
Aaah. OK. Thanks again, but I think I'll leave it in that case. I don't yet feel brave enough to start messing about with home-cooked ExtROMs if you don't have yours handy. It was good of you to offer though.
Hi all
I've taken a good long read throughout this Upgrade to WM6 subforum, I like the idea of it a lot and want to go ahead and do it, but having never re-flashed a PDA Phone before (I've done my PSP lots of times tho but thats easy in relation) I think its very difficult to find anywhere to even begin from!
Can anybody just give me a total-overall-topdown-summary-breakdown of the steps I need to perform on a fresh T-Mobile MDA Vario II. Doesn't have to be in detail, just all the basic steps required.
The forums, whilst being great for regulars seems to just confuse me the more I read them because of all the new issues raised and the individual cases on different vendor models of the Hermes.
My phone isnt a new Vario II, but I've done nothing to it except install apps, and it is showing REALLY old bootloader (I think 1.04) and radio versions (cant remember) in the system information. I'm presuming it'll require a radio upgrade at the least.
I would really appreciate a summary of everything and I think all newbies would benefit a lot.
Specific areas of confusion and concern -
-I would like to be able to grab the existing memory contents as an image off the phone just in case I choose to return to WM5 in future, and have a way of easily restoring it with no fuss. Exactly like ghosting a PC will return the whole OS, and all files and apps. Any recommendations how?
-I cant choose which custom third party WM6 ROM to use or just use HTCs official one if I should.
-I dont know if I'll still be able to use TomTom Navigator and some games plus I'm running TCPMP with the YouTube FlashVideoBundle. Will this still work?
-Should I upgrade the radio and bootloader before thinking about moving to WM6? Is there any other areas I should be flashing/rejigging before upgrading? Eg whats this about the ExtRom and gaining more space (obviously good)?
-The vendor lock on the firmware concerns me. Is there one on the UK T-Mobile MDA Vario II? Also about what I read somewhere about how disabling the lock with one of your tools might brick the phone (or am I getting confused somewhere along the line).
-As the community moves on with further developments, the divide between n00bism (me) and l33t (you) increases - case in point - kitchens??? I'm not saying though that it shouldn't happen!
Many thanks for everybodys work.
Stu
I'm basing my comments on Vp3G's ROM,
Begin by reading over
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=65&Itemid=26
(1) MUST DO: Download and install SPL (Bootloader) version 2.10.Olipro (HardSPL v7)
(2) Optional: Download and install an updated Radio. I'm using 1.54.07.00
http://forum.xda-developers.com/showthread.php?t=334697
Pick out a ROM and download it. I'm currently running vp3G's
ROM version: VP3G's v3.62
http://forum.xda-developers.com/showthread.php?t=334946
Install the ROM.
Study your phone, read, study your phone, read. Very soon, all of this will become second nature to you.
Heliosphan said:
Specific areas of confusion and concern -
(1) I would like to be able to grab the existing memory contents as an image off the phone just in case I choose to return to WM5 in future, and have a way of easily restoring it with no fuss. Exactly like ghosting a PC will return the whole OS, and all files and apps. Any recommendations how?
(2) I cant choose which custom third party WM6 ROM to use or just use HTCs official one if I should.
(3) I dont know if I'll still be able to use TomTom Navigator and some games plus I'm running TCPMP with the YouTube FlashVideoBundle. Will this still work?
(4) Should I upgrade the radio and bootloader before thinking about moving to WM6? Is there any other areas I should be flashing/rejigging before upgrading? Eg whats this about the ExtRom and gaining more space (obviously good)?
(5) The vendor lock on the firmware concerns me. Is there one on the UK T-Mobile MDA Vario II? Also about what I read somewhere about how disabling the lock with one of your tools might brick the phone (or am I getting confused somewhere along the line).
(6) As the community moves on with further developments, the divide between n00bism (me) and l33t (you) increases - case in point - kitchens??? I'm not saying though that it shouldn't happen!
(7) Many thanks for everybodys work.
Click to expand...
Click to collapse
(1) No idea, but why would you want to return to WM5. Once you have WM6, you'll never go back. I'm sure there is probably a WM5 somewhere.
(2) I use http://forum.xda-developers.com/showthread.php?t=334946
(3) Hit and miss. But probably.
(4) Upgrade the boot loader. Radio is optional, but I recommend it to.
(5) News to me
(6) Welcome to the world of custom, "free", ROMS. You like it or you don't. Download, support and enjoy, or move on
(7) You're Welcome
gwtx2 said:
I'm basing my comments on Vp3G's ROM,
Begin by reading over
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=65&Itemid=26
(1) MUST DO: Download and install SPL (Bootloader) version 2.10.Olipro (HardSPL v7)
(2) Optional: Download and install an updated Radio. I'm using 1.54.07.00
http://forum.xda-developers.com/showthread.php?t=334697
Pick out a ROM and download it. I'm currently running vp3G's
ROM version: VP3G's v3.62
http://forum.xda-developers.com/showthread.php?t=334946
Install the ROM.
Study your phone, read, study your phone, read. Very soon, all of this will become second nature to you.
Click to expand...
Click to collapse
That's basically what I just did last night after getting my 8525. I did the unlock before the above tho.
pretty easy and quick.
now I need a keyboard skin that is grey... schap's version (I think it was his) does not work for me dunno why.
Wow!
Thanks guys that was lightning quick!
I'll take a proper ganders at your responses tomorrow.
Thanks
Stu
ikkoku said:
That's basically what I just did last night after getting my 8525. I did the unlock before the above tho.
pretty easy and quick.
now I need a keyboard skin that is grey... schap's version (I think it was his) does not work for me dunno why.
Click to expand...
Click to collapse
go to programs\advanced config (or system tools, cant remember)
Find advancedconfiguration options, go to keyboard, then select Cingular out of the list
I had to do the same thing on schaps with my 8525
heheheh...this is post # 69 for me!
intrglctcrevfnk said:
go to programs\advanced config (or system tools, cant remember)
Find advancedconfiguration options, go to keyboard, then select Cingular out of the list
I had to do the same thing on schaps with my 8525
heheheh...this is post # 69 for me!
Click to expand...
Click to collapse
are you talking about system tools\ htc custom?
it's already on Cingular
Also, anyone know how to get rid/change the second startup screen (Blue and Green with Windows Mobile)
Whoa, subject hijack...
...oh well, not to worry.
Anyway, in response to gwtx2, I might want to go back because some little thing I need might not work, and I might require some T-Mobile support, I'm sure they'll not touch a phone thats been reflashed with unofficial fw.
Also T-Mobile might release an official WM6 Hermes upgrade too.
Besides, have you never heard of this 'take backups = a good thing' thing?
Besides, it must be relatively easy, how else would all these custom hermes firmwares be built from?
How do these guys do it?
Thx
Stu
sorry .. didn't mean to hijack
Upgrade process.
gwtx2 et al.
Many thanks for pointing me towards MrVanx's Hermes Guide site.
Are you sure its fine to be using the VP3G firmware for my phone given it was derived from and is in general use with a US model AT&T 8525 (A hermes 100)?
My phone is a UK model T-Mobile MDA Vario II (A hermes 300)? Thats three differences I see (Country, operator firmware, hardware revision)!
Although MrVanx guide says the Vario II is suitable on the first page, I'm thinking its worth going for a different ROM derived from the Vario II for luck.
If I choose to go with another that was derived from the HTC official one, I'm presuming the general instructions are the same then?
eg.
#1 take down settings and xfer files.
#2 reflash HardSPL bootloader
#3 reflash radio version
#4 reflash ROM.
#5 restore settings & apps.
Am I right?
Many thanks again.
Done some stuff!
Hi all again.
Right, I've been perhaps too brave for my own good, but it turned out well!
I've installed HardSPL 2.10.Olipro on my phone, plus I've gone the whole hog and picked a very up to date radio version 1.54.00.10, I think it was originally ripped from a french firmware, I figured a Euro fw would be best suited for my UK model Hermes.
I was right I think - I now see a good fast T-Mobile home webpage, and sites load pretty good once it finds it. I also tried YouTube on TCPMP player, that seems quicker but I couldn't be totally sure.
One point I should note - When running the RUUWrapper app, AutoDetect flashed up a YES NO question on the PDA screen to accept running the program. Problem is I didn't catch it in time, so instead it threw up an autodetect error. Now after closing RUUWrapper and re-running it, it never throws up the YES NO question any more in any radio flasher (even after rebooting the PDA and the PC)! Instead I had to choose the HardSPL tickbox and the SPL 2.02/2.10 fourth option down, to continue. Slightly concerning but it worked.
Now all I need to do is up to a WM6 firmware when I choose one, it's gone well so far so my luck is bound to change!
QUESTION PLEASE-
Does anybody know the T-Mobile UK 3G Cellular Line access point password? I know the username but would need to fill in the pwd. The username is t-mobile but the pwd is ****** and wont copy paste of course! Its in the bit where you see the access point address - general.t-mobile.uk.
Many thanks to all for helping me this far.
Stu
Heliosphan said:
gwtx2 et al.
Many thanks for pointing me towards MrVanx's Hermes Guide site.
Are you sure its fine to be using the VP3G firmware for my phone given it was derived from and is in general use with a US model AT&T 8525 (A hermes 100)?
My phone is a UK model T-Mobile MDA Vario II (A hermes 300)? Thats three differences I see (Country, operator firmware, hardware revision)!
Although MrVanx guide says the Vario II is suitable on the first page, I'm thinking its worth going for a different ROM derived from the Vario II for luck.
If I choose to go with another that was derived from the HTC official one, I'm presuming the general instructions are the same then?
eg.
#1 take down settings and xfer files.
#2 reflash HardSPL bootloader
#3 reflash radio version
#4 reflash ROM.
#5 restore settings & apps.
Am I right?
Many thanks again.
Click to expand...
Click to collapse
The general answer to the first part is it doesn't really matter which provider gave you your Hermes as long as it is one. (Actually, there are some differences between Hermes models but honestly don't worry about that for now.)
Don't worry about going for a ROM that's derived from T-Mob. Basically, all the different network providers get given the latest working versions of Windows Mobile from time to time for them to either check and have a play with or to customise and release as an upgrade or in the newest issues of their phones (or as a download for current users).
My Hermes is Orange UK (i.e. SPV M3100) but I've ended up at various times having WM6 versions derived rom AT&T, T-MOb, HTC et al. The only thing that matters is that it's Windows Mobile for the Hermes.
As to going back to WM5, I think it's worth having the original ROM about. If you search around the Hermes Wiki (I'd do it but it's late and I honestly can't be bothered, soz!) you'll find a list of original ROMs available for download. Note your current version and go download it so it's there ready for you to pit back on should you ever want to. (Warranty-claim time can be a good time for that.)
I'd suggest the following as a routine, myself:
1. Note down any details you might need later such as ROM version etc. Anything that comes up briefly after soft-reset or in Device Info and About in settings and any network setting for acessing GPRS or 3G etc.
2. Download the OliPro bootloader and install. The reason for this is to protect yourself as much as possible against problems.*
3. Have a gander at all the current cooked ROMs. I'd advise initially going for a lightish version as you can always add to it with cab files for your preferred extra bits.
4. Don't go for the Kitchens yet. It's best to mess with installing ROMs before trying to make one. The people eho run the kitchen threads, and the people who wrote the tools they use, have all worked very hard on making it possible for people who don't know much to make their own version of WM6 easily. It's easy but do it later.
5. Radio is absolutely optional and in most cases not very unnecessary. Like everyone else, I always want the latest of everything just in case there's a tiny, incremental improvement but if you have no problems with reception or internet access then worry about that last, if ever. Not every radio version is 'better' than the previous. The most recent version always has the highest version number obviously, but new versions are often brought out to deal with issues in a particular geographical area (usually country-specific AND network-specific, though it may or may not be better for other users elsewhere). The latest version of radio may be better for you but it might be worse and it might stop your internet of wifi working or something. Leave it for now if you have no issues with any kind of radio-related functions.
6. Installing your apps and settings is obviously something you'll do when the phone itself is done.
*There is another BRILLIANT touch to make sure you're extra super-safe and it's particularly easy: follow this link: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing . Basically, if you keep a copy of the a ROM image (renamed to HERIMG.nbh) on your microSD card (check the wiki item for specifics) then you can flash your phone at the touch of a button (well, two butons) from there in an emergency. even if your house loses ekectrical power during the flashing process whilst it's connectedto your PC and your Hermes won't even THINK of booting with half an OS flashed to it, you can very nearly always restore the ROM by flashing from the card.
It's all dead simple one you get into it, it's just a tad worrying before you start to take a scalpel to a new toy you just paid good money for.
You'll be fine mate.
Aha! Your success story must've appeared whilst I was busy typing!
Nice one. Ah well!
WOOOHOOO! I'm on WM6!!!
Many thanks chunkymunky for all your comments, its nice to know some fellow brits are on here too. Which phone do you have?
Its also nice to know that any hermes ROM will work on my phone, and I'm definitely going to have a go at this SD card reflash at some point now I'm gaining confidence in reflashing. Having said that, I have an old HTC Blue Angel (Orange SPV something) and that used to occasionally crash and do a full hard reset, erasing everything. My hermes has never done that so SD reflashing could be moot.
As it goes I'd like to share my experiences - late last night I flashed my Vario II with Fun_Keys 1.5.2 thats based on the 3.62 WM6 ROM. It reflashed fine, and I am utterly over the moon!!!! My phone has been reborn into something far better, faster in lots of areas. T-Mobile UK be damned for not releasing an official WM6 upgrade (yet) because WM6 is noticeably faster, looks really great with the shiny black theme. etc etc etc.
And because of all the work the ROM authors have done, I now get full on HSDPA access on my phone, I get the H icon on the top bar and everything! I know the H Icon being present now doesnt mean that I didn't get HSDPA before on my original WM5 firmware, but I'm pretty sure it is muchos faster.
Besides, a while back, a guy on T-Mobile UK tech support said I'd only get HSDPA when using my phone as a modem for a laptop, not via PocketIE on the phone itself. That made me feel I'd been a bit ripped off.
Oh and TCPMP with FlashVideoBundle works fine too and the phone downs YT Videos really quickly. I don't even have a serious problem with the ATI Imageon stuffs.
I'd like to mention that after a good while using radio versio 1.54.00.10 that it works fantastically on a UK T-Mobile MDA Vario II. HSDPA access included. Not unexpected since it was on 1.05.05.00!!!
Also TomTom works fine with two different bluetooth GPS receivers I have. WM6 has granted me access to the 'External GPS' option in the control panel I was missing originally (bloody operator firmware!) - as a result Google Maps can now use my GPS too!!!
As a techie by profession, I'm also loving all the extra tools Fun_Keys put on, like the advanced configuration tool, the task manager, regedit etc.
Countless other advantages I've gained has basically brought my phone a new lease of life, now I definitely dont plan to upgrade to a newer phone any time soon.
Who would have thought such a simple thing would bring such happiness!
The only disappointment was with having to up to ActiveSync 4.5 which killed my partnerships! No biggie, and nothing to do with WM6.
a big Thank You to the XDA Developers forum in general for your tireless efforts.
Stu
every time i tried to update the rom or radio i've got the
260 error...why is that?...i have a htc mda basic t-mobile...and its sim locked to austria....can somebody tell me how to unlock it?
Hi all....
1st.. dont flash any full stock ROM cause it includes SPL and radio those (most important radio) are the first thing to brick a device...
2nd.. many times i flash back to wm6 just to test the performance, is ok but you must to stripp the stock rom and guess what?... is hard... so i suggest if you all want to go back to wm6 use the stripped att stock rom
When I got my replacement AT&T 8525, it came with the AT&T WM5 ROM. I decided to downgrade to the Cingular WM5 version since I didn't like the AT&T one. I've been skeptical about upgrading to the official WM6 release, and I figured that since I have some time tonight that I would. However, I do have a couple of questions about how this will work since I had to install a different bootloader in order to make the change back to the Cingular WM5 version possible.
Currently my settings are:
ROM version: 1.34.502.1
ROM date: 09/21/06
Radio version: 1.40.30.00
HardSPLv7
My question are, do I need to modify my radio version before I upgrade? Also, should I modify my bootloader before I upgrade to the official WM6? Thanks.
Firstly good job on flashing HardSPL.
your radio doesnt need to be changed at all, but if you want to take a peek at my tests here that might help you choose an appropriate radio version.
For WM6 DEFINATLY go for it, the updated stacks/drivers/kernel are definatly faster than the WM5 versions.
Give the pandora naked 7 ROM a shot........it will FLY.
Your settings can be restored for AT&T using the HTC network wizard (easily found with a search).......and make sure you backup all your contacts etc... using PIMBackup (in the development forum).
I keep getting an error 264 connection error saying that the update utility cannot connect to my phone. I've followed all the steps. I'm not sure what I'm doing wrong. The only thing that sparks my mind that I don't remember occuring before is that when I plug my phone in via USB ActiveSync automatically begins, so I wasn't sure if I needed to disable that function or not since the instructions mentioned something about being sure that happens before installing the new ROM.
Any help? I'm still stuck here.
I just did mine (I am a brand new to all this) and I followed these steps word for word in this thread, adn man what a difference .
read these all the way through.
http://www.pocketpcaddict.com/forum...-unlocking-cid-unlocking-wm6-your-8525-a.html
http://www.mrvanx.org/cms/index.php?option=com_content&task=category§ionid=6&id=13&Itemid=26
Nates good people and willing to help although he is a caffeine addict
and after you upgrade the rom do this, but read it all before doing so
HTC plug in , great look for the 8525
http://www.pocketpcaddict.com/forum...ome-plug.html?highlight=HTC+Home+plug-in+v1.0
Oh i forgot, the HTC att WM6 included the radio upgrade to the 1.48. which works great.
Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.
Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...
Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.
Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now
Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.
spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...
---edit---
please delete this post
have fun with your spv
I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!
I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..
Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.
Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt
http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.
HI
i have kaiser 130
I tried few diffrent android version but with evry version phone cant connect to network sometimes he connects for few minutes but not longer. With windows everything ok
I tried:
Incubus26Jc's Super Eclair Lite 2.1
Warm Donut RLS 5 with Kaiser updates integrated including battery
Im using
HardSpl 3.34
radio 1.70.19.09 (tried 1.70.18.02)
Protocol 25.83.40.02h
Maybe someone had same problem and can help me?
Sorry for my english.
i just checked i was editing nbh for Warm Donut RLS 5 with Kaiser updates integrated including battery
and i was using esclair not donut. (dum) Maybe in this is problem....
I has the same problem too ,waiting somebody give a method to solve this
Have you tried an older radio, such as 1.65.21.18?
No because in guide:"How to replace Windows Mobile with Android (Guide)" (sorry i cant paste link because im new user) is recommended 1.70.x and better here it is "#2 Does your Kaiser have a relatively new radio rom? If not then get one. Recommended to have 1.70.xx.xx and up. "
if it is radio fault so why on winMO with same radio working?
And one more thing kaiser with android finds not 02 but BTCellnet (in the beginning O2 was BTCellnet )
The same radio suggestion was made to me several days ago while trying to get audio working in android (via HaRET). Upping to 1.70.xx didn't fix my issues, but 1.65.xx did.
If you are able to test it in WM, you must still have WM installed. Are you booting android with HaRET?
No i think HAret if you installing to sdcard but im installing not in sdcard.
im doing all by this guide go here to read.
xda-developers > HTC Kaiser: Tilt, TyTN II, MDA Vario III > Tilt, TyTN II, MDA Vario III Android Development
> How to replace Windows Mobile with Android (Guide)
Yes, I know the sticky thread to which you have now twice referred. I am asking how you know wifi works in WM if you have replaced WM with android as the guide leads you to do.
There is no danger it trying an older radio regardless of what the guide suggests. I would respectfully suggest that you give 1.65.xx a shot, despite what the guide says. If the older one works, then you have solved your problem. If it doesn't work, you can flash 1.70.xx back on and try something else.
I am running Incubus's Super Eclair on my device and wifi works flawlessly. I am also able to do BT connections and hear audio. None of these worked when I tried 1.70.xx, so I use 1.65.21.18 instead.
em not wifi iwth wifi every thing ok but mobile newtwork dosent work
Roger that. My recommendation still stands, however.
Trying the alternate radio will take you less than 5 min total including d/l time. You can find it linked in post #3 of this thread: forum.xda-developers.com/showthread.php?t=393182.
You could also try 1.71.09.01, which I see was posted several days ago.
thx m8 its working! just signal strength is bad but still....it works! one more time thank you m8!
m8?
What was your solution?
i have a similar problem. Cannot connect to the internet with 2g/3g, but wifi works. The latest rom did not solve my problem. Maybe i'll try older ones...
hi @all,
any news here?
I got the same problem.
At the moment I have running the version milanche has upped, because I thought it is running for him, so maybe it does also for me. but it doesn't.
forum.xda-developers.com/showpost.php?p=6570064&postcount=7
(sorry, as a new user I can't make a link out of this)
Everything seems to be fine except mobile internet.
Edit:
Maybe I should inform you that I already have edited my APN-Settings. And I really think they should be ok. On WM6.1 these settings are working.
And I like to mention that I'm booting from SD.
Kernel may be ?...
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
I have a problem with an i-mate K-JAM ... Some time ago I got this ppc but I went I installed a program and got stuck. Windows and the currency we now find no signal at all looking and looking and still not know what does. please help me
orcatrainer said:
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
Click to expand...
Click to collapse
same issue.APN data not working
Incubus26Jc's Super FroYo RLS15
radio 1.65.16.25
kaisimg-panel2-240x320-2.6.32-tilt-froyo-09-09-10_21.nbh
possible solution
I,m started MODEM application,tapped Connect-and looks like APN now working!
Let's see how long it works for you. I have the same setup as orcatrainer but mine works off and on some times. I must add, I have Simple Mobile. They are on the T-mobile network therefore, I cannot access 3G on my tilt. Playing with the 2G setting usually cause my phone to connect to APN until I turn the phone off. Then I have to struggle to get it to work again. I just put my sims back into my Blackjack 2 to access mobile data until this issue is fixed.
illegal2008 said:
I,m started MODEM application,tapped Connect-and looks like APN now working!
Click to expand...
Click to collapse
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
orcatrainer said:
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
Click to expand...
Click to collapse
in applications section-not in settings