What to do before warranty - Touch Diamond, MDA Compact IV ROM Development

First of all sorry if I´m doing things better not to do.
...but i´ve the problem that i´ve lost my 4gb internal storage. i think i did everything to get it back. but it did´t appear yet. it neither can´t be recognized by my pc as external storage device nor by the diamond itself as internal storage. i tried to farmat the storage and i flashed 3 different roms. nothing.
now i decided to to try it with warranty at o2. i put back the original rom from the o2 homepage.
is there anything that they can figure out that i did hardspl?
i do not remember if it was a unsinged or singed hardspl! is there any diference?
...so please if there is a god...tell me were my 4gbs are or what i can do to get them back...or that they can fix it as warranty case.
greetz
Michael
p.s. sorry for my english but i think you know what i mean.....

You need to flash the original SPL otherwise it can be expensive when sending back to o2 ...!
Search the Diamond section for SoftSPL and "Original SPL for warranty"! Hope it helps you a little bit!

dbalot said:
First of all sorry if I´m doing things better not to do.
...but i´ve the problem that i´ve lost my 4gb internal storage. i think i did everything to get it back. but it did´t appear yet. it neither can´t be recognized by my pc as external storage device nor by the diamond itself as internal storage. i tried to farmat the storage and i flashed 3 different roms. nothing.
now i decided to to try it with warranty at o2. i put back the original rom from the o2 homepage.
is there anything that they can figure out that i did hardspl?
i do not remember if it was a unsinged or singed hardspl! is there any diference?
...so please if there is a god...tell me were my 4gbs are or what i can do to get them back...or that they can fix it as warranty case.
greetz
Michael
p.s. sorry for my english but i think you know what i mean.....
Click to expand...
Click to collapse
Hi,
I've seen a couple of threads about users who had the same problem & they managed to fix it so as their 4gb storage was working/ showing up again.
So I dont think you need to go as far as sending it back for warranty.
Try searching the diamond forums & you should find at least 1 of the threads & read it & it should help, you should be able to fix this yourself m8
Hope this helps

polllux said:
Hi,
I've seen a couple of threads about users who had the same problem & they managed to fix it so as their 4gb storage was working/ showing up again.
So I dont think you need to go as far as sending it back for warranty.
Try searching the diamond forums & you should find at least 1 of the threads & read it & it should help, you should be able to fix this yourself m8
Hope this helps
Click to expand...
Click to collapse
thnax a lot.
i´m not sure but i think i read them too.
either had access to the storage when they connected the diamond to the pc or fixed it whith a hardreset. as mentioned that dosen´t work in my case.
greetz
michael

animelover said:
You need to flash the original SPL otherwise it can be expensive when sending back to o2 ...!
Search the Diamond section for SoftSPL and "Original SPL for warranty"! Hope it helps you a little bit!
Click to expand...
Click to collapse
thanx for reply.
What (blush) exactly is spl?

dbalot said:
thanx for reply.
What (blush) exactly is spl?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=416211
Read in there it'll explain all on spl etc...

Look at post #39 in this thread, if you must send your phone for repair. cmonex (thx for this) have make us a guide how to do!
http://forum.xda-developers.com/showthread.php?t=400950&page=4

o.k. i´ve sent my diamond back for warranty. before i did it i put the original splv1.93. on it. but there is another version v1.37. so wich one is the correct one. i think i did a mistake. aaaaaaaaaaaaaaaaarrr
does anyone knows where the hell is the differnence?
has it somthing to do whith the date? i bought it on 17.07.08 !

Related

I have crossbow rom and will share with anyone who can unbrick my Uni

I have the crossbow rom leaked and then removed from this board yesterday. Sharing the rom is risky, but I'll take the risk to get my Universal going again. I promise to share with anyone who can get my Uni going again.
I'll share the rom but I won't upload to this site or post links. We must protect this great site.
For my bricked Universal see this thread and what I've already tried:
http://forum.xda-developers.com/showthread.php?t=289878
Thanks.
Yes. I want it ;-).
Last time when my Qtek 9000 stuck in bootloader I installed the bootloader again and the he came alive again.
Jorry said:
Last time when my Qtek 9000 stuck in bootloader I installed the bootloader again and the he came alive again.
Click to expand...
Click to collapse
I wish it was stuck in bootloader. But the screen shows nothing no matter what I do.
As I managed to brick it when upgrading the bootloader I'm thinking I've managed to delete the bootloader...
I agree with jorry reflashing the bootloader can help, it was the soultion for me
poussin69 said:
I agree with jorry reflashing the bootloader can help, it was the soultion for me
Click to expand...
Click to collapse
Thanks, but tried many many times. The PC just doesn't see the device and upgrading bootloader or rom just fails.
if u wrecked youre bootloader i think u have a problem. the only way to flash that rom is to get it out of youre universal and then reflash it using an hardware rom programmer unit.
i doubt it someone is able to help u with this.
good luck
Crossbow
And where to get the Crossbow ROM now ;-)?
So, if its totally bricked then you won't be needing the crossbow rom any more so feel free to send it to me ;-)
I think if you have really nothing on the screen you will be forced to do a RMA
As the others have said there are instructions how to recover it but if you haven't managed it via them then I am afraid it might be a RMA.
You are welcome to PM me with details about the location of crossbow too btw
Re: bricked phone
hey i was wondering if this new crossbow you installed bricked your fone? does anybody know if this is the same version faria is working on?
LovnGrlyGrlz said:
hey i was wondering if this new crossbow you installed bricked your fone? does anybody know if this is the same version faria is working on?
Click to expand...
Click to collapse
No not at all. My Uni was bricked long before crossbow appeared. Its been sat in a dark cupboard for 6 months and I only became interested in unbricking it to try crossbow. Sadly I've given up on this one, but glad all other Uni owners have the chance to use crossbow now.
Anyway my current phone is a Wizard so I'm following the Chinese ROM conversion project with great interest.
bigyellowdog said:
No not at all. My Uni was bricked long before crossbow appeared. Its been sat in a dark cupboard for 6 months and I only became interested in unbricking it to try crossbow. Sadly I've given up on this one, but glad all other Uni owners have the chance to use crossbow now.
Anyway my current phone is a Wizard so I'm following the Chinese ROM conversion project with great interest.
Click to expand...
Click to collapse
Stupid question perhaps, but did you ever consider borrowing someone else's fully charged battery to see what happens? A device does not usually die from doing nothing, but a battery might.
Also try to upgrade on radio rom sometimes it bahaves the same as you have mentioned when radio rom is corrupt

Better Safe than Sorry - Do Not Want to Brick My Phone

I very much want to upgrade my O2 Orbit Rom to either WM6 or the B&B developed by Tom. Right now it apparently does not have the UK WM5 on it; according to the Ebay seller I bought it from I would have to go to the Hong Kong site to get an "official update" but the seller claims it would be better not to do so as people are reporting losing their radio and bluetooth. So I have read and re-read through these threads. I hear stories of phones not working after being flashed so I want to be super cautious. Here is what I think I do:
1. Run USPL and wait 5 - 10 minutes until the computer reboots itself.
2. Run either RUU for Tom's B&B or run RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
for the UK WM6 upgrade.
And I should be upgraded, right?
If I end up with huge problems, I think I can revert back to the original factory ROM with the file called:
Arteimg.nbh
But how do I run a nbh file?
Which OS is least likely to cause problems?
Please be gentle with me - I'm a 51 year old woman who is in love with my Orbit and can't live without it so I don't want to take any chances to turn it into a brick. On the other hand, I'd really like to have WM6 and can't get it from the UK d/l site because my S/N matches the Hong Kong site. I live in the US and I'm not sure if I want a Hong Kong OS. I have honestly read through these forums and tried to get all my answers here .... but I just want to double check before I make a big mistake and blow up my phone. Thank you all.
Cinamon said:
I very much want to upgrade my O2 Orbit Rom to either WM6 or the B&B developed by Tom. Right now it apparently does not have the UK WM5 on it; according to the Ebay seller I bought it from I would have to go to the Hong Kong site to get an "official update" but the seller claims it would be better not to do so as people are reporting losing their radio and bluetooth. So I have read and re-read through these threads. I hear stories of phones not working after being flashed so I want to be super cautious. Here is what I think I do:
1. Run USPL and wait 5 - 10 minutes until the computer reboots itself.
2. Run either RUU for Tom's B&B or run RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
for the UK WM6 upgrade.
And I should be upgraded, right?
If I end up with huge problems, I think I can revert back to the original factory ROM with the file called:
Arteimg.nbh
But how do I run a nbh file?
Which OS is least likely to cause problems?
Please be gentle with me - I'm a 51 year old woman who is in love with my Orbit and can't live without it so I don't want to take any chances to turn it into a brick. On the other hand, I'd really like to have WM6 and can't get it from the UK d/l site because my S/N matches the Hong Kong site. I live in the US and I'm not sure if I want a Hong Kong OS. I have honestly read through these forums and tried to get all my answers here .... but I just want to double check before I make a big mistake and blow up my phone. Thank you all.
Click to expand...
Click to collapse
don't worry, just run the USPL tool, after running this tool, it will reboot your phone automatically... Than flash your phone with a WM6 rom or the B&B rom... And thats it... make sure you backup your contacts before you do the flash, cause it will wipe all your contacts from your phone.
If you don't like the rom you flashed, just run USPL again, and flash it with another rom or back to factory rom.
If you've got any probs, just let us know... there is a lot of wizards out here, who are willing to help. You also can pm me anytime. I'm glad to help if I can.
cheers and goodluck
Beat me to it coolGadget!!
Anyway if you want to see how the Arteimg.nbh is used read this:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
You'll need a SD_card to do it.
Good luck, but you wont need it as you seem to have done your homework and as co0lGadget says if you get stuck we'll give you a hand.
macguffin said:
Beat me to it coolGadget!!
Anyway if you want to see how the Arteimg.nbh is used read this:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
You'll need a SD_card to do it.
Good luck, but you wont need it as you seem to have done your homework and as co0lGadget says if you get stuck we'll give you a hand.
Click to expand...
Click to collapse
Hey Matt, good to see you here... I didn't beat you mate... cause I was pretty sure, Wizards like you will be very helpfull too ;-)
You Guys are the best!
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
Don't worry u need Only 30 minutes for update Rom.But remember need Run USPL by Pof.When your Phone have SPL 1.11 u can update any Rom u like..!
Cheers..!
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
I think you have enough time, the whole procedure takes less than 15mins.
No need to take out the card, just follow the instructions above.
Good luck!
Cinamon said:
I have to leave for work in one hour - do I have enough time to do all of this? Will you guys be around if something bad happens? I can't imagine going even a day without my phone ... smile ... Should I take the microSD out first?
Thanks again
Click to expand...
Click to collapse
No need to take the card out.
You probably do have time USPL take about 3 mins flash of ROM takes about 10-15
However these things are always best to do if you're not in a rush or desperate to get your phone up and running. Also if you put tom's b&b on you'll need about 30 minutes to just play with it
tom_codon said:
Don't worry u need Only 30 minutes for update Rom.But remember need Run USPL by Pof.When your Phone have SPL 1.11 u can update any Rom u like..!
Cheers..!
Click to expand...
Click to collapse
When your Phone have SPL 1.11 - just in case you're wondering this is one of the red numbers you see when the phone first starts up, but you probably already knew that.
Holding my breath
OK, I'm going to do it - soft resetting now. But before I take the plunge, will you wizards please tell me - will I have the least problems with the UK WM6 release (which I found posted here as I can't d/l it from the site) or Tom's B&B which looks very cool but seems to have caused problems for some people. I trust your judgement - please tell me what you think. And btw, even though I'm old I love gadgets and cool tricks, so TouchFlo looks awesome to me, unless it is going to cause problems when installing files etc as I've read here.
Cinamon said:
OK, I'm going to do it - soft resetting now. But before I take the plunge, will you wizards please tell me - will I have the least problems with the UK WM6 release (which I found posted here as I can't d/l it from the site) or Tom's B&B which looks very cool but seems to have caused problems for some people. I trust your judgement - please tell me what you think. And btw, even though I'm old I love gadgets and cool tricks, so TouchFlo looks awesome to me, unless it is going to cause problems when installing files etc as I've read here.
Click to expand...
Click to collapse
WM6 is ok but not that different from WM5 to look at and I guarantee that by tomorrow you'll have wanted to see what tom's rom is like and had to re-flash.
Since using toms rom i've been able to dump a lot of my third party software (mostly stuff from spb) and as you say it's very cool to looks at and will impress all your friends.
OK Tom's it is .......
Cross your fingers for me please ....
Postponing the Flash
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Cinamon said:
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Click to expand...
Click to collapse
Hi Interesting...!
Take care..!
Cinamon said:
Before I took the first step, I realized that my phone was not seeing my SD card. I decided maybe I had not seated it properly. I put it back together but this time it did not see my SD card or my SIM chip. I put it back together more carefully now but decided that I don't want to rush this - will proceed when I'm home tonight.
Thanks again - you guys are the best. Hope one of you will be around when I'm really ready.
Click to expand...
Click to collapse
You probably has the WM5 bug or something. With the WM5 rom, sometimes it will mess up your sd card with folders in strange caracters etc...
But you're right, if you want to do this, and its your first time, you better do it when you're not in the rush... just prepare good, sit back and relax, and the flash will be good ;-)
I'm not sure if I'll be able to get online tonight... cause my internet is shut off since friday, my provider can't tell me where the problem is, and how to fix it... So I hope tonight after work, I'll be able to get online at home. And be able to help you out if needed... so fingers cross...
GoodLuck...
CoolGadget said:
You probably has the WM5 bug or something. With the WM5 rom, sometimes it will mess up your sd card with folders in strange caracters etc......
Click to expand...
Click to collapse
I've been watching this thread and sorry to hi jack the thread. But, this was one of my questions about updating ROMS from original WM5. I haven't gotten the phone yet (P3300), but I want to upgrade it to B&B when I get it. Should I run the patch for the card corruption fix before I do the USPL and ROM flash? Or just go strait to the USPL and ROM update?
I've been reading for a long time but I'm still not very clear on what programs to use to flash and all that. I also want to be able to store my original ROM just in case I want to revert back to OEM. How do I do that?
shawndh said:
I've been watching this thread and sorry to hi jack the thread. But, this was one of my questions about updating ROMS from original WM5. I haven't gotten the phone yet (P3300), but I want to upgrade it to B&B when I get it. Should I run the patch for the card corruption fix before I do the USPL and ROM flash? Or just go strait to the USPL and ROM update?
I've been reading for a long time but I'm still not very clear on what programs to use to flash and all that. I also want to be able to store my original ROM just in case I want to revert back to OEM. How do I do that?
Click to expand...
Click to collapse
who's your phone provider?
macguffin said:
who's your phone provider?
Click to expand...
Click to collapse
I'll be using it on T-Mobile, USA. The phone will also be purchased in the US.
BTW, Just to clarify, I'm buying the phone from an online store, so the phone will be unlocked. I'll have to reconfigure it to work with T-Mobile SMS and T-Mobile Web service.
Just run the USPL tool and then the rom of your choice.
If anything does go wrong you can get an original wm5 rom from here
http://rapidshare.com/files/17854890...0_wwe_ship.exe
If you brick your device just go into the bootloader screen and run this it will get you back to wm5 and you can try again.
macguffin said:
Just run the USPL tool and then the rom of your choice.
If anything does go wrong you can get an original wm5 rom from here
http://rapidshare.com/files/17854890...0_wwe_ship.exe
If you brick your device just go into the bootloader screen and run this it will get you back to wm5 and you can try again.
Click to expand...
Click to collapse
So I can't "dump" and store my own ROM? I have to download a dumped WM5 OEM from from someone else? I just wanted to make sure that I could put it back exactly the way it was just in case I needed to send it back or ship to HTC for repairs or something.
Also, will they be able to tell that the ROM was flashed and flashed back if I send it in for warranty repairs?

"The SIMUNLOCK"

I purchased this week a t mobile version of HTC artemis. as far as i know t mobile locks their phone, therefore i had searched XDA-DEV.. to find a free unlocking method apparently with no results. the only thing i found is method using a tool called SimLockTool_Artemis_Excalibur. As i understand many people looked and asked for that tool and because i found it somehow i just copy and paste link for those who still looking for it. Because i haven't got the device yet please report in any case of testing it.
Enjoy!
http://rapidshare.com/files/45997746/SimLockTool_Artemis_Excalibur.rar.html
need more?
i know that i haven't said enough for the tool. heres a thread that there is a discussion about the procedure you need to take.
http://forum.xda-developers.com/showthread.php?t=318679&page=1
zenonasz said:
i know that i haven't said enough for the tool. heres a thread that there is a discussion about the procedure you need to take.
http://forum.xda-developers.com/showthread.php?t=318679&page=1
Click to expand...
Click to collapse
This tool doesn't work. For that Info you just have to read the last Page of the toppic you linked...
Greets!
...<>...
This tool had been released by htc and its purpose is to lock your device by changing the IMEI but it also gives you the UNLOCK code for the specific IMEI.
I haven't test the tool yet cause i did not receive my device.
There is one thing that they haven't test yet, it says that you need to use the customized htc card which no one had to that.
zenonasz said:
There is one thing that they haven't test yet, it says that you need to use the customized htc card which no one had to that.
Click to expand...
Click to collapse
...and that's why it doesnt work (for us). we know what the tool is doing. but no one managed to run it from sdcard so far.
sd card
does anyone have any idea where to get that card?. i mean do you get it with htc p3300(not xda orbit mda compact 3 or any other versions)?
zenonasz said:
does anyone have any idea where to get that card?. i mean do you get it with htc p3300(not xda orbit mda compact 3 or any other versions)?
Click to expand...
Click to collapse
nope, i tried with unbranded devices from england and switzerland with the same results as with my orange branded device. the program isnt doing anything. maybe their hardware checks for some code file or something that has to be on the card. or even a special type of hardware... i gave up for now
Can you please tell me which files you copy to your sd card?
Copy only the Artediag and the diagdata. DoNOT copy the cstdata into the card and also remove it from the directory which the .exe file is.
just a thought that i made it may works.
Sorry did not receive my device yet...
it doesnt work. btw, if you read the manual, it says "Insert the HTC customized key card into SD card reader".
further down it says "After this process, you will find a cstdata.dat file into the key card".
i dont think that a normal SD card will work. i can only guess that they delivered those special "key" cards to the providers.
i found some information about the sd card bootloader of htc wallaby of on the net i like to share it with you and see if you could get something ou of it.
http://www.xs4all.nl/~itsme/projects/xda/wallaby-bootloader.html
have a look around the links and there some toolls that may be usefull.
The Sim Unlocktool for the Artemis is only to LOCK the device.. not to UNLOCK..
Thats SOMEHOW..... TRUE.... but it provides a known unlock code...
zenonasz said:
i found some information about the sd card bootloader of htc wallaby of on the net i like to share it with you and see if you could get something ou of it.
http://www.xs4all.nl/~itsme/projects/xda/wallaby-bootloader.html
have a look around the links and there some toolls that may be usefull.
Click to expand...
Click to collapse
why not YOU try to get something out of it? how many times do we have to tell you, it doesn't work. many in the artemis forum have already tried this tool and nobody got it to work. we don't need info about sd card bootloader of htc wallaby coz we also have our own info about sd card bootloader of htc artemis in the wiki page of this forum.
read my first post and you will see why i do not try the information i found.
did i got you upset with my post? if yes sorry m8 but the problem is not on me
zenonasz said:
read my first post and you will see why i do not try the information i found.
did i got you upset with my post? if yes sorry m8 but the problem is not on me
Click to expand...
Click to collapse
yes, i've read your first post... and my answer is, you should wait for your device so you could try this tool for yourself, since you don't seem to believe those who've said it doesn't work.
and, it's quite funny that you asked me to read your first post, when you're the one who's not really been reading posts in this forum. coz if you've been reading posts yourself, you'll find that this tool has been discusses MANY times in not just one, but several threads as well. and in all of these threads, it's been said that NOBODY got this tool to work. and starting another thread doesn't change that.
@redski Maybe all this you saying is due to the fact that i haven't got my device yet and not test the tool my self. I really need to hope that there is a method to unlock artemis, i do not care about the money 30 dollars in our days is not enough to buy cigarettes , i just like to it my self. About what you said that i do not read the post in this forum, thats not true, see how many post i have and i am a member almost a year now. I never post a thread to resolve an issue that i have without research.
we would all be happy if you find a way to make this work (once you get your device). i personally wont further try it until i see really new facts. there are highly competent people in this forum who tried this with no success. who would i be if i'd think i can make it run
redski said:
it's been said that NOBODY got this tool to work. and starting another thread doesn't change that.
Click to expand...
Click to collapse
Not true i see this soft working whit original htc sd card
zenonasz
Dont try do ask i dont have any file i wont give any file
chelas said:
Not true i see this soft working whit original htc sd card
Click to expand...
Click to collapse
yes, we know you already said that. but when i said NOBODY i meant those from this forum. unless you know somebody from this forum who got it to work?
and that's another problem we all have... the original htc card, which none of us have. that's why we can't get it to work.
redski said:
yes, we know you already said that. but when i said NOBODY i meant those from this forum. unless you know somebody from this forum who got it to work?
and that's another problem we all have... the original htc card, which none of us have. that's why we can't get it to work.
Click to expand...
Click to collapse
that mother **** ask me 2k for an sd card =(

Is it possible to change the ROM without activesync?

Hi, i have a T-Mobile MDA Compact III (UK), as original, and want to change it from WM5 to WM6, i have been reading through the forums, and havent heard anything from people being able to change it without a PC connection. I can charge off USB, but activesync doesnt find it (tried with known working cables, and different PCs). I have come to the conclusion that when i charge it in the car, its got broken (as mentioned on one of the threads).
So, is it possible to CID unlock/change the ROM from the Mico SD card?
Cheers,
I had the same problem, just bring it backk to T-mobile, they will fix it
You can update copying the new rom on the sd card and doing an hard reset. There is a thread about this.
ok, cheers guys i think i'll go pay t-mobile a visit so i can hack my phone lol
You can flash only 'official' new system by SD. I've tried to flash other .mbh (and USPL too) but it impossible ;((((
i can't find HTC service center in Moscow that can help me ;(
when official WM6 for HTC P3300 will out ???
alexhirurg said:
You can flash only 'official' new system by SD. I've tried to flash other .mbh (and USPL too) but it impossible ;((((
i can't find HTC service center in Moscow that can help me ;(
when official WM6 for HTC P3300 will out ???
Click to expand...
Click to collapse
The official WM6 is out already
http://forum.xda-developers.com/showthread.php?t=333803
I hope that the link on that thread still works.
Enjoy!

think i may have bricked my phone....

I tried to update my rom...now it gets to the windows mobile screen and hangs.. I can get it into bootloader screen.. The problem is i cant find an original rom to go back to.. my info was..
dopod p800w
rom 129.706.11chs
11/07/07
02.84.90
4.1.12.38
ext rom 1.29.706.111
Now in bootloader it says IPL 129.0001
SPL1.11.0000
usb will show up but not the thing in the upper right corner..?
Im a newbe and decided to jump in after seeing all the good luck that everyone has had..
Can anyone help..
new info..
I can get to bootloader screen hook up the usb and even synk with active synk 4.5 but as soon as i try the start uspl or the ruu my phone disconnects.
This is starting to drive my wife nuts ive been on the comp 4 about 18hrs in two days trying to figure this out...
should i just send it in to htc and have it reflashed???
Any ideas???
Found this for Dopod P800W
http://rapidshare.com/files/42891918/P800w_SEA_ENG_WM6_Upgrade_20070713.zip, if it has pass i think it is kastibong
Don´t know if it will help you.
Thanks ark 666,
If i have heard right i need to flash back to the chinese (chs)
then once im back to original i need to iemei unlock then i could use the rom in the link that you provided..Am i right??
thank you for taking the time to respond to me, I know you guys are well beyond us newbes and it can drive you nuts with the same old questions....
some of us really do appreciate it.
crazy4chevs said:
Thanks ark 666,
If i have heard right i need to flash back to the chinese (chs)
then once im back to original i need to iemei unlock then i could use the rom in the link that you provided..Am i right??
thank you for taking the time to respond to me, I know you guys are well beyond us newbes and it can drive you nuts with the same old questions....
some of us really do appreciate it.
Click to expand...
Click to collapse
Try this wwe rom, is for the same region as your device, with cht support, if this doesn´t work then wi´ll try to arrange the Chinese one.
Cheers.
Man, I thought i had it.. It finally went to the ruu on the boot loader screen started to update and got to 2%....
This is what it said
ERROR (244) : INVALID MODEL ID
This update utility cannot be used on your PDA phone. Please check your update utility click to exit..
DPRRH<68-ASVH55670-DPRRH568-ASVH5/01*
at least i got to see the ruu on the corner of the phone this time.
Any ideas what to do now?
I arranged this rom "P800_CHT_3.7.709.1 chs cust", i think it´s this one, it´s the most recent, , for p800w.
Though this one is CHT, CHS customized.
akk666,
Do you have a link for the rom in the last post?
maybe i could pm you so this post dosnt get to long..?
What do you think of this.....
szlcdn_p800_wm6_chs_1023.nbh
found it from here...
http://translate.google.com/transla....9966.org&hl=en&rls=RNWO,RNWO:2008-20,RNWO:en
what do you think??
Try it, maybe it´ll work.
http://www.4shared.com/file/111733762/5c488ad0/P800_CHT_377091_OS_CHSCust09.html
Havent quite figured out how to change out the nbh in the ruu to get either of those to load like complete ruu..
Is there a program that makes this more idiot proof to change the nbh?? That would be nice.
Type nbh in.. it takes you right to it highlighted, then it has you copy your new one and paste in a command line then asks if you want to replace it..
Man thats what sucks abt being a newbie is that it takes sooo long to figure things out 3hr 20 min and still at square one..
lots of links though
crazy4chevs said:
Havent quite figured out how to change out the nbh in the ruu to get either of those to load like complete ruu..
Is there a program that makes this more idiot proof to change the nbh?? That would be nice.
Type nbh in.. it takes you right to it highlighted, then it has you copy your new one and paste in a command line then asks if you want to replace it..
Man thats what sucks abt being a newbie is that it takes sooo long to figure things out 3hr 20 min and still at square one..
lots of links though
Click to expand...
Click to collapse
U could write it in chinese, that i would´ve understood the same.
Nothing.

Categories

Resources