Has anyone found a fix for "ERROR 114"? I cannot upload a radio ROM and receive a "NO GSM" message at the boot screen; also my device doesn't show any IMEI, although a still have the original box for the device with the IMEI on it. Can anyone help? Thank you.
EXEC/JASJAR said:
Has anyone found a fix for "ERROR 114"? I cannot upload a radio ROM and receive a "NO GSM" message at the boot screen; also my device doesn't show any IMEI, although a still have the original box for the device with the IMEI on it. Can anyone help? Thank you.
Click to expand...
Click to collapse
Have you READ here?:http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Hope it helps,
I've read through the forums quite a few times, but have not found any confirmed fix for this issue. I think that flashing through the SD with an "appropriate header" on the Radio ROM is the best idea; however, I've not been successful with a SD download (upload -> yes). I think it is a problem with the header of the ROM, but am stuck at this point. Any direction would be greatly appreciated.
Regards, .........
Related
i recently tried to update my universal, with the crossbow rom, after pluging the device in my desktop, it started with the update, and placing a message, connection erorr , resulting in ,that my device is stuck in the boot mode, and will not react anymore.
i have tried to update ,without result , i keep getting the message 150 connection error
id there anybody out therer who has had the same problem, if so did you fix , and how did you fix it?
regards peter
I will tell you what I did it my be wrong but I unpluged the usb from the uni and pushed the front light button,power button and the reset at the same time and pluged it in again you get the popup found new device ppc. Then reran the rom update.
NO, just take the SD Card out of the slot and proceed with the update. You must be using a 4GB SD Card, aren't you?
rom upgrade ,universal dead
i keep getting the following message, even if i take the 4gb sd card out of device:
error 150 rom upgrade utility error.
please help it is driving me crazy.
regards peter
pcsw said:
i keep getting the following message, even if i take the 4gb sd card out of device:
error 150 rom upgrade utility error.
please help it is driving me crazy.
regards peter
Click to expand...
Click to collapse
Hi, are you able to get in to the bootloader mode?
Try reading:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
Hope it helps.
Hi. I want to know if someone could help me to find the solution to this error message "Error [207 or 244]: Update Error". I allready try three diferents ROM's to upgrade de s620, but I couldn't.
I've attach an image of the screenshot showing the error message and the ROM's names complete.
Thx!
did you find a solution to this error?
jodoj80 said:
Hi. I want to know if someone could help me to find the solution to this error message "Error [207 or 244]: Update Error". I allready try three diferents ROM's to upgrade de s620, but I couldn't.
I've attach an image of the screenshot showing the error message and the ROM's names complete.
Thx!
Click to expand...
Click to collapse
First unlock your phone with SDA Application Unlock. Reboot and flash your phone.
Okay, I've searched alot to get this thing solved. When I try to update my rom, the update starts normally, but then my telephone screen turns black, my gets disconnected, windows tells me it has found new hardware. The update failes and returns error 260 (connection lost). When I soft-reset the telephone afterwards, it returns to it's old shape.
Info about my telephone.
Rom: 1.93.404.1 NLD
Radio: 1.0025.05
PC: Windows XP SP 3, Active Sync 4.5
I tried to update with this rom: RUU_Diamond_HTC_NLD_2.03.404.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I also tried to update to Hard-SPL but that gave me the same error.
PLease guys does anyone of you know how to fix this? (personally I think it's windows xp which is screwing up).
Thanks in advance, I appreciate all help.
Yours, Martijn.
Even the tiniest tip may help (A)
I had the same trouble with that rom, I tried from internal memory and it worked. Search the wiki I am sure the info is there.
"ERROR [260] : UPDATE ERROR
This error occurs when there is an "open port error" before upgrading the CE ROM image. Solution: You can reset the device and run RUU again. If you still encounter an "OPEN PORT ERROR" again, reset your computer and try again."
This is what the WIKI tells me. But I have tried that. How did you manage to perform the update on the internal storage? Because I tried that with hard-spl but it wouldn't work.
Besides I only have .exe files for the Hard-Spl and the official rom from HTC.
Thanks for your reply though.
EDIT PART, just read this on another thread in the wiki:
ERROR 260 (Update Error):
"Your phone is not connected to ActiveSync. Check your connection or restart the phone. Also make sure in ActiveSync that "Allow USB connections" is checked (under File->Connection Settings). If this still doesn't help, then remove the memory card and SIM card before flashing."
I'm going to try this now, if it worked, I'll let you know
Just found out I have a CDMA version or something, I'll try google for the problem now.
Get the rom image from your temp directory and look here, found in the wiki
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
dickenz said:
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
Click to expand...
Click to collapse
It looks alot like your problem yes. But last time the hardware installed correctly, then the patch I found for CDMA models on ppcgeeks failed, and my telephone got bricked. So I'll need to get that fixed first. After that I'll sure think twice before I try another rom update :/
Thanks for all the help though, and I have to advice everyone to not use the hard-spl for cmda users from ppcgeeks unless you're 100% sure it fits your model!
Every time I try a Firmware upgrade my P320 I get the "No GSMFFS" error and the installation stops.
Can someone help me understand what GSMFFS is???
Also is there a way to fix this error??? I am getting the Bootloader prompt. It is even finding the image files. But then it says " No GSMFFS. 3 images found" and stops executing.
On a related topic. There seems to be an option to Upgrade the firmware using USB... Has anyone successfully done that???
Please advice!
Joe!
Someone Anyone???
HI,
Is anyone else having a problem accessing QXDM? I have had it on my computer for a few months now, used it numerous times, and have never had any problems what so ever until yesterday. Now anytime I try to open QXDM I get an error that says "Error Initializing DAIG server". Did my copy of the program get corrupted or something? I can not figure this out for anything so I figured I would enlist the help of people smarter than I am.
If anyone reads this and you have QXDM on your computer could you please try and access it and let me know your results? I am trying to narrow things down and figure out if this is a problem on my end (I cant access it on my laptop or desktop) or if maybe there is something wrong with QXDM right now and it is just down. I have tried downloading other versions (everything except 2.08 or whatever it is and I am going to try that but it probably wont work either) and they all give me a message when installing saying "Warning: License not generated. Then if I try to start QXDM I get the same error again.
For the record, QPST works just fine, I thought that may have had something to do with it but I do not think so now.
Any and all help would be greatly appreciated and I DO know how to use the thank you button! Thank you in advance also.
*EDIT* Thanks to the awesome members on here I fixed it!
im having the same problem could you help me?