Develop Bugs

How to Arabize the new ROM

Any help Pls???

a regular install ??
have u tried installing the arabyising suite from imaginet, regularly... ?
u mentionned previously u would install a w2003se, is such a rom available ?

I'm downloading the Arabizer from Imaginet now and will install it as soon as the download completes, but I doubt it will work properly as it is made for windows mobile 2003 and not 2005.
Unfortunately ther is no such Rom "2003" for Jasjar.... if it were there, it would have been much much faster and reliable.
Regards,
Khaled.

arabizer from jasjar extended rom
u can get the arabizer cabs from the erom of jasjar, i have them i can send them via e mail , i think they r too large to post as attachements here. my email is : [email protected]
salam
dr. mohamed eldardiri

Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki

Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki

they worked properly with me
i installed only 3 cabs , successively : the one with 1- acert, 2- acert2 , then 3- Ado , in this order, with no interruption inbetween, then i reset , it worked properly, i didnt use other cabs , as i used third party dictionary and calenders and stuff ... so i only installed the cab of my local provider , so that i be able to use wi-fi, everything is ok now. i installed the old imaginet arabizer , but it didnt work at all , and i hard reset.
one question though , i need to know how to use the arabic hardware keyboard as there s no alt key.
salam

Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.

Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.

Mohammad,
One of our room mates suggested me a solution, I tried it and it worked better than the default Arabizer which comes with the original old rom .
If you're interested to view the solution you can access it from this link:
http://forum.xda-developers.com/viewtopic.php?t=43213
Thanks again for your valuble support.
Regards,
Khaled.

arabic hardware keyboard
hello khalled
i was wandering if the new arabizer suite u installed supported the hardware arabic keyboard, coz i failed to use it using the default cabs. i knew that the shortcut keys are (shift+Sym) but it didnt work ...
salam

Hello Dr. Dardiri,
I installed the Arabizer from Imaginet web site, and I can tell you that it's much better than the one came with the I-mate rom.
But unfortunately I tried the hardware Arabic Keyboard but didn't work with me.
I will report this to the i-mate website support and see the result.
Salam,
Khaled.

Install VoIP after flashing ROM?

Hey Guys!
I flashed Pandora Naked ROM few days ago. But sadly there is no VoIP function included. Is it possible to install a VoIP driver after flashing ROM or does the voip function have to be included in the ROM?
If it is possible to install the 'driver' after flashing, do you know a tutorial or do you have a suitable cab for me??
Thx a lot!!
Kaimane

Kaimane said:
Hey Guys!
I flashed Pandora Naked ROM few days ago. But sadly there is no VoIP function included. Is it possible to install a VoIP driver after flashing ROM or does the voip function have to be included in the ROM?
If it is possible to install the 'driver' after flashing, do you know a tutorial or do you have a suitable cab for me??
Thx a lot!!
Kaimane
Click to expand...
Click to collapse
http://www.google.com/search?as_q=v...rum.xda-developers.com&as_rights=&safe=images

and a more specific to hermes search could be:
http://www.google.com/search?hl=en&...e:http://forum.xda-developers.com&btnG=Search
hope you find your answer.
Berd

Is it correct to use this file WM6VoIP.CAB first and after that the SIP Config Tool 2.0.1 (or would you prefer SIPConfigTool 2.0.0?)? Are there still problems with this programs (sry, but I dont want to read more than 100 pages to know that this solution is working). I'm asking because there are some posts which describes problems / a not correctly working with that tools.
Thank you for your help!!
Kaimane

Kaimane said:
Is it correct to use this file WM6VoIP.CAB first and after that the SIP Config Tool 2.0.1 (or would you prefer SIPConfigTool 2.0.0?)? Are there still problems with this programs (sry, but I dont want to read more than 100 pages to know that this solution is working). I'm asking because there are some posts which describes problems / a not correctly working with that tools.
Thank you for your help!!
Kaimane
Click to expand...
Click to collapse
Not sure either way.
I just was trying to help you out in finding your answer.
I don't usually have any concerns trying different cabs, or the such, because I do a Sprite Backup before trying anything.

I installed WM6VoIP.cab first and after that Sip Config Tool 2.0.1. Than I did a soft reboot, setup the VoIP settings via the config tool and everything works.
But ... The bandwidth is too slow! Is there a possibility to reduce the voice quality that the used bandwidth become more less?
Kaimane
Sry for my bad english ... I hope you understand my problem

windows Live 6.1

Anybody up to making a windows live cab from wm 6.1..
Windows Live Messenger Cab 10.6.0034.0800

Can´t install it
I got the cab but shows unsuccessful install...
do you have it working?

we actually would need the cab to check. this thread asks if anyone has made a cab for the new live? maybe you would be so kind as to provide it

For sure. Where is the cab?

I´m sorry for my bad English
Seems like I missunderstood the original post, I tought that the cab in Matt´s kitchen was the good one. Sorry for the confussion

I tried the one in Matts Kitchen and it worked fine for me. The problem is that it is Build 0600 and not 0700

What is the newest version?
I have installed 10.6.0030.2100 on wm 6.1 and its working correct..

TripleQ said:
What is the newest version?
I have installed 10.6.0030.2100 on wm 6.1 and its working correct..
Click to expand...
Click to collapse
Like to know this also..
My version: Windows Live (10.6.0033.0600)

The newest version of windows Live messenger is 10.6.33.0700 only found in Schap's WM6.1 Pro 4.40 Beta ROM. The Feature that appeals to me is that it has a dropdown box that gives you a choice of , Hotmail, MSN, and Live, . TNT says this will be in his new Wizard Rom Windows Live Messenger 10.6.0034.800, must be the newest, also Khans 2.3 Wizard version has 10.6.0034.800 with the drop down box.

Is it possible to make a cab file of the newest?

m0nkm0nk said:
Is it possible to make a cab file of the newest?
Click to expand...
Click to collapse
I'd like to learn to make a cab file..... I did find the IE 6.1, but still haven't found the SMS 6.1 ...... If anyone has a link to someplace that can help me learn to create a cab file that would be helpful.
Chris

noellenchris said:
I'd like to learn to make a cab file..... I did find the IE 6.1, but still haven't found the SMS 6.1 ...... If anyone has a link to someplace that can help me learn to create a cab file that would be helpful.
Chris
Click to expand...
Click to collapse
hello!
to make a cab is not a big deal!if you have wincecab manager it's preatty easy but you must search some tricks over the net!i would glady help you but i'm not so good in english language so i better stay away!if you need wincecab manager you can find it here
IM a naughty XDA member that posted warez!!!
NO WAREZ ON XDA

Mate, whilst applauding your kindness in helping out your fellows, I think you should edit and delete your post in case you get a bit of a hullaballoo started.
Mustn't post links warez like that on here, mods are quite adamant about it usually.

pashamangl said:
hello!
to make a cab is not a big deal!if you have wincecab manager it's preatty easy but you must search some tricks over the net!i would glady help you but i'm not so good in english language so i better stay away!if you need wincecab manager CeCabManager
Click to expand...
Click to collapse
Thanks for the response! I will look for WinCECab and give it a go. You can edit your post and remove the download links to the Warez... I wouldn't want to anger the Modz...
I can't wait to start dabbling with these cabs.....lol .... I'm sure I'll be Hard reseting a few times after I apply some of my new cabs....lol
Chris

what's new in new build ?

i don't have a time for creating a cab, but maybe the package will be useful for some of you to create a cab
attached, enjoy.

Well thanks TNT! It's a good start, someone will probably beat me to it though. I'm at work and won't be able to get to this till tonight or 2morrow.
Chris

Xda 2?
Does this one work on the xda 2? If not is there any msn i can install for it? Please help.

Thanks a million TNT

you are welcome
i want to tell that this build has many fixes with new features were not there in previous versions.

[REQ] Programming a new Manilla (2.5 if possible) tab

Hi all,
this is my first thread and I start with a question and request at the same time.
After searching the forum for something like that, I couldn't find anything that could help me.
I know that is possible to create a manilla (2.5?) tab?
If so, could you give me some guidelines about it?
I'm currently working on a new application that I would like to integrate with manilla.
Thank you in advanced

? anyone ?

Don't know if it can help you but Zal has done a 15-tabs theme (see here).
It was for the 1.3 version of Manila i think...
It does'nt work for Manila 2.1 and higher...
Maybe Zal can help you ?
But no news of him since January...
Another solution (same ?) but always for manila 1.3 is here.

[Q][Sense 2.5] require[...] ?

Hi @all,
I've donwloaded the manila kitchen and also the current release of the manila package.
Now I want to write a new Tab and have some big problems with that. I hope you can help.
1st I've thought about looking into existing code (eg Twitter Tab). There I've my first problem. They use a script file called machine_status_svc, CLuaTweetList_svc and CLuaTweetEdit_svc (used in "5518259a_manila" or "twitterutil.luac"). They also use a function called CLuaTweetList_Instance() and I think which is included in CLuaTweetList_svc.
Now my problem: I can't find these files. Can anybody help?
2nd I've check the registry on my mobile and found the key HKLM\Software\HTC\Manila\HTCService. There are some dll files registered. I think they will work as background service during the manila is running. Now I want to write this kind of service too.
So does anybody know how these dll file have to be implemented? which procedures/functions are required and which aparameters etc?
I still have som other questions, but maybe I can solve them if I've got a reply to these at first.
I'm sorry but I don't find anything in the web about there questions.
I hope for your help! - Thanks!

Does maybe anybody know if HTC is providing these information?
If yes does anybody maybe also know a direct contact address (e-Mail) to get it?
Thanks :'(