Related
Hi all,
I have an big probleme with my HTC diamond !
if i flash my BASE rom firmware my HTC reboot with the same message :
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
* my version is MicroP-Diam (LED) v11*
if you have rom version for update it thanks or over solution !
I have allways make : Hard reboot and soft reboot , changing firmware ect ......
kenshiromasters said:
Hi all,
I have an big probleme with my HTC diamond !
if i flash my BASE rom firmware my HTC reboot with the same message :
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
* my version is MicroP-Diam (LED) v11*
if you have rom version for update it thanks or over solution !
I have allways make : Hard reboot and soft reboot , changing firmware ect ......
Click to expand...
Click to collapse
I'm not sure what ur saying, but if you flashing a htc stock rom its possible cant update because of region specific, if you havent have hardspl installed try and flash again,
duttythroy said:
I'm not sure what ur saying, but if you flashing a htc stock rom its possible cant update because of region specific, if you havent have hardspl installed try and flash again,
Click to expand...
Click to collapse
Mine is also MicroP-Diam (LED) v11 and flashing is no problem for me. Try using Hard-SPL like Dutty suggests ...
I have exactly the same problem.
Even while updating the screen is black.
kenshiromasters, did you fix the problem?
Thanks,
Is there a solution for this problem yet?
Mine started doing the same thing today.
MicropERROR
Microp Version Mismatch 0
Please update Latest Microp Firmware
EDIT: Installed hard SPL and it didnt fix it
The same problem
Me too!
Some time, the screen in black, only can hear the music-volumen up/down.
I try battery off/on severy times to get a typical error:
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
Hi there,
unfortunately I'm facing the same problem.
the screen effectively is black, but I can see homepage etc as it's in standby.
MAYBE, but it's only in my mind, we could fix the problem installing windows mobile 6.1 professional.
But the problem is: who has wm 6.1 professional?anyone can post the link for download?
his this been fixed? i am having the same problem!
trying to reload duttys v3.4 right now...
and yes, im using hard spl dev ed
update:
just reflashed to dutty's 3.4, still the same problem.
seems like the phone is working because it will make the power on noise when i turn it on, but the screen isn't showing anythign again.
great...nice brick i have on my hands here :|
Got the same problem after flashing Dutty´s 3.4 - after first restart display was only "very dark" that I even could read it - "microp version mismatch 0 - update microp firmware", after second reboot the display is off permanently I flashed originila stock ROM and then signed SPL but the problem is still same... Really don´t know what to do now. How to upgrade "micorp firmware"???
edited: How did You all guys have fix that?? Is there any way instead of send it for warranty repair?? Here in Czech I´m worryin about the time of repair - and guess it will take probably one month n I can´t miss my phone for so long time:-((((
So please does anbybody know if it is SW or HW problem?? If it could be solved without repair by authorized service???
Problem hasn't got anything to do with coocked roms, hardspl or whatever....I had the problem too and had original 1.37 and 1.93 stock rom on my Diamond (Dutch). Had it send to HTC's repair lab in Belgium (www.eurotwice.be) but they couldn't repair it. Got a new one because of extenden/extra warrenty I bought when I bought my phone and cellurar subscripton with my telco.....
sounds like the hermes whitescreen problems that have been solved..
my 0,02
Allright, i guess we have to find a connection between these problems. Other then that their all Touch Diamonds of course...
Anyhow, if everyone with this problem can fill in the following:
- Do you use a HardSPL / Custom ROM?
- Have you ever flashed your device?
- Is your diamond of a special brand? (like T-mobile or Sprint)
- When did you purchase your phone?
Maybe we can find somekind of link...
keerttttt said:
Allright, i guess we have to find a connection between these problems. Other then that their all Touch Diamonds of course...
Anyhow, if everyone with this problem can fill in the following:
- Do you use a HardSPL / Custom ROM?
- Have you ever flashed your device?
- Is your diamond of a special brand? (like T-mobile or Sprint)
- When did you purchase your phone?
Maybe we can find somekind of link...
Click to expand...
Click to collapse
I used HardSPL 1.40 Olinex, Dutty´s 3.4 ROM, my device flashed manytimes without any problems, Diamond is not branded a I purchased it here in Czech in e-shop (English version).
tommm said:
I used HardSPL 1.40 Olinex, Dutty´s 3.4 ROM, my device flashed manytimes without any problems, Diamond is not branded a I purchased it here in Czech in e-shop (English version).
Click to expand...
Click to collapse
OK, so:
- Do you use a HardSPL / Custom ROM?
Yes, HardSPL 1.40 Olinex, Dutty´s 3.4 ROM
- Have you ever flashed your device?
Yes, see 1
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
???
And, for the record... You do have the microP problem right?
keerttttt said:
OK, so:
- Do you use a HardSPL / Custom ROM?
Yes, HardSPL 1.40 Olinex, Dutty´s 3.4 ROM
- Have you ever flashed your device?
Yes, see 1
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
???
And, for the record... You do have the microP problem right?
Click to expand...
Click to collapse
Yep my Diamond is dead
Not "fully dead" - is detected by PC so I flashed back stock SPL and ROM - both 1.93
It seems that PDA is working, but nor display neither buttons light
Ok today I sent it to warranty service n will see...I only hope that when i was flashing back stock ROM n stock SPL without display it was succesfull
I have the same problem.
so:
- Do you use a HardSPL / Custom ROM?
I use the original HTC ROM
- Have you ever flashed your device?
No
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
?
Leeroy_ said:
I have the same problem.
so:
- Do you use a HardSPL / Custom ROM?
I use the original HTC ROM
- Have you ever flashed your device?
No
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
?
Click to expand...
Click to collapse
send it back under warranty then
HI Guys,
I brought a o2 XDA diamond recently, and surprised to see only German Language support on WM 6.1 Os that it has originally flashed.
It seems that HTC supprt also cant help neither the o2 customer care to change the language to English.
As i dont know German, i am finding it very difficult to use.
I desperately want to change to English user interface. However iam afraid of breaking my device completely.
My device is having following specs
OS: WM 6.1 proffesional
CE OS 5.2.19965(Build 19965.1.2.3)
ROM version : 1.93.207.2 GER
ROM Date:8/12/08
Radio: 1.00.25.05
protocol: 52.29.25.12H
Model nr: xda_diamond
PlatformocketPC
I saw many threads on ROM development and followed following procedure.
1. upgraded to Hald SPL by following instruction from http://www.modmydiamond.info/, now my bootloader shows.
Red
diam300 mfg 64M
SPL-1.40.oliNex
MicroP-diam (LED) v11
Green
PSOC -diam STAGE_PVT v0x32
After this step when i tried to update the ROM by using the RUU from,
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Dia mond_52.29.25.12_1.00.25.05_Ship.exe
and
RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.0 0.25.05_Ship.exe
I get following error:
244 : Invalid device ID
And i am unable to update any ROM.
Could anyone from this expert forum please help me? I have following basic questions.
1.Whats wrong with my update process?
2. Which RUU to use to switch to english version?
3. How to get rid of eror 244 Invalid device id?
Request you to please help me out!
Again for those who continue to get stuck.....
Please use Internal Method for flashing
This forum as an awesome Search Feature, that few people take advantage of ......this topic has been covered over 10 times per day. Examples could be found quickly through the use of Search
Hi band27,
Thanks for your reply!
I tried searching "Internal Method for flashing" but i cud not find any useful information.
I saw one more post from you which talks abt using NBHUtil.zip , should i use this utility?
Please help please!
It's actually not a Utility but an instruction:
Yes, follow it. Go all the way to step 8 for Roms. Ignore step 8 if you are flashing a Radio.
Hi band27,
My bootloader shows following info. Is there still a possibility of bricking the device while programming? Now what can brick my device? Just want to be carefull.
red =diam300 mfg 64M
SPL-1.40.oliNex
MicroP-diam (LED) v11
Green PSOC -diam STAGE_PVT v0x32
Thanks
Diamond Man:
----------------------------------------------------------------------------------------------------------------------------------------------------
OS: WM 6.1 proffesional
CE OS 5.2.19965(Build 19965.1.2.3)
ROM version : 1.93.207.2 GER
ROM Date:8/12/08
Radio: 1.00.25.05
protocol: 52.29.25.12H
Model nr: xda_diamond
PlatformocketPC
diamond-man said:
Hi band27,
My bootloader shows following info. Is there still a possibility of bricking the device while programming? Now what can brick my device? Just want to be carefull.
red =diam300 mfg 64M
SPL-1.40.oliNex
MicroP-diam (LED) v11
Green PSOC -diam STAGE_PVT v0x32
Click to expand...
Click to collapse
You are fine.....you have Hard SPL (SPL-1.40.oliNex)
You're protected so go ahead.
Last question.
Hi band27,
Many thanks for your prompt replies!
One last thing i want to ask is, Which RUU will be best for me to change to English language?
Is the EUROPE RUU in English? Or i will have to use ME-WWE version?
Also Can you tell me what does following means? As this is the case with me.
"Make note of the Target CID, Version, Language and Chunk Size. FYI the Model ID is the problematic setting here. If it says DIAM10000 and you have a DIAM300 you're screwed."
Thanks for the ansver in advance!
Hi band27,
Many thanks for your prompt replies!
One last thing i want to ask is, Which RUU will be best for me to change to English language?
Is the EUROPE RUU in English? Or i will have to use ME-WWE version?
Click to expand...
Click to collapse
I don't have much experience with changing languages but the RUU_ is not responsible for this....it's the actually ROM that determines what language you are after.
"Make note of the Target CID, Version, Language and Chunk Size. FYI the Model ID is the problematic setting here. If it says DIAM10000 and you have a DIAM300 you're screwed."
Click to expand...
Click to collapse
Not sure who quoted you all this but CID = Country ID. Don't recall the chunk size significance of the top of my head. Lastly DIAM 100, DAIM300 is just your Devices versions / affiliations from where the device is from.
band27 said:
I don't have much experience with changing languages but the RUU_ is not responsible for this....it's the actually ROM that determines what language you are after..
Click to expand...
Click to collapse
By RUU i means ROM, yes its the ROM inside the RUU package.
But which ROM should i use EUROPE or WWE-ME. Is Europe ROM in English?
band27 said:
Not sure who quoted you all this but CID = Country ID. Don't recall the chunk size significance of the top of my head. Lastly DIAM 100, DAIM300 is just your Devices versions / affiliations from where the device is from.
Click to expand...
Click to collapse
this is from the famous thread that you asked me to follow.
http://forum.xda-developers.com/showthread.php?t=409425
as my device is DIAM300 and there was a note from the author posted above, warning that
"Make note of the Target CID, Version, Language and Chunk Size. FYI the Model ID is the problematic setting here. If it says DIAM10000 and you have a DIAM300 you're screwed.
"
Thanks in advance!
Diamond-man
WWE Roms are in English. Which language are you looking for?
Update the HardSPL
Please update the hardspl from 1.40 to 1.93 first.
Done.
rushy said:
Please update the hardspl from 1.40 to 1.93 first.
Click to expand...
Click to collapse
Thank u.
Rgds
I'm up rom Tmobile dash 6.1, but error 294.
I'm want find ROM WM 6.0 standard old of Tmobile dash _china
Screen:
ONBL 1.33.0000
SPL 1.33.0000
Please, help me!!!!
Thanks!
Bien_irt said:
Im up rom Tmobile dash 6.1, but error 294.
Im want find ROM WM 6.0 standard old of Tmobile dash _china
Screen:
ONBL 1.33.0000
SPL 1.33.0000
Please, help me!!!!
Thanks!
Click to expand...
Click to collapse
Welcome to the forum
May I ask why that ROM having here great 6.1´s?
I recommend you to read the Wiki
My phone is T-mobile dash (China).
Before upgrading my rom speeds up in the chip 264, in the process of upgrading rom (version v1.7 rose) and then failed to appear as follows:
- Upgrade process is running, the sudden end, and then restart when the logo appears only HTC and always turn off the source.
- I manually reset (hold 2 keys) appears reset the notification requirements click Send, I have made but only HTC logo appears as before.
- I use the USB key and keep the color photographic images appear 3 scratch and color parameters as follows:
+ Excalibur ONBL 1.33.0000
+ Excalibur SPL 1.33.0000
+ Excalibur IU
and a small scratch with white text below the USB screen
I was trying to find the original ROM of your device without.
Who can help me how do solve this problem is not?
Thank you very much!
Just as orb3000 said check the link below...
http://forum.xda-developers.com/showthread.php?t=397583
Thank orb3000 and johnambler41577 !
I have read and check the wike but all original ROM still not compatible with my phone. Too sad!
Need ideas help of experts!
hi guys.
i got indian 2g diamond(diam 140).
not i got it 2nd hand from someone. and i find its security unlocked and a preinstalled 1.20.Olinex radio already exists. also its hard spl 1.40.
read a few threads but nothing was much clear.
many ppl claimes that updating to any other custom rom will stop all networks and my diamond will stop getting any networks on any other roms.
i took the risk and flashed it with swtos lite rom and till now everything is working.
now i want to change the radio to somwthing better than the current one.
is it possible that this time i may lock my phone to all netwoorks??
Security Unlock is NOT sim unlock. If the guy told u that it's unlocked to all the networks already then switching radios does nothing to interfere with that.
Switch Radios and let me know how it goes.
I bought a touch diamond 'unlocked' with 1.20.Olinex, I couldn't get my network to register.
I have since paid for Oliinex's unlocking, however my fone will still not connect to ANY network. I believe Olipro is trying to help me solve the dilemna...
I would say if ur happy with ur ROM/Radio now DO NOT flash it until someone confirms that you will not brick ur phone....
Consider that it has the Olipro 1.20 it should have Hard SPL on it already. But if you can, put your device into BOOTLOADER mode (Soft Reset then press the volume down button) please write what you see on the rainbow like screen and then we can take it from there.
band27 said:
Consider that it has the Olipro 1.20 it should have Hard SPL on it already. But if you can, put your device into BOOTLOADER mode (Soft Reset then press the volume down button) please write what you see on the rainbow like screen and then we can take it from there.
Click to expand...
Click to collapse
in bootloader i get:
Security Unlocked
DIAM140 MFG 64M
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
how do i know if its sim unlocked??
sunnyin86 said:
in bootloader i get:
Security Unlocked
DIAM140 MFG 64M
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
how do i know if its sim unlocked??
Click to expand...
Click to collapse
I should say that it is already Sim unlocked as the purpose of the installed Radio is mainly used for that.
dont worry,.just continue . i had the same diamond specs as yours .updated it yesterday . works like a charm!!
my post in the formatting diamond thread
. i followed TNYYNT's "[TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!" and karkalanand's airtel upgrading guide. i have the fastest ROM aztors X2 ULTIMATE and blackstone 1.11.25.01 radio . no problems ,and 1.37 olinex dev edition
didnt brick my phone hopefully
i thank you people for giving me the real DIAMOND EXPERIENCE
band27 for that line gven above
olipro for his sim/cid/security unlocking tools
olipro+cmonex for the oLineX
TNYYNT for the wonderful upgrading guide
karkalanand for the AIRTEL diamond guide(without which i wouldnt have upgraded my diamond)
and ALPHAZERO for creating one of the fastest ROM
lastly - to XDA DEV
-------------------------
now on 2.xx AZTOR X2
bs radio
1.37 olinex
but still an INDIAN diamond !
hey. here is another problem.
i also wanted to buy diamond 3g. a friend of mine is offering me diamond 3g which is security unlocked but am not sure if its sim unlocked. only vodafone and idea networks worked on it and not airtel. so i tried updating its radio to 1.11 and also its rom to swtos lite and now even vodafone and idea is not working on it.
that is no operator network works on it now. what do i do.? also i wanted to tell u that this model is the testing model which htc released to ppl who review the device before its launched. does it makes any difference?
also is it sure that it is sim locked and OLIPRO's sim unlocker will solve my problem?
i used hard spl 1.4 olinex and sucessfully
then i upgraded radio to 1.00.25.05
and then in installed wmpoweruser new 6.5.3 rom
but after flashing phone stucked on touch diamond screen and nothing happens.whats the probelm ? please help me.is for one my freinds and i promised a good rom to him and now its broken.
Use mtty procedure from this post: http://forum.xda-developers.com/showthread.php?t=540290
Or more simple write a original htc rom.
lordsinasina said:
i used hard spl 1.4 olinex and sucessfully
then i upgraded radio to 1.00.25.05
and then in installed wmpoweruser new 6.5.3 rom
but after flashing phone stucked on touch diamond screen and nothing happens.whats the probelm ? please help me.is for one my freinds and i promised a good rom to him and now its broken.
Click to expand...
Click to collapse
hard reset the device once and boot again.... post back if its stuck... will see what we can do..